IPhone backup storage locations (notes, files, email signatures, etc.)?

how does one back up notes, files, and email signatures on an iPhone? Where are they stored on a Mac. Does it all go into my iTunes library?

The backup file that iTunes makes stores that information. The file is located in ~/Library/Application Support/Mobile Sync/Backup. This file is not easily readable, but is the file used when you restore your phone from backup. This Apple article explains the backup: http://support.apple.com/kb/HT1766
To find a utility to get information from the backup file, do a Google search for "backup extractor Mac".

Similar Messages

  • WBAdmin BMR backup says "There is not enough free space on the backup storage location to back up the data."

    We're doing nightly BMR backups of a small 2012 R2 Hyper-V host via wbadmin to 2TB USB disks, via
      wbadmin start backup -backupTarget:z: -quiet -noverify -vssFull -include:e:,c: -allCritical
    (where E: contains the sole VM).
    We are using the same backup system on other similar Hyper-V hosts running 2008 R2 and 2012, with no problems. However, with this 2012 R2 host, after a few months of no problems the backups started failing with:
      There is not enough free space on the backup storage location to back up the data.
    This made no sense, and continues to make no sense:
    The 2TB backup disks are only half full (>1TB free), with 600GB of unallocated shadowstorage.
    There should be room for many more backups on these disks. Each currently contains 11 to 13 backups, with the initial full backup having required about 600GB and each subsequent backup only requiring another 20GB to 40GB.
    There is over 40GB free on the C: drive and 300GB free on the E: drive; free space on the host volumes is not an issue.
    Increasing the shadowstorage limit on the backup disks to unbounded doesn't resolve the issue.
    This is not a problem of a RECOVERY partition that's too small, and SystemState backups always complete successfully.
    The first workaround we found was to temporarily reduce (not increase) the shadowstorage allocation on the E: drive (containing the VM) and then increase it back (with the end result of deleting old shadow copies).
    This worked reliably, but looking for a root cause led us to uninstall the Windows Updates installed mid-September (in particular the Aug 2014 and Sep 2014 roll-ups), which preceded the start of this problem. But instead of resolving the problem the uninstalls
    made it worse, in that our workaround stopped working.
    We reinstalled the Windows Updates, and then tried setting backup performance to normal, in case the problem was related to VSS on the host volumes, but the errors continued.
    At this point the only way we've found to work around the error is to delete 1 or 2 of the oldest backups on the destination disk, via
      wbadmin delete backup -backupTarget:z: -deleteOldest
    after which the new backup will succeed.
    But, again, this makes no sense, as the destination disks are only half full, and even if space was an issue wbadmin should delete old backups as required. And this same system is working fine on 2008 R2 and 2012.
    Any suggestions?
    Thanks,
    John

    Hi John,
    Please check run the command below to check if the space required to complete the backup causes the snapshot storage space to become less than 1/8 of the target size.
    vssadmin list shadows /for=x: will list the shadow copies on x: and creation time.
    WSB will not shrink the diff area to less than 1/8 of Target volume size as we do not want to lose all past backups just to accommodate this one.
    For more detailed information, please refer to the article below:
    Windows Server Backup automatic disk usage management
    http://blogs.technet.com/b/filecab/archive/2011/03/14/windows-server-backup-automatic-disk-usage-management.aspx
    V. Backup, Restore and Disaster Recovery
    http://social.technet.microsoft.com/wiki/contents/articles/1846.v-backup-restore-and-disaster-recovery.aspx?Sort=MostUseful&PageIndex=1
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Storage location and post.chge storage location not in the same warehouse

    Hi All,
    We have HU managed Storage Location, and in this Storage Location we have SUT managed Warehouse, Now while Goods Receipt we have to create inbound delivery, which is working fine and i can see my stock in Goods receipt area,, later on whicle creating Transfer Order to putaway in a bin i have a error message "Storage location and post.chge storage location not in the same warehouse" please help me with this error message. Thank you for all your inputs.
    Regards
    Samuel

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • BAPI_GOODSMVT_CREATE - Error Storage location not supported...

    Dear All
    I am creating the material movement documetn 561 (MB1C) using BAPI_GOODSMVT_CREATE.
    Howeever, the BAPI returns me the error saying
    Storage location not supported. 
    What is this about.  Can someone give me hint
    I searched the forum and not able to find it.
    Regards,
    Venky

    Hi Venky,
    Are you creating a goods issue with reference to a reservation? If so, the documentation states that the storage location is only needed if it's not in the reservation.
    The following fields may have to be populated in some cases (this is not a complete list):
    Storage location (if not planned in the reservation)
    Brenda

  • I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

    I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

    So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
    This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there?

  • Storage location not getting determine in Sales order

    Hello All,
    Storage location not getting determined in SO, every time when i update picking i have to manually enter the storage location.
    I saw few of the response in the SCN but one thing i noticed in my system was, when i enter OVLQ i don't see OR order type, and for order type BV which is present in system assigned to MALA but still when i am creating CS order still storage location is getting determined.
    Please help me to resolve this issue.
    Regards,
    Vishwanath.

