IPhone 6 - keyboard freezes in landscape

I searched and found lots of old keyboard talk, but nothing answering this.
Upgraded to iPhone 6. The keyboard works perfectly when holding the phone in normal use position (portrait).  But when I rotate the phone to lanscape position, it usually just freezes. Keyboard appears but nothing happens when you press keys. Rotate back to portrait, works fine.  Every once in a while, but rarely, the keyboard will work in landscape.  I've tried installing two third party keyboards, same issue with them.  I've tried hard reset, no fix. It did this with original software and continues after 8.0.2 install.
I haven't seen anyone else talk about this problem. Is it just me?  Anyone have ideas on a fix?
RIck

Do you have a specific app that might cause it to go funny, try un-syncing apps then see if it sires it, if it does bring them back one by one. i had a similar issue with an app that caused screen to lock out.

Similar Messages

  • Iphone keyboard freezes

    I just downloaded 7.0.2 , and now my keyboard keeps freezing on my iphone 5. Suggestions?

    The same thing happens on my iphone 4...

  • Mail and Messages freeze in landscape/portrait mode

    When in Messages and Mail, my iPhone 5 freezes in landscape or portrait mode.  I can continue to type, edit, etc. but can only get it to rotate after pressing 'Home' button or closing and re-opening app.  I am running 8.0.2.  I notice it most when taking a break for Mail or Messages and turning phone off and when I turn back on.  I'm guessing it is a bug and not a hardware problem because I can always get it to clear by just pressing home or closing app.

    Hello there, HoosierZach1979.
    Great job in coming up with a good workaround for your issue with Mail and Messages. For issues regarding iOS not functioning as expected, the following Knowledge Base article provides a great and practical list of steps for troubleshooting:
    iOS: Not responding or does not turn on
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected,  restart your device.
    If the device remains unresponsive or does not turn on (or power on),  reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPhone keyboard in Landscape Mode

    Hey,
    Is any one else having the same issue ? Any solution is appreciated. When I use my iPhone keyboard in landscape mode (application - gmail) some of the letters in the keyboard don't pop-up. The keyboard inputs the letters in the mail however the on-screen prompt for a key being pressed (letters jumping up) does not happen. It happens for different letters each time. I have seen 'q' key do that .... r some times etc. It is not just the first row of letters too. I have seen other letters.
    I reset the phone, restored it and even got a warranty exchange. I still have this issue. Any ideas ?
    Peace...

    Link below is the official Gmail Mobile Development Blog. So you may find some contact or feedback info there.
    http://gmailblog.blogspot.com/2008/01/new-gmail-for-iphone.html

  • Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the n

    Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

    Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

  • Iphone 6 keyboard freezes when horizontal

    this happens randomly, I have Iphone 6 with ios8.1, keyboard freezes when phone is horizontal.  Has been this way ever since getting the phone, started on ios 8.01.

    Do you have a specific app that might cause it to go funny, try un-syncing apps then see if it sires it, if it does bring them back one by one. i had a similar issue with an app that caused screen to lock out.

  • IPhone 6 plus keyboard locked in landscape mode

    When i tried to search song in music app in Portrait mode , keyboard is in landscape mode and its not coming back to portrait mode as the screen in portrait mode.
    I have observed three more issues :
    1. Wify issue . its dropping the network information
    2.Orientation issue
    3.landscape keyboard crashes if we use '< '& '>' keys if any text is selected for copy
    please check and update me for this poor apple fan

    settings>general>message>raise to listen=off!
    and it will work

  • IOS 8.3 keyboard freezes - iPhone 6

    Has anyone else experienced the keyboard freezing after using an emoji on the new iOS 8.3? It freezes on the emoji keyboard, showing "emoji added", and I can't get back to the alpha/numeric keyboard to type text.  I touch the globe (and everything else) but nothing happens.

