IPhone 6, 16GB, unable to activate, iTune Logo is red
iPhone 6, 16GB, unable to activate, iTune Logo is red. Is this a hardware issue ?
Contact AppleCare - iPhone is under warranty OR take it to the Genius Bar.
CCC
Similar Messages
-
The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help
iPhone 3GS, iOS 6Your iPhone was "unofficially" unlocked by some means to work with a different carrier. Now that you have updated it has relocked to the original carrier. If you do not know who the original carrier was you will need to call AppleCare and give them the model and serial number of your iPhone. Then you will need to contact that carrier to see if they have a process to unlock the phone and if you qualify.
-
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
Iphone 5 screen is stuck on itunes logo and USB cable?
iPhone 5 screen is stuck on iTunes logo and USB cable. Reset does not work.
Place your device in recovery mode as explained here:
iOS: Unable to update or restore -
Hello. My iphone 4 got stuck on the itunes logo. I had to restore it and have lost everything. Is there anything I can do to get my photos back?
Not easily, the recovery mode erases the device, but you can see if any of these data recovery tools may work: https://discussions.apple.com/docs/DOC-1689
-
HT4061 My iPhone 3 screen will only show iTunes logo with a USB plug how do I fix this
I need help my iPhone 3 screen only shows a iTunes logo and a USB plug
The device is in recovery mode. See this support document. http://support.apple.com/kb/HT1808
You may have to do this more than once. -
HT201407 IPhone after restor unable to activate I want solution 3Gs
IPhone after restor unable to activate I want solution 3Gs
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier? -
Should my iTunes logo be red when in recovery mode (dfu mode)
should my iTunes logo be red when in recovery mode (dfu mode)
Tthe itunes logo has changed in ios 8 and in OS X Yosemite , it is now red.
-
Dear Friends, i did not update the latest public version of iOS6, but unfortuantely my beta 4 expired and messages displays like "Activation Required" and when i try to activate it says server is busy and unable to activate. I have installed latest version of iTunes and still unable to restore. What should i Do? Kindly help me to activate my iPhone 4s
You need to post this in the developer's forum.
-
i had a third update showing on my iphone 4, i had already updated to the 07 and downloaded the second update to help fix bugs etc. the second update only took a few minutes unlike the first original update that took 4 1/2 hrs! when i saw the third updade i plugged in the phone, connected to wifi and hit update. it showed the apple sign and the bar underneath showing the progress. i left the phone to do its thing and when i went to get it about 1/2 later the phone had a itunes logo and and a picture of a charger showing. it would not do anything. it was frozen. i looked up online how to fix it. it told me to connect to itunes and then to restore. it would make sure that i could keep my contacts and pictures. the restore took 3 hrs, as it started at 78 min which actually took way longer, then when there was only 30 min left it stopped and went back to the "do you want to restore" question and i had to start all over. when it was finally done, i still have the itunes logo and its still frozen..please help!
See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
How do i fix a iphone thats stuck on connect to itunes logo
Okey so i have a problem with my iPhone, its stuck on the connect to iTunes logo and i can't seem to make it go away and i didn't want to use the restore button on the iTunes app but finally i gave up but even that didn't work it said error (4013) if you guys have a solution without using iTunes restore button that would be great ! thank you in advance HELP ME PLS !
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode
Use iTunes to restore your iOS device to factory settings - http://support.apple.com/kb/HT1414 - "You can use iTunes to restore your iPhone, iPad, or iPod touch to factory settings and the latest version of iOS. Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info."
iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 -
HT1267 iphone 4s 16GB white not activate.
Hello! just then I have acquired a customer's iphone 4s 16GB white, but then I could not activate, itunes error message Your request could not be processed. We're sorry, but there was an error processing bạn. Please try again later.
I must now how to activate my iphone?
imei: ******
Serial: C3******DTD0
Thank you very much.
<Edited by Host>Apple does not use the term "factory unlocked" at all.
You can not activate it without a SIM at all. You will NOT be able to use that phone on any CDMA carrier, including Sprint and Boost Mobile. If you want to use a CDMA carrier, you must purchase a phone made for their network.
If you want to use that phone (assuming it's legitimately unlocked) you will have to use a GSM carrier like AT&T or T-Mobile. -
My friend has a iphone 3, it won't turn off from the sync to itunes logo and also has error code 3253. when its plugged into itunes, itunes can't pick it up!! any help would be appreciated!
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode
Use iTunes to restore your iOS device to factory settings - http://support.apple.com/kb/HT1414 - "You can use iTunes to restore your iPhone, iPad, or iPod touch to factory settings and the latest version of iOS. Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info."
iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 -
Iphone iOS8 update black screen with itunes logo
okay Im really freaking out, because I have an iphone 5 and I connected my iPhone to my laptop (not macbook) so it took about 3 hours to get ready to update (I copied my iphone in my computer before update), so when it finished, my phone went to the white screen with the apple icon, so I closed my laptop and reopened to see if it was okay and the update was still going. But when I got to iTunes ones again it said error with the update and now my iPhone is in "recovery mode". And the only thing in my phone is a black screen with the Itunes logo an the charger meaning to plug it in. Please somone help me Im freaking out and I dont know what to do!!!
Hey elisacalzadilla,
If your iPhone is already in recovery mode, you may need to simply continue with restoring the phone using the information in the following article:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden -
My iPhone 4S is frozen. I had it plugged into my PC all night trying to update to the new iOS 7. This morning my iPhone was frozen with a connection cord and above it an arrow pointing to the iTunes logo.
Your device is in recovery mode. You have to restore your device. See this support document. http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Why does my HP LaserJet 4 Plus put out blank page after print page?
why does my laser Jet 4 Plus put out a blank sheet after every print page
-
Cost of Inventory for Special Stock- (Sales Order Stock)
Dear All, We manufactures "x" materail under Make to Stock and Make to Order Scenarios. We carried the standard cost estimate through CK11N and released through CK24N. There is a value of "X". Also we carried the sales order cost estimate that is val
-
How to Create a Custom Title in Motion for FCPx
I would like to make something like the "torn edge" title in Fcpx with the following animation; it would move up from the horizon at the bottom of the screen, display the appropriate text for its position in the movie timeline and then drop down and
-
FacesContext not initialized in certain error conditions?
I ran into an interesting problem today (I am using RI 1.1.01). I have a servlet which acts as a global exception handler. All exceptions which are caught by the container are forwarded to this servlet (as configured in web.xml using error-page). Thi
-
Required storage location manditary in VL31N
Dear SAP Guru's Please tell me the path for making the storage location field manditary in VL31N( Creation of Inbound Delivary). Thanks. Sri