IPhone 5S keyboard freeze
hi friends, i have a problem about keyboard on iOS 8.1.1 for last 2 weeks. When i use keyboard wheth message app or the others it freezes for 3-4 seconds, but if I press any button while freezing it writes that letters after freezing gone. It really suck, how can I fix this problem does anyone have idea? I tried the turning off iCloud documents and settings but I couldnt found it on settings.
Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).
Similar Messages
-
Iphone 6 keyboard freezes when horizontal
this happens randomly, I have Iphone 6 with ios8.1, keyboard freezes when phone is horizontal. Has been this way ever since getting the phone, started on ios 8.01.
Do you have a specific app that might cause it to go funny, try un-syncing apps then see if it sires it, if it does bring them back one by one. i had a similar issue with an app that caused screen to lock out.
-
IPhone 6 - keyboard freezes in landscape
I searched and found lots of old keyboard talk, but nothing answering this.
Upgraded to iPhone 6. The keyboard works perfectly when holding the phone in normal use position (portrait). But when I rotate the phone to lanscape position, it usually just freezes. Keyboard appears but nothing happens when you press keys. Rotate back to portrait, works fine. Every once in a while, but rarely, the keyboard will work in landscape. I've tried installing two third party keyboards, same issue with them. I've tried hard reset, no fix. It did this with original software and continues after 8.0.2 install.
I haven't seen anyone else talk about this problem. Is it just me? Anyone have ideas on a fix?
RIckDo you have a specific app that might cause it to go funny, try un-syncing apps then see if it sires it, if it does bring them back one by one. i had a similar issue with an app that caused screen to lock out.
-
IPhone 4 keyboard freeze, runs slow and crashes - is there a fix?
Not been able to use my iPhone 4 for over a week now originally due to the screen freezing on "enter passcode" page. The probelm has escalated to keyboard and generally unable to use the handset in any reliable way. Please point me in the right direction to fixing this.
Symptoms and log of activities in chronological order;
- the arrow freezes when "slide to unlock". This would persist over a period of time (a day to 7-8 days), first incident around April. After many manual resets, able to access without the arrow freezing. Observed that this kept happening after the iPhone has been switched off.
- the above problem returned last week after the device was switched off then back on. This time, the arrow freezed for 15-30 seconds then "enter passcode" page appeared. The keyboard that appears is unresponsive so nothing happens when you press the buttons. The text entry cursor does not blink. iPhone eventually crashes with a spinning loading sign on freeze.
- cannot switch off phone, unless with hard reset by holding the home + on/off buttons. - the same issue returns immediately.
- restoring iPhone (first time) - required to update to IOS 5.1.1. Still the problem persists
- appointment with Genius bar - explained the problem. Does not take a look at the handset once but offers a replacement at a cost.
- Suspect it might be a glitch rather than a hardware damage (it's only under 8 months old) so attempts another restore. This time, set up/configure screen comes up on the device. Chooses not to set passcode. Screen is responsive, able to choose launguage, country etc... Hope returns, it actually seems to be working. Slide to unlock, takes 15-30 seconds but does unlock. Able to open and delete emails and SMS texts. Apps such as facebook seems to be working although generally everything is slow.
- HOWEVER, keyboard across all apps unresponsive and text entry cursor does not blink. The apps crashes then returns to home screen.
- Deleted emoji international keyboard in the hope that the keyboard problem would go away.
- After a number of crashes, the screen is black. The Backlight of the screen is on but unable to switch off or do hard reset.
From deduction, the problem seems to be with the keyboard across all apps.
Has anyone had similar problems and did you find any fixes?
I really don't want to have to pay for another replacement so please please, do share your knowledge. Thank youHi linkslice,
Funny you say that... the iPhone's audio out was playing up, not recognising the headphone. I switched the iPhone off to shine some light down it to see if something had gone down it and that's how the problem of rebooting itself started.
