Iphone 5s on iOS 8 stuck in accessibility voice over mode

Not actually a question, but more of a solution!!!
I went to my local Indian restaurant earlier and his phone was stuck in Accessibility mode. Having come home, and fiddling around with Settings > Accessibility > Voice Over, I accidentally turned voice over on, and the same problem persisted with me.
Firstly, a message came on my screen to ask whether or not I wanted to confirm, and if I wanted to cancel - press the home screen button. Having pressed the home screen button, the message stayed on the screen and the voice over kept repeating itself.
I then tried to restart my phone (Home and lock) but then I was just stuck within my lock screen and couldn't input my password.
To fix:
Double tap the home button to get onto your password lock screen.
Click the first digit of your password so the voice over repeats the number. Then double click the number again. - this should register.
Repeat the process until all digits have registered (it may take some perseverance). Your phone should unlock once all digits have registered.
Click settings (until it repeats the word) and then double click. You will notice, trying to scroll down that you are unable to. Turn your phone onto Aeroplane mode (you should have got the gist of how to select things and turn things on/off by now).
Once your phone is in aeroplane, click accessibility and then voice over, and once turned off your phone will work fine.

Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
Hope that helps!

Similar Messages

  • With my iPhone 3GS and iOS 6 no problem a home with my WLAN. But now with my new iPhone 5 and iOS 6 no access to my WLAN at home. What can I do?

    With my old iPhone 3GS and iOS 6 no problem a home with my WLAN. But now with my brand new iPhone 5 and iOS 6 no access to my WLAN at home. What can I do?

    check to see if there is a firmware update for your router. There are also lots of troubleshooting steps you can take in this article
    http://support.apple.com/kb/TS1398

  • Iphone stuck in voice over mode and not accepting passcode

    help, my iphone is stuck in voice over mode and not accepting pass code.

    If you have Siri set to work while the phone is locked, you can activate Siri by pressing and holding the Home button and saying. "Turn off VoiceOver."

  • After updating to the latest iphone 4 software, my triple click to voice over no longer works. I have double and triple checked all settings and it just doesn't work anymore. Advice?

    After updating my iphone 4 last, my triple click to voice over stopped working. I have checked all settings and it just isn't working anymore. Is this an issue with the latest update? Any way to fix this?

    Try resetting your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
    Then, recheck your Settings: Settings>General>Accessibility>Triple-click Home...

  • Safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

    Hi Apple,
    iphone 5s latest updates , safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

    Hi,
    If you are absolutely sure that neither the sound output of the Macbook nor the sound output of VoiceOver are muted then try to reset VoiceOver.
    1. Open VoiceOver Preferences.
    2. From the File menu choose "Reset All VoiceOver Preferences …".
    3. Click "Reset.
    4. Turn VoiceOver Off and On again. (hold command and press F5 twice).
    If you still don't hear anything then it could be that the main sound output of the Macbook got muted somehow. I find that I often hit the mute button on my Apple wireless keyboard without noticing. So just make sure that its not muted and also hit the "Volume Up" a few times. Its so terribly obvious I know but its also very easy to miss. Lots of people do that.

  • Voice over mode does not switch off

    When I go to turn off voice over mode - I double tap on voice over but it turns off only for a second the. Turns back on again

    Hi there Gottliebsen,
    You may also want to try triple clicking the home button to disable VoiceOver. Take a look at the article below for more information. 
    iOS: Configuring accessibility features
    -Griff W. 

  • How do I enter passcode in voice over mode?

    Hi, Don't know I did it, but I activated voice over mode on Ipad 1. Now can;t enter passcode. Any help appreciated.

    Touch or tap the field that you want to use/select and it should get a box around it ; then double-tap that field to activate/type it. Once you've entered your password you can do the same (i.e. touch to select, double-tap to activate) to gradually get into  Settings > General > Accessibility > VoiceOver and turn it off.

  • IPod nano and Voice Over mode problems

    The iPod Nano keeps going into Voice Over mode despite it being in the "Off" position under settings.  Am I doing something to override the settings and how can I get it to stop?

    you may have enable voice over set in the iTunes settings
    to turn it off do the following
    -connect ipod to computer
    -when ipod shows up in the left column of iTunes under "devices" click on the ipod name
    -in the summary page, scroll down to the bottom of the page until you get to a section that says "options"
    -under options deselect the checkbox next to "enable voice over"
    -click apply and that should turn it off
    hope this helps:)

  • PHONE WAS IN VOICE OVER MODE AND I LOCKED IT AND NOW I CANT UNLOCK THE PHONE.

    i put PHONE IN VOICE OVER MODE AND I LOCKED IT AND NOW I CANT UNLOCK THE PHONE.

    i just tried holding the home button and lock button until the screen went black then turned on again, its now back to normal.

