Iphone 6 Plus audio sound is very low

I am using 16 GB iphone 6 plus and i am facing audio problem.During phone call,sound is very low and i have to have on the speaker to listen audio properly.

Hi ayush gaur,
If you are having an issue with poor sound quality from your iPhone I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Iphone 5c call volume is very low. Any suggestions?

My iphone 5c call volume is very low. While on a call, I can barely hear the person on the other line. It sounds like they are at 25% volume when the volume shows it is at 100% volume. They can hear me fine. I have tried resetting/restoring several times, the call volume is all the way up, and have even tried messing with the accessibility-->hearing aid setting. The only way to get by it right now is to have it on speakerphone, which works fine. This happens with every person I have talked with, even landlines. Any help greatly appreciated.

Hello tjmzero,
The following article provides some useful troubleshooting steps that can help resolve issues with your receiver.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/TS5196
Cheers,
Allen

I have hp620 its sound is very low although the volume is full.what should i do?

i have hp620 its sound is very low although the volume is full.what should i do??
Please Help!!

There's a countless number of volumes on the iPhone.
The Main volume, On-Call volume, Music volume, Siri volume, Directions volume, etc. etc.
While On-Call with an individual or Voice Mail for example, make sure you're holding the up button to it's maximum.

I have just purchased my Iphone 4s, and the volume of the sound is very low, I can hardly hear the other person. I have tried the button for higher volume, but there is no change

I have just purcahsed my Iphone 4s, and the volume is very low, I can hardly hear the other person talk. I have tried the botton for higher volume, but it doesn`t work. Can anybody give me an answer to what is wrong?

Did u take out the screen protection?

My retina macbook pro's audio has a very low voice.

I just have my retina macbook pro yesterday. I played a movie with Mplayer and some video on Youtube, but the output audio was very low. I compared with my macbook air(2011), with the same video and movie, use the same audio level, it is obviously the retina's sound is smaller than air. Is my audio system in retina have some problem? or it is normal?

So not sure how the 2014 MBP's trackpad works but on the ones I've seen the trackpad has to be exactly centered in the trackpad opening. When you service them you place shims around the outer edged before you tighten them in place. Meaning the springs that hold it in place.
If it wasn't centered correctly I could see how it would creak.
https://www.ifixit.com/Device/MacBook_Pro
This is for the 13" late 2013. It's glued in place here so I could see how it would creak if it wasn't properly installer.
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Late+2013+Upper+ Case+Replacement/27438
Step 34.
Make them fix it!

M-Audio FastTrack USB - very low signal level (line/guitar)

I've used FastTrack USB for a couple of years with a microphone through the XLR input with no problems. Now I am trying to connect a line output of a synthesizer to the line input of the FastTrack and the signal level is very low. There is no noise, it's just quiet, even with the track volume all the way up it's still no match for the rest of the tracks.
Any suggestions, except for trying all the knobs and switches on the face and back of the unit (tried that already)? Anybody has similar setup?
I use FastTrack for audio input, and built-in audio for output, it's connected through a hub (no problems for two years). In GB microphone is going to the Channel 1 (mono), and still works fine. Synthesizer goes to Channel 2 (mono) and is really quiet. I tried the syn with two different 1/4 cables with no difference. The headphones jack on the front of the FastTrack works fine with the normal level adjustment range, and if I plug in the headphones directly into the line out of my syn, I have sound, quiet (like you would get by connecting headphones to any line out, turntable even) but steady, so the syn must be fine.
Any thoughts?

No takers. Hm. OK. After some more research on the Net it appears to be that all the Fast Tracks suffer from the same problem, which makes me believe that it's not a bug, but a feature of an unexplainable kind. Oh, well, back to my old iMic noisemaker (this one works, it's just screened very poorly, so it picks up all the possible interference, and also makes its own little nasty hiss--this is why I switched to the Fast Track a while ago--so I will need to cut it out with an EQ, again). Hopefully, the EQ surgery will not affect the synthesizer's sound consistency as severely as it use to do with a microphone.

