Iphone 6 is using airtime and not any of my 488MB of data I have...?

My phone has been using my airtime for about two weeks now and not any of my data. I have 488MB on my phone but it has not changed at all. once my airtime runs out everything obviously gives errors saying cannot load.

Your question and description is not very clear to me, so hopefully something here will help:
1. Gmail is a service not an app or a place. So you need to access the service with an app - that can be iPhoto, Mail, Outlook or any other mail client, or even a Web Browser like Safari or Firefox.
So you can't "go to GMail" as you write, but instead you go to an application set up to use the GMail service.
2. iPhoto is not a mail client. It's a handy way to email pics to Grandma, but for what you're doing you need to use an app that supports all of the Gmail service. iPhoto doesn't. There is no way around that.
3. How to send to groups will vary depending on what app you use to access the GMail service. All of these apps can receive photos from iPhoto, either - as in the case of Mail and Outlook, via the Share function - or, in the case of all the rest - via a Media Browser.
For help sending to Groups using any of these other apps you need to ask omn their respective forums. But the workflow is quite simple:
Using Mail or Outlook set in the iPhoto Prefereneces:
1. Select the pic(s) you want to share.
2. Choose email from the Share function
3. Make your selections re size etc
4. The email opens up in Mail or Outlook
- from there you need to figure out how to use the email client.
Using any other app:
1. In the mail app create a new email
2. Click on the Attach button or link
3. Use the Media browser to select the pic(s) you want to send
4. Attach them
- from there you need to figure out how to use the email client.
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

Similar Messages

  • Is there a way to do a spelling quiz in captivate using images and not questions as reference.

    Is there a way to do a spelling quiz in captivate using images and not questions as reference. Specifically i want have blank lines underneath an image, where the user looks at the image and types the correct letters to fill in the blank. For example a picture of a dog, with this _ _ _ underneath for the user to fill in, or in some cases perhaps having them fill in the vowel like so "d_g".I must have audio with this , as the students will be able to listen to the audio sound out the word phonetially to help them be able to type it!
    Appreciate any advice! Cheers!

    Hello everybody!
    This widget is great!! Thank you for that!!
    I searched for something like that earlier and made an other workaround:
    http://forums.adobe.com/message/1912430#1912430
    The Javascript did not work in my test. I brought to the "if you reach this slide" feature but it failed.
    Regards,
    Markus

  • I have got an IPhone 5. It has been locking itself  and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any suggestion ?

    I have got an IPhone 5. It has been locking itself  and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any recomandation ?

    Sorry, but the warranty for the phone is only valid in the country where you bought the device, and you can't send it in, Apple does not ship internationally.
    Has the phone been officially unlocked? Only the carrier can unlock an iPhone.
    iPhone: About unlocking

  • I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

    I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

    Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new.  If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

  • When i scyn photo from pc to iphone, by using cable and selecting iphone on ituens,the photo which stored in my ipone, i am unable to delete some photoand even can not arrange them according to my wish

    when I scyn photo from pc to iphone , by using cable and selecting iphone on itunes, the photo which stored in my iphone , i am unable to delete some photo from them and even can not arrange them accoring to my wish, please let me know what to do ?

    you can only delete the photos you take on the phone itself as in from camera roll
    sync mean syncronize as in make the 2 side the same if you could delete the photos syncronized to your iphone then the nature of what syncronize mean result in the logic step being deleting the photo on your computer too
    you get rid of the photo by sync with another dir/ sourse or by moving the photo out of the dir of the computer and then resync

  • HT201413 iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    Mikey, I have the exact same problem. Dropped my 3gs on Thanksgiving, phone was not responsive, plugged into the wall charger, went to grey iPhone restore screen, then said to connect to itunes. So I plugged it into itunes but itunes wont recognize it nor will my computer. I searched the internet for hours with no success. I tried to change USB ports and cords, tired removing the SIM card, reinstalled itunes, everything. When I put it in DFU mode itunes recognizes an iphone in recovery mode, so I click restore and update, then I get error 1602 every time. My iPhone also loses power when I unplug it from the wall. I do not know what to try next. You are the only person I have found with the same exact problem I have. I will update you if I find a way to get my phone working again and I hope you will do the same. I'm very frustrated

  • Hi All, I'm using an Iphone 4. Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes Home button   power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugg

    Hi All,
    I'm using an iphone 4.Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes +Home button +  power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugguest.
    my os version: 4.2
    Firmware: 02.10.04

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • My MacBook is plugged in with a green light and shows it's plugged in, but is not charging.  When it's unplugged, it dies.  It was charging last time I used it but not any more.  I am no computer whiz and need detailed info on what to do  Thanks.

    My MacBook is plugged in with a green light and shows it's plugged in, but is not charging.  When it's unplugged, it dies.  It was charging last time I used it but not any more.  I am no computer whiz and need detailed info on what to do  Thanks.

    The model 2,1 MacBook has an easily removable battery. You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
    Removing the battery:
    Shut down the computer. Disconnect any cords connected to the computer.
    Turn the computer over.
    Locate the battery latch on one side of the battery.
    Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
    Lift the battery out.
    Installing the battery:
    Place the right side of the battery into the battery compartment at an angle, as shown below.
    Gently press the left side of the battery down until it sits flat.
    While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.
    Note: Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer.

  • After an initial sync my iphone phots are gone and not on the computer, can i retrieve them?, After an initial sync my iphone phots are gone and not on the computer, can i retrieve them?

    After an initial sync my iphone phots are gone and not on the computer, can i retrieve them?, After an initial sync my iphone phots are gone and not on the computer, can i retrieve them?