I took it into Apple store yesterday to the Genius bar and they carried out a few tests. They suspected it to be a software issue but the diagnostic returned clean so uploaded new firmware. The problem still persisted so they had to look inside. He returned 10 mins later with the following results; all looked fine on the inside, once put back together, the screen was not responsive and rebooting continuously. They couldn't figure out what was wrong with it so I've now got a replacement handset which is working fine after a restore from backup.
I suggest you take it into the store to have it looked at. Let us know if there was a solution to yours.
Thanks all for your help. -
Hello
My iPhone 6 64 GB keyboard is freezing while I am writing. I have updated from iOS 8.1.2 to iOS 8.1.3 but the problem still is not going. Also I have tried to reset all settings and there is no advantage.
Please helpI have the same problem. Not sure if this would work for you, but turning iCloud back up OFF was my temporary quick fix (Settings > iCloud > Backup > OFF).
Hope it helps, I know the frustration of the freezing keyboard. -
Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!
Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!
-
IOS 8.3 keyboard freezes - iPhone 6
Has anyone else experienced the keyboard freezing after using an emoji on the new iOS 8.3? It freezes on the emoji keyboard, showing "emoji added", and I can't get back to the alpha/numeric keyboard to type text. I touch the globe (and everything else) but nothing happens.
There have been posts like yours after every update since iOS 1.0.1, 2007. The problem is corrupted data or settings during the update. Downgrading, even if supported, wouldn't help at all.
Assuming the phone was never hacked/jailbroken (the most common cause of your issues), try these steps as needed:
Reset phone (no data loss): press both the home and lock buttons for at least 10 seconds, releasing when the Apple logo appears
Settings > General > Reset > Reset All Settings
Restore to factory settings using iTunes, also restoring a backup
Restore to factory settings as new (no backup restored)
Use iTunes to restore your iOS device to factory settings -
this is my replacement phone I replaced my first phone due to incredibly low volume! The phone volume seemed alittle better for about ten hours then got just as bad! But now, on this phone, I have a keyboard problem! When I'm using mail, it freezes numerouse times while I'm typing! Its like it has to catch up and I'm definatly no speed types yet in iphones keyboard, athough I am getting better as the days go on! Anyone else with freezing keyboard?
Have any of you noticed this correlation, keyboard freezes frequently under these circumstances:
1. You are replying to an e-mail thread that is very long. i.e. you have exchanged several e-mails with the same person and the trail has gotten long (say, over a page).
or
2. You are replying to a message with alot of HTML graphics in it. i.e. you're replying to an e-mail sent by someone from E-bay, that has all the pictures, and logos in it.
I'm getting a high correlation between stalling and one of these circumstances.
Anybody else? -
My ATT Iphone 3GS keeps freezing and shutting down, now won't turn on at all. tried to do an update and restore but it froze in restore at about 20% done, waited 5hrs for it to go, it didn't. Not sure what to do or where to go (ATT or Apple) to get help, how much it could cost? HELP PLEASE!
Did you follow the steps in iOS: Unable to update or restore?
-
[SOLVED] Laptop keyboard freezes randomly.
I have Arch dual booted with Windows 8.1 on an Asus K53SM laptop.
Laptop specs are:
* Intel i5 2nd Gen @ 2.5 GHz
* 8GB RAM
* 750 GB Hard disk
* nvidia GT630M 2GB
Right after installing Arch, I installed GNOME as the DE and everything was working fine. Recently, I uninstalled GNOME and installed KDE. I'm experiencing random keyboard freezes. I've tested it with a USB keyboard, so it is not a hardware issue I guess.
* The [<Super> + S] combination to display all workspaces works fine.
* So does the <Alt> + F2, to write commands, but the keys don't work (so can't type anything there).
