IPhone and windows system recovery

hi i have an iphone and i did a system recovery recently (windows xp) and i was wondering if when i connect to itunes to sync it says delete all files. will it delete my photos, contacts and notes and music or just my music

007bond,
If you put at least one contact into Outlook or Address Book, you will get the option to merge the contacts with your computer. Notes are not synced with the computer at all, so those should remain unchanged.
Hope this helps,
Jennifer B.

Similar Messages

  • Iphone and windows 8 compatibility?

    When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

    I have  no issues with Win 8 working fine with the latest (win 8 compatible )
    iTunes

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • Iphone and Windows 7 64 bit

    I am using the RC of windows 7 64 bit and I have trouble connecting my iphone or ipod. I installed the 64 bit version of itunes and it works, but it doesnt install the mobile device services and drivers as it seems. my iphone gets detected as a camera, but i can't synch it with itunes. Is there any solution to this?

    Okay, I'm throwing in the towel for now. I unplugged every USB device, turned off my Bluetooth keyboard and mouse, unplugged the wireless router and unplugged the cable, turned off wifi on the iPhone, and using a USB mouse I started iTunes. By the way, it seem to take an awful long time just to start up besides not seeing the iPhones.
    Then I plugged in my iPhone and waited. Nothing at all. No error messages but no iPhone. I turned it off and on, left it hooked up while I restarted iTunes, did a hard reboot while it was plugged in. NO reaction whatsoever from iTunes.
    Then I happened to notice that Skype was doing something in the system tray so I (for the heck of it) disabled it and immediately got the old error message that an iPhone has been detected but can't be identified.
    This eco system is too fragile. Even if I got my iPhone identified once I could never be sure that I wouldn't breathe the wrong way and knock it out again. I'm going to live with my bizarro work-around of connecting to a spare XP tower (no keyboard, mouse or monitor) that can sit on my network at home and control the iTunes sync via GoToMyPC. This was the PC I was using before the Vista machine. I guess I'm using it as a iTunes 8.2 server.
    This has to be an issue that Apple addresses in the not too distant future, one would hope. I'm going to try and wait it out.

  • Iphone and Windows XP Pro

    Hi and new to the forum. After upgrading to os 4.2 on Iphone 4, when I sync to the computer it "finds new hardware Iphone" and "finds new Digital Camera" and then the add wizard pops up and nothing is working from there and it doesn't install. There was a fix on the Apple site which hasn't worked for me to follow through the add and upgrade usb driver for apple.

    You dont have a webcam on the computer... Well I'd still check Add/remove Programs for any Webcam software.
    Alternatively it could be security software Norton/Kaspersky/NOD32/ ect...
    Something you can try is using MSconfig on the computer
    to use Msconfig on windows you would
    Click Start>Run>  in the box type Msconfig - click run or ok..
    When the system configuration utility appears you choose selective Start up - Click the startup - click Disable all.
    After disabling All items it will uncheck every item in the list. You will want to go through the list and Re-check anythign apple or iTunes/Quicktime related.
    Once you have done that click the Services tab - Click Hide All microsoft services -then click disable all.
    After you have done that same thing here look for anything Apple, Quicktime, Bonjour, iTunes, iPod related and recheck them - once you have done so click ok - the computer will prompt for a reboot - Restart the computer and test.

  • Frequently Bluescreen followed by Windows System recovery

    I have a HP Pavilion h8-1104nl HPE desktop-pc. Now for 1 month. I'm running Windows 7 64-bit.
    Frequently the system hangs at startup. I power up an bluescreen appears followed by system recovery.
    After system recovery everything works normal. But after a few days the same problem occurs aqain. The system is original. I haven't put any hardware extra in it. I checked the hardware with HP vision diagnostic but everything is running performing the it shoud. Here are a few dumps.
    112912-26785-01.dmp 29-11-2012 21:38:56 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 0000000​0`00000000 00000000`00000002 00000000`00000000 fff​ff800`02ceff74 tunnel.sys tunnel.sys+fb87a000     ​x64 ntoskrnl.exe+7efc0     8 15 7601 314.298 
    112012-26395-01.dmp 20-11-2012 7:15:30 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000​`00000000 00000000`00000002 00000000`00000000 ffff​f800`02ca5f74 mouclass.sys mouclass.sys+f60500    ​ x64 ntoskrnl.exe+7efc0     8 15 7601 273.770 
    103112-19094-01.dmp 31-10-2012 23:46:04 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 0000000​0`00000000 00000000`00000002 00000000`00000000 fff​ff800`02ca8f74 ntoskrnl.exe ntoskrnl.exe+7efc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7efc0  ​   8 15 7601 273.770 
    102912-18751-01.dmp 29-10-2012 21:33:25 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 0000000​0`00000000 00000000`00000002 00000000`00000000 fff​ff800`02cdcf74 Beep.SYS Beep.SYS+fc30af00     x64 ​ntoskrnl.exe+7efc0     8 15 7601 314.402 
    102212-18423-01.dmp 22-10-2012 9:37:55 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000​`00000000 00000000`00000002 00000000`00000000 ffff​f800`02ce1f74 ntoskrnl.exe ntoskrnl.exe+7efc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7efc0  ​   8 15 7601 314.402 
    101712-19453-01.dmp 17-10-2012 7:49:32 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000​`00000000 00000000`00000002 00000000`00000000 ffff​f800`02ca8174 ntoskrnl.exe ntoskrnl.exe+7f1c0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7f1c0  ​   8 15 7601 273.770 
    Maybe someone knows if it is an hardware problem or a software problem?.
    And is there a solution for this problem.?
    I am looking forward to your reply.  (help).
    kind regards, ma2ling