    There have been posts like yours after every update since iOS 1.0.1, 2007.  The problem is corrupted data or settings during the update.  Downgrading, even if supported, wouldn't help at all.
    Assuming the phone was never hacked/jailbroken (the most common cause of your issues), try these steps as needed:
    Reset phone (no data loss): press both the home and lock buttons for at least 10 seconds, releasing when the Apple logo appears
    Settings > General > Reset > Reset All Settings
    Restore to factory settings using iTunes, also restoring a backup
    Restore to factory settings as new (no backup restored)
    Use iTunes to restore your iOS device to factory settings

  • Keyboard freezes in email!

    this is my replacement phone I replaced my first phone due to incredibly low volume! The phone volume seemed alittle better for about ten hours then got just as bad! But now, on this phone, I have a keyboard problem! When I'm using mail, it freezes numerouse times while I'm typing! Its like it has to catch up and I'm definatly no speed types yet in iphones keyboard, athough I am getting better as the days go on! Anyone else with freezing keyboard?

    Have any of you noticed this correlation, keyboard freezes frequently under these circumstances:
    1. You are replying to an e-mail thread that is very long. i.e. you have exchanged several e-mails with the same person and the trail has gotten long (say, over a page).
    or
    2. You are replying to a message with alot of HTML graphics in it. i.e. you're replying to an e-mail sent by someone from E-bay, that has all the pictures, and logos in it.
    I'm getting a high correlation between stalling and one of these circumstances.
    Anybody else?

  • My iphone 4s freezes (hangs)

    My iphone 4s freezes (hangs) during calls with the time still counting and takes some minutes to restore or I turn it off.

    Hi Maor_k007,
    This article has some steps you can try for camera app issues:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Cheers,
    - Ari

  • C6 no full on-screen keyboard when in landscape mo...

    Is there a way to enable the on-screen full layout keyboard when in landscape mode?

    Go ahead, get Swype from Nokia Lab.
    Google.

  • How can I stop my iPhone from freezing?

    My friends iPhone keeps freezing, is there a way of preventing this form happening?

    If a reset doesn't help, try these steps as needed, as described in the User Guide, Appendix B:
    1. Settings > General > Reset > Reset All Settings
    2. Restore phone in iTunes using a backup
    3. Restore phone in iTunes as new, without using a backup.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    If restoring as new doesn't help, there is a hardware problem in the phone.

  • [SOLVED] Laptop keyboard freezes randomly.

