IPhone 5s stuck while installing iOS 7.1.2

I have an iPhone 5s that was running 7.1.1. I updated to 7.1.2 and now it's been stuck on the black screen with the white apple logo with the status bar almost half way through for almost an hour. This was done over the air - it's plugged in and wifi is on - do I just leave it alone? Thanks.

I have similar problem, but when connected to iTunes. It couldn't recognized your phone and instead put your phone under recovery mode and ask to restore to original condition. But, when you clicked restore iPhone, it would take ages to verify to the iPhone software host.
Something wrong with iOS 7.1.2. I would recommend that do not update the software yet until Apple tell the real story what is happening now.

Similar Messages

IPhone-iTunes stuck while installing 5.0

Good morning,
I just prepared everything to install the 5.0 version of the software on my iPhone 3GS. While doing the job, iTunes and iPhone just got stuck, nothing is moving on and I have the Apple and a partial bar on the iPhone's screen and a partial bar on iTunes. I am afraid I will have to stop this, but how can I get back to a working phone?
Thank you all,
Pepe

Solved, thanks.

IPad stuck while installing iOS 7

The progress bar doesnt seem to move while installing the new version since yesterday.
What can I do????!
Thank you

You can try this. You may end up having to restore the iPad, but you aren't getting anywhere anyway. This might at least jog the iPad into some sort of functionality again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My iphone 4s got stuck while upgrading IOS to 7.03. How do I fix it?

My iphone 4s got stuck while upgrading IOS to 7.03. How do I fix it? It has stuck more than 3 hours.

Connect the device to the computer and iTunes and follow the information in this support document http://support.apple.com/kb/HT1808

HT4623 i got 3004 error while installing ios 7 , how to fix it ?

i got 3004 error while installing ios 7 , how to fix it ?

I was trying to update my iphone 5 to IOS7 and couldnt do it for 5 times then I did the following and was able to update it right away
Clearing your DNS cache may resolve the issue and enable you to connect to the iTunes Store.
The easiest way to clear your DNS cache is to shut down your computer completely and then restart. If you can't shut down, you can clear your DNS cache manually.
Click Start and choose Run.
In the dialog that appears, type “cmd” (don’t type the quotes) and click OK.
After the DOS prompt (C:\), type “ipconfig /flushdns” (without the quotes) and press Enter. Make sure you enter a single blank space after “ipconfig.”
Let me know if it solved the issue for you

I have iPhone 3GS, if I install iOS 4.3.5. will it be locked again?

I have iPhone 3GS, if I install iOS 4.3.5. will it be locked again?

The ONLY place can unlock an iphone is the carrrier to which it is locked and ONLY if they offer that service.
For example, AT&T in the U.S. does not unlock any iphones at all.
You can buy an unlocked iphone from the Apple Store now, but you cannot get a locked phone unlocked in the U.S.

Usually i back my IPhone with ICloud, after installing IOS 5 it asked me to restore from I Tunes what i have to do?

usually i back my IPhone with ICloud, after installing IOS 5 it asked me to restore from ITunes what i have to do to restore all my contact, applications and others?

If your iPhone does not search for a wi-fi connection before you are asked whether you want to set it up as new phone or restore a backup from iTunes, then I guess you have the same issue as highlighted in this thread:
https://discussions.apple.com/message/19638850?ac_cid=tw123456#19638850
iCloud back ups can only be accessed via wi-fi that's why you are not granted this option, I have the exact same issue.

I have a iphone 4 and while installing a program it froze how do i restore from a backup

i have a iphone 4 and while installing a program it froze now itunes says it can not read the info on my iphone how do i restore from a back up i made this morning

First, prior to connecting your phone, open iTunes on your computer and disable automatic syncing (iTunes>Preferences, on the Devices tab check "Prevent...from syncing automatically"). Now connect your phone, when it appears in iTunes on the left sidebar right-click on its name and choose Restore from Backup. When done, you can go back and re-enable automatic syncing if you prefer this.

App got stuck while installing help

I was trying to download an app and it got stuck while loading. I can't delete it. I have turned off and on my phone to no avail. I tried plugging in the phone to itunes. Help please

This happened to me when I got my iPhone. Simply all I did was turn off the Wi-Fi and it should stop saying "Loading"
What you can do is download the same app and see If it will move. Or just use iTunes to install the app.

