IPhone 5s Unable to join home network but joins other networks?

As in the question above, I just got a brand new iPhone 5s that worked perfectly with my home wi-fi for about 5 hours untill it suddenly decided it didn't enjoy being connected to it and immediatly broke the connection. after that I tried getting it to connect - even resetting network setting and restarting both device and router- but still the same message comes up "Unable to connect to 'Network'". I would really love some help on how I can fix this besides going to genius bar or something like that since there aren't any in my country. and I doubt the place I bought it from would give me a refund or replace it. Keep in mind that it still connects to other networks. It's just my home network that it's having problems with. Also, other devices in my house are working just fine with the home network.

If your device is connecting with other wifi devices other than that of your home local wifi/router you need to be thinking strongly about what is going on with the device that you aren't connecting with. How far in distance are you from the wifi at your residence? How old is the router you're using at home? After resetting your network settings have you ensure you took the time to reset the password from your mobile device to match that of your home routers password? If your device is working elsewhere just fine and not at home you may want to start your troubleshooting more towards the router rather than the mobile device.

Similar Messages

Problem viewing streaming video in some wifi networks, but not others

When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
<m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
At the Apple store the popup never appeared, and the videos downloaded and played.
I have no trouble playing movies I have downloaded from iTunes.
I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
I am curious that it the problem happens at two places, my diner and at work.
The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
I do not have WiFi at home
Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
Thanks for any thoughts or suggestions,
Paul

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

My iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

my iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

my iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

Allow Internet but block other network connections ?

I am using my Airport Extreme (b/g) only for connecting my Wii/Internet radio devices to the internet. I also have a NAS and my computers attached to the network but because the AE is set to WEP and I am worried it is too easy for someone to break in to it and get access to my shared data in the network.
My network is:
Netgear WNR3500L wireless router connected to:
DSL Modem
Netgear ReadyNAS
Netgear Powerline Adapter
Airport Extreme
So can I allow internet but no other network connections through the AE ?
Neil
Message was edited by: Neil Coxhead UK

My advise is..
If you do not have at least two game consoles behind this router, turn off UPnP in the router.
This is done in the router at Advanced -> UPnP.
By game consoles, any two..
#1 For example: X-box, PlayStation.
#2 A special type of computer with no keyboard or mouse. And it is usually connected to a TV.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Why does Firefox open 3 Tabs all the time when I open it? One is my home page but the other 2 are about plug in being installed. How do I make that stop?

When I double click Firefox to open it, 3 Tabs automatically open. One is my home page but the other 2 are about plug ins being successfully installed. I want for only my home page to open. How do I make this stop?

But there aren't any symbols. It's just set to http://www.yahoo.com
And every time I open Firefox, it opens with 3 Tabs, one of which IS Yahoo but the other 2 a regarding plug ins being successfully updated. I've even gone as far as to uninstall those plug ins and it still opens with 3. About ready to uninstall Firefox and stay with IE

TS1398 I only want my secured network wifi but keeps searching for others. Tried turning on an off wifi and on and off secured networks and ignore other networks, but keep coming back. Any suggestions.

I only want my secured network wifi but keeps searching for others. Tried turning on an off wifi and on and off secured networks and ignore other networks, but keep coming back. Any suggestions.

That's not the way wifi works.
You may see the other networks but you are not connected to them in any way.

My IPhone 4 never connects to a Wi-Fi network. It's supposed to connect to "known" networks automatically. Other networks pop up but the join box never is active. My Wi-Fi and Ask to join networks are both "ON" but nothing seems to work. Would appreciate

My iPhone 4 never connects to a Wi-Fi network even though it's supposed to connect to ?known? networks. My Wi-Fi and Ask to join boxes are both "ON." Other networks pop up but the "JOIN' boxes never work. Would appreciate some help on how to connect. Thanks

Never has or this is a recent development?
If no change after resetting network settings at Settings > General > Reset > Reset Network Settings, try restoring your iPhone with iTunes as a new iPhone or not from the backup.
If no change after that, your iPhone has a hardware problem.

