IPhone 6 won't connect to home WiFi - Password Incorrect!

So, I got my brand new iPhone 6 yesterday.. Everything seems to work fine, except for internet connection..
Every time I attempt to connect, it rejects me, and tells me that the password is incorrect.
I also, can't really reach the the network by walking only 10 meters away.. I really have to stand right next to the router to get a chance.
I've tried reseting my phone completely, and it still doesn't work.
I can easily connect at school, that why I really can't decide if it's a hardware issue, or if it's my home network.
I just don't get it... Because we're a lot of users at home, we got tons of devices connected to the specific network. And its working impeccable.
So my question is.... Does this have something to do with iOS 8 and it's wellknown bugs, or do I have to get my iPhone replaced?

I just tried this and it worked, hopefully it works for you too, I have spent the last 3 hours trying to figure this out and nothing worked, I tried rebooting both my phone and the router, turning the airplane mode, etc etc I even took the password requirement off my router and still it would say "unable to join network"
All along it was my router and not my phone.
The routers have a list of allowed devices, called MAC filtering addresses, I had to manually add my phone's address and that fixed the "incorrect password issue"
I went to General > About > Wi-Fi address (copy that long number/letters thing) then log into your router and access the MAC filtering allowed devices list and enter that address in there and save it, that indicates to your router that your phone is allowed to access the network.
As soon as my husband added that address I tried entering the network password on my phone and finally it connected
Good luck!

Similar Messages

  • MacBook and husband's iPhone won't connect to home Wifi, but my iPhone and iPad will.

    As of this week, our home Wifi won't connect our MacBook (2008) or my husband's iPhone 4 to our home Internet.  Our iPad 2 and my iPhone 4 still connect no problem.  We appear to get the signal, but get error messages about not connecting to the Internet with browsers.
    We've tried turning things off and on, forgetting and re-adding networks, and copying info from my phone to his, but have all been unsuccessful.
    We share our Internet with our neighbor and nothing has changed with that.  We asked her to turn off/on the router and/or modem with no change.
    The ONLY difference I can think of is my husband started his last semester at school this week and he uses both devices on campus.  He has to use his campus ID and password to get on campus Wifi so he doesn't change any settings, but I feel like its all leading back to that.
    Any help would be much appreciated!  Thank you!!!

    Forgetting the Network didn't work.  It's dong the same thing.
    So if it's a router problem, what can we do?
    Two devices work, and two don't...I just don't understand why.
    Could it be that too many people have logged into our wireless and now it's out of IP's? Could we ask people who have previously logged into our internet to delete it completely? I don't know if that would free anything up?

  • IPhone will not connect to home WiFi

    new iPhone 4 6.0 will not connect to home wifi--other apple products (iPad & other iPhone 4) will connect to home WiFi--I experienced this problem with first iPhone 4 received 11/13--got new phone 11/26 and STILL can not connect

    Is this a password protected network? Go to Settings, General, Reset, Reset Network Settings. After that, try to connect again. This reset will remove all password and wifi information from the device and should give you a clean start to connect to the home network.

  • MacBook Pro won't connect to home wifi, but will connect to other networks

    Help! MacBook Pro won't connect to home wifi but will connect to other networks. Others can connect to my home network. I've tried diagnostics, resetting the router, restarting my computer, and forgetting the network and then trying to access it. Nothing works.

    Hey Brittany, 
    Welcome to Apple Support Communities.
    It sounds like you’ve done quite a bit of troubleshooting to try and resolve the issue with your MacBook Pro not connecting to your Wi-Fi network. If you haven’t already, take a look at the article linked below which provides some additional troubleshooting suggestions that may help you resolve the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    So long,
    -Jason

  • Iphone 5 not connecting to home wifi

    Hi,
    I have a problem with my iPhone 5 not connecting to my home wifi. This is a recent (just today) issue, it has been connecting with no problem for over 2 years and remembering the password.
    Today
    It sees my SSID, if I click on it I get asked for the password - I enter the password (checked with my router settings and correct), and I get the message:
    "Incorrect Password for "SSID" (name changed)
    What I have done:
    1. I have rebooted the phone (failed to fix)
    2. I have reset my Network settings on the phone (failed to fix & mashed all my email settings)
    3. I have backed up my phone to iTunes (BUT NOT RESTORED IT - YET)
    4. I have rebooted my (netgear DGN1000 router) (failed to fix).
    5. I have reset my router to factory settings, and whilst set with factory resets, tried to connect my phone (phone failed to recognise the default password)
    6. I have reset my SSID and password to my preferences.
    7. I reset my wireless encryption to "disable", and get message on the phone "Unable to join the network "SSID" (the lock icon disappeared off my phone)
    8. I reset the encryption, the lock icon re-appeared, and I get message "Incorrect password..."
    9. Other items: ipad air, Kindle Fire HD, iPhone 4 - all connect to the wifi with no problems, did before and still do now.
    10 Been to the O2 store (O2 are my provider), and the phone connected to their In Store wifi with no issues (they say no fault on phone)
    11. I have rung Virgin media (my landline & internet provider) and they have checked my router settings (they are OK) and advise me they can't help with the phone as it's "..an unsupported device.."
    Stuck now! &

