IPhone 6 screen is warmer than 5s screen?

I just got my iPhone 6 last Friday, and although I'm very happy with it, when I view the screen next to that of my iPhone 5s, the 6's screen seems less bright and less white. Due I guess to the lower contrast, text seems a little harder to read and less sharp than on the 5s. I'm wondering if this is normal or if perhaps my screen is defective?
I've read comments about the corners of the screen being a bit yellow, about time being needed for some glue (?) to dry, but I don't have a problem with part of the screen. It just seems the entire display is warmer and therefore less bright-white looking than on the 5s. It's sort of the difference between a 2700 K light bulb and a 3500 K light bulb, where the former looks warmer and more yellow than the latter.
Does anyone else out there feel this way? Is it something I should be concerned about or is it simply the way the new iPhone 6 screens are supposed to look? Thank you for any comments.

Thank you for your reply. I stopped at two T-Mobile stores this morning and compared their iPhone 6 display models to my iPhone 6. In both cases their screens were noticeably cooler/brighter than the warmer/duller screen on my phone. One of the employees even said on my phone the colors don't pop and the text seems a bit blurrier. Luckily it's only a half hour drive from my place to an Apple Store, but it's still a hassle to try to get my new phone swapped for another, which may not be in stock. And then I have no guaranty that the new phone won't have the same problem. I might even call T-Mobile and see if there's any chance I can send my new phone back and transfer service back to my 5s. Okay, well, thanks again for your comments.

Similar Messages

  • Record screen captures smaller than the screen size of my captivate tutorial

    Hello,
    I'm fairly new to captivate, but what I want to do I thought
    was very simple. I'm using the Record feature to record screen
    captures navigating applications, but when I use them in the
    captivate tutorial I'm creating, I don't want them to show full
    screen. I would like my template frame (with company name, logo,
    and some buttons) to remain on the left side of the screen, and
    show the recording in a box on the right. How can I do this?
    Thanks!
    Michaela

    This thread has been cross posted to two different forum
    categories. Please direct any replies to the post in the category
    where the question was first asked. You may do this by
    clicking
    here.
    Forum posting guidelines may be read by
    clicking
    here if you are curious as to why cross posting is a bad
    thing.

  • The left top corner of my iphone 5 is lighter than the rest of the screen. What should I do?

    I just noticed that the left top corner of the screen is lighter than the rest of the screen. I have turned off the phone but not sure what to do next. Any suggestions? Shall I just take for repair?
    The screen isn't cracked and phone wasn't in contact with water.
    Thanks

    Hello Reni_rex,
    The article linked below provides some useful troubleshooting steps and information that can help get your iPhone working again.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Could it be that the lock screen button on the Iphone 5 is looser than on the Iphone 4?

    Could it be that the lock screen button on the Iphone 5 is looser than on the Iphone 4?

    There isn't a separate app icon for Facetime for the iPhone like there is for the iPad and iPod Touch.  Facetime is built into the iPhone's iOS.
    Here a refresher on how it works: 
    iOS:  Using Facetime, http://support.apple.com/kb/ht4319

  • IPhone stuck on connect to iTunes screen do not use iTunes or have it installed on my PCs; does anyone know of an easy fix other than updating windows then installing iTunes?  I don't have time to go through the process again and at this point will d

    Hi all- I'm new to this online community of Apple support; my iPhone 5s is stuck on a screen that has the connect to iTunes icon, this started after I upgraded to IOS 8.1.1 from the beta to fixed version; I don't use iTunes and have an IPad, home PC, office PC, and Galaxy Tab, and I went through (failed) the process of installing itunes on my office PC but needed to update windows; after going through all redommendations I could find, including Apple phone support, I still haven't had success.  Does anyone know a way to get my phone past that screen?  I don't have time to keep doing updates and installation attempts;'I don't care about the content at this point; but I can't get to the settings to "reset all" and start from scratch; I bought i loud for storage and have an old 4s that has a broken screen butt still works and I have another active 4s on my plaN.  Im not tech savvy myself; but I know some community members are pure geniuses! !I just need a fast way to fix this bug;'I use it for work and it's been inaccessible all week, the only time I have to go to an Apple Store is this weekend; I don't want to move to the iphone6 because it's too big.  I didn't know this community existed; it's cool; for this issue, I just have no time for a new phone or phone support again; I'm posting this question as a last resort; any feedback is appreciated......and I apolo in advance if this post goes under the wrong thread

    No. You have no alternative but to plug it into a computer running iTunes and restore it.