  • HT203175 my device launches into the Voice Over mode and I loose touch control how do I stop or change that from happening?

    My I-Touch launches into the Voice Over operation and I lose touch control, how do I get out of this mode and back to normal operation? What is causeing this to happen?

    @wetdro
    If your device has been jailbroken during the warranty, Apple will not service it.
    Maybe you missed that in this article:
    Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
    Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
    copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

  • I have the I pad 3. I have noticed that when in the voice over mode that I cannot Hear any clicks or boundary sounds. The VoiceOver works. Is there a setting that I can change to put these sounds back?

    I don't hear the cursor sounds and boundary sounds while using voice over. Is there a way to fix this in settings? I have I Pad 3.

    you need camera raw 6.7 or better.
    i don't know what version of ps you have so i can't say if it can be updated to use that, but update anyway.
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
    if you can't update your cr sufficiently, use the dng converter. DNG Converters:
    Win
    Mac

  • Voice Control Accessibility Voice Over

    What a USELESS feature!!!
    If you turn it on it is SO hard to turn it off! It took some Googling to findout how to disable it. And much swearing.
    If this is supposed to help visually impaired uses then God help them.
    Nice idea - awful implementation.

    MattComputerGuy wrote:
    If you turn it on it is SO hard to turn it off! It took some Googling to findout how to disable it. And much swearing.
    Reading the iPhone iOS4 User Guide would also help.

  • HT201412 iPhone 5 with iOS 7.1 randomly enters recovery mode

    Since two weeks ago my phone started behaving badly just before the new update was released.
    While locked it happens that it enters recovery mode (iTunes says that, while another software I downloaed to try to force it out says it is on "soft DFU mode") and won't exit it for hours: indeed after a bunch of time I'm able to turn it back to functioning by pressing the Home Button and the Power Button in random sequences (when I mean random, I mean random: it doesn't just wake up following either the 'exit recovery mode' or 'exit dfu mode').
    I restored it, yet the same still happens. It is now, basically, an unpredictable piece of junk metal.
    Any ideas?
    Notes: it is not jailbroken nor it has ever been, the software is up to date.

    Try restoring as a NEW device (not from a backup) to see if it works properly.

  • My Nano suddenly went into voice over mode and I cannot make it stop.

    It started reading menus and options when I turned it on recently; I didn't go near any setup screens. It talks even after I've selected and started to listen to a pod cast. It will start over again in the middle of the pod cast for no apparent reason. I've already tried restoring factor settings.

    #1:Open Properties
    #2: Click compatibility
    #3: Click change settings for all users
    #4: Under settings click all of the boxes except the first one.
    That's how I got it to work

  • How will you turn off an IPhone 4S voice over with the latest IOS

    How will you turn off Voice Over in Iphone 4S? i tried turning it off through settings/accessability/voice over but when i turned it off it always go back to ON. It is very depressing to go over with this feature. Thanks.

    on your phone go to settings - icloud - find my iphone - off

Maybe you are looking for

  • Reg: View column datatype

    Hi Team, While creating the views, column automatically converted into varchar2(81) data type from number datatype. but stage1 table has legacy_trx_number is number data type and statg2 table has header_num is number data type. Just i added the highl

  • Video Player for Ipod Classic

    Does anyone know if there are any portable video players compatible with the new Ipod Classics? I got a good deal on a Sonic Impact V55 player, but when I received it I soon found out that my new 80gb classic would not work on it. Any help would be a

  • How to Increase the Length of Condition table in OV20

    While creating a condition table in T.code OV20 if fields length is more that 50 bytes table is not getting generated.it gives error as Too Many Fields Selected(More than 50 Bytes). Actually i need to create a tabel with Basic Material(WRKST) which h

  • Persistence Layer.

    Hi All, Currently, the sql query is inside the Business Object in my program. I would like to separate out the query (or persistence part) to a different layer. I need some help in the best way to design this. I like to have a 5 Tier Arch. User Inter

  • HP Mini 1000 BIOS Password Help

    BIOS password help needed for HP Mini 1000. My error code is cnu9318wgr.