IPhone 5S playback won't pause when connected to car USB.

I drive a 2009 Civic Hybrid, and when I connect my iPhone 5S to the USB jack, music plays automatically. When I try to pause it, it stops momentarily and resumes. It also overrides voice command. Any idea why this might be happening or how to stop it?

Same happens to me with a Hyundai Tucson under 8.1.x ; whenever I plug the phone it starts playing, and can't pause. Siri also won't work since as soon as it pauses the music, it resumes playback and interrupts Siri.
However at some point it did fix itself; it was something like I connected the phone while in the middle of a call after having done a sync, and then turned the car on and it did not initiate playback (since I was in the middle of a speakerphone call), and from then on it worked fine, did not do the automatic playback anymore. Everything worked as it should for weeks, until I upgraded to 8.1.2 and then it broke again. So it's some kind of setting or "cookie" that'd be stored either in the phone or in the car. Haven't been able to replicate the "fix" again.

Similar Messages

IPhone 4: Since iOS5 Bluetooth issues when connected to car hands free and audio system

Hi @ all,
this discussion is either a kind of "warning" for those who hadn't yet updated to iOS 5 and a beg to Apple for fixing the issue:
Obviously the iOS 5 does have some problems with VW and Ford (germany) modells equipped with handsfree and audio systems (googling a little bit resulted in many, many complaints in german discussion forums about it). Unfortunatelly I'm facing these problems now too:
Issue 1:
When the iPhone is connected to the audio-system of the car via Bluetooth, the Audio Slider on the iPhone doesn't work any longer. The only thing that it is capable to do is, if you slide it completely to the left, which results in switching the audio completely off.
Issues 2 (much more annoying):
When the iPhone is connected to the handsfree system of the car, the ringtone volume is obviously set to "off" or at least "extreme low". This doesn't harm when using the phone with the handsfree since the ringtone still is coming from the cars loudspeakers. But as soon as you leave the car and the bluetooth connection is disconnected, the ringtone audio on the iPhone is STILL set to "off". Means: Each time, when you leave your car, you have to increase the ringtone volume manually.
Issue 1 is more a "not nice" or a "OK, it's first release" bug. But issue 2 would have been a reason for me to wait for upgrading to iOS 5, since I'm using my iPhone as a business tool and am quite frequent on travel.
To verify that I hadn't had a bug when upgrading for the first time my iPhone, I completely set my phone back to factory default, put it in maintenance mode and re-flashed it completely anew using iTunes. I only performed minimal setup to make sure, nothing else could cause this. The issue still remained, therefore it was clear to me, it is iOS 5. I never had any of these issues with iOS 3 und 4. A probable "workaround" would be a downgrade, but this doesn't work, as known, either.
@ Apple Engineering: Please fix this as soon as possible!
Cheers,
Frank

Good question... I haven't found a "reliable" way of sending constructive(!) Feedback to those at Apple who really care. I remember the beginning days of Mac OS X, when the reply-link was even on top of the dock.
Maybe I'm just not aware of working feedback channels, I only can hope that some of Apple's people with "influence" read statements like this...
Cheers,
Frank

My "4" won't turn on, won't charge when connected to charger or computer. I've tried to reboot and it still doesn't turn on, its never been dropped or had water damage. My warranty ran out on feb. 23, help!

My "4" won't turn on. It won't charge when connected to a charger or to the computer. It's never been dropped, or had any water damage. It looks like its brand new! The warranty ran on on Feb 23rd, help!!!

Hello Breejumpp,
Try Reset ( No Data will be lost )
Press and Hold the On/Off switch (On top your iPhone) and the Home Button (Button at the bottom of your iPhone screen). Hold both the keys simultaneously for atleast 10 to 15 seconds and you should see an Apple Logo coming up on your screen, once you see the Apple logo you can then release oth On/Off switch and Home button and wait for your iPhone's Home screen.

