Iphone audio issues ironed out yet?

Hi
Have the newer models had the audio issue sorted were by recording video with all the volume and playback levels up high records a high pitch sound into the audio track of the video? or the speaker produces a high pitch noise after sounds like lock unlock and sending sms sounds?
Only I have a recent model week 33 and this is doing the same is this a fix for 3.1 we are waiting for or is it luck of the draw that some don't come with it?

I don't have such issues with my week 23 3GS. I think only Apple could answer your question and unless it's a universal problem (apparently it is not), I doubt you'll get an answer -- and certainly not one in this user-to-user forum.
Phil

Similar Messages

  • Iphone Audio issues

    The speaker of my iphone randomly stopped working today. I was listening to music when it sputtered a bit and went silent. The only sounds that work is the actual phone. I can talk fine, but my ringtone wont play and i cant listen to anything without headphones. Ive restarted it a bunch of times, and tried plugging and unplugging a headphone jack.
    Any suggestions?

    If no change after inserting and removing the earbuds several times in a row, powering your iPhone off and on, and/or an iPhone reset, sounds like the switch mechanism is stuck that is supposed to switch from the earbuds to the external speaker after removing the earbuds.
    If you live near an Apple store, you can make an appointment to have this checked and maybe fixed.

  • Pioneer FH-8000BT Car Radio & iPhone OS 3.1/3.1.2 Bluetooth Audio Issue

    I have a Pioneer FH-8000BT Car Deck that has Bluetooth (http://bit.ly/4c7ofq).
    I have an iPhone 3GS 32GB unit that came with iPhone OS 3.0 on it with Firmware 04.26.08.
    I upgraded to iPhone OS 3.01 when it came out and all was fine (the baseband was unchanged)
    I upgraded to iPhone OS 3.1 while keeping Baseband at 04.26.08 using methods that shouldn't be discussed, and while the upgrade went perfectly fine, my audio between the deck and the phone now gets garbled for both me and the person on the other end. The audio compression issue occurs every 30 seconds - 2 minutes and lasts for about 5 -15 seconds and repeats itself during the call. Kind of annoying right? You bet! I have to put the phone on speakerphone to talk to someone. I won’t be able to do that much longer because as of October 26th that will be against the law here in Ontario. All devices in the car must be hands free.
    Recently, I upgraded to iPhone OS 3.1.2 and upgraded the Firmware to 05.11.07 to see if it would make a difference and it made no difference - I still had BT compression issues.
    I have tried with another iPhone (a 3G model) running 3.0 -> No problems with BT audio compression there...
    I've even swapped out the deck with another one - but I have yet to attempt a 3.1 or higher OS.
    Pioneer told me that they were hearing reports about this deck with the iPhone, but they never heard about the technical details I gave them. No word about a firmware upgrade, or a fix for this from them.
    I've had my phone swapped out at the Apple Store here in Toronto, and I had OS 3.0 on it which I don't think I'll be upgrading at this point because of the audio issues. So, I am stuck at OS 3.0. Unfortunately some Apps I use are now becoming a minimum requirement of OS 3.1 - par for the course I guess?
    I'm very curious what changed in OS 3.1 since 3.0/3.0.1 for the bluetooth...
    Does anyone know?
    Just wondering if anyone else out there has this deck and has a problem?

    You can get the Bluetooth Audio streaming working? I can't get that to sync up properly. sigh ...
    I called Apple and they documented everything for me ... Case # 140385552
    If you can do a test call for me that would be amazing! Just keep talking ... you should be able to hear the audio compression problem (and so should the person you're talking to) ...
    Glad to hear there's someone out there who has the same deck as I do.
    Also find out if your callers hear your alternator whine when you drive ---
    I get that problem too but that's wiring / deck related. A ferrite core should solve it but I can't be bothered at the moment.
    You using the usb cable at all or using bluetooth to stream?
    I'm using the USB cable. I can get the audio to pause and play using USB cable.
    Again, I'm unsuccessful with the BT Audio Streaming part.
    Message was edited by: Cory Megitt

  • My iPhone 5 is suddenly having audio issues through the headphone jack.

    So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
    Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
    Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
    I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

    Do the new iMacs have digital audio out through the headphone jack?
    Yes.
    http://support.apple.com/kb/SP576

  • IPhone 5 audio issues on calls with a headset

    My new iPhone 5 has audio issues when I am calls with my wired apple headset. The caller cuts out like it having low reception. The ends of words and phrases are dropped as well as soft spoken words. Music works great through the headphones. Calls sound great on the handset just not on headset. Tried different headset. Still not working.
    Any solutions?
    Tim

    The (same) problem exists when using the original Apple headset, which belongs to iPhone 4S, as well as using the Sennheiser MM30i. The new EarPods are the only ones that seem to work properly.
    In addition to that, both headsets work perfectly well, when connected to iPhone 4S.
    Eventually, both iPhone 5 itself and SIM card have been exchanged by the provider. Unfortunately the problem still exists.