5C will no longer connect to my home network, but all other devices do.

We had a service interuption and lost the wifi network at home for a while. When the network came back my 5C will no longer connect to the network, even though all of the other devices will. It will connect to wifi on other networks. I reset the router first. On my phone I have updated to the latest IOS, shut the phone off, forgotten the network, reset the network settings and reset the phone settings. Still will not connect to the network. It acts like it is trying but never makes it. I do not recieve an error message of any sort. What is the next step?

Good day Telbuoy,
Thank you for contributing to the Apple Support Communities.
It sounds like your iPhone 5s is not connecting to your home Wi-Fi network. You've done a good job of isolating this behavior to your iPhone and home Wi-Fi router.
There are a few more steps that I'd suggest trying next:
Make sure your iPhone is updated to the latest iOS version using the steps in Update the iOS software on your iPhone, iPad, and iPod touch.
Make sure your router is using the settings in Recommended settings for Wi-Fi routers and access points.
Update your Wi-Fi router with the latest firmware and make sure the router supports your Apple product. For more information, contact the manufacturer of your router. (from If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network)
Best Regards,
Jeremy

Recognizes Network but 'Join' Option is Greyed Out

Hi All!
I'm visiting my parents in Brasil for the next 4 weeks. They have WPA wireless internet in their house. My MacBook Pro's (OSX 10.5.8)airport sees their wireless network and allows me to type in their passowrd. BUT, the 'Join' button is greyed out. So I can't log onto it. Why is it greyed out? I've tried restarting a few times but to no avail. I've also tried other networks but I have the 'join' option with them. Ummmmm...I'm stumped.
I've checked a variety of different forums and did some google searching but can't find anything. Any help would be greatly, greatly appreciated. Thank you.

See this https://answers.yahoo.com/question/index?qid=20131119125513AAtRloc
I just did it. To enter DFU mode, I had to use "method 3" on this post
http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode
Too bad my 4S is 2 years old. Wifi is dead. I had to upgrade to 5S, but 5S is soooooo much faster than 4S so it's kind of good outcome. Without the 4S breaking down, a stingy person like me would have never upgraded the phone.

[SOLVED] Puzzled: Web site visible on network but not outside network

Edit: Ok, nevermind . . . somehow the problem has resolved itself. Perhaps my ISP was having a bad hair day or something.
I'm puzzled by this small problem I'm having. It is NOT a critical problem or anything, just something I'd like to solve.
I've installed the LAMP packages, set up a small MySQL database and made a very simple web interface for it. The web pages open fine on my main computer and all the other computers on our network, but it is not visible outside our network.
I am behind a router and I have forwarded port 80 to my local IP. I've set httpd: ALL, http: ALL and (finally) ALL: ALL: ACCEPT in /etc/hosts.
I got to thinking maybe my ISP (RoadRunner) is blocking port 80 requests to my home, so I changed the port to 9292 and forwarded that to my local IP. Still not visible from the outside.
I've tinkered with the /etc/httpd/conf/httpd.conf file (pasted in below) but still there is no outside connectivity, changing the listen settings and the server name settings. I can still access it fine from this side of the router. I've restarted the httpd service many times.
I've done all I can think to do to solve the issue. it is likely I am overlooking something very basic. Any help or ideas are appreciated. Below is my httpd.conf.
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 192.168.1.100:9292
#Listen *:9292
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
LoadModule php5_module /usr/lib/httpd/modules/libphp5.so
AddHandler php5-script php
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName 192.168.1.100:9292
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
Include conf/extra/php5_module.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Last edited by Rumor (2009-01-29 15:04:27)

You could try a factory reset of the home hub, as sometimes the config can get corrupted.
There is some general help on this page.
Help with setting up routers, wireless repeaters, TVs and printers, CCTV cameras, VOIP Phones
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Wifi Does Not detect my network but does others