    zolala:
    Virgin media is my internet provider, and I have rung them too; They talked me through the router settings, but the iPhone is "unsupported".
    My router settings are correct.
    Can you explain "...are you using Apple Airport Extreme for hm network?..." please?
    raymond73:
    I have an "old Dlink GSL624" and I dug this out, but can't find the factory code for the passphrase (I had to reset to factory default)
    If nothing else works, I'll get onto Virgin media and threaten to move isp unless they send me a new router. I have been with them for - well the days of dial up - well over 10 years probably.
    I am currently restoring the iPhone to its factory default. I will set up as a new phone to test, and IF it works, I'll then restore to backup - If it stops working after this, I'll have to copy all my contacts somehow, and then start from scratch again.
    Any idea how I can copy just my contacts somewhere I can restore them from easily?
    Thanks

  • IPhone does not connect to home Wifi

    I have a wifi working but on my iphone or any other device other than a computer does not connect to home wifi. What should I do?

    Hi leilaboxergirl,
    So, when you go to Settings>WiFi, what do you see?
    Is WiFi = On?
    Under Choose a Network, is anything showing for you to select?
    Is the Ask to Join Networks button on?
    GB

  • IPod 5th Generation won't connect to home wifi?

    I've had this iPod since this summer and suddenly it disconnected from my home wifi and hasn't connected for two days now. Yes, it will connect to wifi everywhere else such as school. Although, when I come home it fails to connect to our wifi.
    I know it isn't a problem with our wifi since all the computers are still connected (along with other Apple products such as Macs and iPhones).
    It's only my iPod that won't connect.
    Every time I try to connect it says that I have failed with the password and that it's unable to connect. I have tried resetting all settings and also tried resetting my network settings...
    Any other ideas? My iPod is version 8.1

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Won't connect to home wifi?

    why won't this **** thing connect to my home network? It was working previously and now won't connect. wifi is operational with other devices. ***???

    Try Settings > General > Reset > Reset Network Settings
    If that doesn't work, cycle power on your network router.
    If neither of those work (unlikely), try resetting your iPhone.  Hold the on/off and home keys together for 7 or 8 seconds till the Apple logo appears.

  • IPhone 5s stopped connecting to home wifi. Circle just spins in settings. Already tried to reset network settings. Other apple devices are connecting just fine.

    I reset network settings. All other apple devices in home connect as intended. Circle in settings just keeps spinning next to connection but won't connect.

    I have the same problem. I connect my iPhone 5 to my home wifi (airport express) and to a MiFi Jetpack at work everyday. After about 2 days the phone will no longer connect. I just get a spinning circle next to the wifi name. The same thing will happen at home and at work at the same time. I'll reset my network settings on my phone then I can connect to both wifi spots. After another couple of days the process repeats. Obviously it is not the airport express or Jetpack since it only affects my iphone and not anyone elses and the reset on the phone fixes it.

  • Iphone 4s - cant connect to home wifi

    For months my iPhone 4s, now running iOS 6, has been having trouble connecting to wifi. It didn't bother me too much until now, when I can no longer connect to the wifi at home. I reset my network settings, but still no luck. I know the password by heart and have checked it, the password isn't the problem. It will either say "incorrect password" or "unable to connect". On my macbook, ipad, kindle, as well as another iphone in the house, there are no problems connecting to the wifi. We have fios but because of the recent storm and just regaining our internet a few days ago, I'd prefer not to mess around with the router. It is so frustrating to me that I cannot connect to wifi in my own house all of a sudden. I don't want to update to iOS 6.0.1 until I have resolved this (not to mention you need wifi to update anyway). I have seen a lot of other people complain about this iOS 6 wifi glitch, but mine started before I updated. Previously, it would not allow me to connect to most outside networks, home worked fine. Please, if you know of a solution to this problem, let me know before I go over my data plan!

    Try followings. It may help you.
    First check wifi router setting in pass key type, do the following WPA Personal, and set encription to TKIP and choose your fev SSID with your fev password. Save the setting switch off your router wait for 15 sec switch it on back. This should solve your problem. If you have linksys then 192.168.1.1 is the ip address to enter basic setup.
    Good luck.

  • Iphone 5 wont connect to home wifi- Any ideas?

    Hi- I just got a new iphone5 but it won't connect to my home wifi- keeps saying 'unable to connect to SKYXX'. I have tried restoring network settings but still no joy. Wifi on iPad and laptop working fine. Any ideas?

