IPhone 6 is not recognized by AT&T Microcell (older Cisco version)

I just discovered my new iPhone 6 is not connecting to my existing home AT&T Microcell.  This device worked just fine for the last three years with my old iPhones 4 & 5.  AT&T tech support had no immediate solution.  (The Voice-over-WiFi feature should resolve this issue at some point in the future, however.)

Hello Myschyveus,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone is not being recognized by iPhoto please follow the steps in the article below for your computer.
iOS: Device not recognized in iTunes for OS X
iOS: Device not recognized in iTunes for Windows
Take care,
Alex H.

Similar Messages

  • Final Cut Pro 7 not recognizing Sony HDV Deck on older 2008 version MacPro's

    I am trying to connect a Sony HDV deck to Final Cut Pro version 7 on an older 2008 version MacPro.  The problem was with the firewire mini port on the back i believe because i used a different deck which was the same model - but the only difference was it had a firewire 400 port instead of mini firewire port.  Anyway, the deck with the 400 firewire port worked for logging and capturing, etc... (this also worked when i re-tested it on the 2008 MacPro)  Im wondering if anyone else has had problems with the firewire mini port on the Sony HDV deck because it seems like almost every HDV deck i have with mini firewire has problems connecting to final cut pro or any editing application.  I know now that the deck i had in question the mini port is not working correctly but is there a way to fix this or prevent the cable - deck from terminating the connection with the mini cable being used.  I dont need an answer to the deck problem because i figured it out but just wondering if anyone has some insight on this deck problem.  Thank you...
    Kyle

    >I dont need an answer to the deck problem ... just wondering if anyone has some insight on this deck problem
    So you don't want an answer, just insight. OK, I'll give it a go.  I've had several Sony VTRs with the 4pin Firewire port (proper name for what you refer to as "mini"), which is the same type of port that most DV and HDV cameras use as well.  One of the main things you need to be wary of is plugging in and unplugging a Firewire cable while either the device or the computer is powered on.  I know that marketing hype claims that Firewire is hot swap-able, but it really isn't safe to do so.  The pins in both the 4 pin connector as well as the 6 pin connectors are very close together and if they aren't aligned exactly right with the socket, can easily cause arching and damage a Firewire port on either or both ends.  Is that the kind of insight you were looking for?
    -DH

  • IPhone 5 not recognized by iTunes 12

    Hello all,
    I have an iPhone 5, I'm running iTunes 12.0.1.26 and Yosemite (OS X 10.10.1). Over the last few days, I've noticed that my iPhone is not recognized by iTunes or even Yosemite itself. I have already tried everything in this doc: iOS: Device not recognized in iTunes for OS X - Apple Support, to no avail. I've been combing the communities and Google to no avail. Does this mean I need to try a manual restore on the phone? Any other solutions?
    Thanks
    Gina

    I was able to uninstall and reinstrall iTunes, but my Iphone does not appear in iTunes, nor in Windows Explorer on my Windows 7 desktop. But it does appear in both iTunes and Windows Explorer on my laptop which runs Windows 8... How can I get it reconginzed on my desktop?

  • TS1538 my iphone device not recognized in iTunes for my new Windows 8 computer

    my iphone device not recognized in iTunes for my new Windows 8 computer

    Hello kwesiaddai,
    I understand that your iPhone 5 is not recognized by iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • HT201302 iphone is not recognized as an accessible device by your windows 7 or 8 pc?

    Despite the fact that itunes has no problems accessing the iphone nor does a 3rd party paid app like "iExplorer", the iphone is not recognized as a device by Windows (7 and 8). The support bulletin referenced is inadequate.

    Hi James,
       I'll give you steps so it'll be easy to read.
    I suggest having your phone plugged into a working USB during this process.
      1. Open up your Device Manager (run/use command line devmgmt.msc or look for it by sliding open your charm bar located on the right of your computer screen, selecting PC Info, and then on the left hand side of your PC Info window, click "Device Manager"
    2. Once you are in your device manager, look at the above tab (It should say File, Action, View, and Help) and Click View. Click "Show Hidden Devices"
    3. Look for "Portable Devices", and click it. There should be something similar or exact to "Apple iPhone".
    4. Right click it, and select "Update Driver Software..."
    5. Click "Browse my computer for driver software"
    6. Click "Let me pick from a list of device drivers on my computer"
    7. Click "Show All Drivers", then click "Next"
    8. Click "Have Disk"
    9. Type in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    10. Click "Browse", there should be a file that says "usbaapl64" RIGHT click it and click "Install"
    11. From there it should install. Open iTunes to make sure.
    Please let me know if my directions are not clear enough, it took me some time to figure out what I was doing myself. I wish you the best!

  • TS1814 my iphone is not recognized by itunes as a device.  it is the 53 and has newest software installed.  what is the likely problem?

    my iphone is not recognized as a device on my itunes account.  It is a 5s with 7.0.4 system

    See this support document http://support.apple.com/kb/TS1538

  • My iphone is not recognized by itune software?