Hi there,
I managed to get great responses last time I had an issue and now I'm back.
Here's the issue and I will also say what I've tried so far to fix it.
ISSUE
On-and-off my laptop cannot detect (and hence join) my own Wi-Fi network, even when right next to the router. My neighbours' networks are all visible.
This issue is not consistent and is sporadic.
It is not a hardware issue - I'm currently (reluctantly) logged into my Windows partition and am happily using my Wi-Fi connection through that.
It's not a router issue as
a) It's a new router
b) I can connect through Windows (as can my wife on her netbook)
c) My iPod Touch connects no problem.
My network is not a hidden network, it is fully visible. It is, of course, a secured network and no-one but me knows the password to the admin panel of the network.
_WHAT I'VE TRIED_
a) Restarting the computer doesn't fix it
b) Removing the connection settings from 'Networks' and restarting it doesn't fix it
c) Deleting the system preferences list from Library|SystemConfig|Preferences doesn't fit it.
d) Turning the router off for a while and then back on doesn't fix it.
e) I've just done a DiskWarrior check and that didn't fix it.
I have also done a complete reinstall of Leopard and then restored my files etc from my external hard drive (configured to use Time Machine).
I don't know whether I've covered everything, but it's certainly a start.
A couple of weird things - sometimes leaving it overnight means it re-finds my network - but no explanations. And the fact that this issue is inconsistent.
Please help, as I really am getting tired of it (I've tried working around it for a couple of weeks now) and am out of ideas.
Many thanks in advance,
Martin

Hi Martin,
It sounds to me like an IP address problem.
Under "Applications" go to "System preferences", then under "Internet & Network" select "Network" Select the kind of network you want to connect to, go to advanced under "TCP/IP" It should say "Using DHCP"
Write down the IP address.
Try renewing the DHCP lease. Then try connecting to the network.
If that doesn't work, find a computer that can connect to the internet and check the IP address of that computer the first three sets of numbers should match the IP address you wrote down, if they don't normally I would have to tell you to go through terminal and find an unused IP address to select, but considering you probably are never going to access the network through both parts of the partition at the same time, you can safely use the IP address that Windows has. How to get that IP Address I can't really help you with though...
Once you pull the IP address that the windows side is using go back to the advanced settings page and select "use DHCP with manual IP address" in the space for IP address enter said IP address, and click apply. And hopefully you will be having a grand ol' time on the web.

Airport card 802.11b sees other networks but NOT my network!

Hi. Having a very strange tech issue today...
I have a 1ghz ti-book that no longer wants to connect or even SEE my home network after waking up from sleep. Up until today there has never been an issue. My home network is distributed via a Netgear 802.11b and g wireless router. Again, I have never ever had any issue whatsoever connecting to my network. WEP is enabled. There are also 6 other computers all connecting to the same network via wireless too. No problems.
The crazy thing is I know the card is still functioning properly because I can still see all the other available networks around in my area. Even when I place the ti-book RIGHT NEXT to the antenna on the netgear router, it refuses to acknowledge that it is there. Meanwhile, it is showing all of my neighbors networks just fine!
The only variable in this equation is that the hinge of the display is damaged, such that it won't stay open "by itself". The display normally has to be propped up against something. The machine works fine otherwise, no issues. The weak bezel breaking is an issue that many ti-book owners faced and it has been broken for a LONG time with no performance issues at all. The only thing I can think of is that maybe the wire to the antenna for the Airport card goes up the side of the display and somehow the wire is damaged or frayed. I don't know if this is how the ti-book was designed....does anyone know? Specifically, if the wire for the airport card runs along inside the case of the display on the 15 inch 1ghz ti-book?
If it does not...and it seems like it is not hardware damage to the cable because how else could I still be getting other networks but not my own...then I am stumped as to how to trick my machine into recognizing the network again. I have done the basic things such as booting into single user mode and rebuilding my index, logging in as root and other users to see if the preferences were corrupt, and even installing a bunch of wifi wardriving apps to force recognition of my network and still nothing!
Again the machine is right next to the access point, so what is causing it to no longer "see" it? I also updated the firmware in the router and checked configurations but no changes have been made and all the other machines work fine. Also it has NEVER done this before so I don't know how to troubleshoot it!
*What would cause an airport card to reject the signal that it is configured to connect to? How should I go about getting it to see the network again...without reconfiguring the network which would mean having to update all the other machines, etc.* I have macstumbler and istumble running and they see PLENTY of networks except for the closest one. It is so bizarre. It was working when I went to bed and now today, no network. I have rebooted numerous times, etc.
please help!! i need some ideas!!!
thanks!