Audigy 2 ZS Bad Sound. Very low Volu

Hello,
I'll start out by listing my system hardware. Additionally everything is up-to-date including BIOS, Drivers and Operating System
MSI nForce 4 Ultra
AMD Athlon 3000+
2GB of RAM (4x52)
Sound Blaster Audigy 2 ZS
Microsoft Windows XP SP2
I don't think the rest of the configuration settings are needed...
My problem is as follows. Recently after a restart I noticed that the sound was really low while watching a DVD. I turned up the volume not only on the computer but also the CreativeWorks THX 550 speaker system I have. I was then able to hear the sound; however it sounded like the volume was maxed on the computer, distorted, but the overall decibel volume was low. Of course I thought it was a connectivity issue. I tried many things. My first attempt was to check the cabling. My next step was to relocate the PCI Card. I disconnected and reconnected everything. My third attempt was to put it in a different computer... Here's the interesting part. I don't have any other PC's available at the moment only two linux boxes and a Mac. So I took an older sound card I had (Sound Blaster Li've) and plugged it into my PC. Same issue! The overall decibel volume was low, yet the sound was distorted as if the volume was to loud.
My next step went along the lines of testing sound on the board. I went into the BIOS and enabled my onboard sound card. That worked fine. I then reinstalled the Audigy Card. After installing I tried to see if sound was being processed correctly. Now I"m not an expert on this but I would assume sound passing through the card is emulated directly out through the Digital Out. I hooked it into my Digital Optical Recei'ver and everything worked find... That's not a solution. The Audigy has a little latency issue.
I've tried reinstalling drivers, changing my overclocking from off to full to dynamics in between. I'm at a lost here. One would think this is a PCI issue; perhaps maybe IRQ... But I doubt it.Message Edited by SIRKGM4vg on 07-29-200703:8 PM
Message Edited by SIRKGM4vg on 07-29-200703:29 PM
Message Edited by SIRKGM4vg on 07-29-200703:30 PM

First unistall Creative stuff through add remove programs.
Next run Guru3D driver sweeper and double check the log for failed removals.
Next uninstall Creative hardware in Windows device manager. (also tick "delete the driver software for this device")
After that, you should have deleted everything!
As for "the best drivers", both are (the same but) different and it depends on what you want to use your card for. Both work fine wth ALchemy and both get the job done.
daniel_k's latest drivers have equalizer, louder volume and advanced CMSS. daniel_K also has a few hybrid ISO with DVD audio, MIDI and other valuable applications. They don't always perform as they should though for obvious reasons (NO OFFICIAL CREATIVE VISTA SUPPORT - XP applications - No Hardware Audio).
nomoregoatsoup are just recent X-Fi drivers and a basic Creative Audio console. They offer improved sound quality over the official version and also offer limited DTS/SPDIF options like the Dell counterparts.
All current Audigy Vista drivers are inferior compared to XP ones.

Sound is very low volume

I've done a search but can't seem to find any info re the sound volume on my bw G3. The sound out of both the front, built in speaker, and through the headphones, is very low volume output, almost but not quite muted. I've searched and adjusted the controls but to no avail. Could this be a hardware problem or software? There 'is' some movement when I adjust the volume slider but it takes the level from what would normally be 2 of 10 down to nothing. That is, there is no way for me to get the sound to levels that within normal limits. It's like the output is being blocked somehow but is still leaking through enough for me to make out the particular sound (song in this case) that I'm listening to.
Any help would be appreciated. It might not be worth puttiing any money into and I'd like to at least try.
Michael

Michael,
Sounds like you are ahead of the game on testing with headphones. External speakers would not make much of a difference without an amplifier.
"(is there another place to check sound output?)" If you had an AV output you could test sound out of that card. Finding a card might be cheaper than any repair bill and give you a definative answer on if their is a system software level problem.
Sound reading for your edification:
http://docs.info.apple.com/article.html?artnum=58764
http://docs.info.apple.com/article.html?artnum=31314
http://docs.info.apple.com/article.html?artnum=24718
http://www.info.apple.com/kbnum/n24503
These articles do not all address your model but give some perspective on software and hardware issues, including how just reseting the PRAM on some machines is the official Apple response.
If you go to the advanced search link at the top of the page and make a query for "no sound" you should get a response similar to this link:
Link
Be sure and include pre 1997 hardware.
Good luck.
Ji˜m

Recording level through audio interface is very low

I just purchased an M-Audio Fasttrack audio interface. when I plug my guitar in and turn up the recording level in Garageband the recording level is very, very low. Is there another way to increase recording level?

Yes this problem as well has left me very frustrated. If you find a solution please let me know. [email protected] you.

Iphone 5 not making sounds - or very low volume

I had an iphone 4 for over 3 years and it was perfect. I upgraded to an iphone 5 and now constant issues with the volume of tones for text, phone and even sending tone. It just randomly mutes completely or goes to a volume that you can barely hear. All volume controls are at high, the do not disturb is turned off, the mute button is not on. The only thing that fixes this is to power off the phone and turn back on. This is highly aggravating as first I have to miss calls and text to realize the volume isnt working again and then power it down again. This is occuring daily. If I do use the mute button at all as soon as I turn it from mute to on I have to power it down as the tones dont work. Why is this happening?

