Iphone 5s not starting after update to 7.0.6

updated my iphone 5s to ios 7.0.6 via itunes. after finishing the update and after filling the location details only white screen is coming up with black apple logo.
nothing is happening after that.....
dont know what to do plz helpppp.

Hello Ashish48,
Thank you for using Apple Support Communities.
For more information, take a look at:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Have a nice day,
Mario

Similar Messages

Iphone 5 wont start after updating ios7.04v

My Iphone 5 would not start after updating it to ois 7.0.4. It says i need to connect to itunes but when i do it asked me to restore to my original settings. when i tried doing that my iphone keeps crashing

Hello shefali,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

ITunes 10.1.2 not starting after update

iTunes will not start after being updated to 10.1.2. Also experienced internet explorer being extremely slow. Tried to repair the installation, but same result. Uninstalled iTunes, restarted the computer, and internet explorer started working again. Reinstalled iTunes from Apple web page. Same result as after update. Everything worked fine before update, no errors during installation.

I have just had exactly yhe same problem.
Try this!
Go to the itunes support page and uninstall / reinstall Itunes + quicktime exactly to the troubleshooting instructions.
It takes some time and patience but it works on my Vista operating system. Windows 7 should also work as the instructions refer to both systems.

Firefox does not start after updates

Every time i get an update, download it and restart Firefox, it does not restart and i have to run the set file again. It means too that the updates have not been dowl=nloaded !
Windows 7 ultimate. 4Gb ram 1 Tb Regards

I AM ABSOLUTELY SICK-SICK-SICK OF THIS PROBLEM. I HAVE TRIED EVERYTHING BUT IT STILL DOES NOT RESTART AFTER UPDATES. I HAVE DELETED/CREATED NEW PROFILES, DONE CLEAN INSTALLS - NO CHANGE!!!
I HAVE CHECKED FOR VIRUSES - NOTHING. CLEAN. I AM ABOUT READY TO GIVE UP AND SEND A LETTER TO A LOCAL TECH/MEDIA PERSON SO THAT THEY CAN WRITE AN ARTICLE ABOUT THIS ISSUE THAT FOR SOME REASON MANY OTHERS HAVE AS WELL AND YOU=MOZILLA HAVE NOT OFERED ANYTHING CLOSE TO A SATISFACTORY RESPONSE, EXPLANATION, FIX, ETC ETC ETC

Computer will not start after update. Won't boot. Security Update. Grey.

This is a fix that worked for me. 2 times in the past Automatic Software update has corrupted my hard drive.
When installing using SOFTWARE UPDATE the installer for the security update fails, says it has been moved to trash and to try again. Well if you restart, you get a system hang and much sadness.
I tried the usual stuff, booting from CD(osx) and selecting the disk utility from the top menu. But that didn't fix it. Then I ran DiskWarrior, which usually fixes anything, but it didn't this time.
Here is what did work. I checked my other mac to see what the last security update was, and it had the 2009-001 update (worked on that mac). So I knew now that the one that screwed up was that update.
I downloaded that update to my laptop.
I started my iMac (the one that crashed after update) in "target disk mode" - this treats the whole computer as an external firewire disk drive (it's totally safe as long as you don't erase anything) - you start into target mode by holding down "T" key while turning on, leave it pressed until you see a symbol on the screen that looks like a "Y".
I hooked up a firewire cable from the iMac to my laptop and waited until the iMacs Hard drive appeared on the laptop desktop.
Now you can browse the corrupt drive just like a regular external drive.
If you have an external drive with room, this is a good time to back up the entire corrupt drive to a folder on the other external just in case...
But what I have found is that when the installer for the security update failed, it corrupted the file that mac osx needs to read during boot, so it is an isolated failure, but it is always better to be safe.
at this point you are ready to attempt the repair..
On my laptop I ran the installer for the security update I had manually downloaded from apples site. When asked for destination for the install I select the HD for the iMac (or whatever unit has the no boot situation that got corrupted). (note that if you have not renamed your main hard drives, you will have a choice of 2 with the same name). Usually the drive on the computer you are using will be first in line. Rename the drive on the computer you are using before running the install if you want to be sure there are no mistakes..)
Select the disk you want to (re)install to, and let it go. It is a long update, so be patient and let it finish. It should say preparing install, installing, finishing, and optimizing system performance...
When it says that the installation completed successfully you can eject the corrupt hard drive by dragging to the trash to dismount it. Then unplug the firewire cable.
Shut down the repaired (hopefully) machine by holding the power button until it turns of.
Count to ten.
Prepare a celebratory or misery soothing beverage (but keep it in the other room).
Some people like to start in safe mode by holding down shift key while turning on, but I couldn't get it to work on mine...
Turn the computer back on and wait. The boot process will take longer than usual the first time.
If and when you get to login or desktop, go in and run apple disk utility and repair the disk, and repair the permissions.
If it worked, breathe a sigh, do a happy dance. And from now on when mac os says there are updates available, write them down, then go to apples site, download them manually, and install them manually, one at a time from now on, to avoid hassles.
Hope this helps!
Enjoy!