IPad 1,1 won't respond when connected to any computer, except 1

[IPad 1,1 won't respond when connected to any computer, except 1]
Symptoms:
-iPad shows no sign of recognition of being plugged into computers
-screen does not light up, if sleeping
-ipad will not turn on if turned off
-ipad does NOT say "not charging"
-ipad does NOT have lightning bolt in battery
-does not sync
-computer does not see it
-computer does not see in itunes
-windows device manerger does not see it
-If VM IS turned in mac osx the "connect to mac or windows" dialog box DOESNT appear
-iPad WILL charge IF plugged into wall using ANY cable.
-iPad will connect and act completely normal with PCG-R505DL
stats:
iPad1,1 -(warranty expired over a year ago)
-works with:
-PCG-R505DL(broken?)(old)(638MB RAM)(1GHz processor)(runs windows 7)(designed for windows xp)
-doesnt work with:
-MacbookPro9,2(8GB RAM)(2.9GHz i7 Processor)(turbo boost to 3.7GHz)(osx 10.9, windows 7 Bootcamp)
-IBM Thinkpad(1.6GHz Pentium M Processor)(single core)(1GB Ram)(runs windows 7)(designed for windows xp)
i have:
-imported the HDD from PCG-R505DL to IBM Thinkpad and installed the required drivers(didnt work)so i moved it back
-installed new copies of windows to bootcamp and other two computers(same results)
-updated all computers itunes, checked firewall, no virus software installed
-used 5 USB cables, all from apple, all work with other iDevices
-tried to restore(sucessfull on working computer), no effect on the others
-tried it on my friends new macbookpro (no effect)
-neither my iPod1,1, my iPod3,1, nor my dads iPad2,1 have any issueswith this(or other) problems
(the "1" computer menchioned in the description)(PCG-R505DL)
-is exibiting signs if imnent failure, ex. hdd cable going bad, ethernet not working, wifi card going out, CD Drive Useless, freezing, rebot doesnt work, crashing (none of these issues are present if HDD is plugged into other computer, so not a virus)
i have been having problems with this for about a year now, and ANY help is Welcome

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

I dropped my iphone 3gs now it goes on when connected with a charger but battery show 0% battery. as soon as i disconnect the charger the phone goes off....

I dropped my iphone 3gs now it goes on when connected with a charger but battery show 0% battery. as soon as i disconnect the charger the phone goes off....

Your the one saying it won't work properly, so yes it is broken.

My iPhone 3GS no longer opens iTunes when connected.

My iPhone 3GS no longer opens iTunes when connected. Not since recent big update. It is ticked to open on connection.
Any pointers to a solution.
TIA
Ritch

I have the exact same problem. And my wife's iphone 5 also has the same problem. Anyone knows the resolution? It worked fine before we restored both phones. Thanks.

HT4623 ipad stuck with a connect to itunes sign but it won't update when connected because it says content is full

ipad stuck with a connect to itunes sign but it won't update when connected because it says content is full

You are in Recovery Mode
http://support.apple.com/kb/ht4097

HT1363 hi, i use an old but great black photo/video ipod. Suddendly it won't recharge, when connected it emits several clicks and an ipod icon appears together with the apple support email address. I have tried to restore and reset but it won't work. Any

hi i use an old black 60G photo/video ipod. Suddenly it won't recharge, when connected to the pc it emits several cicks in serires and then it shows at intervals a low battery signs and another sign, a sad faced ipod icon with the apple support email address. Any clues and to how I can rescue it? Thank you very much. Alf1962

I am having essentialy the same problem, but my iPod came from a PC and is now on a PC. The person who gave me the iPod didn't give me the wall adapter piece, so I bought a "Griffin" brand that was said to be compatible with this model. When I first plugged it into the wall, the Apple appeared with a bar underneath as though it was loading the new software. When the bar got to the end, the "plug into the wall" icon reappeared, but when I plug it in to the wall now, that icon is the only thing that shows, even after resetting and trying to run diagnostics.
When I doc the iPod on a charger I have or plug the USB into my computer and "reset" it, a battery with a charge icon appears, but there is no "motion" in the icon so it doesn't appear to be charging. The screen eventually goes back to the apple then to the "plug it into the wall" icon. HELP!!! Is is possible the wall adapters isn't the right one? Should I be charging through a firewire cable instead (which I also don't have...)?
Message was edited by: shenards
Message was edited by: shenards

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My iphone won't synch when connected

My iPhone will not synch when connected to my iMac. It just started happening. It an iPhone 5, all apps and software are up to date.
Thanks
jim

I a;ready take off the acces of the computer and reput it

IPhone 4S only powers up, works, when connected to wall power

Brand new iPhone 4S, arrived two days ago on the model's launch day. Few glitches, expected w/ new phone, not a big deal, worked through them, initially did restore-type installation to transfer all info from old AT&T iPhone 3GS, still w/ AT&T. It was working fine.
Then, connected to wall charger last night. This morning, before disconnected from wall charger, charge showed 87%, then disconnected and screen went black.
Phone did not, and does not, respond when unconnected.
Connected iPhone to MacBook Pro, result is same as when unconnected, no response.
However, when iPhone connects to wallpower, it works fine. Powers up, all functions seem to be normal, but noted that charge now shows only 84% and it's not going up, as it should.
I have been studying these boards today before typing this post. Have tried the reset procedure (hold down sleep/wake + home buttons simultaneously for 30+ seconds) when iPhone is unconnected and when iPhone is connected to computer, still unresponsive. Also tried reset procedure when connected to wall power, it eventually goes into reset mode and it eventually got to the point that it said connect to iTunes, but when I disconnect from wall power and connect to computer, it is again unresponsive. After doing that, connected to wall power, and it powers up normally.
With iTunes open and running, the iPhone does not appear therein when connected. Left iPhone connected to computer all morning, no changes in nonresponsiveness. Before last night, this was not a problem.
Before I even starting using this iPhone, I'd put it in a nice, new OtterBox case. It has not been dropped or mishandled or gotten wet.
My conclusion is that there's a hardware problem that I cannot fix, and even if I had a clue what to do, I'd probably void the warranty.
Looking for suggestions as to what to do short of calling AppleCare. Any help will be most appreciated.

