(iPhone) audio recording max. frequency?

Hello,
What is the maximum audio recording frequency on iPhone?
I suppose 96kHz is not possible but how about 44.1?
I only need mono/8-bit recording. 16bit would be bonus but not necessary.
Thanks.
-mcMike
Message was edited by: mike.mcfin

Look at the SignalScope app, I believe they have the specs. Supposedly the regular phone mike is filtered above 8khz, but I think the headset mike/audio in may go up to 44. I think the recorder sample app used 16-bit at 44.1 or 48.

Similar Messages

IPhone Audio Recording Timing Issues

Hi, I recently recorded a concert and also had someone filming on an iPhone. I'm syncing up the tracks now and I've found that the iPhone gets out of sync every 30 seconds or so. The iPhone recording seems to be a little slower than the actual recording. I can fix it by just splicing the iPhone file every 30s and realigning it, I'm just wondering why this happens. Thanks!

Look at the SignalScope app, I believe they have the specs. Supposedly the regular phone mike is filtered above 8khz, but I think the headset mike/audio in may go up to 44. I think the recorder sample app used 16-bit at 44.1 or 48.

I tried to delete an audio recording on my iphone and pressed edit configure and now am locked out of it

I tried to delete an audio recording from my iphone ipod and pressed edit and got a message saying configur ipod I did this and now I am locked into only one topic and recording. Now after a couple of hours I cannot get into my ipod at all.
Can anyone help. Thank you.

Hi,
I tried to log in to iCloud but a message appears telling me I "can't sign in because my account was disabled for security reasons....reset password at iforgot.apple.com". I don't know why this happened.
I reset both my Apple ID and password.
When I tap Settings iCloud is listed on the left side between General and Mail, Contacts etc.
Tapping iCloud brings up a log in screen for iCloud which shows my old Apple ID and requests the password. If I put the password in I get the message as above.
If I use the new Apple ID/Password I get the message "the maximum number of free accounts have been activated....
In settings there is no option to "Delete Account"
Any suggestions??

Does the iphone 3GS record stereo audio?

Does the iphone 3GS record stereo audio? or is there a way to record the audio in stereo

The iPhone is not capable of recording stereo audio, stock. There is only one microphone.
See my post above for what you need.

App for making And splitting audio recording (iphone 4)

Is there a good app for making AND splitting an audio recording?
I just want an app that I can use at work to record meetings and interviews.
And when I am done listening to half of a track, I want to be able to split it and delete the first half.
A search of the web was not useful.
Any recommendations?
Thanks.
mac

Hi,
It is possible to limit the app to specific device features. For example if you require camera access or better graphics support, you can use UIRequiredDeviceCapabilities and add it to your -app.xml file.
Here's info on what values you can set for this key: http://developer.apple.com/library/ios/#documentation/General/Reference/InfoPlistKeyRefere nce/Articles/iPhoneOSKeys.html
Within the -app.xml file there is a tag called <iPhone> and inside there is another called <InfoAdditions> There you see where it sets the value for UIDeviceFamily. Below the UIDeviceFamily tag you can add the UIRequiredDeviceCapabilities tag.
For example if you require front camera support you would add:
<key>UIRequiredDeviceCapabilities</key>
<dict>
<key>front-facing-camera</key>
<true/>
</dict>
Note that when you edit the -app.xml file, it may be overwritten if you use something like Flash CS5 extension where it updates the file when you change values in the iOS properties panel.
Good luck,
iBrent

What is the best audio or voice audio recording app for iPhone 5 because I want to record audio at a book signing event this coming Tuesday!!!

What is the best audio or voice audio recording app for iPhone 5 because I want to record audio at a book signing event this coming Tuesday!!! Please get back to me as soon as you can! Thanks

Ok sorry to bug ya again but if I use the voice memos app if I have the screen locked and just on my belt clip on my side of my pants will it still pick up the authors voice and do I need to have all the volume turned all the way up for it or do I get the app u said for better sound?

16 bit 48Khz audio recording on iPhone?

I am looking for an audio recording App that records audio in 16bit 48Khz quality. Does anyone know if it is possible, if so, what App does it?
All the Apps I have seen to record Audio only go up to 44.1Khz.
I thought I saw one somewhere that did it, but I can't find it now.
Cheers,

You need to change the length of the song sections and turn on "automatic" for your recording, see this Help page: http://help.apple.com/garageband/ipad/2.0/index.html#chs3c3ef5dc
Change the length of a section
Open the song section controls and tap the section you want to change.
Tap the up or down arrow next to Manual to lengthen or shorten the section incrementally by bars. You can swipe vertically to change it in larger values.
If you want the section to match the length of your next recording (to the nearest bar), turn on Automatic before you record. This is especially useful when recording improvisations or longer parts. The Automatic option is available only for the last (rightmost) section in a song.
Tap anywhere in Tracks view to close the song section controls.
When you shorten a section, any regions extending past the end of the section are shortened. When you lengthen a section, all regions that extend from the beginning to the end of the section now loop to the new end of the section. A section can be any number of bars, and the overall song can be up to 320 bars long.