    I have Arch dual booted with Windows 8.1 on an Asus K53SM laptop.
    Laptop specs are:
    * Intel i5 2nd Gen @ 2.5 GHz
    * 8GB RAM
    * 750 GB Hard disk
    * nvidia GT630M 2GB
    Right after installing Arch, I installed GNOME as the DE and everything was working fine. Recently, I uninstalled GNOME and installed KDE. I'm experiencing random keyboard freezes. I've tested it with a USB keyboard, so it is not a hardware issue I guess.
    * The [<Super> + S] combination to display all workspaces works fine.
    * So does the <Alt> + F2, to write commands, but the keys don't work (so can't type anything there).
    These freezes are totally random, and the keyboard works fine after 1-2 minutes. Here is the output for Xorg.0.log ->
    [ 21.228]
    X.Org X Server 1.16.4
    Release Date: 2014-12-20
    [ 21.228] X Protocol Version 11, Revision 0
    [ 21.228] Build Operating System: Linux 3.17.6-1-ARCH x86_64
    [ 21.228] Current Operating System: Linux ape 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
    [ 21.228] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=92ae3f1c-0f63-4de9-9323-487d50c0bd60 rw quiet splash usbcore.old_scheme_first=1
    [ 21.228] Build Date: 11 February 2015 08:10:00AM
    [ 21.228]
    [ 21.228] Current version of pixman: 0.32.6
    [ 21.228] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 21.228] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21.228] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 15 20:18:09 2015
    [ 21.333] (==) Using config file: "/etc/X11/xorg.conf"
    [ 21.333] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 21.440] (==) ServerLayout "X.org Configured"
    [ 21.440] (**) |-->Screen "Screen0" (0)
    [ 21.440] (**) | |-->Monitor "Monitor0"
    [ 21.456] (**) | |-->Device "Card0"
    [ 21.456] (**) |-->Screen "Screen1" (1)
    [ 21.456] (**) | |-->Monitor "Monitor1"
    [ 21.456] (**) | |-->Device "Card1"
    [ 21.456] (**) |-->Input Device "Mouse0"
    [ 21.456] (**) |-->Input Device "Keyboard0"
    [ 21.456] (==) Automatically adding devices
    [ 21.456] (==) Automatically enabling devices
    [ 21.456] (==) Automatically adding GPU devices
    [ 21.679] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 21.679] Entry deleted from font path.
    [ 21.679] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 21.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21.718] Entry deleted from font path.
    [ 21.718] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21.728] Entry deleted from font path.
    [ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 21.728] Entry deleted from font path.
    [ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21.728] Entry deleted from font path.
    [ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21.728] Entry deleted from font path.
    [ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21.728] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 21.728] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 21.728] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 21.728] (WW) Disabling Mouse0
    [ 21.728] (WW) Disabling Keyboard0
    [ 21.739] (II) Loader magic: 0x819d80
    [ 21.739] (II) Module ABI versions:
    [ 21.739] X.Org ANSI C Emulation: 0.4
    [ 21.739] X.Org Video Driver: 18.0
    [ 21.739] X.Org XInput driver : 21.0
    [ 21.739] X.Org Server Extension : 8.0
    [ 21.742] (EE) systemd-logind: failed to get session: PID 301 does not belong to any known session
    [ 21.743] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 21.745] (--) PCI:*(0:0:2:0) 8086:0126:1043:212e rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
    [ 21.746] (--) PCI: (0:1:0:0) 10de:0de9:1043:212e rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 21.746] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 21.763] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.763] (II) LoadModule: "glx"
    [ 21.856] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.220] (II) Module glx: vendor="X.Org Foundation"
    [ 22.220] compiled for 1.16.4, module version = 1.0.0
    [ 22.220] ABI class: X.Org Server Extension, version 8.0
    [ 22.220] (==) AIGLX enabled
    [ 22.220] (II) LoadModule: "intel"
    [ 22.220] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 22.286] (II) Module intel: vendor="X.Org Foundation"
    [ 22.286] compiled for 1.16.3, module version = 2.99.917
    [ 22.286] Module class: X.Org Video Driver
    [ 22.286] ABI class: X.Org Video Driver, version 18.0
    [ 22.286] (II) LoadModule: "nvidia"
    [ 22.286] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 22.367] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 22.367] compiled for 4.0.2, module version = 1.0.0
    [ 22.367] Module class: X.Org Video Driver
    [ 22.374] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 22.375] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 22.375] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 22.375] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 22.375] (II) NVIDIA dlloader X Driver 346.35 Sat Jan 10 20:32:18 PST 2015
    [ 22.375] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 22.386] (++) using VT number 7
    [ 22.429] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
    [ 22.483] (II) Loading sub module "fb"
    [ 22.483] (II) LoadModule: "fb"
    [ 22.483] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 22.502] (II) Module fb: vendor="X.Org Foundation"
    [ 22.502] compiled for 1.16.4, module version = 1.0.0
    [ 22.502] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 22.502] (II) Loading sub module "wfb"
    [ 22.502] (II) LoadModule: "wfb"
    [ 22.502] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 22.510] (II) Module wfb: vendor="X.Org Foundation"
    [ 22.511] compiled for 1.16.4, module version = 1.0.0
    [ 22.511] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 22.511] (II) Loading sub module "ramdac"
    [ 22.511] (II) LoadModule: "ramdac"
    [ 22.511] (II) Module "ramdac" already built-in
    [ 22.704] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
    [ 22.704] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 22.704] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 22.704] (==) intel(0): RGB weight 888
    [ 22.704] (==) intel(0): Default visual is TrueColor
    [ 22.705] (II) intel(0): Output LVDS1 using monitor section Monitor0
    [ 22.705] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
    [ 22.705] (II) intel(0): Enabled output LVDS1
    [ 22.705] (II) intel(0): Output VGA1 has no monitor section
    [ 22.705] (II) intel(0): Enabled output VGA1
    [ 22.705] (II) intel(0): Output HDMI1 has no monitor section
    [ 22.705] (II) intel(0): Enabled output HDMI1
    [ 22.705] (II) intel(0): Output DP1 has no monitor section
    [ 22.705] (II) intel(0): Enabled output DP1
    [ 22.705] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
    [ 22.706] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 22.706] (II) intel(0): Enabled output VIRTUAL1
    [ 22.706] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
    [ 22.706] (==) intel(0): TearFree disabled
    [ 22.706] (==) intel(0): DPI set to (96, 96)
    [ 22.706] (II) Loading sub module "dri2"
