IPhone 6 connection to iTunes lost
I have a new iPhone 6 and my MacBook Pro is completely updated to Yosemite. Since the update I've never successfully been able to complete a full sync of my data to my iPhone 6. Each time I connect via the usb my phone makes it through the back up but then i get this message "The iPhone could not be synced because the connection to the iPhone was lost.
i've tried a new cable. A different usb port. I've restated my computer. Etc etc. Any suggestions? I'm at a loss.
thanks -
Spencer
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.
Similar Messages
-
My iPhone says connect to iTunes but i synced it to a different computer and my lock/sleep button is broken so i cant turn it off. I tried letting the battery die so I could try out the iPhone recovery method however it didn t work that way either. Any h
The only way out of Recovery mode is to connect to iTunes and restore. If you cannot access the computer you normally sync with, you will lose all of your content, unless you sync to iCloud. With no backup present, your content will be lost.
-
My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
-
Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..
iOS: Forgot passcode or device disabled - Apple Support
-
I disabled and blocked my phone when it was stolen, i have retrieved the phone and restored service. Now when i turned it on it says iphone disabled connect to itunes.. I have and no change, what do i do?
You need to restore the phone in itunes in order to use it again, You will have to put the phone into recovery mode and restore to factory settings http://support.apple.com/kb/ht1808
-
I have the right update of itunes but my iphone wont connect to itunes? What do i do?
I have the right update of itunes but my iphone wont connect to itunes? What do i do?
Hi jskills,
If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may want to take a look at the troubleshooting steps in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Brenden -
HI,
I HAVE AN IPHONE4, I CHANGED MY PASSCODE BUT FORGOT WHAT IT WAS THE NEXT DAY, AFTER SEVERAL ATTEMPTS TO UNLOCK MY PHONE BECAM DISABLED AND SAYING IPHONE DISABLED CONNECT TO ITUNES, HOWEVER MY PHONE ISNT SYNCED TO ITUNES NOR A COMPUTER, PLEASE TELL ME WHAT DO I DO AND HOW TO REGAIN ACCESS TO MY PHONE?You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Good luck! -
Hi my friend gave me an iphone but on the screen it says 'iphone disabled connect to itunes
I have got an iphone 3 from my friend that had been used by his ex wife. The phone says ' iphone disabled connect to itunes.
She 'cant remember her passcode'
I have put the phone into restore mode and connected to itunes, ( i downloaded the latest edition ) but it says its going to take 3 hours to download software - its still downloading and then earlier I got an error code oxE800002D. I cant find the error code so dont know what it means.
I dont know if I am wasting my time trying to get it working or if it will be possible to get the phone in working order ( with lots of help from you all :-) )
Any help or advice will be gratefully recievedThanks.
I did this and moved on a little but now am getting error code 3194.
i looked on the support site but dont really understand
Any ideas ? -
My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?
You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Good luck! -
TS1538 How to starting the '' Apple mobile device '' on my iphone to connect on itunes?
How to starting the '' Apple mobile device '' on my iphone to connect on itunes?
Refer here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567 -
My phone says iphone disabled connect to itunes, what do i do to get my phone back
Connect the iPhone to your computer and restore via iTunes. Place the iPhone in Recovery Mode if necessary to allow the restore.
For how to restore:
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
My iphone is locked. its says iphone diasabled connect to itunes.. what do i need to do from here..?
Open iTunes on computer, connect iPhone to computer with USB Cable, Restore iPhone.
-
The number pad would not let me type in a 1 2 3 for my 4 digit code. After numerous tries, the phone now says iphone disabled connect to itunes. When I connected to itunes, it asked for the code which I was unable to enter. Help!
Open iTunes on computer, connect iPhone to computer with USB cable. Hold both Home and Power buttons on iPhone until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
-
downloaded ios 5, but my iphone wont connect to itunes ( haven't installed ios5)
Hello Apple_Addict22,
Thank you for your question. iOS 7 requires iTunes 11.1. First, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.
Maybe you are looking for
-
IDoc included in IDoc packet containing an error: transfer it separately
Hi Gurus, I'm having this problem in our ECC side. I already did what Michal said in his blog: /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change I have bundled the multiple IDOCs into 1 MATMAS. But I'm sti
-
Ipod freezes when trying to sync/sometimes reboots my computer?!?
I have a 20 gig ipod from 2004 (click-wheel with no color screen) that I have been trying to update my library on. Every time it tries to sync, it freezes and I have to plug it into the power supply in order to restart it. It also won't take any new
-
Hi, on 10g R2 , on AIX 6.1 is the password file name format important ? What is it ? Is the following a correct format : orapwdMYDB It is said in documents : For name and location information for the Unix and Linux operating systems, see Administrato
-
Portal runtime error when accesing erecrutiment administratoe role
HI Expert, we are implementing ERECRUITMENT in EHP4 , i have assigned erecrutiment administrator role for an user but when he is trying to acces it he is getting portal runtime error as Portal runtime error. An exception occurred while processing y
-
MSOs are jumpy...
Is anyone else experiencing a jumpiness in their MSOs? We have several MSOs that are set to auto play to create a simple animation, but the state changes are jumpy and look like they go back and forth between a raster and vector display. We solved th