IPhone on tilt after installing iOS 5.0.1

Hi,
I just tried to install iOS 5.0.1 on my iPhone 4 and now its on tilt, meaning it wont do anything. When i started the update (after downloading it), there was some weird error message, saying the update was faulty. Now, the iPhone is just showing the "update bar" with the apple symbol on top of it. The bar itself is empty. No button wont react and when i attach it to my computer (Windows) iTunes starts, but doesn't do anything about it. I hope i described my issue properly. Feel free to ask.
Greets and really looking forward to your help
Top|Gun

I got the exact same problem. Noticed in the morning while hoping to check out the extra features.
Taking my lunch break now to research solutions...

HT4623 iPhone got stuck while updating

hey
i have iphone 5 and I ve tried to update its iOS to latest version through iTunes but while updating it showed some unknown error, because of that now my iPhone is stuck and can't be updated.
kindly guide me how to turn it On now as whenever i try to switch it on it shows to attach it with iTunes and doesn't go ahead.
urgent!!!

See: If you can't update or restore your iOS device
What was the unknown error number? That's really critical information for troubleshooting.

Getting Stuck While Installing Oracle8i

Guys,
I stuck with a problem while installing Oracle 8i on Windows 2000 SP4. The installtion getting stuck while configuring Net8 Configuration Assistant_
Please help me out and suggest what needed to be done..
/Pradyumna

Hi,
Thanks for the quick reply. See during installtion am not getting any error. The installtion is getting stuck where the Optional service like Net8 Configuration Assistant ,_HTTP...._ comes up. Even I tried to stop the Service by clicking on Stop button, but it does not work. It showing In Progress thats all.
Oracle8i is not supported anymore but this is the csr requirement for some application which is compatiable for this version.
/Pradyumna

Got stuck while installing BAM.

Hi all,
I am stuck at the step: DATBASE CONNECT INFORMATION, while installing the BAM. Everytime I try, its giving me error saying that the Installer cannot connect to the database located at parameter #1.
Please help me in getting out of this issue.
Regards,
Vishal

I had the same issue and managed to resolve it
What you need to do is uninstall Oracle XE from the Add/Remove programs under the Control panel. You should also delete all the installation folders that might remain on your machine...
Then go to start->run and type regedit
In the Registry window that opens up, go to edit find and search for all occurrences of both oraclexe and OracleBam and delete every record that contains those words in the panel on the right. Please make absolutely certain that you deleting the right occurrences of the records as any mistake might completely mess up your system.
Reinstall Oracle XE and and OracleBAM and if your lucky like me, everything should work
Edited by: user4886758 on Nov 5, 2008 2:19 PM

Stuck while installing Essbase

Hello
Am installing Essbase on Windows 2008 R2 server and while am installing Essbase am getting stuck while the Essbase is installing OPMN . Am not able to go beyond that. Please help me with this.

Hi,
You have to look into the logs to figure out the issue with OPMN.
Look into the install logs for Essbase and reply by pasting part of the logs here so that we can help you.
Thanks,
Sourabh

SAPinst stuck while installing ECC 6.0 Ehp4 - check sum error

Dear All
I am installing ECC 6.0 EHP4. While installing i am stuck in 4th step Unpack SAP Archives.
error log from SAPinst is below:
ERROR 2011-12-14 16:19:03.118
 CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
TRACE 2011-12-14 16:19:03.118 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-12-14 16:19:03.196 [sixxcstepexecute.cpp:950]
FCO-00011 The step unpack with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|unpack was executed with status ERROR ( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).).
TRACE 2011-12-14 16:19:03.227 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option Enhancement Package 4 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/. </body></html>
Please suggest me how to remove this check sum error
thanks
sandeep

Hi,
ERROR 2011-12-14 16:19:03.118
CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
Above error implies some problem in extracting the OCL10264.SAR file from your DVD path.
There are 2 options
1) Try to extract that file manully using the command
 sapcar -xvf d:/ext/51036972/OCL_Windows_x86_64/OCL10264.SAR
 If this works, then try to update your SAPINST.EXE and repeat installation process
2) In case step 1 fails, then your source is corrupt. You need to re-download or recopy the Oracle Client DVD.
Hope this is useful.
Regards,
Deepak Kori

IPhone 5s stuck while installing iOS 7.1.2

Similar Messages

Maybe you are looking for