IPhone 5s started randomly restarting with iOS 8.1.1

I have had my iPhone 5s since it came out last year and have had no issues. Was among the first adopters of iOS 8 and each upgrade and still never had an issue until downloading iOS 8.1.1. Now every 20-30 minutes the screen goes to the apple logo and it restarts. Maybe takes it 10-15 seconds to be back up and running again. It will do it when I am running programs or if it is just sitting on my desk or on a charger. It has happened while facetiming and ended the call, but one time it happened on a normal call and when it came back on the person was still talking on the line. Weird. How do I get it to calm down?

Howdy Mark,
Welcome to Apple Support Communities. 
The article linked below provides troubleshooting suggestions that’ll resolve issues like the one you’ve described, where your iPhone 5S is unexpectedly restarting.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Cheers,
-Jason 

Similar Messages

  • My iphone 4S Black 16 GB with IOS 7.0.4 turns off randomly in low battery less than 15% and also when I am taking pictures from my front camera in low battery of 30%. This is happening very often. Can someone help here with advise?

    My iphone 4S Black 16 GB with IOS 7.0.4 turns off randomly in low battery less than 15% and also when I am taking pictures from my front camera in low battery of 30%. This is happening very often. Can someone help here with advise? The phone is slightly more than 2 years bought from singapore I live in India

    Either your battery is failing or your battery gauge needs to be recalibrated. Start by recalibrating:
    When it shuts off charge for just a minute or two, then restart (hold HOME and SLEEP until an Apple logo appears). Deliberately run the battery down until the phone shuts off at 1%. If it shuts off above 1% repeat the above until you get to 1%. Then charge for 4 hours with the wall charger without using the phone. This process will recalibrate the battery gauge.
    To prevent this from happening again about once a month run the battery all the way down to 1%, then continue until the phone shuts off. Apple recommends this in their battery help article, but they don't say why you should do it. The have some hokum about "keeping the electrons moving." Honestly! The iPad battery tip gives the correct reason.
    If this does not resolve the problem you most likely need a new battery. If you are near an Apple store take the phone in and they can test the battery for you.

  • IMac 10.6.8 will not recognize iPhone v.4.12.09 with iOS 7.1.1

    I cannot get photos from my iPhone version 4.12.09 with iOS 7.1.1 to appear on the desktop of my iMac running 10.6.8.
    It will not open iPhoto nor will preview recognize the iPhone as being connected. No way to get newly taken photos to iPhoto.

    Have you just tried opening iPhoto manually to see if your iPhone will show up that way?
    Have you tried shutting down your Mac and doing a PRAM reset?
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone.

  • Why would wifes iPhone 5 start randome calls at 3:00 am?

    Why would my wifes iPhone 5 start randome calls at 3:00 am? My wifes phone called my mother, me & one oher clients. When it called i hung it up went th go check on her & and the grandbaby in the other room. They were both out like a light. Looked at her phone and it was moving and selected another number and started to call it. I hung it up and turned it off. Funny thing is her phone was passcode protected.
    Any clues on this?

    Make an appointment at an Apple Store if there is one nearby.
    If not, try restoring the iPhone with iTunes as a new iPhone or not from the backup.

  • How do I backup voice memos from iPhone 4 to my Macbook with iOS 6.0?

    How do I backup voice memos from my iPhone 4 to my MacBook, with iOS 6?
    I have synchronised them a hundred times but iTunes just doesn't backup my voice memos. And I haven't seen a playlist called "Voice Memos" on the left sidebar either...

    Look for Voice Memos under Genres in iTunes.
    With the phone connected, click on its name on the left. Then click on the Music tab on the right. Is "Include voice memos" checked?