  • Moving ios6 icons more than 5 screens soft-reboots iPhone 4S

    Ok this is a weird one. Just upgraded to IOS6 and didn't want Passbook on my front screen, so I tried to move it to my 'less used apps' page - 6 screens over. Each time I do, it either moves, or zips back to where it was when I drop it, and when I hit the home button, my screen dims, and I get the apple logo for about 10 seconds before the unlock screen comes up. The screen remains dim until I lock the phone and unlock it again, at which point the screen is the correct brightness but the Passbook icons is back where it was.
    So I tried it with other icons - same deal - 5 screens or less and it's OK. 6 screens or more and I get this weird 'soft reboot' of the phone. I've tried power-off rebooting but it still does it. ios6 bug on iPhone 4S?

    I encounter the same problem.
    From my investigations, the reboot only accurs when moving icones from the last screen, whatever the number of screens is. I moved a lots of icons from all screens but the last : no reboot. I move only 1 icon from the last screen, I have a soft reboot. I now wait for bug fix...
    This certainly occurs on iPhones prior iPhone 5, and certainly has to do with the number of icons counting...
    It's the first time I see iPhone reboot by itself since my first iDevices experience.. Too bad !
    By the way : I have to move a lot of icons because I lost all my Icons arrangments and folders during the iOS6 upgrade.
    I'm overall very dispointed with Apple's last iOS release, which to me all but a quiet transition.

  • HT2101 i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not n

    i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not normal. compared it with iphone 5 and 5s and they are not getting warm like that. is it a software or hadware issue?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • IPhone 3G on Apple stuck start screen

    Hello,
    My iPhone (new out of the box today) has frozen on the Apple start screen after I connected it to iTunes. I updated the software and it restarted but got no further than this screen. It will switch off if I hold the home button and iTunes recognises it after it has been connected for a few minutes. I have restored it since and it is still acting the same.
    The battery wasn't flat when I connected it and this is the first time I have plugged it into my Mac.
    Thanks in advance for your solutions and help, Lauren.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    http://support.apple.com/kb/TS3281

  • Blank screen and warm MacBook

    My air would not wake up and just show a blank unresponsive screen but the computer is warmer than usual

    Try Rebooting it
    -Robert

  • How can Apple claim the iPhone has a Super-High res screen when its not even HD? From what I understand, 1280x720 is basic high definiton, and the retina screen only goes up to 1136x640.

    How can Apple claim the iPhone has a Super-High res screen when its not even HD? From what I understand, 1280x720 is basic high definiton, and the retina screen only goes up to 1136x640.

    There's more to resolution than pixel count. Consider the pixel size on the iPhone screen in comparison to the pixel size on your forty inch HD TV.

  • IPhone 4 flicker issue on lock screen?

    recently bought a 32GB iPhone 4 on 4.3.3 installed and there's a flicker on the bottom lock screen. Right before it goes to the lockscreen there is a slight flicker. Has anyone experienced this. Or can anyone look to see if they have this problem. I went to bestbuy and I usually go to the phones section with my cousin anyways to see the latest well there were iPhones out to see and I looked and the bestbut one had the same thing but I want to see if anyone else had this or knows a solution to this. Should I downgrade or what? I had an iPhone in November and It did not have this issue. Please help
    Thank you

    I am having and have had this issue for quite some time now. My iPhone 4 (4.3.5) touch screen freezes periodically and actually pretty frequently. Theres really no rhyme or reason to when or why it does it and I don't recall ever having this issue before upgrading to the latest iOS update.
    Most of the time what I am able to reslove the issue (temporary) is pressing the power button. On occasion I have shut the phone all of the way down and restarted it.
    Here are the issues that I am expereincing:
    -Call finished and unable to end call on touchscreen
    -Incoming call touchscreen will be unresponsive and unable to answer
    -During call have another call come in and touchscreen will be unresponsive, cannot ignore, answer other caller...nothing
    -Press the home button to wake the phone and the slide to unlock will not slide
    -Press app icon (any app) and the icon idicates that I have pressed it however, the phone does not respond and the app does not open.
    I took my phone into the apple store and they ran diagnostics on it and could not find any issues other than a few dropped calls. The "Genius" that was assiting me told me that my iOS must be corrupted and that we needed to do a complete restore. So, thats what we did and I left the store. I'm not sure exactly how long it took for it to start happening again but it wasn't long. In fact I'm not sure that restoring it did anything at all.
    So...I'm not sure what is causing this and I don't know what to do about the issue now. I pre-purchased my iPhone 4 when they came out and have had it since then (out of 1yr warranty and did not purchase applecare).
    I do wonder if I could possibly have a "bad" app installed on my phone that is causing this to happen.
    Any ideas or suggestions would be very helpful...I am really frustrated at this point.