Called AppleCare this morning, confirmed that this is a hardware problem. Getting replacement.

Annoying incessent beeps in videos / won't charge when connected to CPU

First of all my battery couldnt hold a charge within 2 months of buying my 5G Ipod, so I sent it in and got a new one. The new one has a couple of problems, one of which the old one had as well.
The one thing both iPods have not been able to do is charge when connected to the computer. They can connect fine, but if my battery is dead or low, it won't connect and I have to recharge it on my charger before connecting it to the comp. My old 4thG (Which died right after warantee expired) was able to charge on my comp.
However my major issue is that my video's have loud and annoying beeping sounds throughout when I play them. I've done the 5 R's(many times), it does it for downloaded files as well as some official apple ones that someone suggested. It does not beep when TV-Out is selected but does start beeping as soon as I try to view it from the player. It does it to ALL my videos, ones that worked fine for my previous 5G. Audio files work fine.
iPods have given me nothing but trouble as this is my 3rd one.

The USB mouse and printer do not draw any current from the USB port, so there's no info there. As you've stated, since your USB HDD uses an external power, that's not helpful either. I'm out of suggestions except you can see if someone else has a USB-iPod connector to try on your MacBook. BTW, if your IPT has a volume control on the left side, it's a G2.

My Iphone 4 will not receive email when connected to wifi,works fine on 3G

My Iphone will not receive emails when connected to wifi,works perfect on 3G

Arrr I have this prob to and this has been driving me made i thought it was a network area have changed providers brought different sim cards to get new numbers deleted everything off my iphone to reset it and still no luck..
After reading your comment it has actually been since I have updated my phone.
I have to turn off my phone everyday as I fly and i need to recieve messages when my phone is turned on if this isnt resolved quickly I am going to have to switch from Apple but I dont want to...
Apple can you please advise if this is going to be sorted asap? Alot of people dont turn there phones off all of the time so wont notice however for those of us that do and have to this is a really HUGE ERROR that needs your QUICKEST ATTENTION !
Thanks ;-D

IPod won't pause when external power removed

I use my IPod Nano to listen to audio books in my car and I have a 12 VDC charger connected to it. The 12 VDC is turned off when the car is shutoff. Older generation IPod would pause when the external power was shutoff but the new IPod doesn't. Any body know for a solution to this? I keep losing my place in the audio book which is a huge pain. Thanks.

I found a page at http://www.allpinouts.org/index.php/Apple_iPod,_iPad_and_iPhone_dock and it has a section that states:
1MOhm - Belkin auto adaptor, iPod shuts down automatically when power disconnected Connecting pin 21 to ground with a 1MOhm resistor does stop the ipod when power (i.e. Firewire-12V) is cut. Looks to be that when this pin is grounded it closes a switch so that on loss of power the Ipod shuts off. Dock has the same Resistor.
This connects to pin 21. So it appears that there may be Belkin Auto Adapters available for the new 30 pin dock connector that will allow to pause the IPod when Power is removed.

Ipad apps won't load when connected via Comcast wifi

We are trying out Comcast for 30 days. We already had Uverse so right now we have both. When connect via Uverse everything works fine on my iPad as always has. Internet access, apps load etc. when I switch over to the Comcast wifi, I can access internet just fine. Sped test are all hella fast. But for some reason a few of my apps/games won't load. for example I have a price is right bingo game. It will not load when connected via Comcast. I get an error that say it won't connect and to check my internet access. and my internet access will be working fine. If I switch back over to uverse the game will load. There are a couple other apps doing the same thing. Anyone seen this before? I have an iPad Air 2 on iOS 8.1.2

Hello, SockMonkeyGirl.
Thank you for visiting Apple Support Communities.
I understand that you are unable to use your internet based applications when connected to the Comcast network only. I would recommend making sure that this Comcast network settings are updated to the recommend as outlined below. Also make sure that all firewalls are disabled as well.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/en-us/HT202068
Cheers,
Jason H.

IPhone 5S playback won't pause when connected to car USB.

Similar Messages

Maybe you are looking for