These freezes are totally random, and the keyboard works fine after 1-2 minutes. Here is the output for Xorg.0.log ->
[ 21.228]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 21.228] X Protocol Version 11, Revision 0
[ 21.228] Build Operating System: Linux 3.17.6-1-ARCH x86_64
[ 21.228] Current Operating System: Linux ape 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 21.228] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=92ae3f1c-0f63-4de9-9323-487d50c0bd60 rw quiet splash usbcore.old_scheme_first=1
[ 21.228] Build Date: 11 February 2015 08:10:00AM
[ 21.228]
[ 21.228] Current version of pixman: 0.32.6
[ 21.228] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.228] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.228] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 15 20:18:09 2015
[ 21.333] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.333] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.440] (==) ServerLayout "X.org Configured"
[ 21.440] (**) |-->Screen "Screen0" (0)
[ 21.440] (**) | |-->Monitor "Monitor0"
[ 21.456] (**) | |-->Device "Card0"
[ 21.456] (**) |-->Screen "Screen1" (1)
[ 21.456] (**) | |-->Monitor "Monitor1"
[ 21.456] (**) | |-->Device "Card1"
[ 21.456] (**) |-->Input Device "Mouse0"
[ 21.456] (**) |-->Input Device "Keyboard0"
[ 21.456] (==) Automatically adding devices
[ 21.456] (==) Automatically enabling devices
[ 21.456] (==) Automatically adding GPU devices
[ 21.679] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 21.679] Entry deleted from font path.
[ 21.679] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 21.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.718] Entry deleted from font path.
[ 21.718] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.728] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 21.728] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 21.728] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 21.728] (WW) Disabling Mouse0
[ 21.728] (WW) Disabling Keyboard0
[ 21.739] (II) Loader magic: 0x819d80
[ 21.739] (II) Module ABI versions:
[ 21.739] X.Org ANSI C Emulation: 0.4
[ 21.739] X.Org Video Driver: 18.0
[ 21.739] X.Org XInput driver : 21.0
[ 21.739] X.Org Server Extension : 8.0
[ 21.742] (EE) systemd-logind: failed to get session: PID 301 does not belong to any known session
[ 21.743] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 21.745] (--) PCI:*(0:0:2:0) 8086:0126:1043:212e rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 21.746] (--) PCI: (0:1:0:0) 10de:0de9:1043:212e rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 21.746] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.763] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 21.763] (II) LoadModule: "glx"
[ 21.856] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.220] (II) Module glx: vendor="X.Org Foundation"
[ 22.220] compiled for 1.16.4, module version = 1.0.0
[ 22.220] ABI class: X.Org Server Extension, version 8.0
[ 22.220] (==) AIGLX enabled
[ 22.220] (II) LoadModule: "intel"
[ 22.220] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 22.286] (II) Module intel: vendor="X.Org Foundation"
[ 22.286] compiled for 1.16.3, module version = 2.99.917
[ 22.286] Module class: X.Org Video Driver
[ 22.286] ABI class: X.Org Video Driver, version 18.0
[ 22.286] (II) LoadModule: "nvidia"
[ 22.286] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 22.367] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 22.367] compiled for 4.0.2, module version = 1.0.0
[ 22.367] Module class: X.Org Video Driver
[ 22.374] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 22.375] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 22.375] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 22.375] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 22.375] (II) NVIDIA dlloader X Driver 346.35 Sat Jan 10 20:32:18 PST 2015
[ 22.375] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 22.386] (++) using VT number 7
[ 22.429] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 22.483] (II) Loading sub module "fb"
[ 22.483] (II) LoadModule: "fb"
[ 22.483] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.502] (II) Module fb: vendor="X.Org Foundation"
[ 22.502] compiled for 1.16.4, module version = 1.0.0
[ 22.502] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.502] (II) Loading sub module "wfb"
[ 22.502] (II) LoadModule: "wfb"