a somewhat in depth search across the interwebs has lead me to the conclusion that this problem is also affecting Leopard users as well. (I am on old hardware and running the latest Tiger) To be honest, I can not remember if there was an Apple update right before this problem started to happen. However, it seems real enough and many users out there are having problems re-connecting to their home/work networks after waking from sleep.
just to clarify:
Using a ti-book with normal airport card installed (b not g)
Connected to a Netgear wireless router (configured to manage both b and g traffic)
WEP 64bit encryption key is being used for network
No problems whatsoever until a few days ago
what works:
unplugging the power to the Netgear router (cycling power)
what doesn't work:
waking from sleep
restarting
manually entering network name and password
using 3rd party apps to find network
resetting/deleting Network location preferences and creating new one
deleting AppleAirPort2.kext from /System/Library/Extensions/
using either Diagnostic or Assistant mode to reconnect from scratch
it should NOT be this difficult to solve a networking issue. what is going on here?

MacBook Pro can't see Airport network but three other macs in house can

Very strange. I can connect my three iMacs (G3, G5 PowerPC and G5 Intel) to my Airport Extreme Network, but my MacBook Pro can no longer see the Network, and Airport utility (from MacBook Pro) cannot see the Airport base station (although other macs' Airport Utility can no problem). My MacBook pro can see 4 other networks (my neighbours' networks). Doesn't seem to be a problem with my MacBook Pro airport card as I can connect to the (non-Mac) wireless network at work with no problem. Am really confused (not the first time)!
Installed the latest Airport Extreme firmware last week, which was the start of the problem, as I then lost the ability to connect to my Virgin Media Broadband digital TV box, necessitating Virgin engineer visiting at weekend to connect a cable modem to the cable tv box, to which the Airport Extreme station is now attached. Had problems connecting my MacBook Pro last night, but eventually managed it. All other macs connect seamlessly. Am stumped.

I'm troubleshooting a friend's MacBook (Model ID: MacBook4,1) that is having serious Airport problems. This machine's Airport can't see ANY available networks. Sitting right next to my MacBook (identical model), hers is blind while mine can see several open and locked networks including my own Airport base station. If I choose to "Join Other Network..." and enter the network name and password for my network, her machine almost immediately gives me a "Connection timed out" error. It doesn't matter where her MacBook is, it can't see any networks anywhere.
This is a new problem as her Airport was working fine for the first few months. I've just finished making sure all software updates have been applied so she's now running the latest-greatest, but still no Airport.
This sounds similar to the problems other folks here are describing so I figured I'd add my voice to the chorus. I guess I'll take her machine down to the local Apple store this afternoon and see if they have any ideas. At this point I wouldn't be surprised if her Airport card was fried.
Calenlas

My mac wont connect to the wifi network but all other devices are working fine! Please can you help

My Mac wont connect to my WiFi. It can see the network but has an "!" over the WiFi signal. My iPhone and Surface connect fine. My Mac was working fine yesterday. I've restarted the rooter, the Mac and still not luck. I've changed the WiFi channel, removed and re-added the WiFi network, but I still can't connect. Please can someone help.... thank you !

Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US

Apple TV won't connect to the network, but all other devices will.

It's just the apple tv. my computer, iPhone, iPad all connect to the wireless no problem but all of the sudden the apple tv says it cannot connect to the network. I tried powering down the apple tv and tried resetting it but it will not connect. any tips? thanks!

Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections

IPhone 5s Unable to join home network but joins other networks?

Similar Messages

Maybe you are looking for