  • IPhone 4s says "Invalid SIM" with IOS 7.1

    I have an unlocked Iphone 4s for T-mobile which allowed me to use the iphone on a metropcs plan with a metro SIM card. I switched to metro on Sunday, today being Tuesday, and it worked perfectly, perfect 4g, perfect T-mobile carrier. Yesterday, Monday, I took a trip to publix and my phone read "No service" and I figured it was an itch and I had no service in publix. But this morning, Tuesday, it still read "no service" even at school, which worked fine on Monday. So I restarted my iphone and then it read "Invalid SIM" and I looked up how to fix that: restarted it by taking out sim and putting it back in, didn't work. Airplane mode on/off, didn't work. Then I read to update completely, to IOS 7.1, which I did and it still did not work. I cleaned my SIM card, didn't work. Reset all settings, didn't work. I read all over that the SIM card may be damaged due to the updates but my sim card wasn't working even before I updated. I'm currently about to restore my phone in hopes of fixing it sigh, but tomorrow, if still not working, I will take it to metro and request a new SIM. Any other ideas guys :---(

    Hi,
    I also noticed a SIM related problem iPhone 5 after upgrading to IOS 7.1.
    It does not happen consistently, but I noticed that in certain times, iPhone "reception signal level" turns into "NO SIM" or "No SIGNAL" although SIM is perfectly fine and singal strength is high.
    I have no idea why it happens, but it started only yesterday after I upgraded to IOS 7.0.1.
    Apple engineers, please check this.
    Thanks,
    Daniel

  • IPad mini with retina frequent random restart with 802 update

    I Have updated my iPad mini2 to iOS 802, since then it started randomly with blue screen. it restarts 1-2 times every hour During use. It is very much
    frustrating to use.
    any solution?

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • My iphone 4s doesn't work with iOs 8. Battery drains very fast!!

    After installing iOS 8  I'm starting to hate my smartphone. With iOS 7  the battery lasted until the evening while now barely reaches mid-afternoon with the same use of the phone and being careful not to leave apps in the background. I'm afraid to use the smartphone to save battery power ... frustrating!!
    I ask Apple to release as soon as possible an upgrade to fix all the problems with iphone 4s or enable us to return to iOS 7.

    Hi Massimo1973,
    If you are having battery life issues with your iPhone, you may want to read over the tips in this article - 
    Apple - Batteries - Maximizing Performance
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • If I buy a new iPhone 5, will it come with iOS 6?

    Hi, I'm from Brazil and we don't have any Apple Stores here yet, just Premium Resellers and the Carrier Stores.
    So, in Apple's reseller in my town, there still are some iPhone 5 boxes lying between the iPhone 4S, 5c and 5s's boxes, as well some old iPhone 4 ones. Leaving aside the comments like "wow, iPhone 4 and 5 souldn't be found anymore" (I know that), do you think if I get one, it will still come with iOS 6?
    I think so, becuase officially there aren't iPhone 5 in sale anymore, so it wouldn't make sense for Apple to ship them with iOS 7, because they stopped manufactoring the 5 before the iOS 7 and the new iPhones that ship with it, as well as the 4S 8GB, were introduced.
    I'm asking this because I got a 5s and I'm deeply disapponted with iOS 7, and for me it ruins all the great features that only the 5s has to offer, and I'm willing to go back to the last iPhone that could run iOS 6.
    PS: the Home Screen printed in the iPhone 5 box is from iOS 6, and we know Apple updated the printing on the 4s to iOS 7.
    Thank you all in advance

    Does the Premium Reseller offer a return policy? If you purchased the phone in an Apple store you could return it within 14 days for a refund. If the store you're dealing with offer this you could buy the phone and go through the setup process. You'll soon learn what version of the iOS is installed.
    Given that, i would add that it is not wise to continue running iOS 6 when there are no own security flaws. iOS 7 solves those problems and adds the activation lock to prevent thieves from activating your phone should it be stolen or you lose it somehow.

  • IPhone 5 not syncing music with iOS 7.

    ok. so i have 12000 songs on my itunes. most are CD burns or mp3/m4a files and equals about 50GB of music. they have fully synced and worked on my iphone 5 with iOS 6 and my ipod classic 120GB in the past without fail. however, since upgrading to itunes 11.1 and iOS 7, it will sync all songs but gets stuck saying "waiting for items to be copied." i has done this over night (ie: begun sync process at 8pm. all songs synced by 11pm. waiting for items to be copied still displayed at 7 am following morning.) i then clicked cancel sync as i had to go to work. in my music library on the phone it has about 75% of the songs there. the rest are greyed out.
    after this i got home and plugged the phone into itunes and it showed the 50GB of music as other (meaning corrupted files on the phone) so i removed all music from itunes library then put it all back in plus rwstored the iphone and did a resync. same issue. gets stuck on either "waiting for items to be copied" or "waiting for changes to be applied." checked next morning and still stuck on that message.
    any suggestions on how to fix?