    [ 22.706] (II) LoadModule: "dri2"
    [ 22.706] (II) Module "dri2" already built-in
    [ 22.706] (II) Loading sub module "present"
    [ 22.706] (II) LoadModule: "present"
    [ 22.706] (II) Module "present" already built-in
    [ 22.706] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
    [ 22.706] (==) NVIDIA(1): RGB weight 888
    [ 22.706] (==) NVIDIA(1): Default visual is TrueColor
    [ 22.706] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
    [ 22.740] (**) NVIDIA(1): Enabling 2D acceleration
    [ 22.740] (EE) NVIDIA(1): Failed to initialize the GLX module; please check in your X
    [ 22.740] (EE) NVIDIA(1): log file that the GLX module has been loaded in your X
    [ 22.740] (EE) NVIDIA(1): server, and that the module is the NVIDIA GLX module. If
    [ 22.740] (EE) NVIDIA(1): you continue to encounter problems, Please try
    [ 22.740] (EE) NVIDIA(1): reinstalling the NVIDIA driver.
    [ 24.454] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24.455] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 24.456] (II) NVIDIA(1): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 24.456] (--) NVIDIA(1): Memory: 2097152 kBytes
    [ 24.456] (--) NVIDIA(1): VideoBIOS: 70.08.92.00.fa
    [ 24.456] (II) NVIDIA(1): Detected PCI Express Link width: 16X
    [ 24.461] (--) NVIDIA(1): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 24.461] (--) NVIDIA(1): CRT-0 (boot, connected)
    [ 24.461] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 24.461] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 24.461] (**) NVIDIA(1): device CRT-0 (Using EDID frequencies has been enabled on
    [ 24.461] (**) NVIDIA(1): all display devices.)
    [ 24.463] (==) NVIDIA(1):
    [ 24.463] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
    [ 24.463] (==) NVIDIA(1): will be used as the requested mode.
    [ 24.463] (==) NVIDIA(1):
    [ 24.463] (II) NVIDIA(1): Validated MetaModes:
    [ 24.463] (II) NVIDIA(1): "CRT-0:nvidia-auto-select"
    [ 24.463] (II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
    [ 24.473] (WW) NVIDIA(1): CRT-0 does not have an EDID, or its EDID does not contain a
    [ 24.473] (WW) NVIDIA(1): maximum image size; cannot compute DPI from CRT-0's EDID.
    [ 24.473] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
    [ 24.473] (--) Depth 24 pixmap format is 32 bpp
    [ 24.515] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
    [ 24.515] (==) intel(0): Backing store enabled
    [ 24.515] (==) intel(0): Silken mouse enabled
    [ 24.516] (II) intel(0): HW Cursor enabled
    [ 24.516] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 24.524] (==) intel(0): DPMS enabled
    [ 24.525] (==) intel(0): display hotplug detection enabled
    [ 24.525] (II) intel(0): [DRI2] Setup complete
    [ 24.525] (II) intel(0): [DRI2] DRI driver: i965
    [ 24.525] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 24.525] (II) intel(0): direct rendering: DRI2 enabled
    [ 24.525] (II) intel(0): hardware support for Present enabled
    [ 24.525] (--) RandR disabled
    [ 24.525] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 24.525] (II) NVIDIA: access.
    [ 24.529] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 24.529] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
    [ 24.529] (II) NVIDIA(1): configuration option may not be set correctly. When the
    [ 24.530] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
    [ 24.530] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
    [ 24.530] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
    [ 24.530] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 24.530] (II) NVIDIA(1): Config Options in the README.
    [ 24.536] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
    [ 24.649] (==) NVIDIA(1): Disabling shared memory pixmaps
    [ 24.649] (==) NVIDIA(1): Backing store enabled
    [ 24.649] (==) NVIDIA(1): Silken mouse enabled
    [ 24.649] (==) NVIDIA(1): DPMS enabled
    [ 24.663] (II) Loading sub module "dri2"
    [ 24.663] (II) LoadModule: "dri2"
    [ 24.663] (II) Module "dri2" already built-in
    [ 24.663] (II) NVIDIA(1): [DRI2] Setup complete
    [ 24.663] (II) NVIDIA(1): [DRI2] VDPAU driver: nvidia
    [ 24.663] (--) RandR disabled
    [ 24.872] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 24.872] (II) AIGLX: enabled GLX_ARB_create_context
    [ 24.872] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 24.872] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 24.872] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 24.872] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 24.872] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 24.872] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 24.872] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 24.872] (II) AIGLX: enabled GLX_ARB_create_context_robustness
    [ 24.872] (II) AIGLX: Loaded and initialized i965
    [ 24.872] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 24.873] (II) AIGLX: Screen 1 is not DRI2 capable
    [ 24.873] (EE) AIGLX: reverting to software rendering
    [ 25.619] (II) AIGLX: Loaded and initialized swrast
    [ 25.619] (II) GLX: Initialized DRISWRAST GL provider for screen 1
    [ 25.634] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 25.640] (II) intel(0): Setting screen physical size to 361 x 203
    [ 25.988] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 25.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 25.988] (II) LoadModule: "evdev"
    [ 25.988] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 26.030] (II) Module evdev: vendor="X.Org Foundation"
    [ 26.030] compiled for 1.16.2, module version = 2.9.1
    [ 26.030] Module class: X.Org XInput Driver
    [ 26.030] ABI class: X.Org XInput driver, version 21.0
    [ 26.030] (II) Using input driver 'evdev' for 'Power Button'
    [ 26.030] (**) Power Button: always reports core events
    [ 26.031] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 26.031] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 26.031] (--) evdev: Power Button: Found keys
    [ 26.031] (II) evdev: Power Button: Configuring as keyboard
    [ 26.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
    [ 26.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 26.031] (**) Option "xkb_rules" "evdev"
    [ 26.031] (**) Option "xkb_model" "pc104"
    [ 26.031] (**) Option "xkb_layout" "us"
    [ 26.086] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 26.086] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 26.086] (II) Using input driver 'evdev' for 'Video Bus'
    [ 26.086] (**) Video Bus: always reports core events
    [ 26.086] (**) evdev: Video Bus: Device: "/dev/input/event6"
    [ 26.086] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 26.086] (--) evdev: Video Bus: Found keys
    [ 26.086] (II) evdev: Video Bus: Configuring as keyboard
    [ 26.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event6"
    [ 26.086] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 26.086] (**) Option "xkb_rules" "evdev"
    [ 26.086] (**) Option "xkb_model" "pc104"
    [ 26.086] (**) Option "xkb_layout" "us"