  • HT4946 audio issue with iphone 4 with video recording

    audio issue with iphone 4 with video recording

    http://www.iphonebackupextractor.com/
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • IPhone 5 audio issues when paired with surround sound via Bluetooth.

    iPhone 5 has developed audio issues since ios7 updates when its connected to surround sound system via Bluetooth. Audio jumps and skips in erratic and unpredictable manner on music app and worse on third party apps such as YouTube  . Have restored phone from factory settings etc. Have also checked surround sound for fault with Bluetooth; iPhone 4 ios7 works fine, android works fine but newest iPod touch with ios7 appears to have developed same issue as iPhone 5 since ios7 updates. Advise people to check for this issue on their Bluetooth devices and any advice would be appreciated on this issue  :) 

    Hey there Vxas,
    It sounds like you are gettings some very unexpected behaviour from the iPhone to your bluetooth surround sound system. I would try the troubleshooting recommended in this article:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Check that you are in range of the Bluetooth device with which you are trying to pair your iPhone, iPad, or iPod touch. Most Bluetooth devices have a range of approximately 30 feet.
    On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your device to attempt to connect it.
    Tap Settings > Bluetooth and turn Bluetooth off and then on again.
    Make sure that your Bluetooth accessory is turned on and fully charged or connected to power.
    Restart your iOS device.
    Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap and Forget this Device. Try to pair your Bluetooth accessory again.
    Note: You may need to re-enter your Bluetooth accessory PIN if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
    Restart your Bluetooth accessory by turning it off and then on again1.
    Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
    If your Bluetooth accessory has upgradeable firmware, check to see that you have the latest version1, 2.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • IPhone 4 sound issues (only out of one ear bud)

    I've tried multiple headphones/ear buds and I can only hear music out of one side. This is obviously an iPhone 4 issues considering the headphones don't work on it but work on other stuff.
    Any ideas on how to get this fixed? I got this phone less than a month ago (no protection plan and I refuse to call Apple because they know nothing. I've gotten more help on THESE FORUMS than I have through their phone line.)

    I refuse to call Apple because they know nothing.
    Huh? Perhaps you just had a poor experience but I have always been very impressed with Apple Care on the phone. Just try to escalate to tier 2 and the engineers if the first person cannot resolve.
    In terms of the issue, try blowing compressed air into the jack. It is possible the jack is faulty somehow so also stop into the genius bar, they might just swap it out for ya.
    SM

  • Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

    Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
    PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

    I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
    What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

  • Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Try this:
    Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
    If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse.  ONce the computer starts up again, wait for the pop-up looking for a mouse.  Turn on the power to the bluetooth mouse.  It should work normally now.

  • Iphone audio imported into iMovie 11 is out of sync and sped up

    When I import video from my iPhone 4S and 5 into iMovie the audio is 'sped up', i.e. everyone's voice is higher pitched and the audio is noticably out of synce after just a few seconds and then the audio runs out before the video clip stops playing. You can see this in the image where the waveform stops before the video stops.
    When I import it from my AVCHD camera everything is fine.

    Exactly the same here. It starts fine for about a minute and a half, but then it slips and gets progressively worse.
    It's making me really mad too, because I can no longer just turn on iSight and record. I have all the latest updates, in fact I just did the main system update today as well.

  • Audio only comes out of the right head phone on my iPhone 4?

    I've just bought an iPhone 4 16GB off a family friend and the phone was in fully working order, I've seen it and used it. It's been restored back to factory default and now audio only comes out of 1 head phone through  the audio jack? I've checked inside the jack for anything in there and I've used 4-5 pairs of head phones I know are working having used them in other devices. I've used this phone in the past with the head phones so I know it does work. I've tried doing a reset, same problem still occurs. Any idea's at all?

    - Try cleaning out/blowing out the headphone jack.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. If not under warranty Apple will exchange your iPhone for a refurbished one for:
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    Apple Retail Store - Genius Bar
    There are third-party places that will replae the jack for less. Here is one.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Use bluetooth headphones instead.

  • My new iPhone 5 just blacked out and won't come on. Does anyone know if I will have an issue with Verizon getting a new phone?

    MMy new iPhone 5 just blacked out and won't come on. Does anyone know if I will have an issue getting a new phone from Verizon.? I can't even call because I don't have a phone!

        Ebony,
    Let's see if we can't get this phone working for you! What exactly is happening with the device? Is the screen just out and you can hear that it will still ring, or is the phone completely dead? Please elaborate more on what you are experiencing.
    SandyS_VZW
    Follow us on Twitter @VZWSupport

  • Has the iphone pro came out yet? Is it new or  old?

    Has the the iphone came out yet? When will it? I have seen epics of it just don't no when it will come out.

    Sorry Mitchell,
    Unless your from the future I don't think that there is or will be an iPhone Pro but if you want to fantisise over it check this out.
    http://www.yankodesign.com/2012/04/02/iphone-pro-is-unbelievably-good/
    Mod Zaros

Maybe you are looking for

  • Error while running DOS command in Java

    Hi all, I use "runtime" class to execute a DOS command "copy C:\\pathname\\*.* C:\\backupPathname\\". But I saw an error msg "CreateProcess: copy C:\pathname\*.* C:\backupPathname\ error=2". I did create a folder C:\backupPathname\ before running the

  • Not getting dac email alerts

    I have setup 2 email recipients in the dac to receive notifications for ETL success or failure, level 5. Both addresses receive the test email when sent, but no etl notifications are received by either. Has anyone seen this problem before, or have an

  • Servlet redirecting at Server side

    Hi, I need to redirect to a Servlet on another Servlet. response.sendRedirect("http://www.xyz.com/servlet/customerserviceServlet.TestServlet.do"); I need to pass some request parameter. I know one method is to pass the parameter through the URL. Howe

  • Dynamic Line chart

    Hi every one, me new to flex, i want to know one thing that can we make line chart to be varied dynamically such that it must varie just like in task manager the cpu history line varies ,if its possible please give me an idea or any code if possible.

  • Email view problem.  Preview is fine, header information is good, actually message is blank?

    iPad email view just went blank.  Left column Preview is fine, all the header info for message shows up fine, but actual message is blank?  If I try to pinch message to shrink or enlarge, scrambled image and black box may or may  not occur.  Was work