IPhone 6 Health App not tracking anything

I was hoping 8.1 would fix the Health app, but it's still not working for me.
It doesn't track any steps.  When I restart the app my dashboard is reset to empty and I have to add things back on the Dashboard.
Is anyone else experiencing similar issues?

nappin,
Mine seems to be working much better now. I find that there is often a lag of up to 15 minutes between the data being taken and the time it shows up in the app.
I one instance, it shows that I climbed a flight of stairs at 10:03, but it was not added to the health app until 10:15. For other data the two times match.
I don't know why your data does not display on the dashboard. Perhaps you can find an answer in some of the other threads on this topic.

Similar Messages

  • Health app not tracking my workouts anymore

    I have noticed that endomondo does not share my bike routes anymore. I restarted my phone and reinstalled the endomondo app and allowed it to share to the health app.
    But now health app says that endomondo is a source, but does not allow me to choose what would be imported to the health app. It used to work fine, now it does not work at all. Sometimes health app records my steps, that is it. Anyone?

    Hi I am using MyFitnessPal and Strava, I have noticed this very same problem, There is another thread looking into this, with a suggestion that a hard reset may correct it. In my experience that didn't work.
    From what I can tell the data , ie Steps , flight climbed is still logged and available as I have noticed mine coming and going over the past few days. (almost as things a written to Health App).
    I think it is going to require a software update to fix, either Apple or the App causing the problem.
    iPhone 6.0 , iOS 8

  • Health app not counting calories - "No Data"

    Recently purchased an iPhone 6 and have updated to iOS 8.2. The Health app is counting steps and walking & running distance, but Active Calories and Resting Calories display "No Data". I have entered my weight, height, age and sex. Am I missing something here? Is the Health app not supposed to automatically calculate and record calories burned?

    As far as I know, automatic step tracking is only available for iPhone 5S or higher due to M7/M8 motion co-processor.
    Edit: Confirmed by an article on 9to5mac.
    ''Users will find that the M7 is able to pre-populate the Health app with a full week of data.
    Adding on-device tracking support to the Health app is a significant addition from Apple as iPhone 5s (and future iPhone) customers will no longer even need to integrate any App Store apps or hardware devices to begin using the software.'
    Taken from this article on 9to5mac.

  • HT1338 I have a Mac OS X Version 10.5.8. Just updated my iphone 5 & can not back anything up from itunes because my software on my mac is not up to date. What software should I now have to be up to date? Im so confused by all that is offered! PLEASE HELP

    I have a Mac OS X Version 10.5.8. Just updated my iphone 5 & can not back anything up from itunes because my software on my mac is not up to date. What software should I now have to be up to date? Im so confused by all that is offered! PLEASE HELP ME.

    Hi
    You need to upgrade to the next OS 10.6 Snow Leopard by purchasing the DVD online.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    and once installed, use Software Update
    - to update to 10.6.8
    - and update your iTunes.

  • HT6357 Which apps work with iPhone health app or HealthKit?

    Which apps work with iPhone health app or HealthKit?

    There are several. I have apps associated with two motion monitors and they work.
    Look for apps you need, read their specs and if it doesn't clearly say they work with the Health app, ask the developer if it does.

  • Do I have to use another fitness app in order for the new health app to track my fitness? Or does the health app have its own gps tracking? It's not working for me.

    I have the iphone 6 ios 8.0.2. The health app hasn't worked for me yet. I have pinned things to my dashboard but it isn't updating anything. I curious to know if I need a third party app in order for it to track? Or if it is supposed to be tracking?

    The iPhone 6 has a built in M8 coprocessor that tracks steps. Start with the manual:
    http://support.apple.com/manuals/#iphone
    p. 120.

  • Disable Health app step tracking?

    Hi all,
    I use a product to track my steps (Misfit Shine), the problem seems to be if I have both the shine with me and my phone with me, it's doubling my steps.  i.e.: Today I had a really slow day and didn't get to walk as much as normal.  The shine showed about 3800 steps.  Synced into Health I was showing 7200.  So right now it looks like it's doubling some of the data about walking... I'd really like to stop the health app from reporting steps taken so I can just have the Shine submit steps to Health.