    [ 26.087] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 26.087] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 26.087] (II) Using input driver 'evdev' for 'Video Bus'
    [ 26.087] (**) Video Bus: always reports core events
    [ 26.087] (**) evdev: Video Bus: Device: "/dev/input/event5"
    [ 26.087] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 26.087] (--) evdev: Video Bus: Found keys
    [ 26.087] (II) evdev: Video Bus: Configuring as keyboard
    [ 26.087] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input13/event5"
    [ 26.087] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 26.087] (**) Option "xkb_rules" "evdev"
    [ 26.088] (**) Option "xkb_model" "pc104"
    [ 26.088] (**) Option "xkb_layout" "us"
    [ 26.088] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 26.088] (II) No input driver specified, ignoring this device.
    [ 26.088] (II) This device may have been added with another device file.
    [ 26.089] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 26.089] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 26.089] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 26.089] (**) Sleep Button: always reports core events
    [ 26.089] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 26.089] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 26.089] (--) evdev: Sleep Button: Found keys
    [ 26.089] (II) evdev: Sleep Button: Configuring as keyboard
    [ 26.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
    [ 26.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 26.089] (**) Option "xkb_rules" "evdev"
    [ 26.089] (**) Option "xkb_model" "pc104"
    [ 26.089] (**) Option "xkb_layout" "us"
    [ 26.090] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 26.090] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 26.090] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
    [ 26.091] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event12)
    [ 26.091] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
    [ 26.091] (II) Using input driver 'evdev' for 'USB 2.0 UVC VGA WebCam'
    [ 26.091] (**) USB 2.0 UVC VGA WebCam: always reports core events
    [ 26.091] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event12"
    [ 26.091] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5710
    [ 26.091] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
    [ 26.091] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
    [ 26.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input19/event12"
    [ 26.091] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 10)
    [ 26.091] (**) Option "xkb_rules" "evdev"
    [ 26.091] (**) Option "xkb_model" "pc104"
    [ 26.091] (**) Option "xkb_layout" "us"
    [ 26.092] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
    [ 26.092] (II) No input driver specified, ignoring this device.
    [ 26.092] (II) This device may have been added with another device file.
    [ 26.093] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
    [ 26.093] (II) No input driver specified, ignoring this device.
    [ 26.093] (II) This device may have been added with another device file.
    [ 26.093] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
    [ 26.093] (II) No input driver specified, ignoring this device.
    [ 26.093] (II) This device may have been added with another device file.
    [ 26.094] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
    [ 26.094] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 26.094] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 26.094] (**) Logitech USB Optical Mouse: always reports core events
    [ 26.094] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event13"
    [ 26.094] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
    [ 26.094] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
    [ 26.094] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 26.094] (--) evdev: Logitech USB Optical Mouse: Found relative axes
    [ 26.094] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    [ 26.094] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    [ 26.094] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    [ 26.094] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 26.094] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 26.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046D:C05A.0001/input/input20/event13"
    [ 26.094] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
    [ 26.095] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    [ 26.095] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 26.096] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
    [ 26.096] (II) No input driver specified, ignoring this device.
    [ 26.096] (II) This device may have been added with another device file.
    [ 26.096] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
    [ 26.096] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 26.096] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
    [ 26.096] (**) Asus WMI hotkeys: always reports core events
    [ 26.096] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
    [ 26.096] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
    [ 26.096] (--) evdev: Asus WMI hotkeys: Found keys
    [ 26.096] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
    [ 26.096] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"
    [ 26.096] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
    [ 26.096] (**) Option "xkb_rules" "evdev"
    [ 26.096] (**) Option "xkb_model" "pc104"
    [ 26.096] (**) Option "xkb_layout" "us"
    [ 26.097] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 26.097] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 26.097] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 26.097] (**) AT Translated Set 2 keyboard: always reports core events
    [ 26.097] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 26.098] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 26.098] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 26.098] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 26.098] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 26.098] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 26.098] (**) Option "xkb_rules" "evdev"
    [ 26.098] (**) Option "xkb_model" "pc104"
    [ 26.098] (**) Option "xkb_layout" "us"
    [ 26.099] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
    [ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 26.099] (II) LoadModule: "synaptics"
    [ 26.099] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 26.109] (II) Module synaptics: vendor="X.Org Foundation"
    [ 26.109] compiled for 1.16.0, module version = 1.8.1
    [ 26.109] Module class: X.Org XInput Driver
    [ 26.109] ABI class: X.Org XInput driver, version 21.0
    [ 26.109] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 26.109] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 26.109] (**) Option "Device" "/dev/input/event7"
    [ 26.210] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762 (res 52)
    [ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902 (res 83)
    [ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 26.210] (**) Option "TapButton1" "1"
    [ 26.210] (**) Option "TapButton2" "2"
    [ 26.210] (**) Option "TapButton3" "3"