[ 22.502] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 22.510] (II) Module wfb: vendor="X.Org Foundation"
[ 22.511] compiled for 1.16.4, module version = 1.0.0
[ 22.511] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.511] (II) Loading sub module "ramdac"
[ 22.511] (II) LoadModule: "ramdac"
[ 22.511] (II) Module "ramdac" already built-in
[ 22.704] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 22.704] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 22.704] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 22.704] (==) intel(0): RGB weight 888
[ 22.704] (==) intel(0): Default visual is TrueColor
[ 22.705] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 22.705] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 22.705] (II) intel(0): Enabled output LVDS1
[ 22.705] (II) intel(0): Output VGA1 has no monitor section
[ 22.705] (II) intel(0): Enabled output VGA1
[ 22.705] (II) intel(0): Output HDMI1 has no monitor section
[ 22.705] (II) intel(0): Enabled output HDMI1
[ 22.705] (II) intel(0): Output DP1 has no monitor section
[ 22.705] (II) intel(0): Enabled output DP1
[ 22.705] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 22.706] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 22.706] (II) intel(0): Enabled output VIRTUAL1
[ 22.706] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 22.706] (==) intel(0): TearFree disabled
[ 22.706] (==) intel(0): DPI set to (96, 96)
[ 22.706] (II) Loading sub module "dri2"
[ 22.706] (II) LoadModule: "dri2"
[ 22.706] (II) Module "dri2" already built-in
[ 22.706] (II) Loading sub module "present"
[ 22.706] (II) LoadModule: "present"
[ 22.706] (II) Module "present" already built-in
[ 22.706] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 22.706] (==) NVIDIA(1): RGB weight 888
[ 22.706] (==) NVIDIA(1): Default visual is TrueColor
[ 22.706] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 22.740] (**) NVIDIA(1): Enabling 2D acceleration
[ 22.740] (EE) NVIDIA(1): Failed to initialize the GLX module; please check in your X
[ 22.740] (EE) NVIDIA(1): log file that the GLX module has been loaded in your X
[ 22.740] (EE) NVIDIA(1): server, and that the module is the NVIDIA GLX module. If
[ 22.740] (EE) NVIDIA(1): you continue to encounter problems, Please try
[ 22.740] (EE) NVIDIA(1): reinstalling the NVIDIA driver.
[ 24.454] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24.455] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 24.456] (II) NVIDIA(1): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
[ 24.456] (--) NVIDIA(1): Memory: 2097152 kBytes
[ 24.456] (--) NVIDIA(1): VideoBIOS: 70.08.92.00.fa
[ 24.456] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 24.461] (--) NVIDIA(1): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
[ 24.461] (--) NVIDIA(1): CRT-0 (boot, connected)
[ 24.461] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.461] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 24.461] (**) NVIDIA(1): device CRT-0 (Using EDID frequencies has been enabled on
[ 24.461] (**) NVIDIA(1): all display devices.)
[ 24.463] (==) NVIDIA(1):
[ 24.463] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 24.463] (==) NVIDIA(1): will be used as the requested mode.
[ 24.463] (==) NVIDIA(1):
[ 24.463] (II) NVIDIA(1): Validated MetaModes:
[ 24.463] (II) NVIDIA(1): "CRT-0:nvidia-auto-select"
[ 24.463] (II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
[ 24.473] (WW) NVIDIA(1): CRT-0 does not have an EDID, or its EDID does not contain a
[ 24.473] (WW) NVIDIA(1): maximum image size; cannot compute DPI from CRT-0's EDID.
[ 24.473] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
[ 24.473] (--) Depth 24 pixmap format is 32 bpp
[ 24.515] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 24.515] (==) intel(0): Backing store enabled
[ 24.515] (==) intel(0): Silken mouse enabled
[ 24.516] (II) intel(0): HW Cursor enabled
[ 24.516] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.524] (==) intel(0): DPMS enabled
[ 24.525] (==) intel(0): display hotplug detection enabled
[ 24.525] (II) intel(0): [DRI2] Setup complete
[ 24.525] (II) intel(0): [DRI2] DRI driver: i965
[ 24.525] (II) intel(0): [DRI2] VDPAU driver: i965
[ 24.525] (II) intel(0): direct rendering: DRI2 enabled
[ 24.525] (II) intel(0): hardware support for Present enabled
[ 24.525] (--) RandR disabled
[ 24.525] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 24.525] (II) NVIDIA: access.