    Well first off make 100% sure you are using the right password   If you're completely sure then you may have an issue with the wi-fi antenna on your phone being damaged or something like that and you should take it in to an authorized apple retailer and see if they can do anything about it

  • IPad and iPhone won't connect to home network with new modem

    I had to replace a modem today and after finally getting my computer to connect wirelessly, now my iphone and ipad will not connect.  My wifi names did not change, nor did the router - just my modem.

    Thanks for the suggestion; already tried that. So I just reset the printer and, even though it already recognized my desktop and laptops, it now sees the iphone and ipad. All is well...

  • Tried everything - ipad2 still won't connect to home wifi

    Situation
    - home network wireless router is a linksys wrt54g - no login
    - other laptops connect fine
    - ipod touch connects fine
    - new ipad2 works fine on home wifi until I upgrade to ios5.0.1
    - now see three bars in the upper left next to the word ipad, with a spinning circle to the right of that when I open Safari (just hangs trying to open any site)
    - new ipad2 works fine on other wifi (office, airplane, public hotspots) both before and after upgrade
    - set to DHCP with a local IP address of 192.168.1.102, subnet of 255.255.255.0, router of 192.168.1.1,
    What have I tried?
    - turning wi-fi off and on w/in the ipad2 wifi networks screen
    - hard reset of the ipad2 (home / power until apple logo, then release)
    - network settings reset
    - forget this network
    - power cycling the router and cable modem
    - manually deleting the ipad2 from the dhcp clients table via the router admin gui
    - switching on and off airplane mode
    - adding and deleting a client id from the network screen (by default it is blank)
    Anyone have any suggestions? Thanks in advance.

    So - after spending an hour on the phone/hold with apple with no solutions - I did a reset of the router - leaving the default SSID of 'linksys' - and it now works.

  • Just upgraded to ISO8 and now my iphone 4s won't connect to home wifi - keeps telling me that the password is incorrect when it's not - help please.......

    Please help me - I've just upgraded my Iphone 4s to ISO8 and now I can't connect to wifi - was at my friends yesterday - always use his wifi and even though the password was correct, it wouldn't accept it.  Came home and had the same problem.  I can't use my data plan as it wouldn't be enough so now it's chewing through it.........The only thing I did different was upgrade......... I'm not computer savy so please leave me step by step instruction on how to fix if you can.  I've tried rebooting etc and turning everything off - no luck.......

    Have you tried resetting the network settings? Sometimes starting from scratch solves the issue and it is the simplest way I can think of that may solve your problem.
    1. Go to Settings > General > Reset
    2. Then select Reset Network Settings
    3. Enter your password when it requests it
    After the phone finishes the reset try adding your Wi-Fi again and see if that works. If not, I would back-up your phone to your computer, then reset the whole phone by following the same instructions above, but choosing Reset All Content and Settings at step two. Make sure you backup your phone first though! Otherwise you will lose all the stuff on your phone when you make this selection.
    Good luck!

  • Ipod touch won't connect to home wifi?

    the wifi was working fine until yesterday and now the connection won't even show up even though it works fine on my laptop. i've tried turning the ipod off and on, i've tried resetting the router, i've tried resetting the network settings on the ipod, still nothing. i can't do the thing where you hold down the power button and the home button because the power button is broke and the home button is almost broken as well. please help!!!

    I have the same problem. I tried restart, restore software (even though it is brand new!), reset network settings, restarted modem + router. All my other non-Apple wifi connection are perfectly fine. Just the same message: "UNABLE TO JOIN THE NETWORK".

Maybe you are looking for

  • How much can I sell this T61 for?

    Hello - I have a laptop configured as shown below. I actually got it about a month ago, there is a display problem that I have sent it into support already. I've already talked about it here: http://forums.lenovo.com/lnv/board/message?board.id=T_Seri

  • 'Use Temporary File' in Receiver File channel

    hi all, I am facing a strange issue with receiver file channel which I am not sure if somene had already faced. I couldnt find any help from blogs..! I have configured the Receiver File channel with Write mode as  'Use Temporary File'  with a tempora

  • How to maintain the data in the view cluster

    we are doing upgrade, we have one view cluster app_log in this object scwb and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb  but subobjects doesn't exist how to

  • IView Date Format

    Hi, Is there anyway of changing the format of the date in a pre-delivered iView?  Is there a setting on the portal? We have a standard of having our date in the format yyyy/mm/dd.  Some of the iViews have the format of mm/dd/yyyy.  I want to change t

  • Process Monitoring SCOM 2007 R2-Minimum Number of Processes

    I am trying to setup a process monitor with Minimum Number of Processes set to 0 but its not accepting it and replacing it with 1.Is there way I can set it to 0, tried to edit the xml as well but its not working Help would be appreciated