Thanks for the post/tips newfocus, hope it helps somebody!

Firefox not starting after update to 3.6.11 from 3.6.10 on vista platform. XUL error report. Uninstall including removing mozilla items in regedit or system restore does not resolve issue. XUL error still reappears after reinstall ? in English

Problem exists on my HP C0mpaq 6720s , Vista operating system.
System restore, restored to version 3.6.3 instead of 3.6.10 . This did not start either. Previously, I used Revo Uninstaller Pro to remove all Mozilla items, checked regedit and removed all Mozilla folders, then reinstalled 3.6.11 from your website. Mozilla would not start and XUL error stated 1.9.2.10 followed by min 1.9.2.11 and max 1.9.2.11 . This was the same error report that appeared after the automatic update.
So I am at a loss and without Mozilla .

I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing.....

Itunes will not start after updating to most recent version...

I updated itunes this evening to load up ios4 on my iphone. After updating, I rebooted and my screen resolution went from 1280 x 1024 to 800 x 600. Then I got a message saying I needed to restart bonjour, so I restarted it. Then an itunes error message came up saying itunes needed a certain screen resolution setting to function correctly (I had already reset it so I thought no more on it).
I can't start itunes now, every time I try I get that stupid "report to microsoft" message. I re-installed it and it keeps coming up. My head is melted, any help would be GREATLY appreciated.
Thanks!

After updating, I rebooted and my screen resolution went from 1280 x 1024 to 800 x 600. Then I got a message saying I needed to restart bonjour, so I restarted it. Then an itunes error message came up saying itunes needed a certain screen resolution setting to function correctly (I had already reset it so I thought no more on it).
That sounds as if either iTunes or BonJour has been set to run in an old-fashioned display mode. (Lord knows what caused it to happen, though.)
Let's try checking on iTunes first.
Try following the instructions in the following document, with the one change being that when you get to *step 8,* make sure that *no options whatsoever* are checked in the compatibility mode tab.
Will iTunes launch without the error now?
If you're still getting the error, could you let us know which particular Windows OS you're running? (It sounds like you've got XP, but I thought I'd better doublecheck.)

Firefox will not start after updating on Windows XP

I have just updated to the most recent version of firefox, 8.0.1, and it simply does not start when i click the icon.
It logs processes in the task manager, but does not actually launch the program.
The solution already listed on this site is not valid for windows XP, because i have no "application data" folder for firefox under my username.
How can i fix this?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Firefox will not start after updating to version 7.0

Mozilla Firefox automatically updated itself to 7.0. Now, Mozilla will not start on my computer. It shows that it is running in task menu- processes... but not in Applications.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

ITunes does not start after updating or reinstalling

After the latest iTunes update I can not start the app anymore. Even reinstalling does not help. What might be the problem?
When reinstalling it does not want to download Apple Mobile Device. When I want to open the app it says MSVCR80.dll was not found. Error 7 Windows error 126. This happens continuously even if I repair, uninstall and reinstall the app. Is this a common problem at this moment with iTunes?