[ 24.529] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 24.529] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 24.529] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 24.530] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 24.530] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 24.530] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 24.530] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 24.530] (II) NVIDIA(1): Config Options in the README.
[ 24.536] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 24.649] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 24.649] (==) NVIDIA(1): Backing store enabled
[ 24.649] (==) NVIDIA(1): Silken mouse enabled
[ 24.649] (==) NVIDIA(1): DPMS enabled
[ 24.663] (II) Loading sub module "dri2"
[ 24.663] (II) LoadModule: "dri2"
[ 24.663] (II) Module "dri2" already built-in
[ 24.663] (II) NVIDIA(1): [DRI2] Setup complete
[ 24.663] (II) NVIDIA(1): [DRI2] VDPAU driver: nvidia
[ 24.663] (--) RandR disabled
[ 24.872] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 24.872] (II) AIGLX: enabled GLX_ARB_create_context
[ 24.872] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 24.872] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 24.872] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 24.872] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 24.872] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 24.872] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 24.872] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 24.872] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 24.872] (II) AIGLX: Loaded and initialized i965
[ 24.872] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 24.873] (II) AIGLX: Screen 1 is not DRI2 capable
[ 24.873] (EE) AIGLX: reverting to software rendering
[ 25.619] (II) AIGLX: Loaded and initialized swrast
[ 25.619] (II) GLX: Initialized DRISWRAST GL provider for screen 1
[ 25.634] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25.640] (II) intel(0): Setting screen physical size to 361 x 203
[ 25.988] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.988] (II) LoadModule: "evdev"
[ 25.988] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.030] (II) Module evdev: vendor="X.Org Foundation"
[ 26.030] compiled for 1.16.2, module version = 2.9.1
[ 26.030] Module class: X.Org XInput Driver
[ 26.030] ABI class: X.Org XInput driver, version 21.0
[ 26.030] (II) Using input driver 'evdev' for 'Power Button'
[ 26.030] (**) Power Button: always reports core events
[ 26.031] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 26.031] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.031] (--) evdev: Power Button: Found keys
[ 26.031] (II) evdev: Power Button: Configuring as keyboard
[ 26.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 26.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.031] (**) Option "xkb_rules" "evdev"
[ 26.031] (**) Option "xkb_model" "pc104"
[ 26.031] (**) Option "xkb_layout" "us"
[ 26.086] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 26.086] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.086] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.086] (**) Video Bus: always reports core events
[ 26.086] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 26.086] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.086] (--) evdev: Video Bus: Found keys
[ 26.086] (II) evdev: Video Bus: Configuring as keyboard
[ 26.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event6"
[ 26.086] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 26.086] (**) Option "xkb_rules" "evdev"
[ 26.086] (**) Option "xkb_model" "pc104"
[ 26.086] (**) Option "xkb_layout" "us"
[ 26.087] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 26.087] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.087] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.087] (**) Video Bus: always reports core events
[ 26.087] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 26.087] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.087] (--) evdev: Video Bus: Found keys
[ 26.087] (II) evdev: Video Bus: Configuring as keyboard
[ 26.087] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input13/event5"
[ 26.087] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 26.087] (**) Option "xkb_rules" "evdev"
[ 26.088] (**) Option "xkb_model" "pc104"
[ 26.088] (**) Option "xkb_layout" "us"
[ 26.088] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 26.088] (II) No input driver specified, ignoring this device.
[ 26.088] (II) This device may have been added with another device file.
