IPhone 6 Controlcenter dosen't work...

Hey,
the Controllcenter dosn't work in the homescreen...can anybody help?

Hey, it is only in the home Screen, i can't slide up the controlcenter, if i slide up nothing happens or
sometimes when i slide up very fast the Controllcenter comes up, but this doesn't work every time.
In the lockscreen evrything works fine.
I called the Apple support but they also didn' have a solution yet, I have send them a Video about the problem,
and now some engenieus hopefuly have a sleepless night...;-)
Thats the first time they have such a problem...
gretings
KA

Similar Messages

It dosen't work to atctivate my iphone,pleas help me!

I had jailbreak instaled in my iphone 4 and now my iphone dosen't woork my english may be bad because I live in Sweden.
Now I have restored my iphone and it dosen't work to activate it pleas can some one help me!!!

No, no one in an Apple hosted forum can help you with a jailbroken phone. It won't activate BECAUSE it is jailbroken.

Handoff dosen't work between Macbook pro Retina Mid 2012 & iPhone 6

My Macbook Pro Retina Mid 2012 dosen't work in handoff with my iPhone 6 or my new iMac late 2012,
Handoff option in the system preferences is allowed and i log in with the same iCloud in all my devices ,
and its only work with the phone calls and messages but not for the safari or iWork's apps.
Help plz!

Your MBP is too old to support a 4k display:
http://support.apple.com/kb/ht6008
Ciao.

HT1937 i have an iphone that i bouth in italy, but now in israel it dosen't work with the israeli sim, what should i do?

i have an iphone from italy, but now in israel it dosen't work with the israeli sim, what should i do?

Contact the wireless carrier to which the iPhone is locked and
ask that carrier if they provide unlocking and if you qualify.
What is the exact wording of any error message you receive?

My iphone dosen't work or recharged because of completed electricity

i have iphone 5c 16G with an updated system iOS 8.1.2
i used it until it's bettery charging completed, then when i try to rechrge it, it dosen't work.
only the apple appear on the screen then disappeare
please help me,
what can i do?

Hello wadhahfromsanaa,
Welcome to the Apple Support Communities!
I understand that your iPhone will not power on past the Apple logo and will not charge. In this situation, I would recommend reading over and working through the steps provided in the attached article.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Have a great day,
Joe

I've downloaded apps. on my iphone 4 and it dosen't work ??

i've downloaded apps. on my iphone 4 and it dosen't work ??

Reset your iPod (hold down home and power buttons until the iPhone restarts).
If that doesn't work, hold down power button only until the iPhone turns off, then hold it down to turn it on again.
if that doesn't work, then restore your iPhone through iTunes, but back your device up FIRST so you don't lose data. http://support.apple.com/kb/HT1766

My Straight Talk Official Iphone's data dosen't work, how do you fix?

My Straight Talk Official Iphone's data dosen't work, how do you fix?

This is my exact issue too,
I can temporarily restore this function by going to
Settings
General
Siri, and turning Siri off then on again.
But after some hours, or by the next day it happens again. Hope this helps.

UBLR dosen´t work in an interfaces trunk?