    [ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 26.210] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 26.263] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event7"
    [ 26.263] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
    [ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 26.264] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 26.264] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 26.265] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 26.265] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 26.265] (II) No input driver specified, ignoring this device.
    [ 26.265] (II) This device may have been added with another device file.
    [ 26.282] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    [ 26.282] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 26.282] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 26.282] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
    [ 81.255] (II) intel(0): EDID vendor "AUO", prod id 9964
    [ 81.255] (II) intel(0): Printing DDC gathered Modelines:
    [ 81.255] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
    [ 81.277] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 81.293] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 81.644] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 81.660] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 81.678] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 84.668] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 84.685] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 86.539] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2962.717] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2962.734] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2966.160] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2966.176] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 3045.352] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 3045.370] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 3066.487] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 3066.504] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4507.909] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4507.925] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4568.870] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4568.887] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4749.685] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4749.702] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4841.172] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 4841.189] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 5067.684] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 5067.701] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 5098.091] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 5098.108] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 5231.697] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 5231.715] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 7726.903] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 7726.920] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 7989.858] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 7989.875] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8118.003] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8118.020] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8525.573] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8525.590] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8645.496] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8645.513] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8787.791] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 8787.808] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10010.206] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10010.223] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10511.439] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10511.456] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10576.580] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10576.597] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10758.287] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 10758.304] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 12833.372] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 12833.389] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 14722.424] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 14722.441] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 15499.091] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 15499.108] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 16138.293] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 16138.309] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 16563.842] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 16563.858] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 17097.871] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 17097.888] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 17958.793] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 17958.810] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 18046.490] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 18046.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 18286.639] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 18286.655] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 18857.140] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 18857.157] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 19683.981] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 19683.997] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 19746.465] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 19746.483] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 19801.499] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 19801.516] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24516.593] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24516.610] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24714.424] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24714.440] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24733.954] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24733.970] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24794.748] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 24795.935] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 24795.935] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 24795.971] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
    [ 24796.039] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 24796.039] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
    [ 24796.039] (II) NVIDIA(1): configuration option may not be set correctly. When the
    [ 24796.039] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
    [ 24796.039] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
    [ 24796.039] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
    [ 24796.039] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 24796.040] (II) NVIDIA(1): Config Options in the README.