[ 26.089] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 26.089] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.089] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.089] (**) Sleep Button: always reports core events
[ 26.089] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 26.089] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 26.089] (--) evdev: Sleep Button: Found keys
[ 26.089] (II) evdev: Sleep Button: Configuring as keyboard
[ 26.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 26.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.089] (**) Option "xkb_rules" "evdev"
[ 26.089] (**) Option "xkb_model" "pc104"
[ 26.089] (**) Option "xkb_layout" "us"
[ 26.090] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.090] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 26.090] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[ 26.091] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event12)
[ 26.091] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[ 26.091] (II) Using input driver 'evdev' for 'USB 2.0 UVC VGA WebCam'
[ 26.091] (**) USB 2.0 UVC VGA WebCam: always reports core events
[ 26.091] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event12"
[ 26.091] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5710
[ 26.091] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
[ 26.091] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
[ 26.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input19/event12"
[ 26.091] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 10)
[ 26.091] (**) Option "xkb_rules" "evdev"
[ 26.091] (**) Option "xkb_model" "pc104"
[ 26.091] (**) Option "xkb_layout" "us"
[ 26.092] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 26.092] (II) No input driver specified, ignoring this device.
[ 26.092] (II) This device may have been added with another device file.
[ 26.093] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 26.093] (II) No input driver specified, ignoring this device.
[ 26.093] (II) This device may have been added with another device file.
[ 26.093] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 26.093] (II) No input driver specified, ignoring this device.
[ 26.093] (II) This device may have been added with another device file.
[ 26.094] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
[ 26.094] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 26.094] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 26.094] (**) Logitech USB Optical Mouse: always reports core events
[ 26.094] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event13"
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 26.094] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 26.094] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 26.094] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 26.094] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046D:C05A.0001/input/input20/event13"
[ 26.094] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 26.095] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 26.095] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 26.096] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[ 26.096] (II) No input driver specified, ignoring this device.
[ 26.096] (II) This device may have been added with another device file.
[ 26.096] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 26.096] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 26.096] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 26.096] (**) Asus WMI hotkeys: always reports core events
[ 26.096] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 26.096] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 26.096] (--) evdev: Asus WMI hotkeys: Found keys
[ 26.096] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 26.096] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"
[ 26.096] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 26.096] (**) Option "xkb_rules" "evdev"
[ 26.096] (**) Option "xkb_model" "pc104"
[ 26.096] (**) Option "xkb_layout" "us"
[ 26.097] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.097] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.097] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.097] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.097] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.098] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.098] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.098] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.098] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.098] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 26.098] (**) Option "xkb_rules" "evdev"
[ 26.098] (**) Option "xkb_model" "pc104"
[ 26.098] (**) Option "xkb_layout" "us"
[ 26.099] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 26.099] (II) LoadModule: "synaptics"
[ 26.099] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.109] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.109] compiled for 1.16.0, module version = 1.8.1
[ 26.109] Module class: X.Org XInput Driver
[ 26.109] ABI class: X.Org XInput driver, version 21.0
[ 26.109] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 26.109] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.109] (**) Option "Device" "/dev/input/event7"
[ 26.210] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762 (res 52)
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902 (res 83)
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 26.210] (**) Option "TapButton1" "1"
[ 26.210] (**) Option "TapButton2" "2"
[ 26.210] (**) Option "TapButton3" "3"
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.210] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.263] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event7"
[ 26.263] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.264] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.264] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 26.265] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.265] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 26.265] (II) No input driver specified, ignoring this device.
[ 26.265] (II) This device may have been added with another device file.