    Yes. I seem to have fixed it, but not really. I erased all music from phone, and then manually managed a resynced eveything I wanted back on there. Interstingly, it didn't work the first two time and said (waiting to make changes) so I was freaking out. But the third time was the ticket and now we are good. Unfortunately, there is a bug, and until there is a real fix, my music that I have in itunes on my computer is not easy to get to the phone. It seems that many people have had the exact same issue since the updates. Hopefully it will fix itself in the next update. Thanks for help though.

  • Random restarts with Eclipse SLI board

    This is a copy from my post on the Vista forums havent gotten much help there.
    Describe the problem in detail!
    I just built a new system on December 22nd 2008. I do Tier 2 and 3 Helpdesk work so I can work my way around a system. I put the machine together installed Vista did all the updates got all the newest drivers. Basically since I have built the Machine it will just randomly restart. It will not display a BSOD, I have auto restart turned off, and it does not create an event in the event viewer. It is almost like someone touched the reset button.
    When did the problem start?
    December 22nd 2008 the day I built the machine.
    What have you tried to fix it?
    Tried several different BIOS setups. I have upgraed the bios, did all the windows updates, got all the newest drivers for video, audio, lan etc etc. Removed MSI Live Monitor, disabled green power in Bios, and removed overclocking center. Went through event viewer and corrected three of the four errors that was showing up. One error is the Kerebos one and I am not worried about that one.  I have just run both Memtest86 and Memtest86+ and both of them stop responding about half way through the test.
    What is the error message (of any)?
    I have Vista set to not auto restart so I should see a BSOD but I get no message. I have had 4 restarts just today and none of them created a new MEMORY.DMP file or any type of event in the viewer.
    I do get warnings about something called FLASH.SYS but I cannot seem to track down what this is.
    What was the last thing you did before the problem started?
    Built the machine.
    What are your system specs?
    Vista 64
    MSI Eclipse SLI X58
    12 Gigs Crucial ram matched to the MoBo using the crucial matching system on the crucial website. The MoBo supports up to 24 and I am using Vista 64bit.
    Antec P190 Case (Dual power supplies for a total of 1.2 KW of power)
    Intel Core I7 2.66
    Creative Extreme Gamer Edition PCI E sound card
    Mcaffee
    BFG 260 GTX
    Coolmaster V8 cooler (CPU under stress runs about 70f well below the max of 208f)
    Do you have a screenshot?
    Nope
    My next step is to take out 6 gigs of RAM and see if the issue goes away.
    Any suggestions?

    Quote
    12 Gigs Crucial ram matched to the MoBo using the crucial matching system on the crucial website.
    Please provide a link to the Crucial Product site for your memory modules and make a screenshot of the CPU-Z "SPD" view.
    Quote
    My next step is to take out 6 gigs of RAM and see if the issue goes away.
    Test one memory module only and see what happens.  If things seem fine, add one more module and test again (and so on).

  • My iphone 4s gets too hot with ios 6

    Hi Everyone. Just joined the community. I noticed since I upgraded to ios 6 on my iphone 4s it has been getting too hot when in using it. i noticed it would get hot when using maps and playing games. it would not get this hot too quiclky on ios 5.1.1. I also read that some iphone 5 users have the same problem as well as 4s users with ios 6. Can anyone give me some feedback and info. on this ? Hopefully there will be a fix for this soon.

    Mines never did that until recently. It depends on your usage and apps.
    It's basically normal to get hot, especially charging. Now if you talking about oven hot then you have a
    Problem. All my friends iphone 4s does it, so it's normal. Streaming videos while multi tasking can cause it also.

  • Will the iPhone 4S feature Panorama mode with iOS 6?

    I have an iPhone 4S, and I use the camera very often.
    The new Panorama mode in the iPhone 5 and 5th-generation iPod touch really interests me, and I really want to use it on my 4S.
    The iPhone 4S does not lack in hardware that's needed for it to work properly, when it has the same chip, and close to the same camera found in the 5th-generation iPod touch.
    Will the Panorama mode feature be available for the iPhone 4S with iOS 6?

    Yes, you will have Panorama on your iPhone 4S with iOS 6.