    [ 24796.057] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 24796.061] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 25764.817] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 25766.007] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 25766.007] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 25766.036] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
    [ 25766.104] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 25766.104] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
    [ 25766.104] (II) NVIDIA(1): configuration option may not be set correctly. When the
    [ 25766.104] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
    [ 25766.104] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
    [ 25766.104] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
    [ 25766.104] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 25766.104] (II) NVIDIA(1): Config Options in the README.
    [ 25766.122] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 25766.129] (EE) evdev: Logitech USB Optical Mouse: Unable to open evdev device "/dev/input/event13".
    [ 25766.129] [dix] couldn't enable device 11
    [ 25766.129] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 25766.132] (II) config/udev: removing device Logitech USB Optical Mouse
    [ 25766.132] (II) evdev: Logitech USB Optical Mouse: Close
    [ 25766.132] (II) UnloadModule: "evdev"
    [ 27662.047] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 27663.314] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 27663.314] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 27663.345] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
    [ 27663.413] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 27663.413] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
    [ 27663.413] (II) NVIDIA(1): configuration option may not be set correctly. When the
    [ 27663.413] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
    [ 27663.413] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
    [ 27663.413] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
    [ 27663.413] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 27663.413] (II) NVIDIA(1): Config Options in the README.
    [ 27663.431] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 27663.439] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 27694.770] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
    [ 27694.770] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 27694.770] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 27694.770] (**) Logitech USB Optical Mouse: always reports core events
    [ 27694.770] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event13"
    [ 27694.770] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
    [ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
    [ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found relative axes
    [ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    [ 27694.770] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    [ 27694.770] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    [ 27694.770] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 27694.770] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 27694.770] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046D:C05A.0002/input/input39/event13"
    [ 27694.770] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
    [ 27694.771] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    [ 27694.771] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 27694.771] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
    [ 27694.771] (II) No input driver specified, ignoring this device.
    [ 27694.771] (II) This device may have been added with another device file.
    [ 28826.102] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 28826.119] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 28869.273] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 28869.290] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 29665.856] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 29665.873] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 29759.751] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 29759.768] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 30246.231] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 30246.248] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 31539.152] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 31539.168] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 33130.297] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 33130.314] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 35115.805] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 35115.822] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 36739.995] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 36740.011] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37099.972] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37099.988] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37115.693] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37115.709] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37292.799] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37292.816] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37896.583] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 37896.600] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 40947.452] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 40947.469] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 40999.729] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 40999.746] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 41027.146] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 41027.163] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 41198.146] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 41198.162] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 41405.365] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 41405.382] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 43125.113] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 43125.128] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 43212.374] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 43212.391] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 44006.946] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 44008.163] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 44008.163] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 44008.193] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
    [ 44008.262] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 44008.262] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
    [ 44008.262] (II) NVIDIA(1): configuration option may not be set correctly. When the
    [ 44008.262] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
    [ 44008.262] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
    [ 44008.262] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
    [ 44008.262] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 44008.262] (II) NVIDIA(1): Config Options in the README.
    [ 44008.280] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 44008.287] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    Please help me to resolve this.
    Last edited by vortex_ape (2015-02-22 14:39:47)