[ 26.282] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[ 26.282] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.282] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 26.282] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[ 81.255] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 81.255] (II) intel(0): Printing DDC gathered Modelines:
[ 81.255] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 81.277] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.293] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.644] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.660] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.678] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 84.668] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 84.685] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 86.539] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2962.717] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2962.734] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2966.160] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2966.176] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3045.352] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3045.370] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3066.487] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3066.504] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4507.909] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4507.925] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4568.870] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4568.887] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4749.685] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4749.702] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4841.172] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4841.189] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5067.684] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5067.701] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5098.091] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5098.108] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5231.697] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5231.715] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7726.903] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7726.920] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7989.858] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7989.875] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8118.003] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8118.020] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8525.573] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8525.590] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8645.496] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8645.513] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8787.791] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8787.808] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10010.206] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10010.223] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10511.439] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10511.456] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10576.580] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10576.597] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10758.287] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10758.304] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 12833.372] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 12833.389] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 14722.424] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 14722.441] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 15499.091] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 15499.108] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16138.293] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16138.309] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16563.842] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16563.858] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17097.871] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17097.888] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17958.793] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17958.810] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18046.490] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18046.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18286.639] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18286.655] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18857.140] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18857.157] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19683.981] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19683.997] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19746.465] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19746.483] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19801.499] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19801.516] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24516.593] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24516.610] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24714.424] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24714.440] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24733.954] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24733.970] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24794.748] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24795.935] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24795.935] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24795.971] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 24796.039] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 24796.039] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 24796.039] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 24796.039] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 24796.039] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 24796.039] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 24796.039] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 24796.040] (II) NVIDIA(1): Config Options in the README.
[ 24796.057] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24796.061] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 25764.817] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 25766.007] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 25766.007] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25766.036] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 25766.104] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 25766.104] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 25766.104] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 25766.104] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 25766.104] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 25766.104] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 25766.104] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 25766.104] (II) NVIDIA(1): Config Options in the README.
[ 25766.122] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 25766.129] (EE) evdev: Logitech USB Optical Mouse: Unable to open evdev device "/dev/input/event13".
[ 25766.129] [dix] couldn't enable device 11
[ 25766.129] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 25766.132] (II) config/udev: removing device Logitech USB Optical Mouse
[ 25766.132] (II) evdev: Logitech USB Optical Mouse: Close
[ 25766.132] (II) UnloadModule: "evdev"
[ 27662.047] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 27663.314] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 27663.314] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 27663.345] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 27663.413] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 27663.413] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 27663.413] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 27663.413] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 27663.413] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 27663.413] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 27663.413] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 27663.413] (II) NVIDIA(1): Config Options in the README.
[ 27663.431] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 27663.439] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27694.770] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
[ 27694.770] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27694.770] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 27694.770] (**) Logitech USB Optical Mouse: always reports core events
[ 27694.770] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event13"
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 27694.770] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 27694.770] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 27694.770] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27694.770] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27694.770] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046D:C05A.0002/input/input39/event13"
[ 27694.770] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 27694.771] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 27694.771] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[ 27694.771] (II) No input driver specified, ignoring this device.
[ 27694.771] (II) This device may have been added with another device file.
[ 28826.102] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28826.119] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28869.273] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28869.290] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29665.856] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29665.873] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29759.751] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29759.768] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 30246.231] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 30246.248] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 31539.152] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 31539.168] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 33130.297] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 33130.314] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 35115.805] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 35115.822] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 36739.995] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 36740.011] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37099.972] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37099.988] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37115.693] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37115.709] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37292.799] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37292.816] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37896.583] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37896.600] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40947.452] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40947.469] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40999.729] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40999.746] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41027.146] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41027.163] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41198.146] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41198.162] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41405.365] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41405.382] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43125.113] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43125.128] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43212.374] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43212.391] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 44006.946] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 44008.163] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 44008.163] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 44008.193] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 44008.262] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 44008.262] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 44008.262] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 44008.262] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 44008.262] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 44008.262] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 44008.262] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 44008.262] (II) NVIDIA(1): Config Options in the README.
[ 44008.280] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 44008.287] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
Please help me to resolve this.
Last edited by vortex_ape (2015-02-22 14:39:47)I haven't been experiencing the issue for some hours.