Hi doonmeister,
Not having service (calls & texts) at all must be very frustrating! It appears that you have done most basic troubleshooting and issue persist. I see that your post is dated November 19; I trust that you called us at 800-922-0204 from other line already and the issue has been resolved by now. Please keep in mind that this is a peer to peer forum and while our Social Media team monitors the posts, the best way to get immediate assistance for critical issues (such as inability to call/text) is to call us from a different line to troubleshoot your device, or send us a message on twitter @VZWSupport at your convenience. If you still need assistance with this service issue please follow me and send me a direct message including your full name as it appears on your account and your wireless number. I'll check the area for service alerts and follow up with you.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

My iphone sound is all the way up. But the sound is very low. How can I fix this ?Help please

Help me

My mac was okay up until a few hours ago. If anyone knows how to fix this, would really appreciate your help. Thank you!

Audio: voiceover volume very low; & can't permanently delete original audio

I'm finishing off a project started by a colleague. In a number of clips, the speed of the footage has been reduced to 25%. The original audio is still embedded in those clips, but is not used and has been muted. I want to record a voiceover, and am using a USB microphone on my iMac. The recording levels work fine when I test them in GarageBand, but when I record the voiceover in iMovie, it's extremely quiet. I've tried increasing the volume to 200%; I've tried turning ducking on and off; and I've even recorded the voiceover in GarageBand, exported it to iTunes, where it sounds fine. But the minute I import it into my project, the volume goes right down.
I've tried detaching and deleting the original audio track from the relevant clips, in case this is causing problems (because the speed of the audio track is also reduced to 25%). But even if I empty my trash, when I go back to the clips, I can still detach the audio, so it hasn't really been deleted.
So. Can anybody suggest a solution to the low volume, and whether this might have anything to do with the speed reduction on the originally embedded audio?

I booted into Windows XP on Bootcamp, and it seems to have the same problem. I also tried the backup of my Tiger system on my external hard drive, and again, the same problem. I tried resetting PMU, but it's still the same. Again, for some reason, my internal speakers are working fine, but when I plug in headphones, the volume is really low even when I turn the volume all the way up. I tried this on iTunes, youtube, and the click sound when you turn up the volume from the keyboard. I can't hear any of them unless I have the volume turned all the way up, and even then, I can barely hear the sound.

Envy X2: Sound Levels Very Low on Keyboard Headphone Jack ...

... much louder/OK on headphone jack on the tablet when disconnected from keyboard. Is there a fix ? I've loaded the latest audio drivers. Also, seems like Beats doesn't "kick in" even though it's checked as ON in the Beats control panel. I can click it on and off and tell a noticeable improvement as if Beats wasn't on at all even though it was checked.
Any ideas ?

Yeah the sound is defective, I have already bitched about it, they seem to not care, I don't think they can do anything about it, it's just designed not to have good sound or even decent sound, the thing is to thin to allow for decent sound, they went for Form over function.
Also i think it uses a low cost horrible chipset, L2s Intel reltek Audio chipset, that would not be able to provide decent sound even in a full sized notebook, but not that I would know they wont tell us anything.
It's a nice Prototype device that needed more work before it was sold, the only thing that lets it down badly is the sound in my Opinion, that and dieing on me just after 30 days of ownership, maybe I can swap it for something that works ????
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/HP-Envy-X2-and-how-to-improve...
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/RealTek-I2s-Audio-Codec-appea...
Have a read

HT1481 My ipod's sound quality has changed and its sound's very low. How should I fix it?

Dear sir,
My ipod once got formatted. Now I hear low sound from my ipod.

First, make sure your headphones are working properly. You can try them with another device, or try a different set with your shuffle.
If the headphones are fine, go to the shuffle's Settings or Summary screen in iTunes. It's the screen that appears when you select the shuffle in iTunes. There is a Limit maximum volume setting there. Make sure that slider bar did not get set to a low volume.
If that does not help, you can try doing a Restore on the shuffle in iTunes. The Restore button is on the Settings or Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If the cause is related to a problem with software or settings, the Restore should fix it.
If that does not help either, there may be a hardware-related problem on your shuffle.

Iphone 6 Plus audio sound is very low

Similar Messages

Maybe you are looking for