IPhone and now iTouch not automatically connecting
I just purchased the iPhone 3GS and tried to connect it to my MacBook and it doesn't automatically connect. I first thought it was the USB cord but I tried the cord from my iTouch which recently worked. That didn't work either so I tried to connect my iTouch and now that doesn't connect either. The cord works in my charger, but not to my computer. Why?
Try reinstalling iTunes (just download and run the installer, no need to delete anything first). If that fails, remove and reinstall AMDS:
http://support.apple.com/kb/HT1747
Similar Messages
-
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
I've just updated my iPhone and now I can't connect to my Bose soundlink Bluetooth speaker. Is this due to the update or is it my speaker?
See this thread: iTunes 12.1 Not Finding iPhone
-
I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?
To be more clear:
Was you phone hacked/jailbroken BEFORE you hooked it up? -
Pls i tried to update my iphone, but the itones can restore my iphone and now its not coming up again, it can restore and its just displaying itunes logo and USB cable, pls i need your assistance and advice.
Hello Richyfromnig,
Thanks for using Apple Support Communities.
The iTunes logo on the phone means that it is in what's called recovery mode. Take a look at this article to find out more about recovery mode, and how to fix it:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Take care,
Alex H. -
I Updated my wife's iPhone the other to the new operating system. It asked me first to use iCloud backup so I did. After the update was complete my wife can use wifi but when we try the 3G it says you are not connected to a cellular data service.
IT shows Bell as the provider but we seem to have lost something during this update.
can someone help me please.Check Settings>General>Cellular and make sure Cellular Data is set to On. If it is, try putting it in Airplane mode for 15 seconds, then turn Airplane mode off again. If it persists, give you carrier a call to confirm that it's properly activated with them and that your data plan is properly provisioned.
-
I recently changed apple ids on my iphone and now can not update or download any apps
I recently had an issue with my apple id and icould.
I deleted my original apple id and made a new one with my new email address.
I updated my phone with the info but now cannot update any apps on my phone and I cannot download any new apps?
HELP!!!!
Thank you! : )Ok...that kind of makes sense to me. I logged out and logged back in and am trying to update the apps that were downloaded under the old name.
Why is it not allowing me to download any new apps though under the new name? -
i dont not want to loose everything but it is telling me to restore and stuck in this mode....
If you have done the smart thing and backed up before your software upgrade then you have nothing to worry about.
If you didn't, well, that's a mistake you will hopefully learn from.
Best,
GDG -
I both a free iPhone, directly from Apple, I used for different time a card from Movistar, and when I want to change it to Vodafone I can't
Sorry your post doesnt make sense. Do you mean you bought an iPhone from Apple directly?
Also you say it was free which seems to me it was a replacement.
It looks like the iPhone is more than likely locked to a carrier which would mean you need to contact the carrier to unlock the phone so that you can use any other carriers sim in the phone.
hope this helps -
Occasionally my macbook, iphone, and ipad would not be connected to the internet at the same time. However, when they can connect, all three are connected at the same time. It is not my internet because my room mates computers are connected to the internet the whole time without any problems. When I can't connect, I can still see the network name on th wifi network search. However, when I click connect, the only message that pops up is can not join network.
Hi Lao3262,
Thanks for using Apple Support Communities. These articles have troubleshooting steps for issues with Wi-Fi on Macs and iOS devices respectively:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers,
- Ari -
I did an update on my Iphone and now the screen says connect to iTunes. I cannot get past this screen. Has anyone had this issue?
What version of iTunes is on your computer? What version of OS X are you running? What type of Mac (and how old) do you have?
-
I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now? It worked fine before...
natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here. -
my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do
Sorry, there is nothing you can do.
FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149. -
I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..
I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)? -
After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?
Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.
Maybe you are looking for
-
I have picked out a moderately priced camcorder (Sony HDR-CX260V High Definition Handycam) andwant to know if it produces files that easily integrate with FCP X on Lion. Thanks.
-
Updating picking qty from Shipment confirmation
Hi frenz, We got a requirement that when we get 856(shipment confirmation) from our external warehouse, we gotta update the picked quantities in delivery document and ASN has to be sent automatically. Can anyone help me on where to writ
-
SQL access to interface port descriptions or via radius request?
Does anyone know how to include port descriptions within a radius request or of a database that I can pull the information from a Using a SQL statement. We have Cisco CER, Cisco works, Cisco prime or am looking to populate my own database. Thanks
-
Is it possible to transport KM workflows using ICE?
Hi All, Is it possible to transport KM workflows using ICE. I am using offline transport. The permissions and properties are getting transfered. But the approval process which I have configured is not getting transported. Can any one tell me why its
-
Maximum number of documents knowledge directory can handle
Hi, I am wondering, what could be the maximum number of documents knowledge directory can handle in terms of indexing and search in WCI 10.0.3 release. I tried to google and also browsed oracle documentation but didn't get any clue about the number o