IPhone 6 Plus/iOS 8 and bluetooth connectivity

My iPhone 6 Plus would pair with both my cars, but couldn't make or receive calls!  Erased iPhone and started fresh and it worked.  Then restored from Backup on my computer and luckily it still worked.  Then I updated to iOS 8.0.2 and lo and behold again I couldn't make or receive calls through the car even though it was paired!  Had to go through the whole process I described above again, and then it worked.  Is this going to happen every time Apple has a update?  This is crazy!

The support tech is wrong.  Has nothing to do with the car's firmware.  I had a 5S that I upgraded to iOS 8 and it worked fine.  New iPhone 6 Plus enters the picture and that was the problem.  And the rest I wrote above.  The new iOS 8.0.2 is riddled with so many bugs, it's ridiculous.  Interestingly, when Steve Jobs was alive, issues like this simply didn't exist......my hope is that they fix all these issues quickly and stop blaming it on everything except themselves.  Very disappointing to say the least.  This is probably the worst iteration of all the iOS versions with regard to bugs and issues......and who knows, maybe it's actually the phones......

Similar Messages

  • I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    Hi,
    Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
    The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
    cheers

  • I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

  • I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

    Hi
    I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
    Thanks for your input
    Felix013

    try a RESET ALL SETTINGS

  • I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. Bad job testing the software Apple.

    I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. What's the fix? None of the recommended fixes work in any of these devices. Reset device, reset network, renew lease, etc. None of them work.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I have upgrade my iphone 4 to ios 6 and from this moment every day my iphone go to block. it turn off and i can't turn on if i don't connect to charge connectors.. someone have the same problem? how can i solve it?

    i have upgrade my iphone 4 to ios 6 and from this moment every day my iphone go to block. it turn off and i can't turn on if i don't connect to charge connectors.. someone have the same problem? how can i solve it?

    I am experience a similar problem, my iphone 4 either turns off by itself or I am unable to answer a call. Everything just blocks. After contacting 2 different apple service spots still no answer as to how can we fix the problem. Worse, I am unable to revert back to ios 5.1.1 where everything worked just fine.

  • Uploaded Iphone 3GS to iOS 5 and lost internet connection (WiFi works)

    I uploaded my Iphone 3GS to iOS 5 and lost 3G internet connection (WiFi works). Anybody has that same problem??
    I lost all my music too. What I don't get is that when my iphone  is connected to Itunes, the music appears there (i even can play it), but the device doesn´t have it. I try to sync it but it doesn't work. What can I do?
    Help please!!!

    I went into Settings>General>Network>Cellular Data Network.and changed my APN in the 'Cellular Data' section from idata.o2.co.uk to wap.o2.co.uk. 
    wap.02.co.uk will not work for you, that is my provider's setting.  I would contact Telcel and see what your APN settings should be, but I get the impression having read through many conversations now that the upgrade to iOS5 sometimes changes these settings.
    I left the 'Visual Voicemail' and the 'MMS' settings the same and everything seems to be working ok...
    Oh - and I did lose my music after.  I've managed to restore my purchased by going to the iTunes store on my phone and dowloading them all again.
    Good luck, hope that sorts it.
    B

  • I upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet

    i upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet 

    I can use my iPhone only with wifi .
    I don't get any signal and I can not connect to
    The Internet without wifi.
    When I don't use my wifi from home I have lost all connection to the net
    My iPhone is on and working it does not shut down

  • HT4623 I recently updated my iPhone 4 to iOS 6 and suddenly after a few days my App Store Kept telling me it couldn't connect to iTunes Store!

    I recently updated my iPhone 4 to iOS 6 and suddenly after a few days my App Store Kept telling me it couldn't connect to iTunes Store! How Can This Be Solved?

    If you would take a moment and looka t the other posts in the forums, you will see that this is being asked over and over and over and over again.
    Apparently there is an issue with itunes.
    Be patient.  Wait.  Try again later.

  • I just upgraded my iphone 4s to ios 7 and now it will not connect to my hotel wifi, it asks to accept cookies and ive done that and it keeps asking that.

    I just upgraded my iphone 4s to ios 7 and now it will not connect to my hotel wifi, it asks to accept cookies and ive done that and it keeps asking that.