    I haven't been experiencing the issue for some hours.
    The issue occurred more frequently when I was compiling something. When I tried to reproduce the issue, it didn't occur.
    The interesting thing to note is that I updated the system twice in the past 2 days. I checked the pacman log and saw that xorg-server-common, xorg-server, xorg-server-devel were among the upgraded packages. I guess they were causing the problem.
    I'll need to test for a couple of days though before I consider the issue to be resolved. I'll update if the issue persists.

  • Iphone keeps freezing when I am going to end a call.

    My Iphone sometimes freezes when I make phone calls on it. This only happens at the end of the phone call but it is really frustrating because I cannot hang up the call. I called my service provider and they told me it was because of the clear screen protecter I put on my phone. Could this be possible or are they just making this up to get me to quit complaining?

    Hello Jennings Castle,
    It seems your iPhone is slowing down and not responding frequently. To rectify this issue you may want to consider performing a restore on the device, and then restoring your data from a backup via iCloud or iTunes. 
    If the issue persists after restoring your backup, you would then want to consider restoring the device and setting it up as new. Below I have linked to article which offers guidance on both of these restore methods:
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    Thank you for contributing to Apple Support Communities.
    Best,
    BobbyD

  • My iPhone keeps freezing when I am streaming videos.  It never used to do that. How do I fix this.

    My iPhone keeps freezing when I am streaming videos. How do I fix this.

    Hello Jennings Castle,
    It seems your iPhone is slowing down and not responding frequently. To rectify this issue you may want to consider performing a restore on the device, and then restoring your data from a backup via iCloud or iTunes. 
    If the issue persists after restoring your backup, you would then want to consider restoring the device and setting it up as new. Below I have linked to article which offers guidance on both of these restore methods:
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    Thank you for contributing to Apple Support Communities.
    Best,
    BobbyD

Maybe you are looking for

  • Delete file from NOKIA C5-03 phone memory

    I still face a problem that when I buy mobile then phone memory was 40MB, but now it reduced to 30MB. I try to browse and remove unwanted file from phone memory. But nothing gonna happen.  I also use pc suite, mass storage etc, but can't. What can I

  • Blue Screen of Death When opening iTunes.

    I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open

  • Exporting to pdf with page marks and color separations

    Hi All., I have a requirement to export the current document as PDF file. I am using the export provider with the service registry to export the document as pdf file. The code works successfully. Now I have a requirement where I need to save the pdf

  • How to pass parameter to 1 method in adf 11g

    Hi, <af:panelAccordion id="id25" clientComponent="true" visible="true" inlineStyle="height:90%;"> MyBean.leftKey=list <af:iterator id="keyId" value="#{MyBean.leftKey}" var="bean"> <af:showDetailItem text="#{bean.text}" id="arraylistValues"> (bean.tex

  • Cannot Get podcasts and playlists to stop shuffling

    Every time i go to listen to my podcasts, it shuffles the list so i cannot hear them in the order they aired. When i create a playlist with my podcasts loaded in the order i want to listen to them in, when i start it randomizes the rest of the playli