The issue occurred more frequently when I was compiling something. When I tried to reproduce the issue, it didn't occur.
The interesting thing to note is that I updated the system twice in the past 2 days. I checked the pacman log and saw that xorg-server-common, xorg-server, xorg-server-devel were among the upgraded packages. I guess they were causing the problem.
I'll need to test for a couple of days though before I consider the issue to be resolved. I'll update if the issue persists. -
My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?
1. If you are really on iOS 7.1, you may wish to try upgrading to 8.1.2 which is the latest (basing this on your signature).
2. If updating the phone doesn't help, is this only when you connect to a specific wifi network? Or all wifi networks (including public with no password)? If it is ALL wifi networks, you may have a hardware problem. Genius bar would be the next step.
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID -
My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?
Possibly faulty charger. The supplied Apple Charger is covered by the iPhone Warranty. Make Genius reservation or set up service and take or send iPhone and Charger to Apple for resolution.
-
Hi All
I get my macbook in just under 3 days it is a white 2.00Ghz Core 2 Duo, 1GB RAM, 120GB Hard drive model, it will also be running Mac OS X Leopard
I was wondering if the keyboard freezing problem occurs on all Macbook's & Macbookpro's models or is it a certain some, of are all of them doomed.
if we are then will I be able to install my copy of Mac OS X Tiger on the macbook, I'm asking this because I don't think tiger comes with the new X3100 graphics drivers for the Santa Rosa chips in the macbook.
Can someone explain also why it only seems to be happening only in Leopard and when will we see a fix for it from Apple
Thanks R NicholsonLauraford, you seem to be having a similar problem to many other people here. Check out this thread: http://discussions.apple.com/thread.jspa?messageID=5786564
-
My iPhone 4 keeps freezing and I can't seem to turn the phone off. How can I resolve this issue?
Did you try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
If this does not work, connect in recovery mode and restore: iPhone and iPod touch: Unable to restore -
On starting up my new iPhone 4s, it freezes on the apple logo. I have tried the reset buttons trick and have tried restoring again too but neither works. Any other ideas? Or is the phone simply corrupt in some way?
Did you try to connect in recovery mode and restore without using the latest backup?
Recovery mode and How to back up your data and set up as a new device
If setting up as new device does not work, you'll have to get it serviced or looked at by visiting an Apple Store.
Did you try to remove the ipsw firmware file and restore, to make iTunes download a new copy from Apple?
Those files are located here:
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.
Windows 7 and Vista
iPhone
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
Note: If you don't see the AppData folder, you may need to show hidden files.
Message was edited by: Ingo2711
Maybe you are looking for
-
How to set a background image to fill the entire screen on any device in a spark mobile application
Hi, I started developing a mobile application with Flex. I'm trying to set a background image to fill the whole screen. I've been stucked at this point for days now. I tried everything and no solution seems to work for me. I'm using a TabbedViewNavig
-
My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff... I feel like there must be an issue with the library location, but I don't know how to correct that. My Dad recently wiped my computer and dele
-
How do I submit a Report link with a URL for one of the values
Hi -- I have a Report link on a column, and I want to set an item to one of the report columns which contains URL values (like "http://...."). If I do that, the URL ends up in the hyperlink and is not escaped, so the colon confuses things. How do I g
-
DISABLE" ALL user web/internet addresses/sites in a PDF?
Professionally & Personally - I use, make, and Read many PDF files daily [reports, documents, & books]; I have many "many" thousands of PDF documents in my Archives. A. Background: 1. I have heard, since Acrobat 5, many security specialist have de
-
Cannot CREATE UNIQUE INDEX; duplicate keys found
I have 10g when I did an expdp from prod (an AIX 5.3 ) and impdp to a test (a RHEL3 ) with TABLE_EXISTS_ACTION=TRUNCATE, there are some index errors ORA-01452 for some of the tables but not all. As I compared the difference between , The only differe