Lapel Microphone with a Digital Audio Recorder?

I am looking for a device that would look a lot like the microphone and transmitter portion of a wireless microphone system.
Instead of the transmitter unit there would be a smaller digital recorder.
For wedding videography I put a traditional wireless lapel microphone on the groom and connect the receiver to my camcorder.
Sometime there is noise and/or cutouts in the audio from this system.
I know it is possible to take a digital audio recorder (DAR) and connect a pre-amped lapel microphone to it but the DAR has a useless microphone on it and the pre-amped lapel microphone is heavy and clumsy.
All this has to be stuffed into the groom's pocket.
It would be great if there were a plain wire lapel microphone and a small recorder unit that you could set to record and let the groom go about unencumbered before the ceremony.
During editing you can sync the groom's audio with the ceremony video if you have remembered get the system back from him.

Do you believe that my AZDEN 35BT system is not up to the task?
I was in the balcony of the church about 100 feet from the groom with a straight line of sight to him.
There were some noise and cutouts in the transmission
I thought it might have to do with the officiant's transmitter in close proximity to the groom.
Maybe I could have adjusted the frequency before the ceremony.
I would have to find the priest, get him to fire up his wireless microphone system, and then holler up test adjustments to someone manning the receiver end.
Rather than using an iPhone how about a less expensive iPod touch?
I found an external microphone for the iPod Touch.
Amazon.com: SIMPLE LAV- MOBILE Omnidirectional Lavalier-Lapel Condenser Samsung Galaxy, Apple iPhone-iPad Mic, Super Qua…

How do I get the line-in to record low frequencies?

The iPhone with GarageBand is potentially one of the most powerful tools for mobile recording ever. Unfortunately there are several tragic yet avoidable drawbacks that reduce it to nothing more than a mere toy. 1. You can't use the camera usb adapter to bring in loss-less digital stereo input. 2. Even if you could, you can't split the stereo into 2 seperate mono tracks. And to take the cake... 3. You can't do much recording with the 3.5 jack's line-in because you get ABSOLUTELY NO LOWS! This is due to the iPhones roll-off low frequency limiter filter, which i'm told since ios6 can possibly be disabled, though it's not in the Settings and i have yet to find an app that will do it in the background while running Garageband. Sure, the Garageband app could do that, but then it would be a powerful incalculably valuable tool in the hands of everyone. No lows means no drums, no bass, and vocals that sound like...well...like they were recorded via telephone. Yes, it's painfully clear you recorded that demo on a phone, because when you play it back in your home or car it sounds like your listening to someone play it for you on the other end of a phone call. There is no adjustment to compensate for the absence of low frequencies. SOMEONE PLEASE TELL ME I AM WRONG and that you have a work-around or know of something I've missed. How do you get lows into Garageband???

Thanks for the info. I am not wanting flat stereo nor digital input from the 3.5. Only wanting flat mono. But before I go the apogee route (which is a $150-200 solution, not to mention a solution that will add more devices to the connection and thus more opportunities for noise), I will probably just resort to purchasing an ipad (can get a mini for $299) . My mixer has usb out, and I can go straight into the ipad digitally with the usb camera kit, albeit I still can't split 1 stereo channel into 2 mono channels. But I digress: my entire purpose for this post is that i would like to stay as mobile as possible by using the iphone, but with all the darn limitations imposed by no one other than Apple, what could be an easy way to record has been nullified. What's frustrating is that all the components are there and I have them, all the hardware is more than capable; but in both cases (the 3.5 mono or the usb stereo) there is a software feature (or lack thereof) blocking me.
Again if anyone knows of an app that will disable the software low-cut, please respond...

Set audio record path

setting audio record path?

Let me guess - your tempo's set to 120 and 4/4 time, right?
The limit is on the number of quarter notes Logic can handle (8550).
Set your song length to max (2158), reduce your tempo, and/or adjust your time signature. Example, temp 60, 4/8 time will give you 2hrs 22minutes of recording.
good luck

Giving advice on audio recording

I first started using Captivate when it was Robodemo 5 and
that was not all that long ago. I remember when I first downloaded
it. I thought it was the greatest training software ever. However I
did have problems. The most long lived problems were with audio
recordings. I know that many people have. On some of the forums I
read where one person had given up on Captivate. They did not like
the inconsistent recording of the audio. Sometimes it would be deep
and resounding the next slide would sound as if you are at the end
of a tunnel,and the very next recording would sound metallic and
soft sounding.
Just like with everything else if you are persistent enough
you will find a solution. I tried various mikes some expensive
others less expensive. They all produced the same results.
Inconsistent recordings. The recordings to me were passeable but
all not that great. Then I ordered one of those newer usb condensor
podcastiing mikes.
All I can say is wow! Those new podcasting mikes they level
out the sound.You can still notice that one recording sounds a
tiny,tiny,different than the next,but barely noticeable.
Most of us are not radio announcers or professional
broadcasters however to me the mike made an incredible difference
in Captivates audio recording quality.