    Hello ma2ling,
    With the ntoskrnl.exe crashing I am thinking this is software / driver that is causing your problem and that your hardware is likely fine.
    The first thing we should do is run the system file checker to check the integrity of the system files.
    1. Click on start
    2. Type CMD and right click on run as administrator
    3. In the CMD prompt type "SFC /scannow" (without the quotes)
    Note: There is a space after SFC and before the /scannow
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi,
    Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
    'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
    I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
    I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
    Microsoft Windows 7 x64 Business Edition (Build 7600)
    Gigabyte Technology Co., Ltd. P55-UD6
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E400D*7E1<Edited by Host>
    Current user is an administrator.
    The current local date and time is 2009-10-23 19:56:37.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5800 Series
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: cecad029456cdd284aef514988f34808
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
    Connected Device Information:
    iPhone, iPhone 3GS running firmware version 3.1.2
    Serial Number: 88924**3NS <Edited by Host>
    Most Recent Device Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.1
    Serial Number: YM937**72D <Edited by Host>
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
    I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
    I am not sure what to do now....

    Well, the new gigabyte bios fixed the issue.

  • Iphone and Windows Vista problem

    Okay, so I have windows vista and the iphone seems to be having a hard time with that.
    When I plug my Iphone into my computer it recognizes the apple device and asks if I want to import picture. In itunes it shows the button that the Iphone is plugged in and synced, however, when I press that button nothing happens. I can't add any photos to it because everytime I try there is some kind of error. What can I do?

    Same exact problem!
    Upon returning home after picking up the long awaited iPhone 2, I discovered that my iTunes and/or Windows Vista would not detect the iPhone, and I’ve been searching the Internet for a solution since (going on day two now). Apparently, Vista and the latest iTunes have had this problem quite a lot.
    It’s really a shame, as I think Apple is missing a singular opportunity to use the iPhone as a transition drug to more Apple products. I for one have been looking for a reason to dump my Dell and pick up a MacBook Pro, and the iPhone seemed to be it.
    However, if I get caught in the middle of a ******* match between Apple and Microsoft, well, they both lose.
    When you spend this kind of money, it is imperative that the thing works out-of-the-box. I will never purchase a Dell again for just this reason. Now, if I purchase a Lada, well, I'm expecting to put in some hours and blood to get the thing air born, but an Apple product? No way.
    Please help me become an Apple customer.

  • Sync outlook with Iphone and windows 7 64 bits

    Hello,
    I have a new computer (HP DV7 3080ef) with windows 7 64 bits, itunes 9.0.2.25 and one iphone 3Gs 3.1.2.
    I succeed to import from XP 32 bits my library on my new pc, including my outlook (2007) file.
    I can synchronize my computer with iphone, thanks to this forum for the help, but only my outlook data are not transferred from pc to iphone and iphone to pc...without any error message and during the sync process, on the header of itunes we can see the sync for calendar, contacts and notes...Other topics are syncronized without prob.
    I am totally lost and would like to continue to use my iphone as I did with my old XP computer.
    thanks for your help
    Herve

    ok I succeed. Maybe it can help somebody. solution is to recreate a new PST file, copy and paste all folders form old to new one (contacts, calendars, notes etc...). Then in outlook open Tools/options/data file, and select the new one as default file.
    sync now works, I can use my precious with my laptop.
    Hope this topic will help.
    Greetings seasons to all.

  • Iphone and windows media player

    I just got the new iphone and would like to load songs from my pc which is windows xp pro. I have windows media player 11. The player does not recognize the device when hooked up. Hope there is an easy solution.

    Hi Dean and welcome to Discussions,
    to use you iPhone with a Windows PC you have to use iTunes for Windows http://www.apple.com/downloads/macosx/apple/windows/ and also get the iPhone Configuration Utility from there.
    The Windows Media Player is not supported with the iPhone (see requirements here http://www.apple.com/iphone/specs.html )
    Regards
    Stefan

  • Iphone and Windows 7

    I have no trouble with itunes. I had no trouble seeing and connecting both laptop and iphone with VISTA.
    In Windows 7 the laptop pairs with the iphone fine but will not connect with it.
    I have gone into network settings and it just will not connect. I have the exclamation mark in device manager but i had that in vista as well.
    Can anyone connect with Iphone in Windows 7 to use the laptop speakers etc.
    Thanks for any help.