    Hi JokerzLaff,
    If you are having issues with your WiFi connection after updating to iOS7, you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Regards,
    - Brenden

  • IOS 8 and Bluetooth Phone and Audio Streaming Failing

    I have a 2013 Nissan Pathfinder and a 2015 Nissan Leaf, both with bluetooth phone integration and audio streaming support.  Both cars worked fine when I had two iPhone 5s paired to both cars and running latest iOS 7.  Both phones worked in both cars and could fully integrate to make calls and also to stream audio from device to car.
    When I upgraded one iPhone 5s to iOS 8 and replaced the other with an iPhone 6Plus running iOS 8, both are having problems with both cars.
    1.  Both gave a "failed connection" message but the phones do actually pair.
    2.  Both cars show a phone handset with a line through it on the in-car display which means no connection.
    3.  The "5 bars" cell signal indicator on the in-car display no longer shows up.
    3.  Outgoing calls made from phone and put through car system work fine except for some garbled audio.
    4.  Incoming calls make the wrong screen appear on the nissan display and can not be answered by the display on the car.  Pushing the answer button on the in-car display doesn't do anything.
    Lots of other tiny issues.  Apple needs a fix here.  I called Nissan and they said it's 100% Apple's fault.
    Anyone else having issues with Nissan Bluetooth integration or any other manufacturer?

    We have a 2008 Nissan Sentra - The bluetooth pairs ok.  When a call comes in on my 5S or my wife's 4S the bluetooth does not do anything.  The bluetooth does not ring and it does not connect to the call.  The call has to be answered on the phone.  Like I said, the phones are paired.  You can access Siri through the bluetooth to initiate a call.  Once the call is connecting, the bluetooth drops off and there is no sound.  Just like when you receive a call.  Apple needs to fix this.  This is completely ridiculous.  I WAS going to buy an iPhone 6.  I will not if this is not fixed.

  • Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Hi Tech5Apple,
    Thanks for visiting Apple Support Communities.
    If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    All the best,
    Jeremy

  • How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

  • I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen.

    I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen. Help!

    Hello there, parihargs1.
    To troubleshoot display brightness issues the following article provides 2 key steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Of note is the following:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Display does not adjust brightness automatically
    The ambient light sensor brightens the display when using the iPhone in brightly lit environments, and dims the display in low light. To test this sensor, do the following:
    If the iPhone is in a protective case, remove it from the case. If there is a protective film on the display, remove the film.
    Verify that the Auto-Brightness setting (Settings > Brightness and Wallpaper) is set to ON, and that the Brightness level is set near the middle of the slider.
    Press the Home button to return to the Home screen and then press the Sleep/Wake button to lock the iPhone.
    In a bright environment, cover the top third of the iPhone to block the light, then press the Sleep/Wake button or the Home button to wake the phone. Slide the slider to unlock the phone.
    Notice the brightness of the screen and application icons; they should be somewhat dimmed.
    Remove the cover from the top of the display and in a few moments the display should get brighter.
    If these steps do not resolve your issue please refer to the "Issue not resolved" section for your next step.
    Thansk for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • HT5934 i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???

    i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???

    raghav sharma wrote:
    i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???
    Try This...
    Close All Open Apps...  Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Help with exporting. Video looks horrible after export, but great when in premiere pro

    Hey guys, looking for some advice on exporting. When I finish a video, the color and everything looks great while in premiere pro, but after exporting it, the color ends up looking dull and the whole video looks blurry.  I'm filming with a canon vixi

  • MuVo2 playli

    Hi I have a MuVo 2 and use Mediasource software. When creating playlists (in the usual way following instructions), I end up with a separate folder in my actual player lists that duplicates the playlist title and contents - if I delete it off, the pl

  • OLE images are not getting transfered to the pdf format

    After executing the oracle report file 6i and while sending the report file directly from the report screen to the microsoft outlook mail by clicking the mail option from the report, the OLE Images are NOT getting converted to the mail attachment. Re

  • PO value should not increase from PR value

    Hi I hv a PR for an matl with the value specified in valuation tab at PR level. Am creating PO with respect to the above PR and if i exceed the PR value in the PO.. I need a warning or error at this time. How this can be done? Vijay

  • Error message u2018ScoreIndexu2019 is undefined

    Hi, When we try to Create a Score Metric on BICA we are experiencing the following error. Our system has been stable for a while now but we have experienced this error for a while in development but did not resolve it. The error no longer occurred fo