IPhone 5S no longer charges with Verizon Car Charger
I bought my iPhone 5S the day it came out and everything has worked smoothly until about two weeks ago when my iPhone refused to take a charge from my iPhone Verizon brand car charger. I have not updated the software recently. It was already up to date. This is the Verizon car charger that was sold as a bundle when I purchase the phone. I would understand a little better if the car charger did not work when I purchased but now I am confused. Does anyone know a fix for this?
Hi,
The iPhone says that some chargers may not be authorized and therefore may not charge (paraphrase) but I don't see the lightning bolt next to the battery. The Apple charger that comes with the phone works and my larger iPad charger also works with it.
There is not visible damage to the car charger and I do not remember mishandling it in any qay.
I hope that helps.
MZ
Similar Messages
-
Ipod touch won't charge with a car charger
Have 2 Ipod touches (same model), one will no longer charge with a car charger, charges fine with wall charger and computer, I know it's not the charger as it charges the other ipod touch with no problem, have tired restore, etc and still nothing helps.
It should work. See here: https://discussions.apple.com/thread/3044169?start=0&tstart=0
B-rock -
Can an iPad be charged with a car charger
Can an iPad be charged with a car charger
Car charger
http://store.apple.com/sg/product/H1061LL/A?fnode=3c
http://store.apple.com/sg/product/H0955PA/A/griffin-powerjolt-plus-for-ipad-ipho ne-and-ipod?fnode=3c -
Does Classic charge with a car charger?
Having found that my Classic won't charge while off, I am wondering whether there is another software glitch. My Classic won't charge from the micro USB auto charger I used for my Bold 9900. I just got a new car charger from Crackberry and when I plugged it in low and behold although the LED was lit, the Classic would not charge. Is this another software problem with charging on the Classic?
Solved!
Go to Solution.Thanks for reaching out edtheman55!
To confirm, no lighting bolt appears when the device is turned on and connected to the car charger?
If possible can you share some details about the car chargers you are using? Any make, or model #'s would be helpful.
@bobtor, the log you sent me has been attached to your case. If possible can you let me know the make or model # of the car chargers you were using as well so I can do some testing? Thanks!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog -
My iphone 5 no longer syncs with my car stereo.
I'm unable to link my phone through my usb port to my stereo. I had no problem with my iphone 4s. I'm assuming its the new connector. I'm wondering if a new adapter fix the problem?
OK. Purchased the adapter and still doesn't sync to my car stereo. I'm considering sending the phone back for another 4s unless someone has a solution. I'm driving a 2010 Altima with Bluetooth capability, but the music has to be sync through the USB.
-
Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?
So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...
-
Why is iPhone 5 no longer functioning with AirDrop
Is there a reason iPhone 5 no longer functioning with AirDrop when it did before?
After managing to get it to charge 100%, i realise the connector in the iphone is lose, it moves from left to right, only charges when moving to the right, def a lose connection on iphone. Speaking to customer services
-
I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem.
Any ideas I'm pulling my hair out !!!Seems to be a hardware issue and you'll have to get it checked by visiting an Authorized Apple Service Provider, an Apple Store , to see if other 3rd party charger will work at their place.
iPhone - Contact Support - Apple Support -
My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?
Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling -
with the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks
update : so after reading numerous posts, I tried unchecking entire playlist and just tried one of my playlists. That sync seemed to work, so I rechecked entire playlist and did the sync. It worked. Then I went in to my "walk to work" playlist and added some songs to see if it would sync now, and it did!!! so happy now. will see what happens tomorrow.
-
Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook2010 Calendar and Outlook2010 Contacts. I don't know what else to try, short of resetting the iPhone and completely reloading as a new device. Any ideas, anyone?
It's good to know. The Apple instructions for loading iCloud on a PC just seem to have either overlooked or hidden this limit. The larger problem is that it partially works: partially and erratically. So clean-up is great fun.
-
After my last iOS update my iphone 4 no longer syncs with my macbook. How do I fix that?
Is the device recognized in iTunes? What happens when you try to sync? What have you done to try and correct it? Before anyone can recommend anything, they need to know a little more information.
-
i kept my iphone on my table so with a half charged battery. I picked it up and it would not turn on then i charged it about an hour but still is not turning on.is it a battery problem? please help!
Press and hold both the home and power button until the apple symbol shows up, about 15 seconds.
-
I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?
I have to ask,
Are you making sure you are in park before attempting the sync? The car won't allow you to do it in motion, whether or not you're the passenger. -
Why iPhone 5 not charge with its own charger but will with iPhone 4 charger
why iPhone 5 not charge with its own charger but will with iPhone 4 charger. Thanks to the member who posted that fix.
It sounds to me like the charger that came with the iPhone 5 is defective, or the cable is if you've been switching the cables when you switch the chargers.
Regards.
Maybe you are looking for
-
Ask about PF-STATUS in ALV LIST DISPLAY
Hi gurus, I have a code like below : REPORT zmm_qi_un2. TABLES : zqi01. TYPE-POOLS: slis. data : itab like table of zqi01 with header line. CONSTANTS : sym_checkbox VALUE '9', sym_large_square VALUE 'W', sym_locked VALUE 'H'.
-
In one of Tim's blobs (XMLP 5.6.3 for EBS hits the streets) this was mentioned as a new feature: "Conditional Formatting Enhancement in RTF Templates Now in addition to the xsl:if statement, you can also use the "It...Then...Else" construct in RTF Te
-
Help needed in writing a query
Hi all, Following is the structure of my table. Data Key Number Id Number Value varchar2(100) activity_name varchar2(100) Creation_Date Date Eval_Point varchar2(100) In the above table Id is the primary key. The column eval_point holds only two types
-
It's finally finished and it works!!!
Earlier today, I was stuck in the same mess many are - error messages that would not allow me to "restore" after it appeared I'd backed up and downloaded the new software. I gave up and went about my day. Late tonight, I tried again and this time it
-
Setting property attribute values for multiple selected objects.
Hello, Is there an easy way to set the attribute property values for more that one selected Table Operator Attribute (column) at a time. For example the target table has over 100 columns but I only want to INSERT/UPDATE 10 of those columns. The gener