  • Iphone 4 s syncing problem with ios 7 & itune 11

    I have updated my iphone 4s with ios 7 - also i have updated my itune with version 11 - for some reason i can not sync my music from my itune to iphone. It freeze at waiting for changes to be applied and then nothing -

    bes2dt10
            Nov 22, 2013 8:59 AM    
    The easy and quick way to fix this is to connect your iphone to itune...
    1.Go into your iphone (Top right of itune).
    2.You'll see 3 different topics in bold - Iphone, backups and options.
    3.Go to options and uncheck all the boxes (make sure you remeber what was been check before you uncheck anything in the boxes).
    4.Check only - manually manage music and video and press apply (bottom right of itune).
    5.Wait for it to finish the process (it should delete everything).
    6.Then it is up to you.... either go by each tap and sync each one (info, apps, tones, music, movies, TVshows, podcast and photos) or uncheck manually manage music and check whatever it used to be before you unchecked everything.
    7.All done, Everything should be working perfectly.
    Please shared to other that needed help
    Appologiez to my behalf the language, Not really good at English grammas LOL

  • MacPro Randomly Restarts with Black Screen, Kernal Panic

    Please help...
    I have a Mac Pro 4,1 Early 2009 running OS10.9.5.    In Feb'14 I installed a new graphics card, NVIDIA Quadro 4000 for Mac. Lately, though, for about the past two months, my computer has suddenly restarted in the middle of a task. It restarts with a black screen. I'd then have to hard-restart my computer to bring my monitor back to life. When the Mac finishes starting up, I am greeted with what I understand to be a Kernal Panic report. This problem has been occurring more frequently now, which is prompting this post.
    Typically, I've noticed that the restarting/crash would occur when I am doing video related things that seem to tax the system. So much so that my first thought was that my system was overheating? Yesterday, I observed that the crash occurred when playing video in a web browser, and it happened each time I tried transferring 30GB from a USB source to an external harddrive.
    I performed a Hardware Test, short and extended, and everything came back as normal. I also uninstalled CUDA Drivers, but to no avail.
    Then, I decided to remove the Quadro 4000 video card and put back in the original video card, a NVIDIA GeForce GT 120.  My system has since been working well, as I was able to successfully transfer the 30GB that previously caused the system to crash.
    So my question: Is my NVIDIA Quadro 4000 video card dead? Or, are the Kernal Panics a result of bad software, meaning I should reinstall the OS? What should I do next, as I need the Quadro card for it's cuda power in video editing?
    Thanks for the help!
    Here are some Kernal Panic reports from yesterday...
    Thu Apr 16 18:55:29 2015
    panic(cpu 0 caller 0xffffff7f8bebbb49): NVRM[0/5:0:0]: Read Error 0x0061002c: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8c000000 0xffffff8189ad4000 0x0c0e80a3, D0, P2/3
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8188c73be0 : 0xffffff800b423139
    0xffffff8188c73c60 : 0xffffff7f8bebbb49
    0xffffff8188c73d20 : 0xffffff7f8bf85e4e
    0xffffff8188c73d60 : 0xffffff7f8c1479b8
    0xffffff8188c73d80 : 0xffffff7f8bf5a263
    0xffffff8188c73da0 : 0xffffff7f8bffcbbf
    0xffffff8188c73e20 : 0xffffff7f8bea43e2
    0xffffff8188c73ee0 : 0xffffff7f8be71a45
    0xffffff8188c73f20 : 0xffffff800b44a57a
    0xffffff8188c73fb0 : 0xffffff800b4d7c67
          Kernel Extensions in backtrace:
             com.apple.nvidia.driver.NVDAResman(8.2.6)[E3CE9F72-FB2A-33B3-BD1B-F34B86518954] @0xffffff7f8be6b000->0xffffff7f8c0defff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8bac1000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f8be55000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8be12000
                dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f8be65000
             com.apple.nvidia.driver.NVDAGF100Hal(8.2.6)[A70A96A4-52F6-3303-AF6D-FE537BCFDAC 0]@0xffffff7f8c0ea000->0xffffff7f8c2b7fff
                dependency: com.apple.nvidia.driver.NVDAResman(8.2.6)[E3CE9F72-FB2A-33B3-BD1B-F34B86518954] @0xffffff7f8be6b000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8bac1000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13F1077
    Kernel version:
    Darwin Kernel
    And.....
    Thu Apr 16 17:40:59 2015
    panic(cpu 0 caller 0xffffff7f85abbbb9): NVRM[0/5:0:0]: Read Error 0x0061002c: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8c000000 0xffffff818371a000 0x0c0e80a3, D0, P2/3
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81828f3be0 : 0xffffff8005023139
    0xffffff81828f3c60 : 0xffffff7f85abbbb9
    0xffffff81828f3d20 : 0xffffff7f85b85ebe
    0xffffff81828f3d60 : 0xffffff7f85d479b8
    0xffffff81828f3d80 : 0xffffff7f85b5a2d3
    0xffffff81828f3da0 : 0xffffff7f85bfcc2f
    0xffffff81828f3e20 : 0xffffff7f85aa4452
    0xffffff81828f3ee0 : 0xffffff7f85a71ab5
    0xffffff81828f3f20 : 0xffffff800504a57a
    0xffffff81828f3fb0 : 0xffffff80050d7c67
          Kernel Extensions in backtrace:
             com.apple.nvidia.driver.NVDAResman(8.2.6)[272B6397-FEDB-32FC-9035-BDD749284455] @0xffffff7f85a6b000->0xffffff7f85cdefff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f856c1000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f85a55000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f85a12000
                dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f85a65000
             com.apple.nvidia.driver.NVDAGF100Hal(8.2.6)[A70A96A4-52F6-3303-AF6D-FE537BCFDAC 0]@0xffffff7f85cea000->0xffffff7f85eb7fff
                dependency: com.apple.nvidia.driver.NVDAResman(8.2.6)[272B6397-FEDB-32FC-9035-BDD749284455] @0xffffff7f85a6b000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f856c1000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13F1066
    Kernel version:
    Darwin Kernel Version 13.4.0: Wed Dec 17 19:05:52 PST 2014; root:xnu-2422.115.10~1/RELEASE_X86_64
    Kernel UUID: 45486BF2-BDDE-34CB-8C71-606FF3FE181B
    Kernel slide:     0x0000000004e00000
    Kernel text base: 0xffffff8005000000
    System model name: MacPro4,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 1606578028649
    last loaded kext at 256099292334: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f87340000, size 65536)
    last unloaded kext at 316601108169: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f87340000, size 57344)
    loaded kexts:

    panic(cpu 0 caller 0xffffff7f8bebbb49): NVRM[0/5:0:0]: Read Error
    Kernel Extensions in backtrace:
             com.apple.nvidia.driver.NVDAResman(8.2.6)
                dependency: com.apple.iokit.IOPCIFamily(2.9)
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)
                dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)
             com.apple.nvidia.driver.NVDAGF100Hal(8.2.6)
                dependency: com.apple.nvidia.driver.NVDAResman(8.2.6)
                dependency: com.apple.iokit.IOPCIFamily(2.9)
    Once the hexadecimal Addresses are edited out, it is easier to see that the problem was related to the display card. NVRM is the NVIDIA Display RAM on the card. It appears to have failed. This is not an issue with the Driver, but with the card.
    Replacing that card with an old one and having the symptoms disappear supports that evidence.

Maybe you are looking for

  • Can I use wirless mouse with my Satellite M30x?

    Hello I have a question. I have the Satellite M30x and my dealer will sell me Toshiba PA3205U-1ETC Optical Wireless mouse. In information it says it is for specific notebook models only. Can I use it with my notebook? Has my notebook this specific wi

  • Aperture 3.2 will not install.

    I am running Aperture 3.1.3. I cannot download nor open Aperture 3.2. Alert message says "Aperture 3.0 or later is required to install this update. Help please?

  • Error showing appfabric server is not configured correctly

    Hello Guys, I am getting error once I trying to install share point server 2013 on to windows server 2012. The error message shows :- What to do with error message "Windows Server Appfabric is not correctly configured. your should uninstall Windows S

  • Issue with Localization

    Hi . I am working localization for biller direct .The changes are made in the xlf file. We are facing an issue with turkish language.were some of the characters are getting replaced by "?" Can you please let me know the possible reason?

  • Background Chroma Key

    Hey guys, first of all sorry for my bad english I hope you understand what I want Is there a function in AE to subtract the background behind an object when I have the background without the object as well? (I want something like a chroma key, just f