What happens when you try?
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

IPhone 4s not recognized after update to ios 7.1

My iPhone will no longer sync nor show up in windows explorer (running Windows 7) after installing update 7.1. It may be relevant to note that I had replaced the dock connector prior to updating to 7.1, but the device was still syncing and showing up in the explorer. After updating, it won't show up plugged in and not on WiFi sync either.
I have followed the advice here: http://support.apple.com/kb/ts1538
I have had no success. I have tried multiple cables which I don't believe are the issues since they charge just fine.
Has anyone discovered a solution besides the aforementioned for this?
UPDATE 1: It should also be important to note that the iphone does not show up in device manager AT ALL. Not under Universal Serial Bus controllers nor Imaging devices. There are no "Other Devices" or "Portable Devices" categories listed on my Device Manager.

Can anyone please help? This community is not like it used to be...
The worst part is, I cannot even do a restore since the device does not show in windows at all. I have even tried another computer and it is not showing up. At the very least, can someone tell me if they believe this is iPhone hardware related or iPhone software related?
As I said, the iPhone was syncing just fine after the dock connector replacement. It was only after updating from ios 7.0 to 7.1 that the problem arose.
Please any little bit of feedback is helpful.

Iphone does not activate after update

My Iphone 3 does not activate after last update. What can I do? The system does not let me pass the activation process so it is totally useless now.

There are a number of things:
1. iPhone 3G cannot update to 6.1.2 the highest IOS is 4.2.1.
2. This is a sign that your iPhone was hacked or jailbroken.

Firefox not starting after updating from v24 to v32 on centos 6.5

I have updated my firefox from version 24 to version 32 recently released for Centos 6.5 in the official packs, but after updating now firefox is not at all starting.
Even the first screen where it checks for add-ons dependency is also not coming up, what I can see is just firefox starts and crashes within seconds without showing any screen.

I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing.....

IPhone 6+ not working after updating to iOS 833 OTA

Yo yo yo!!!! Hello! Everyone,
after updating my iPhone 6+ to iOS 833 OTA last night, there was an error when restarting.
I then try to use iTunes but it says can not update and need to be restored.
I was trying to do a full restore from manufacturer setting but also says there was an error in restoring your iPhone.
What should i do now?
Your suggestions are much appreciated. Thank you.

As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere

All games do not start after update to 10.10

Hello,
I updated yesterday to Yosemite and since then all games, that I bought in AppStore (XCOM, Tropico) do not launch. I bought and installed XCOM Bureau after updating to Yosemite - but it doesn't start either. In requirements stays "OSX 10.9 or higher" - so, it should work, but...
Any ideas?
Thanks!

If the version is correct under "About this Mac" it's uneccessary to apply the combo update again. In most cases it doesn't help solving issues like that. I chat several hours with the Apple support and find the problem after digging deep into the KB.
The problem in my case was a corrupt IMAP account. I disable my mail accounts one by one by unchecking "Mail" in the System Preferences settings and try to start Mail. Don't forget to enable the account again before disabling the next one. That point us to the corrupt mail account. What I do next is to delete the corrupt account and create a new one. In my case without data loss because of IMAP.
What I do before (without solving my issue):
Reboot in safe mode and starting Mail
Clear NVRAM
Remove all Mail plugins by deleting the content of ~/Library/Mail/Bundles and /Library/Mail/Bundles
Hope that helps.
Thomas
P.S. Thanks to the guys from Apple support who gives me first class guidance to solve this problem.

Iphone 5s not starting after update to 7.0.6

Similar Messages

Maybe you are looking for