    My iphone is not recognized by itune software?

    Using Windows? Follow the directions here:
    http://support.apple.com/kb/ts1538

  • I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

    Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

    Hi Ken,
    Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
    I am looking at a product called wmobile, but may be problematic on my current system.
    thanks for any help...

  • Iphone 6 not recognized in windows

    iphone 6 not recognized in windows but it's recognized in Itunes. I uninstalled and reinstall Itunes but it's still not working. I have photos in my iphone. Apple Mobile Device USB Driver is updated. Under Device Manager and Portable Devices, I can't find Apple iPhone. Please advise.

    then uninstall bonjour and maybe use regedit to search and delete all registry keys
    and you can always connect it to another computer with a non messed up apple software and copy out the photos without having to pair or sync or anything with the computer

  • IPhone 5 not recognizing SIM card, I can't activate the phone.

    Hi, everybody.
    A couple of days ago, I bought an iPhone 5 from a friend. I have an iPhone 4 and, as you know, they both have different SIM card sizes (4 uses micro size and 5 uses nano size). When I got the iPhone 5, I restored it to factory settings, but couldn't activate it 'cause I didn't have the nano SIM card (or SIM nano card, anyhow it goes), so I just turned it off. Next morning, I went to my mobile carrier to buy a nano SIM card (they took like 28 hours long to activate it…anyway) but the iPhone is not recognizing it, so I cannot activate it.
    I've gotten stuck in the white "Hello" screen for like 3 days already and I'm running desperate 'cause I wanna use my stupid iPhone 5…
    Please, guys, any help?
    EDIT: It cannot be restored via iTunes 'cause I get a screen saying that there's no SIM card in the iPhone I'm attempting to activate. The friend who sold me the phone showed me a way to restore it on the phone itself, without having to send the command through iTunes 'cause he said that from iPhone 4S onwards all phones have to be restored with a SIM card inserted. Thing is, I tried this two or three times on the iPhone 5 but the device still doesn't recognize the stupid SIM…

    EDIT 2: It cannot be restored via iTunes 'cause I get a screen message saying that there's no SIM card in the iPhone I'm attempting to activate. The friend who sold me the phone showed me a method for restoring it on the phone itself, without having to send the command through iTunes (connect the phone to computer, turn it off, hold both Home and Power buttons until the Apple logo disappears, release the Power button without releasing Home button, iTunes shows a message about an iPhone in restoring mode, restore, etc.). Thing is, I tried this two or three times on the iPhone 5 but the device still doesn't recognize the stupid SIM…
    Please, help

  • My iphone is not recognizing my mac through bluetooth

    bluetooth is on and my mac recognizes my iphone but my iphone is not recognizing my mac. i want to send some pictures from my computer to my iphone through bluetooth. my other computer is my main computer for my iphone, and this one has some photos i want on it.
    YES MY COMPUTERS BLUTOOTH IS "DISCOVERABLE."

    At this time Bluetooth on iPhone does not support file transfer. Bluetooth on the iPhone as only for Bluetooth headsets at this time.
    If you feel this is a feature or suggestion that Apple needs to know about and or your interested in. Please go to http://www.apple.com/feedback/iphone.html

  • Downloaded the latest update and now my iphone is not recognized in itunes

    I downloaded the latest update on my computer for Itunes and now my Iphone is not recognized when I plug it into the computer or open Itunes>

    Device not detected in iTunes for Windows

Maybe you are looking for

  • TS4006 I have several iphones on  find my iphone. How do I know which one is the correct iphone. None of them are labeled Iphone4 or 5 etc.

    I just had my iphone stolen from me. In the past I have always set up my phones an ipads on to the find my iphone service. I have never deleted them from the find my iphone account and now I have 3 iphones showing and 2 ipads. How can you tell the di

  • IPhoto and Aperture won't open

    Dear all, Since a couple of days I've got a huge problem with iPhoto. Last weak it worked without any issues, but when I installed iDVD to help a friend to create a dvd..I guess iPhoto somehow crashed. I've tried to reinstall iPhoto but I constantly

  • Alarming bug in AIR SDK 4.0.0.1390, -useLegacyAOT no

    I've uploaded small testcase which does some simple testing of equivalence of fractions (by parsing Numbers, Strings, etc).  The testcase SWF passes when packaged without -useLegacyAOT no, but fails when using the new halfmoon compiler.  I've filed t

  • Ftp interface

    Hi everybody, I have four files to be downloaded from SAP and trnsfer to non SAP system. these four files has to be FTPed to non SAP system. in the functional specification port is also given as 22. for this do i need to first get the required fields

  • Schema upgrade

    Hello guys say that I took an export of a schema from database 10G and import it into a 11G database and now I would like to upgrade that schema, Can some one point me to the oracle docs that explains this process. When i google "oracle schema upgrad