Iphone 6 vibration problem
i have checked all ways but its not working
under sounds - vibration settings , restore , restart everything
but still not working.
please give me some solutions.
do i have a chance to change with new one ?
thank you
Hi ugur07,
I'm sorry to hear you are having issues with your new iPhone 6. Based on your description and the steps you have already take to troubleshoot the issue, you may need to have your iPhone evaluated or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
Regards,
- Brenden
Similar Messages
-
My iphone 3gs has a vibrating problem where the phone continuously vibrates
my iphone 3gs has a vibrating problem where the phone continuously vibrates
Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
If this does not work, set it up as new device: Use iTunes to restore your iOS device to factory settings - Apple Support
If still no luck, get it checked by an Authorized Apple Service Provider or Apple:
iPhone - Contact Support - Apple Support
Has the software on your phone been modified at some point in the past? -
Why the iPhone vibrates 2 times when the iPhone OS is starting?
Someone know why the iPhone vibrates two times when the iPhone OS is starting (and the apple logo appears)
In my case, this rare event occurs when a problem with an application (3rd party) force to iPhone to restart or when occurs a problem during the sync with iTunes. After this event, my iPhone never load (your OS) and the only way is the restore.
nullAmazing how much trouble when can get into by taking shortcuts before we understand something... isn't it....
Read the API and find out for yourself what events are triggered by a JButton......
Remember thsi advices:
1) Before using shorthand event handling, make absolutely sure that you understand the process back to front...
2) Write your own event, listener and implementer in order to get a clearer picture...
3) Until this is clear to you, always implement the appropriate listener and override the necessary methods.... -
IPhone 5 silent button damaged? iPhone vibrates constant when I put it to silence.
As the title says. I have had this problem for a couple of weeks. When I turn the silent button on, my iPhone vibrates constantly. It even signals its turning off and on silence mode repeatedly. I dont know how or why it happened, it might have happened when I lost the iPhone one time.
same here....
did not lose it though.
did a hardware button reset yesterday,
not sure wheter it will work. i have an
appointment at the apple store in 2 days,
maybe i get my 5th iphone 5...... -
Is the only way to stop the iphone vibrating while on a call to set it to silent?
Is the only way to stop the iphone vibrating into your ear while on a call to set it to silent?
Many thanks.Yes.
-
I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
$headers = "MIME-Version: 1.0\n" ;
$headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
$headers .= "X-Priority: 1 (Highest)\n";
$headers .= "X-MSMail-Priority: High\n";
$headers .= "Importance: High\n";
// Additional headers
$headers .= 'From: Rakesh <[email protected]>' . "\r\n";
foreach($disemail as $email)
$to = $email;
$subject = $succMessage['email_subject'];
$message = $smsText;
mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
$smsText = utf8_encode($smsText);i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
would like to have your thoughts though.
$headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n format=flowed Content-Transfer-Encoding: quoted-printable"; -
Does the iPhone 4S problem of reducing the signal quality? ("capture of death")
Does the iPhone 4S problem of reducing the signal quality? ("capture of death")
You make no grammatical sense.
-
Why won't my iPhone vibrate anymore?
Why won't my iPhone vibrate anymore?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????
We are users here. We cannot possibly know when a new update will be available.
-
I recently purchased my first MacBook Air but am unable to set up my @live.ie email account. My emails to this account come through to my iphone no problem. Can anyone help please?
Open Mac Mail.
From the menu bar click Mail > Preferencees then select the Accounts tab then the Account Information tab then click + to add the account. -
Iphone 4 problems after 7.0.2 update--Especially with keyboard entries
I am having serious iphone 4 problems after installing the 7.0.2 update. Mostly it is with use of the keyboard. Each key stroke takes about 8 seconds to show. It is truly disabling. Apparently many others have had various problems. The one thing the Apple Tech would tell me was that 7.0.2 cannot be uninstalled. I have restarted & reset. Settings shows I have more that 20 free GB of space, though I don't know if that's important.
Sure would appreciate help! Thank you!settings - general - reset - reset network settings.
also turn off automatic app updated... -
Why is my iPhones volume silent only between the hours of 8pm and 7am when the night selection isn't selected? How can I fix my iPhone 4 problem?