    I have only noticed the iPhone being the primary speaker when I connected any BT tongle to my computer and not the other way around. You can attach a 2.5mm cord to the PC and iPhone and that will work, but to make the iPhone play into the Sony via BT I don't recall there being a way.
    You can purchase a BT Stereo Headphones deal and hook up a BT dongle to the PC and pair both the PC and iPhone and it will work that way. Only problem is only one device per headset can be used at once.

  • Network drivers not working and Windows Error Recovery Message issues

    I have a ThinkPad laptop T530 series in which about five of my network adapters are showing the exclamation mark in a yellow triangle next to them. When clicking on properties, it states that" this device will not start--code 10." I have tried the network sharing troubleshooter and this has not worked.
    The second issue I am having is that upon starting my computer I am constantly getting a Windows Error Recovery message which I have to press on the proceed to Windows as the startup repairs do not seem to rectify the issue.
    I would very much appreciate if someone could help me resolve these issues

    I don't have a solution to your main problem, but I have one for the error message.
    If I am right, then Airport is causing the problem. 192.168.1.1 is the address that the Airport Base Station will take right away. To fix this, you need to go into Airport Admin Utility. Click on your base station and click "Configure." Click on the "Network" tab. Now it should look something like this:
    http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture2.png
    The problem is that the Airport is using the same IP number set as the router that you have. If you disconnect or unplug the Airport, then that would fix it easily, but if you want to keep your Airport connected, then all you need to do is pick one of the other number formats, like this:
    http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture4.png
    Now, I'm no expert on this stuff, but from what I understand, this could get you one step closer to your destination. Good luck!

  • Syncing Google Calenders in IPad Iphone and Windows PC

    I have a google mail account on my Ipad Iphone and my Windows PC. When I make an entry on the Google Calender on the PC it syncs successfully to my IPad & Iphone. If I make an entry to the Calender on either my Ipad or my Iphone this info does not get synced to my Google Calender on my PC. Why please

    Hey fleegreen,
    Thanks for using Apple Support Communities.
    Both of these will help you setup iCloud on iOS devices and on Windows.
    iCloud: Set up iCloud on your devices
    http://support.apple.com/kb/PH2609
    http://www.apple.com/icloud/setup/pc.html
    Have a nice day,
    Mario

  • Will Iphone and windows calendar ever sync.

    Will Iphone and the calenar in Windows Vista ever be able to synce? or will Iphone continue to make you use Outlook?

    rvrsmtns wrote:
    My real dissappointment is with Apple Support...they should be more upfront on an issue this big...just say it...the iPhone calendar will only sync with Outlook 2003 & 2007 but NOT with its Vista successor "windows calendar".
    They do say it. From the iPhone Get Ready page:
    +iPhone uses iTunes to sync with the calendar application you already use on your computer — iCal or Entourage on the Mac, or Outlook on a PC+
    http://www.apple.com/iphone/easysetup/getready.html
    No mention of Windows Calendar.
    Message was edited by: Ansuz82

  • Iphone and Windows 7 problem

    I recently updated the operating system on my desktop from XP to Windows 7. I listened to someone who assured me that you did not have to backup my system before I did the install (my bad).
    I downloaded Itunes to my desktop again but it does not recognize my iphone. I don't want to loose all my musics and apps.
    Can anyone help me with a fix to this? Please.

    You should be maintaining a backup of all the important data on your computer's hard drive including your iTunes library regardless if installing a new Windows version and especially before doing so. Maintaing a backup is important regardless the platform but even more so with Windoze due to constant virus, adware, and spyware concerns.
    Check this link for an iPhone not being recognized with Windoze.
    http://support.apple.com/kb/TS1495
    After you get this resolved, your iPhone will be erased of all iTunes content with the first sync and the same for any photos transferred from your computer to your iPhone if this is selected under the Photos tab for your iPhone sync preferences.
    iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iPod or iPhone, but this is for iTunes content that was purchased/downloaded from the iTunes store only.
    First you need to re-authorize your computer with your iTunes account with iTunes. With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.

Maybe you are looking for

  • New to Mac....lots of help needed

    How do I take a list in an existing doc and make it into 3 columns (in pages)?

  • Warning message in IT0021

    Hi experts, When i create, change or display the record in IT0021with any subtype, it shows warning message "Assignment to feature P0021 did not take place ", what does it mean? what will happen if i ignore this message? where it will going to effect

  • Can I share icloud drive storage between family members?

    I am looking for easy offsite storage that can be easily accessed.  I have been reading a bit about the icloud drive, and it seems simple to add and open files. Can I share the storage with my husband and his computer or not?  We currently use carbon

  • Had to restore ipad and all apps are missing in app store

    My daughter was locked out of her ipad by a friend.  I had to restore her ipad.  I was able to download all of her music from icloud but all of her apps are gone.  When I go to the app store it says that she hasn't purchased any apps.  How can I get

  • Significance of BEx Reporting flag in ODS objects

    Hello Masters, I would like to know in detail, the Significance of BEx Reporting flag in ODS settings. What happens if we flag, and hat happedn when we dont ? If, Transaction Data is loaded into the ODS,  without loading the relevant Masterdata in ad