IPhone 6 stuck on iTunes icon while doing iOS 8.1 update

Brand new iPhone 6 just set up out of the box - was working fine - then did iOS 8.1 update and the phone is now stuck on a black screen with the red iTunes icon in the centre, a graphic of a lightning cable coming up to the icon, and an arrow indicating the cable should be connected (to iTunes?). Connecting to a PC running iTunes does nothing.
Is there way to clear this?
Thanks
D

If you can't update or restore your iPhone, iPad, or iPod touch
you restore your phone using iTunes.

Similar Messages

  • Had to restore my iPad 2  while doing iOS  7 second update

    THen had to change my apple password then my e mail password now can't send mail but can receive .have set up  new mail account in settings with new password but still does nothing

    Edited, my comment was wrong.

  • My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.

    My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.

    Sounds like a 'stuck' Shift key. You could try to take the key off and put it back on yourself (should be some info on that from ifixit) or just take it to your local Apple Store and have them fix it.
    Clinton

  • Why does my iphone have an itunes icon and a charger shown

    why does my iphone have an itunes icon and a charger shown

    Try this
    If you can't update or restore your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT201263
    Best of Luck

  • Updated iPhone - connect to iTunes icon frozen on screen- iTunes doesn't recognize iphone

    Updated iPhone - connect to iTunes icon frozen on screen- iTunes doesn't recognize iphone

    Try pressing the sleep/wake button and home button simultaneously until the Apple logo appears.  If that doesn't work, then try this http://support.apple.com/kb/TS1538

  • IPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

    iPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

  • Getting Error while doing Control Panel - Windows Update Error code is 80070103

    Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
    Microsoft - Other hardware - WinUsb Device
    Please provide your email ID to send the Error screen shot.

    Hi!
    Check the following link to see if it solves your problem:
    http://support.microsoft.com/kb/952032
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • I am getting a service start and stop alert while doing the windows server updates.

    HI
    I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
    Thanks & Regards
    Abhilash K Joy

    Hi,
    The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
    This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
    You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135/en-us
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Verifying iphone stuck on itunes

    i went to finally update my 4s to ios 5.1.1 and now i have on the screen the usb and itunes symbols and cannot get it off itunes wants me to restore but it stays on verifying for too long not having any error messages just nothing but the symbols on the phone with the occasional time it restarts and i get  the apple symbol but then back to square one i tunes is doing nothing but verifying please help i have no apple store near to take to and i need my phone.

    Right Click this link and select SAVE AS...
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-5828.2 0090127.aQLi8/iPhone1,22.2.1_5H11Restore.ipsw
    Remember where you saved it. Do not open it.
    Hold the SHIFT key while clicking the "Update" or "Restore" button in the iPhone tab in iTunes
    On Mac:
    Hold the option key while clicking the "Update" or "Restore" button in the iPhone tab in iTunes
    Subsequently, a dialog box will come up which will allow you to select the firmware file to use for your update. At this point, simply browse to and select the firmware file that you downloaded.

  • Stuck at itune icon and cable!!!

    My ipad is stuck while updated ios 6 from itunes.
    it show itune icon and cable. not responce at all.w
    hat should i do?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Iphone stuck on itune mode with emergency only,help

    my iphone froze after i was downloading an update i tried everything but it could not turn on,i restored it but now its just stuck on the itune mode with emergency pgone calls with the itune icon i have tried almost all the troubleshooting,restored it again but nothing is happenning its been 2 days and i am so frustrated i dont know what to do please help

    I have haerd that if you hold the reset/sleep + home button to reset, the when the apple logo appears let go of the reset/sleep button and hold the home button and it will put it into discovery mode when this happens plug it into itunes............... it might take a few tries

  • My iPhone has an iTunes icon and usb connector

    I cannot turn on my iphone because it has an itunes icon and usb connector showing.  It isn't recognized in itunes on my brand new iMac

    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    iPod doesn't appear in iTunes or on the Mac desktop.
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • Iphone 5 doesn´t work after an ios 8.2 update via itunes

    I was updating my iphone 5 model A1429 via itunes on my windows 7 computer,
    it was extracting the software when my computer died and it was showing the apple icon and a grey progress bar on the iphone.
    When I turned on my computer again, the itunes said "unexpected error occured, couldn´t update the phone" or something like that and that´s it.
    Since then itunes doesn´t recognize my device and on my iphone there is still the apple icon and the grey progress bar.
    What can I do?

    Hey Kristik24,
    I would like to recommend that you attempt to restore your iPhone using the steps in the following article:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht1808
    If you put your iPhone into recovery mode and your computer is still not recognizing the phone, use this article to help you address the issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • TS3219 i cant restore my iphone, stuck at itunes logo

    my iphone 4s need to restore and showed the itunes logo, i just connected it to my windows itunes nothing happens and my iphone shows need to connect to itunes. please show me how to complete this.

    Hi jeffalif,
    If you are having issues with an iPhone showing a Connect to iTunes icon, you may find the following articles helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • IPad won't recover. Stuck with iTunes icon.

    I have an iPad2. I saw a new update for iOS and tried to install it. (I dont remember which update and now can't get back to that screen.) The iPad now shows the iTunes icon and a picture of a USB cable. I tried to connect the iPad to iTunes on my computer, but the computer responds that the iPad is in recovery mode and recovery must complete before connecting to iPad. But I can't complete recovery.
    Tried holding Sleep and Home buttons simultaneously, but only got Apple logo, a dark screen, and then the return of the iTunes icon and USB picture. No slider bar to turn off iPad. It feels like a manual version of an endless loop. What can I do? Stupidly, the iPad isn't totally backed up.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

Maybe you are looking for

  • BW 7.0 DataSource

    Hi Experts This is my problem: I must import a big Oracle table into BW 7.0. (about a 100 fields) As i don't want to introduce all the fields manually, I use the "Field proposal" feature in the proposal tab of the DataSource. Using DBConnect the fiel

  • Missing Master and Derived Roles

    Hello All,               I have got an odd scenario and I am hoping some of you might have run into the same issue or might point me to the right direction. Back ground We are on ECC 5.0 and have Master Derived Concept, and then Derived Roles are gro

  • How do I enable scrubbing in the iTunes 11 mini player?

    How do I enable scrubbing in the iTunes 11 mini player?  I don't see a bar or any way to manually skip to the part of the song I wish to play.

  • What app works for mail on a first gen ipad? Thank you

    What app works for a first gen ipad to get mail. I need an easy button put on it. So far yahoo and gmail aren't supporting my old ipad. Any ideas?

  • About nternal tables

    while creating an internal table how we can know that here we can use standard table or hashed table can u plz tell me with a small example....