Hello Rick!
The microphone is around 80 dollars, it comes with a soft
ware preamp, and I have always recorded directly into Captivate.
Even a low bit rates and encoding frequencies it still sounds good.
All my Captivate files are produced for the web. Html and .swf
files.
It is the mike Rick that made the difference. It is a Samson
microphone. It is quite large and heavy. I found out about it
through podcasters. I wondered what podcasters were using to record
audio. Audio quality would be important to them. What I wanted was
the best mike for recording onto a computer. The podcasters are
fanatics about the mikes they use.
Here is the advert from Samson.
"The C01U USB Studio Condenser Mic is the first affordable
studio condenser mic with a USB interface.
For the first time ever, musicians who record music on
computers have a simple, affordable way to capture high-quality
vocal and acoustic instrument performances.Seamless integration was
the idea, and it was obtained by creating a studio condenser
microphone that can be plugged into any computer with no in/out
boxes, no expensive computer pre-amps, just a USB cable.
The C01U condenser microphone is based on our wildly
successful C01. It features a 19mm internal shock mounted diaphragm
with a cardioid pick up pattern ensuring pristine studio quality
recordings."
Most online music stores carry these . Find one that you can
trust. Just Google Samson microphones.
Everyone can have good quality audio recorded directly into
Captivate. For those new at audio recording listen to podcasters
and other broadcasters. Animate your voice to make it more
interesting,speak at the same volume level, get a "pop" filter or
make your own with a nylon and reformed wire coat hangar. Practice
with your voice ,adjust the settings ,test various settings out and
soon you will be saying " wow"!
http://www.samsontech.com/products/productpage.cfm?prodID=1810

Audio Recording Working Sporadically Since 4.5 Upgrade

The audio recording feature we've built into one of the activities on our educational website has been faultering since our recent upgrade to FMS4.5 .
We're using the "publish" feature of NetStream.
It seems to work fine for a while, then it stops working.
Has there been a change in the 4.5 update that may be the cause?
Is anyone else having this problem?
Thanks,
Mike

Thanks for your response, SE_0208.
We're simply attaching audio that's incoming via the user's microphone to an instance of the NetStream class, which show up as .flv files in the application's "recordings" directory. Code snippet as follows:
     var nsRecord:NetStream = new NetStream(ncRecord);
     nsRecord.setBufferTime(2);
     var mic:Microphone = Microphone.get();
     mic.setRate(11);
     mic.setSilenceLevel(1);
     mic.setUseEchoSuppression(true);
     nsRecord.attachAudio(mic);
     function playRecordedAudio():Void {
            nsRecord.play(fileName);
It's worked without a hitch for three years, (and we get 10,000 visitors a day), but ever since we updated to FMS 4.5, it'll work fine for a day or two, then it suddenly stops recording the files. (No new files show up in the recordings directory).
One clue, in case it helps, is that when the problem arises and it quits working, the Flash Media Administration Console shows a huge number of Active Clients, (1000+). When it's working fine, that number is significantly smaller, (around 20).   I'm wondering if it's failing to recognize when users have disconnected, thus accumulating and maxing out on Active Clients and crashing the application.
Your thoughts?
Thanks,
Mike

IPhone video recording with screen/phone locked?

Hi guys,
I cycle commute to/from the studio, and have had some close calls of late with idiot drivers.
Id like to use my iPhone to record my ride to/from work, just incase something happens.
Is there a way/app to allow me to turn the screen off, or lock the phone while recording video?
Thanks!

There are lots of dashcam apps available now. If you want to record the whole ride rather than the last few minutes, just set the record time to the max your phone memory can stand. I use ISMDVR in my car, it has a car mode screen which is mainly black but does give a speed reading and some other info. I tried one or two apps but settled on that one.

My quicktime player has stopped audio recording. Any suggestions what I can do?

my quicktime player has stopped audio recording. Any suggestions what I can do?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

How can I copy an audio recording in Skype?

I have an audio recording of one of my contacts on Skype.
Can you tell me if there is a way to copy this recording to my hard drive and if so how?
Can I do it with MP3 Skype Recorder 4.11 and if so how? Where would it be recorded to if I can do it this way?
Any help with this will be really appreciated
HB

I already have a Skype recorder for any incoming or outgoing Skype or telephone calls. I use MP3 Skype Recorder for that. What I'm trying to achieve is different.
I have an existing voicemail message in Skype itself from one of my Skype contacts. It is this voicemail message that I want to save to my hard drive somewhere so there is no chance of me losing it in Skype itself.
I right clicked on the recording and there is an option in the context menu to 'Copy Message.' I clicked on this but I don't know where to save it to on my hard drive so I can play it whenever I want from there as a file.
I would also like to know if there is any way to change this voicemail message to another file format to play on my hard drive.
Can anybody help me with this scenario please?
Thanks
HB

(iPhone) audio recording max. frequency?

Similar Messages

Maybe you are looking for