Iphone 6 Plus audio jack -NO headphones fit! Diameter too small

i have checked everywhere but no one seems to share this issue. I have a new iPhone 6 Plus and NO pair of headphones fit!!! The Apple stock ones, bose, beats, etc. I appear to have the only one iphone that has this issue. I was expecting great service considering if I put this on YouTube I would get a bunch of hits. But instead I was put on hold while the operator was calling a nearby store and the call was dropped. Waited and no call back!
Please tell me I am not the only One?!

No, you don't pay for shipping the device back.  The only shipping charge is $29 USD + tax, and that's if you choose the Express Replacement option.  And that's to cover shipping a replacement device to you up front.
You have the option of shipping the device to Apple first, for free, either via UPS or Apple can send you an empty box.
Or you can go to an Apple Store.
The only time a shipping charge is involved is if you want Apple to send you a replacement first.  And you can ask for a Senior Advisor to waive that $29 shipping fee.  But you'll still have to put a hold on a credit card for the retail purchase price of the iPhone.
If Apple has offered to replace your device, then obviously they are concerned about the issue.

Similar Messages

  • Audio jack no longer fits

    I have a brookstone Weather-Resistant Indoor/Outdoor Wireless Speaker that has always connected to my iPhone 3Gs with no problems - I recently upgraded everything and all of the sudden the audio jack will not fit into the iPhone like it always has done before - it goes in but will not snap into place. There is nothing in the audio hole on the iPhone - is it even possible for a firmware update to cuase this problem?

    How could a firmware update conceivably change the size of the headset jack, (or any other aspect of the phone hardware)? Are you serious??
    Either there is debris in the jack you don't see, or the plug has become bent or corroded. Did you try plugging in something else like the iPhone headset? If that fits, the problem is with the speaker plug. If not, the problem is in the jack, and you should blow it out with canned air (never by mouth).

  • IPhone 3G S: Audio Jack

    I'm not sure where I can post this yet but does anyone know if the audio jack in the new iPhone 3G S be able to directly connect to an audio in line (ie: in a car) without having to get some converter like the old ones?

    I think the confusion here is the recessed connector in the original iPhone. You don't necessarily need the TTY adapter, just a specific adapter for the iPhone. I guess the TTY one already has the deeper plug built-in. To answer the question, though, this issue was fixed with the iPhone 3G, which got a flush headphone jack. One can safely assume it's the same in the 3G S.

  • IPhone - left channel audio only (speakers & headphones)

    I own an iPhone 3G. Audio only comes from the left channel in iTunes, apps etc. This is true whether there are headphones connected or not, which seems to suggest it's not simply a poor connection in the stereo jack.
    From what I read there's no software balance control but I wonder if this issue is common or resolvable. I'd love to fix this!
    Any suggestions? What can I do to fix it?
    Thanks in advance!

    The iPhone includes a single external speaker, but you should hear sound out of both earbuds when listening to music with headphones.
    If the same occurs with more than one set of earbuds or headphones, your iPhone probably has a hardware problem if the standard troubleshooting steps do not resolve this which in order are powering your iPhone off and on, an iPhone reset, restoring your iPhone with iTunes from your iPhone's backup, and restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after these troubleshooting steps and the same occurs with more than one set of earbuds or headphones, you can call AppleCare or make an appointment at an Apple store if there is one nearby.

  • Iphone 6 Plus audio sound is very low

    I am using 16 GB iphone 6 plus and i am facing audio problem.During phone call,sound is very low and i have to have on the speaker to listen audio properly.

    Hi ayush gaur,
    If you are having an issue with poor sound quality from your iPhone I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Cap3: Edit Audio Timing display's thumbnail is too small

    Hello ... Regarding Captivate 3 ...
    I'm trying to time my voice-over audio to a series of
    application scenario slides using the Edit Audio Timing display,
    but am finding it extremely difficult because the small changes in
    my slides (radio button selections, text input, dropmenu
    selections, etc.) are too small to detect on the miniscule
    thumbnail used in the display.
    Is this poor interface design, or is there a setting
    somewhere that allows me to increase the size of the thumbnail?
    I've looked around, but can't find one. How do you handle syncing
    audio to stretches of small screen changes?
    Regards, Myron

    Hi Myron
    I won't argue as to whether this is good, bad or indifferent
    interface design. But it is what it is and as far as I know it
    cannot be changed. At first I thought perhaps we might see a change
    if right-clicking the image and choosing "Zoom in". But all that
    does is zooms in on the waveform.
    This doesn't help any, but you may wish to make the
    development staff aware that you would like to see the behavior
    change in a future version. You may do this by
    clicking
    here and completing the form you should find there.
    Cheers... Rick

  • Headphone jack: normal headphones dont fit

    I tried to plug headphones in to my computer the other day, but ran into a problem: the headphone jack on the computer is too small for standard headphines! I dont understand this at all... I thought there was only one size of headphone jack. I tried two pair of headphones, both normal ones that fit into Iphones and everything else I have ever used them on. Are there special headphones for HP? When I googled this problem, I couldnt find anything.

    Hi @Cath676 .
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 11 x360 PC and issues with the Headphone or earbud not fitting. Your notebook supports a device cable that has a 4-conductor
    connector that supports audio-out.
    Your manual  page 12 shows the head-phone jack located in the middle of your volume control and usb port on the left side of the Notebook.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Charging iphone with audio jack?

    I just purchased a new vehicle, and the auxillary connection for media is an audio jack input. Does anyone know where I can get an adapter for the cord that comes with the iphone? Or possibly a cord with the apple male connection on one side and a male audio jack on the other?
    Thanks!!