  • Iphone 4 hang up on lock screen

    hi my iphone 4 is hang up on lock screen and nothing is working, i got a text msg which is displaying on the screen on the the lock screen, please suggest what can i do, even though i plug in for charging and trying to sync but nothing happens

    I am having and have had this issue for quite some time now. My iPhone 4 (4.3.5) touch screen freezes periodically and actually pretty frequently. Theres really no rhyme or reason to when or why it does it and I don't recall ever having this issue before upgrading to the latest iOS update.
    Most of the time what I am able to reslove the issue (temporary) is pressing the power button. On occasion I have shut the phone all of the way down and restarted it.
    Here are the issues that I am expereincing:
    -Call finished and unable to end call on touchscreen
    -Incoming call touchscreen will be unresponsive and unable to answer
    -During call have another call come in and touchscreen will be unresponsive, cannot ignore, answer other caller...nothing
    -Press the home button to wake the phone and the slide to unlock will not slide
    -Press app icon (any app) and the icon idicates that I have pressed it however, the phone does not respond and the app does not open.
    I took my phone into the apple store and they ran diagnostics on it and could not find any issues other than a few dropped calls. The "Genius" that was assiting me told me that my iOS must be corrupted and that we needed to do a complete restore. So, thats what we did and I left the store. I'm not sure exactly how long it took for it to start happening again but it wasn't long. In fact I'm not sure that restoring it did anything at all.
    So...I'm not sure what is causing this and I don't know what to do about the issue now. I pre-purchased my iPhone 4 when they came out and have had it since then (out of 1yr warranty and did not purchase applecare).
    I do wonder if I could possibly have a "bad" app installed on my phone that is causing this to happen.
    Any ideas or suggestions would be very helpful...I am really frustrated at this point.

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • My iphone 4 isn not responding the screen is just showing a usb lead and the itunes symbol. When i plug it into my desktop mac and link it to itunes ,itunes is telling me the phone is in a restore mode .can i get it to respond without restoring ?

    my iphone 4 is not responding the screen is just showing a usb lead and the itunes symbol. when i plug it into my desktop mac and try to sync it to itunes ,itunes is telling me the phone is in a restore mode. How do i get it to respond without restoring the phone to new ? there is no option to restore with backup as i have not backed up any of the data on the phone any help would be greatly appreciated thanks

    http://support.apple.com/kb/HT1808
    You can't  not restore if you have reached this point

  • How can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    how can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    Hi,
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • In Bw Basis Task

    Dear all I am new to sap, In Sap BI7 - Basis person Tasks or Activity's ? Kindly help us Regards Sriram

  • Insérer du code C dans un VI LabView

    Bonjour à tous, Je voulais savoir comment faire pour intégrer un bout de code en C dans un VI Labview, comme une sorte de bloc auquels on définit ses entrées et ses sorties qui sont relié à du code Labview ? Je sais qu'il y a la possibilité d'appelle

  • Sales order split line user exit MV45AFZZ

    Hi Guys. Requirement is to split the sales order line items into multiple based on certain requirement. I Started coding in MV45AFZZ (USerexit_Save_Document_Prepare).  Basically what i am doing is looping at XVBAP and based on some condition insertin

  • No battery or time display after Time Machine restore

    First, yes, I've checked the preferences. Laptop fell, at a gig. HD didn't make it, but no other perceptible damage. Replaced old 320 gb SATA with 500 gb SSD. Restored from Time Machine backup. Everything appears to be back to normal (bravo Time Mach

  • PHP Default to Specific Schema

    We are moving from a PHP(5.2.6)-mySQL environment to a PHP-Oracle environment. I am being supplied with one database which I am to set up 2 schemata one for development and one for production. Is it possible to set up my development and production in