    I had the same problem.  I think the IOS 8.0.2 update broke it.  Here's a work around:
    1. Select Steps (or whatever you are trying to measure)
    2. Select Share Date
    3. Select Edit (on the top right corner)
    4. Look at the data sources list - there should be two: the iPhone itself and Health.
    5. Move the iPhone above Health so that it is a higher priority than Health.
    6. Repeat for anything else that is not working.
    After I did that it starting showing the correct number of steps.
    Hope this helps!
    iPhone 5S, iOS 8.0.2

  • Health app not recognizing manual inputs

    Hi,
    I've been using the Health app on my iPhone to track the number of steps I take each day (trying to do a minimum 10,000 per day as recommended by health professionals).
    This morning I didn't take my phone with me when walking the dog, so manually entered an estimate of the number steps.  Once I click on OK, it updated the number of steps.
    Later this morning, I noticed that the manually added steps are no longer being added to the total steps.  Checked that the data entry point was there and it was.  Deleted the data, and re-added it but made no difference - still not included.  I even turned the iPhone off and back on to see if that would make a difference.
    Why is the Health app now acting this way?  I've added manual data in the past and it's been OK.
    Buff 

    Thanks for the feedback.  I'll give the decimal thingy a try, although I'm not sure why that might work (a fraction of a step???).  I'm just trying to find out if others are experiencing this weird issue with the Steps data set.  The manual entries continue to remain in the data set after entry, they just stop being incorporated into the displayed totals/graph.
    I also note that it takes a full minute, or so, for all the data in the set to be displayed when you want to edit it.  I discovered this when I saw that my manual entry wasn't being included in the totals graph and wanted to check if my entry was still there.  It was.  So, I then deleted it and re-entered the amount with a different entry time.  That sometime worked and sometime not.  I just didn't want to leave the old non-included entry in the data set, once I got a new entry that worked.
    It's nice to know the issue isn't only affecting me.  Maybe Apple will now take a look and see what's the matter.

  • HT5429 maps on iphone 5 do not display anything

    Hi everyone. I recently bought a new iPhone 5 and I have a serious problem with my maps app. It does not display anything I search except the grid lines and pins. please help how can I fix it.  pls send the instructions at [email protected] Thank you in advance.

    It is not a good idea to put any kind of personal contact information in such a public forum.
    First, close the maps app. Double click the home button.  At the bottom, press and hold any app until a red circle appears on the top of each.  Tap the red circle on the Maps app.  Next, reset the phone:  press and hold the power and home buttons at the same time until the Apple logo appears.  Ignore the red slider if it appears.

  • HT203037 Health app not retaining Add Steps data

    I'm looking forward to using the Apple Watch to track my activity when I get it.  In the meantime, I've been manually entering my step activity in the Health app manually.  Unfortunately, more often than not, even if it seems to initially accept the Add Data entry, after a few hours it usually stops including the manual entry in the total displayed for the day, even though pouring back through the data shows the manual entry is still there.
    I've tried deleting the manual entry and re-entering it with a different time to see if that matters, but it generally doesn't help.  It's unreliable enough for me to forego manually adding data entries for my elliptical step data, for now.  Unless someone can explain/sleuth out the logic necessary for the data to be accepted as legitimate and incorporated into the daily step total.
    Any ideas?

    Thanks for the feedback.  I'll give the decimal thingy a try, although I'm not sure why that might work (a fraction of a step???).  I'm just trying to find out if others are experiencing this weird issue with the Steps data set.  The manual entries continue to remain in the data set after entry, they just stop being incorporated into the displayed totals/graph.
    I also note that it takes a full minute, or so, for all the data in the set to be displayed when you want to edit it.  I discovered this when I saw that my manual entry wasn't being included in the totals graph and wanted to check if my entry was still there.  It was.  So, I then deleted it and re-entered the amount with a different entry time.  That sometime worked and sometime not.  I just didn't want to leave the old non-included entry in the data set, once I got a new entry that worked.
    It's nice to know the issue isn't only affecting me.  Maybe Apple will now take a look and see what's the matter.

  • Health app not graphing data points.

    I have been playing around with the new Health app recently. I do not use any third party apps for Health, but I am running iOS 8.0.2 anyway. So far, I have plotted 4 points on the sleep monitor, for example. I can press Show All Data to see the individual sleep and wake times I inputted, but they are not showing up graphically as the data "Points" that I wanted to add. Instead, the graph (which I added to Dashboard) just says No Data.

    I have the identical problem with the Walking/Running Distance App in Health.  If I manually enter that I walked 1.75 miles it is 50/50 whether that shows up on the graph.  This makes the walking distance data useless if one doesn't want to wear the iPhone while walking.

  • Health app not showing heart rate data?