May be you have turned the DO NO DISTURB in your iphone settings.
Check as below DND settings
Settings>>Do Not Disturb
If you are iPhone is on version iOS 5.X there was a bug which does not let the DO NOT DISTURB function properly.
SO, its better you to latest iOS version 7.0.4, no other versions of iOS are signed by APPLE hence forth. -
I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help
try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.
-
my iphone have problem. i was tried to update latest version to phone that time gets freezing. iphone shows only charge plugging can you resolve my problem?????
Hello rj_23_sv,
I would be be concerned too if I was not able to update my iPhone. If you have not resolved the issue, I recommend following article for an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
As always, it is a good idea to create a backup before hand:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My iphone has problem activating. It says incorrect apple id but the apple id is correct
My iphone has problem activating. It says incorrect apple id but the apple id is correct ?
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
You are seeing your old apple id because that was the ID that was used to download the app, you can't merge apple id.
to update the app, you will have to enter the old password.
Any new apps you download with your new id, will use that id and password. -
Ok. I'm running 3.1.3 on iPhone 3G.
Recently my iPhone just decided that it wasn't going to let me take pictures anymore. All it allows me to do is open the camera app and it shows the camera shutter and that's all it shows and a restart of iPhone doesn't work and a restore of iPhone doesn't help. I don't know what the problem could be. It hasn't gotten any water damage or any physical damage to cause this to happen. I really wish someone could help ! I love to take pictures of funny things and show my friends. Now it used to be jailbroken but I unjailbroke it about a week after 3.1.3 came out and it hasn't been jailbroken since. This problem just started with my iPhone about two days ago.Hello. I have just purchased a used Apple iphone (8GB)from a local salesmen that sells used items for a cheap price. (For example I purchased this phone for the low price of $200.00). After I purchased it I took it home and, with the instructions given by the salesperson, I jail broke my iphone to a Cincinnati Bell Network Plan with my current SIM card. I realized the iphone worked perfectly as if it was brand new, except for one thing, when I went to take a picture the camera didn't work correctly. While researching my iphone's problem on the internet I have not seen a problem quite like mine. I will explain: When you open the app for "camera" on my iphone by clicking on it the camera comes up, but instead of showing on the screen what a normal camera would show, it simply shows a screen that looks to me as what a closed lens of a digital camera would look like if the screen were to show you. It looks like a closed camera lens every time I open up the app with a small icon on the bottom which symbolizes a camera. When you click on the camera icon the iphone does nothing and acts as if you clicked on nothing. To solve this problem I have taken it back to the salesman to ask for help. He took it in for 2 days in which he said he would fix it. When he returned it he sated that he fixed the problem and all I would have to do is put a different camera app on my iphone. However after trying 3 different camera apps, which i wasted money on, I am still left with the same closed lens look on every camera app I have installed. All the camera apps on my phone, new and old, do not react to any touching of the screen after open to open the lens or take a picture. They just simply show the "closed lens" look on the screen, thus NOT fixing my problem. Thank you for any help you can address my problem with. It is much appreciated and if I can fix this problem I won't feel as if I have wasted $200.00 and counting on my iphone and the apps I have installed to fix the issue addressed above.
Thanks again for any assistance in this matter,
Batsakis
Maybe you are looking for
-
really once every 12 months is a bit silly, it should be unlimited..
-
Billing Document not released to accounting
System is not allowing to release the document for accounting. and even after saving the accounting document is not reflecting in document flow. Please suggest the needful as to how to fix this problem. The material master contains standard price .
-
How to access installed Add-ons like OneTab?
I have installed OneTab to my Firefox am unsure how it works as I can't find the icon/button/shortcut to access it. It is showing as 'Enabled' in the Extensions list.
-
How to insert horizontal line dynamically after every line item in sapscrip
Hi All, I have to insert a horizontal line after every new item in sap script. How to do this . In some material there is2 line item or in other line item it ay be more . How to insert horizontal line dynamically after every line item Point will be
-
Own NC-Tool Table for Drill Export
Hello, for my PCB manufacturer I have to supply drill data in the Excellon 2 format. The NC-Drill export tool allows only to adjust the number of integers, digits and unit format. The resulting *.drl file contains a subsequent list of tool numbers fo