I´m configuring Aggregate policer in a Sup720-3B, I need to configure Aggregate Policer in a Trunk interfaces, It´s required to limit the bandwidth for vlan to L2 through an interface trunk, between two catalyst. But it´s dosen´t work. The configuration that I am using is:
S6509#run int giga 3/2
Building configuration...
Current configuration : 167 bytes
interface GigabitEthernet3/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
service-policy input LIMIT
end
S6509#
S6509#show ip access-lists TRAFFIC
Extended IP access list TRAFFIC
10 permit ip any any
S6509#
S6509#show class-map Daniel
Class Map match-all Daniel (id 1)
Match access-group name TRAFFIC
S6509#
S6509#
S6509#show policy
S6509#show policy-map
Policy Map LIMIT
Class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#
S6509#
hostname S6509
boot system flash disk1:s72033-advipservicesk9_wan-mz.122-18.SXF14.bin
logging buffered 32768 debugging
logging rate-limit all 1000
enable secret 5 $1$Oewp$4FbojEBx0Nn.sXO1ZzhIj/
class-map match-all Daniel
match access-group name TRAFFIC
policy-map LIMIT
class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#show mls qos
QoS is enabled globally
Policy marking depends on port_trust
QoS ip packet dscp rewrite enabled globally
Input mode for GRE Tunnel is Pipe mode
Input mode for MPLS is Pipe mode
QoS Trust state is DSCP on the following interface
Gi3/4
Vlan or Portchannel(Multi-Earl) policies supported: Yes
Egress policies supported: Yes
----- Module [5] -----
QoS global counters:
Total packets: 233
IP shortcut packets: 0
Packets dropped by policing: 0
IP packets with TOS changed by policing: 0
IP packets with COS changed by policing: 0
Non-IP packets with COS changed by policing: 0
MPLS packets with EXP changed by policing: 0
S6509#
S6509#
S6509#show policy-map interface gigabitEthernet 3/2
GigabitEthernet3/2
Service-policy input: LIMIT
Class-map: Daniel (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name TRAFFIC
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
S6509#

Contact the wireless carrier to which the iPhone is locked and
ask that carrier if they provide unlocking and if you qualify.
What is the exact wording of any error message you receive?

The sound chip dosen't work, i need to repair...

i have an 4s iphone, and the sound chip dosen't work, i need to repair...
is it possible a solution? If I leave it in the apple store, can they resolve the problem?

If you have not done so already, try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If you try restoring from a backup and that doesn't fix the problem, try restoring to factory settings and, if the problem goes away, then sync back your apps and content. You'll lose the app data and settings, but if the problem is due to a corrupt cache or settings file, that should cure it.
If none of that helps, your device may have developed a hardware fault and will need to be take or sent to Apple. They will replace the iPhone; they do not repair yours.
Regards.

My microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

my microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

HI there,
Please see the video link below to learn how to remove the pairing from your iPhone, powercycle the phone, reset the BlueAnt Q2 (please check which BlueAnt device you have and reset as approopriate) and then pair with iPhone again.
http://www.myblueant.com/support/videos/Q2/iPhone/remove_and_reset/
If this does not resolve your problem please contact our customer support team on +1 855 9 BLUEANT or +1 855 9 2583 268.
Hope this helps
Scott

HT201412 Iphone 4S screen stops working from time to time

Iphone 4S screen stops working from time to time.
sometimes for a few seconds, or sometimes many hours.
I've resetted it when this happens, with no luck.
I've restored it from back up, and the problem still persists.
What can i do?

Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well.

My new iPhone 4 doesn't work at all

You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
Message was edited by: HighSierra

So what to do besides complain? Troubleshoot?
I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
My (temporary) workaround?
To spare the battery:
*Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
*turn off push and fetch, have mail get new messages manually
*turn off data roaming
To keep the signal somewhat stable (making it easier to complete calls and spare battery)
*Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
*grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
*pray the free bumper will a) come soon and b) help. I'm not optimistic.
To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
*use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
*keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
null

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

Facetime works fine on my iphone, but will not work on my MBA.

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

I m in from bangladesh 7days ago I bought an iphone 4 but not work with sim card. no service.

7days ago I bought an iphone4 from my friend Mithu who come from Singapore.
He told me he that after 7days he come dhaka and open my iphone by using sim. but 4days ago he died on road accident.
He didn't give me any documents & I also knocking his family for that but said they didn't know about iphone. but i cut a sim & insert it in my iphone but showing no service, some time no sim.
How can I work with my iphone,
plz plz plz advise me. I hv not enough money to buy another one,
Plz help me remembering steve jobs.
Version------- 4.2.1(8C148).
Carrier Lab 9.0
Model MC603B.
Serial---8602613MA4S

The iPhone 4 may not work with a cut down SIM. Get a microSIM from your carrier when you set up service.

IPhone 6 Controlcenter dosen't work...

Similar Messages

Maybe you are looking for