    The built-in Health app is not showing data from my heart rate monitor (HRM).
    I'm using a bluetooth 4.0 HRM (Wahoo Blue HR) on my iPhone 5S (iOS 8.3) The HRM shows as "Connected" in my Bluetooth settings and shows my heart rate within the Digifit and Wahoo Utility apps, so I know the HRM is working correctly. I've enabled Heart Rate Read/Write data for the Digifit and Nike+ Running apps within the Health app.
    The heart rate data never shows up in the Health app's Dashboard (or anywhere else in the Health app). Since it doesn't show up in the Dashboard, the data doesn't flow over to the Nike+ Running app, so my heart rate is blank there too. The Digifit app is set to write the heart rate data in the Health app, but that is not happening.
    How can I get the Health app to receive my HRM data?

    I take it you have already gone into the Health app and set up your Medical ID card, correct?
    The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
    It does not show up anywhere if you do not have a passcode lock on the screen.
    Cheers,
    GB

  • Health App not working (receiving/retaining/displaying) data.

    Hi,
    I am using MyFitnessPal and MapMyRun or Strava to send data to the Health App.
    The data was not going to the Health App when I looked.
    I found that when I did a hard reset yesterday the data appeared.
    It was gone in the morning however.
    After trying another hard reset the data has NOT re-appeared.
    Is my data lost?
    Is there a bug here?
    Has anyone else experienced this?
    Thanks.

    Hi I am using MyFitnessPal and Strava, I have noticed this very same problem, There is another thread looking into this, with a suggestion that a hard reset may correct it. In my experience that didn't work.
    From what I can tell the data , ie Steps , flight climbed is still logged and available as I have noticed mine coming and going over the past few days. (almost as things a written to Health App).
    I think it is going to require a software update to fix, either Apple or the App causing the problem.
    iPhone 6.0 , iOS 8

  • Health app not importing data

    I have the Health app connected to UP (for steps and sleep), Withings (for weight, BMI, heart rate) and Lose It! (for calories and other nutritional data). It is importing the steps from UP just fine, but it will not import anything else. It used to import sleep from UP, but that stopped on Oct. 8; it used to import weight, but that stopped on Oct. 22. It never imported anything from Lose It.
    I am running the newest iOS and the newest versions of all of these apps (including the new UP 4.0, released today, and others on UP's message boards report their issues have resolved with the update - not mine). All of them appear to be connected to Health - that is, under Sources they are all there and 'turned on,' and each of the individual apps' settings shows them as exporting to Health.
    Anyone have any fixes? Ideas?

    EdHDC,
    I'm sorry that I don't have a fix for your issue, but I did want to mention that if you end up in a scenario where you get things working and find that you have data prior to your fix that doesn't automatically get imported in, we have released an app specifically for importing data into HealthKit / Health App.  It requires data in a CSV (comma separated value) format currently, but that is the format that most apps provide for their exported files.
    The app is called Health Importer and more information is available on the App Store at:  https://itunes.apple.com/us/app/health-importer/id930943780?ls=1&mt=8
    Hope it's a helpful tool for you or others who come across the post!

  • Health app not reading from any other apps. iOS 8.1

    Using iPhone 6+ and iOS 8.1. I use MapMyRun, MyFitnessPal and Lark. Lark pulls activity from phone when I walk around with it in my pocket but I'm not going to run with the thing. I run with a Garmin Forerunner, log my workouts on MapMyRun and they show up fine on my iPhone app version but they don't push to the Health app. I have Health's source settings all "on" and allowing read and write permissions but there isn't any reading or writing happening. What gives?

    Hi Try a Reboot press and hold power button and menu button hold both down until you see Apple  Logo Also Sign out of itunes then Sign back in not Apps Store. Cheers Brian

Maybe you are looking for

  • SP Online - Managed Metadata column Default Value for folders (using CSOM)

    Hello, I am working on setting default values (metadata columns)  for different folders on my document library. As so far, I've found solution about how to set default values on whole library and many solutions which works for folders, but not for sh

  • Question mark instead of photo

    When I am browsing an internet forum on safari using my iPod touch, I often see a blue box with a white question mark in it instead of the photo that has been uploaded. Is there anything I can do to fix this? Any help is much appreciated. I'm using t

  • Change registered address of Skype Business accoun...

    I need to update the registered (postal, not email) address of my Skype Business account. The Skype Business control panel webpage says that to do this I must contact Customer Support. (Crazy, why??) The contact page only offers these Community forum

  • Unable to install BB Desktop SW

    I was trying to install the bb desktop sw from the weblink in my laptop and desktop. Unfortunately following error is displayed. I have win 7 in both the OS. Please help. Thank in advance.

  • Does match work with windows 8

    does match work with windows 8