    Is this is a new iPhone that had never been synced with iTunes on any computer - the first time this iPhone was connected to iTunes on this computer which has been used to sync with another iPhone or iOS device?
    The first time a new iPhone is connected to iTunes on a computer that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device, or set up the iPhone as a new iPhone.
    If you choose the former, the Camera Roll on the new iPhone is replaced with the Camera Roll contents included with the backup for the other iPhone or iOS device.
    Syncing with iTunes alone does not touch the iPhone's Camera Roll.

  • IPhone 4s keeps freezing and not connecting to wifi. Keeps turning it off?

    IPhone 4s keeps freezing and not connecting to wifi. Been like this for last 6 months.. Am real fed up with it.. Have reset, tried turning off but still not connecting.. Any suggestions gratefully received.

    Does "have reset" mean that you restored the phone to factory settings? If not, you might want to give that a try. You will want to backup first so that you can restore your data from the backup after you restore the iOS software.
    This will erase the phone and also download and install the most recent iOS version available for your device.
    Use iTunes to restore your iOS device to factory settings

  • I upgraded my Iphone 4 to os7 and not all of my application icons are visible.  They can be found by searching.  How do I put them back on my desk top?

    I upgraded my Iphone 4 to os7 and not all of my application icons are visible.  I can locate them using the search feature but I would like to have the icons visible on my screen for imediate access. So how do I do this?

    They got pushed to another page of the Home screen. Scroll from left to right to find them. You can then move them to where you want them.

  • Modify Transition element in work flow using for and not attributes to restrict access

    Hi,
    I have TFS 2013 for my premises and I am working on changing the work flow for TFS work item. I have created a work item as per requirement and it has 3 states
    Active, In Review and Closed in work flow. When developer creates a work item it is in Active state and later it is sent to In Review and then to close after successful review.
    My question is I want development team to be restricted to move the work item to Close state. At present when developer creates a new work item they see Active state. At this point they can not see any other states in the work item. Later they
    fill the details and after checkin they will put that work item to In Review state. At this point they can see Active and In Review states. When they save this work item and modify it again they see Close state as well. I want to design the Transition element
    in work flow in such a way then developers should not be able to see the Close state at all in a work item assigned to them. Only reviewer should be able to transit the work item from In Review to Close.
    I checked the for and not attributes in the transition element but I have no idea about correct syntax I should use to enforce the restriction. I would also like to mention here that I have no separate groups defined in my TFS server. Every
    one is a part of contributor's group. There is no specific group of reviewers and one developer reviews the code of another. I want to design the work flow in such a way that the developer who creates (or gets assigned) the work item should
    not be able to put their own work item in Close state but they should be able to close another developer's work item if that work item has his name in the reviewer's box.
    I have tried to simplify my question by elaborating it hope it is not complex to understand. Let me know if you want further clarification on this.
    Regards, Premal Acharya

    Hi Premal,
    For your scenario, seems the "for" and "not" attributes not are unavailable to make it happens. Because of the developers not in groups, and the same type of work items can be assigned to all the developers hence the attributes cannot
    be allow and deny users in the groups concurrently. Please check the
    page for more information about transition xml element.
    Based on your situation, you can separate the development group and test group. Then you can only allow test group to change the state.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT5781 why does my iPhone 4 ping constantly and not connect to my macbook air

    why does my iPhone 4 ping constantly and not connect to my macbook air in itunes

    Hi, pinkshaz. 
    You may find this article helpful when troubleshooting iTunes not recognizing your iPhone.  If you have any security software, disable this software and test the results.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Cheers,
    Jason H.

  • How can i transfer msgs from iphone 4s using ios6 to iphone 5 using ios7 without removing any thing from iphone5?

    how can i transfer msgs from iphone 4s using ios6 to iphone 5 using ios7 without removing any thing from iphone5?

    Thanks for the response -I thought that may be the case. I can access all the tracks in iTunes as it's part of the iTunes Match library. Is there not a way to download the tracks that are currently on the iPhone to the MacBook? I'm not trying to transfer the purchases but download the content from the cloud.
    Have I explained myself at all well?!

  • I have created an iPhone app using xCode and am now ready to publish it. Do I have to sign up to the $99/yr program in order to get a certificate?

    I have created an iPhone app using xCode and am now ready to publish it. Do I have to sign up to the $99/yr program in order to get a certificate? I keep getting the error message: CodeSign Error: code signing is required...although the app tests fine on the simulator. Does this mean that I need to pay the $99 to create the app or do you only need to pay if you want it published on iTunes?
    Any advice will be gratefully received.

    App Store Resource Center - Apple Developer

Maybe you are looking for

  • How can I make google search links open in the same tab in mobile safari?

    I have iphone 5 with ios 7.0.4 and my wife has the same one. In my iphone, when I open one link of the google search result page, mobile safari always lauch a new tab and load the linke into the new tab. But I want to make it open in the same tab and

  • Which Mac Mini for word processing?

    Hello, my partner is looking to buy a computer to use exclusively for word processing.  Since she literally only wants to use a word processor – probably either MS Word or Nisus Writer – and nothing else (not even the internet), I suggested she might

  • RMI application policy problem..

    Hi; Because i am very new in eclipse and java i will ask you an easy question which is realy hard to find out for me. I created an RMI project in eclipse and i put the codes inside. When i am trying to run it is says Security Manager loaded Exception

  • Starting SOA server using proxy fails with exception

    Hi, The problem is as mentioned in the subjet. In console-servers-soa server - server start - arguments , I have entered -Dhttp.proxyHost=XX.XX.140.2 -Dhttp.proxyPort=80 When i try to start the server, I get this in the log: Listen Address server1:80

  • Client Dies after waking from sleep mode

    On a few machines that have the sleep mode enabled seem to drop connections to the Weblogic server when they wake up. This happens if our Java application is running on the machine without any activity for a while and it goes to sleep. All of the oth