Iphone and Windows Vista problem
Okay, so I have windows vista and the iphone seems to be having a hard time with that.
When I plug my Iphone into my computer it recognizes the apple device and asks if I want to import picture. In itunes it shows the button that the Iphone is plugged in and synced, however, when I press that button nothing happens. I can't add any photos to it because everytime I try there is some kind of error. What can I do?
Same exact problem!
Upon returning home after picking up the long awaited iPhone 2, I discovered that my iTunes and/or Windows Vista would not detect the iPhone, and I’ve been searching the Internet for a solution since (going on day two now). Apparently, Vista and the latest iTunes have had this problem quite a lot.
It’s really a shame, as I think Apple is missing a singular opportunity to use the iPhone as a transition drug to more Apple products. I for one have been looking for a reason to dump my Dell and pick up a MacBook Pro, and the iPhone seemed to be it.
However, if I get caught in the middle of a ******* match between Apple and Microsoft, well, they both lose.
When you spend this kind of money, it is imperative that the thing works out-of-the-box. I will never purchase a Dell again for just this reason. Now, if I purchase a Lada, well, I'm expecting to put in some hours and blood to get the thing air born, but an Apple product? No way.
Please help me become an Apple customer.
Similar Messages
-
Dreamweaver and Windows Vista Problem
Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
TextHello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve -
ITunes and Windows Vista problem
I have Windows Vista and ran iTunes successfully for 8mos. Now I'm getting a message box that says "iTunes has stopped working. Close box and Windows will send a solution." The solution, upgrading Windows, doesn't work. Is Vista the problem?
Scan and Fix windows System files:
Can you go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair or update files.
Start iTunes again -
Zen v and windows vista problem, can you hel
??Hi, We just got a new pc os windows vista. Won't recognize my daughters zen v I got her for xmas, I've tried drivers, firmware update, uninstalling-reinstalling , no joy, I'm an amateur pc user but usually manage to install hardware, I loathe not getting a result after hours, days now weeks?of trying. Can any knowledgeable person please tell me where I am going wrong?
?Hi, no there is no error message, it's been a while since I tried to install it with the disc, it all went ok seemingly but when I went to start transferring files and plugged the player into the usb port( tried more than one)the pc just won't recognize the player, says ' no player has been detected, plug your player in'?It did the same with our printer and I tried for ages to get it to work, ended up getting a new cheap printer as my daughter needs it for her prelims. So rubbishy as I'm super skint and our printer worked fine on xp.
-
Unknown Device ipod Classic and Windows Vista problem??
Help!! My ipod Classic is not being recognized by my computer. I have read the previous articles and tried the solutions but I continue to get the result "Windows has determined that the driver software is up to date" I continue to get the error noise when I plug the USB in and the Device manager continues to say "Unknown Device" It seems others are having this problem, how do I fix this?
I am having the same trouble with mine, and I can say that it isn't iTunes, I plugged my brothers iPod Nano in and it worked like a charm, but when I plugged my iPod Classic 160g in all it says is it is an "unknown divice". It isn't Vista either as the same thing happens on XP Pro as well, so all I can think of is it is a error on the Classic itself. I just wish someone can help out so that I can use my ipod!!!! Come on Apple!!!! Solve this problem!!!!
-
I recently updated the operating system on my desktop from XP to Windows 7. I listened to someone who assured me that you did not have to backup my system before I did the install (my bad).
I downloaded Itunes to my desktop again but it does not recognize my iphone. I don't want to loose all my musics and apps.
Can anyone help me with a fix to this? Please.You should be maintaining a backup of all the important data on your computer's hard drive including your iTunes library regardless if installing a new Windows version and especially before doing so. Maintaing a backup is important regardless the platform but even more so with Windoze due to constant virus, adware, and spyware concerns.
Check this link for an iPhone not being recognized with Windoze.
http://support.apple.com/kb/TS1495
After you get this resolved, your iPhone will be erased of all iTunes content with the first sync and the same for any photos transferred from your computer to your iPhone if this is selected under the Photos tab for your iPhone sync preferences.
iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iPod or iPhone, but this is for iTunes content that was purchased/downloaded from the iTunes store only.