    I'm alittle confused, mainly with the title. Are you looking to charge the iPhone through the audio jack from the car? If so there is no power and no way to charge it from there. The AUX jack in the car is for audio in only.
    There are cables that have the iPod dock end to plug into the iPhone, and then it splits to audio and USB jack for charging. You could then plug the USB end into a cigarette USB power jack from the car and the audio cables could plug into the AUX jack on the car. I would suggest trying a Best Buy or Future shop.

  • Iphone 4 - iphone 6 plus converter for audio

    where can i get iphone 4  - iphone 6 plus audio connector coverter

    i have solved the problem myself - went to dick smith and bought  the adaptor  - cost nearly $ 40 ,   problem fixed,  now, i can listen the music in the car from my iphone.

  • Faulty Audio Jack

    On my 3gS and my wifes iPhone 4 the audio jack seems to be faulty. They both only work in mono unless you pull the jack plug out slightly but the the sound quality drops off significantly. The headphones are fine elsewhere.
    The accessiblility setting has mono off.
    Any suggestions ?

    IMO, it's unlikely that both jacks failed. I know you said the headphones work fine elsewhere but I still suspect the headphones. Try a few other pair. If still a problem, the iP4 is still under warranty. Not sure about your 3GS.

  • Audio Jack of my HP Envy 4 is not working anymore

    Hi all,
                I have purchased HP Envy 4 just a 4 months ago and now something worong with its audio jack for headphone and its not working anymore. The hardware profile for this audio jack shows no error but its still not working. Is there anyone who can help me out this issue???
    Regards,
    This question was solved.
    View Solution.

    Lets start with you helping us by identifying your notebook completely.
    HP has produced and brought to market more than a thousand different models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which specific model you own..
    Method #1: If the notebook will boot into Windows, you can retrieve your Product Number by pressing Fn + Esc key.
    Method #2:
    Remove the battery and look in the compartment where the battery was installed. You should see a Service tag with printed part number and a product name. Please post the p/n (with all alphanumeric characters) here. If you live outside of North America, it helps us if you post the country of purchase. Also post the installed CPU type. (AMD or Intel)
    Don't forget to post the name of the installed operating system if you haven't already done that.
    If Windows 8 is installed, you can invoke the search charm and  type in the word audio and then on the right hand side of the screen click on Settings. On the left hand side of the screen, you should see an option to select Find and fix audio playback problems.  Try it to see if it resolves the issue for you.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Pavilion dv7 notebook, Windows 7: How do I disable an audio jack?

    My Pavilion dv7 notebook includes two audio jacks for headphones on its right side (my left when facing it.) Long story short, a hefty piece of an iPod headphone has dislodged and been stuck inside one of these two jacks; there's no way I'd be able to remove it without taking apart the notebook. I can still receive audio via headphones when I plug headphones into the other jack, but I can no longer receive audio from the internal speakers. 
    I'd like to diasble both headphone jacks manually when I'd like to hear the speakers --  but I can't figure out how. When I access my 'Speakers and Headphones Properties' (IDT High Definition Audio Codec, through Sounds --> Playback Devices) and attempt to disable the device, all sound is disabled. There appears to be no way to selectively disable either just the speakers or just the headphones. 
    Any ideas? 

    ...I'm still curious as to whether I can receive any assistance regarding this issue.

  • Audio Jack not working on iPhone 6 plus

    I  have had my Iphone for about 4 days now and just the other day I found out that my audio jack does not work. I plugged my headphones in and instead of the music playing through the headphones it just continues to play through my speakers. I have tried several different headphones and I have even tried plugging an AUX cord into it while I was in my car and still nothing. Has anyone else encountered this same issue and if so have you found a way to fix it? Or is this something that I need to fix by taking it to my local apple store?

    Given that it is practically out of the box, you should take it in and make it Apple's problem. They should fix it, replace it or refund you for a new one that works.

  • Audio jack on iphone

    Hello, the audio jack from my iphone was ripped out. Does anyone know how much it will cost to replace?

    Definitely not the headphones since (as you said) they fit fine into your 4S. The jack on the iPhone 5 is likely not mounted correctly on the PCB (or whatever it's actually mounted to). I would take it in to an Apple Store and have them compare yours to others on display there. If they all fit like yours, then that's probably by design and there likely is nothing you can do but accept it as it is.
    If the others on display are not like yours, then you likely have a defective unit which should be replaced by Apple.

  • Do audio jack sizes differ for iphone 3, iphone 4s ipad 2?

    Do audio jack sizes differ for iphone 3, iphone 4s ipad 2?

    No. They are all industry standard 3.5mm ones, that any headphones will fit into.

Maybe you are looking for

  • A problem with inserting into DB hebrew strings

    Hi, I am working with a 8.1.7 DB version, and use thin driver. I have my DB Charest configured to iso 8859P8 (which is visual Hebrew) I have no problem in making a connection and retrieving strings, using SELECT * FROM .. and then use the ResultSet.g

  • Movement types in valuated stock

    Hi experts, What are the Standard movement types considered by SAP for extraction of Valuated Stock ( Inventory data ) in MB5B on R/3 side. Full points will be assigned. Thanks & Regards, Naveen V.

  • Base amount is zero

    Dear all,. While c pturing invoice , Base amount is calculated as Zero. Tax is getting calculated in PO. Migo is not yet done. TAx procedure is TAXINN. pl help. Prabhash

  • Creating a new database using an MDF file

    My database saves as MDF. I want to know what are the steps to restore or create a new database using a MDF file? I tried to restore as usual but it shows an error. Please help.

  • Missing ejb-jar.xml

    Hello! i want to deploy an application on WebLogicServer 9.2 i have an EAR-File and a JAR-File by deploying the application with: java weblogic.Deployer -adminurl t3://HOST:PORT etc... i get a message that the ejb-jar.xml in the META-INF folder does