First you need to re-authorize your computer with your iTunes account with iTunes. With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone. -
ITunes iPhone and Windows Vista - Syncing Issue
I was trying to upload 2 new albums I have and it seems it re-synced my whole music library to my iphone.
Is there a video or something I can watch that shows how to use iTunes correctly, and to sync new songs without having to re-sync the whole entire library to my iPhone.
Thanks.
Black MacBook, 2.0GHz Core Duo, 1GB Ram, 80GB, Superdrive Mac OS X (10.4.10) 8GB iPhoneThere really isnt much to syncing music. I have read several posts of folks complaining that making a simple change to one song caused the entire library to resync.
Suggestion - turn off automatic syncing when you plug your iPhone. Then choose Sync only selected items, and then select all your music. Sync. Then make a change to one song and manually sync again. See if only that one song syncs. -
Has this ever happend to anyone, i bought a new computer in Janaury plugged in the iphone after itunes and my ipod had already worked correctly. Then once the iphone was syncing the dreaded "blue screen" popped up. My computer crashed losing everyithing I had just put on it, after many frustrating phonoe calls to Dell, they finally sent out a new one - because nothing they did could fix it.
So here I am with this new computer it has been working fine for the past 5 months, but I am very leary about hooking up the iphone.
Should I be this nervous about hooking the iphone up? THe itunes and ipod are working just fine.
Basically I have been just using my old dog of a computer for updating the iphone software.
I guess it serves me right for not converting to an Apple/Mac!KTP1971,
If you get a blue screen when you connect an iPhone with pictures taken on the iPhone, it can be a conflict with the drivers for a webcam or scanner.
This article has more information:
http://support.apple.com/kb/TS1502
Hope this helps,
Nathan C. -
I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {92497F93-8A79-419C-AA27-50CD2F263F77}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description: Dell Wireless 1397 WLAN Mini-Card
IP Address: 192.168.0.118
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Tue Apr 17 16:59:28 2012
Lease Expires: Wed Apr 18 16:59:28 2012
DNS Servers: 192.168.20.254
192.168.30.217
Adapter Name: {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Is Verizon going to acknowlege the problems with FIOS and Windows Vista
For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001 -
iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!
I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!
-
Is there a fix for the incompatibility between itunes and Windows Vista?
I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?
Hey Don,
What exactly happens after you install iTunes? Do you see an error message?
This article describes device filter issues that can be caused by application conflicts:
http://docs.info.apple.com/article.html?artnum=305422
Jason -
Ipod nano first generation and windows vista
I finally got everything to work right with Itunes and Windows Vista except one minor problem.
On my ipod, the blue "dot" does not show up when a podcast is new, so in a long lists of podcasts, I can't tell which ones I already listened to.
Is there a way to fix this?
Thank you, DebraI have a new ipod nano and can not download iTunes to Winnows Vista.
Need all the help that i can get. Thanks,
Capt g -
Audigy 2zs Gamer and Windows Vista / Windows 7
.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.
Maybe you are looking for
-
Add filename and path into PDF-form
Hello, I create different PDF-forms for our company with LiveCycle Designer 8.2.1 . Now I have to integrate the name of the form-file and its path automatically into the form. My idea is to place a text-field, I will give the type "calculated" in the
-
Hi, I am prasanna.Please any one help me how to write case statement in dashboard prompt sql results. Thanks inadvance prasanna Undapalli
-
Hi experts, I tryig for line feed in the Text file. I'm using CL_ABAP_CHAR_UTILITIES=>NEWLINE. example CONCATENATE lv_tmp_str wa_notes-tdline cl_abap_char_utilities=>cr_lf INTO lv_tmp_str. it showing error,
-
How do i switch from Australia store to Canada
I recently moved from Australia to Canada, how do i switch stores and still use the same apple ID? Also overtime i logged on to the Aus store from canada, I was charged a dollar? WHY and HELP!
-
Will i lose some of my apps that maverick does not support
I went to download maverickand it said it would not support my apps like microsoft word, excel, and QUICKEN. DOES THAT MEAN I WONT BE ABLE TO USE THOSE APPS??