    Hi Vishwanath,
    OVLQ is Delivery type and storage location determination and not for sales order type as you assumed
    As per standard for BV cash sales order type subsequent Delivery Type is BV and hence you can see the value MALA against BV
    Just check for LF delivery type there would be storage location determination assignment
    Storage location is determined at Delivery level and not at order level
    thanks
    santosh

  • Storage location not set

    When trying to import movies from my Panasonic camera into iMovie I get the message "No storage location set". What to do?

    Jeremy CS wrote:
    When I try to import an iMovie Project on my desktop, Final Cut Pro X crashes.
    Jermey CS,
    Did you actually move iMovie Project to desktop? While you are in Final Cut Pro X, and if you try to import iMovie Project, it kinda of knows where to find original files made by iMovie.
    Only a big if you leave the original iMovie Project and iMovie Events as it is inside Movie Folder on your computer. IF that is the case, then Final Cut Pro X knows where to find iMovie files when you wish to import iMovie Project.
    I am not sure why you move around and move files all over the place. I am afraid that you are asking for more trouble or problems unless if you understand what to expect and what's not.
    Hope that helps. Good luck.
    Brian

  • Purchased ipad already got apple id through itunes and iphone but it is not an email address ipad setup process will not allow me to use current id or change id to primary email address - do i have to have different id for ipad

    Purchased an ipad but already got apple id through itunes and iphone but is not an email address, ipad setup process will not allow me to use current id or change id to primary email address - do I have to have different id for ipad

    It does have to be a verifiable email address though, you can change it here:
    Apple ID support
    http://www.apple.com/support/appleid/

  • Storage location not getting copied in process order for components

    Dear PP Gurus,
    While making a production /process order the storage location of component materials is not getting copied from material master into the process order, it is showing any default storage location.
    What couls be the reason for it..
    For all components it is defaulting the same storage location.
    Please throw some light on the issue what could be the reasoon for it..

    Dear,
    System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
    Check in BOM component details storage location you have defined.
    Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
    Also check the Material requirements planning (PP-MRP)
    --> planning process
      --> BOM explosion and dependent requirements determination
        --> storage location determination for BOM explosion
    Regards,
    R.Brahmankar

  • Outbound Delivery - Storage Location not Picking Up.

    Hi all..
    I am trying to create a Outbound Delivery , but the Storage Location is not picking up at all.
    Its blank . ...
    Please any one guide me what are all the Master Data checks and config checks i have to look
    upon.
    Thanks
    Balaji

    Thanks Charlier & GS .
    Issue was solved , i didnt meniton in the Sales document.
    Thanks
    balaji

  • IPhone backup with iCloud not found

    I backed up my iPhone with iCloud, and when I got a new phone, it couldn't find the backup when I logged into iCloud.  How can I find my backup?

    Your new phone has to be running the same version of iOS or higher than the version on your old phone in order to restore the backup.  If it is running an earlier version or iOS you won't see the backup.  If that's the case you will have to update your phone before you can use the backup.
    Also, not sure if you're aware of this, but you can only access your iCloud backup when you first set up the phone.  If it's already set up, you'll have to go to Settings>General>Reset and tap Erase All Content and Settings, then go back through the setup process, and when given the option choose Restore from iCloud Backup (see image below).  Be sure you are connected to wifi and your charger as this will take some time to finish.

  • Storage location not found in MIGO for 101 movement type

    Hi all,
    While posting goods receipt in MIGO for purchase order using 101 movement type,i am not getting the storage location field..Though goods is getting posted in migo transaction,it is not getting updated in the stock while seeing it in mmbe...
    can anyone help me..
    Thanks&Regards,
    Hari

    Hi,
    When ever we purhcase a material , it can be for two purpose
    1. Material to Stock
    2. Material for Direct consumption
    If you wish to stock the material Material No is required and Cost Center Assignment is not required. In this case when you create Goods Receipt (MIGO) storage location will be asked.
    If you have given a Cost Center or say any other Account Assignment, then at the time of GR (MIGO) storage location would not be asked, as the system assumes that it is for that particular cost center.
    I think in your case you have given some Account Assignment category in your PO. Please check.
    Hope it is of your use. Please reward.
    Nikhil

  • Iphone will receive but not send emails using ntlworld

    My iphone 5 and ipad mini will both receive emails but not send emails using ntl world. The isp is ntlworld.com. Virgin, who run ntl, cannot help.

    You have the wrong outgoing (SMTP) server settings. Contact your email provider for the correct settings.

  • Why is the date of my last iphone backup in itunes not updating?

    I plug in my iphone 4S at night and it goes through the process of backing it up and syncing my apps, which appears to be progressing normally. However the date showing for my last backup hasn't changed since the beginning of Feb.
    Does anyone know why? I have this terrible feeling that my backup isn't getting updated, but the apple software isn't smart enough to tell me that it failed.
    Thanks,
    Bill
    PS - all of my software, itunes and the OS on the phone are all up to date. (v 6.1.3)

    I get the same problem. I moved the backup files (B1) to another drive and then itunes generated new backup files (B2) for my iPhone. They seem to be of similar size. Due to my running out of space on my system drive, I've linked the backup folder to another drive. This is where I moved my original backups (B1). After I did that, the iPhone seems to sync but once again, the date of the backup did not change. I have no idea what the issue is. I'll save both B1 and B2.
    To be sure you've got an up to date backup, I recommend changing the name of the original backup folder to backup2 and then forcing itunes to make a new backup from scratch.
    On a windows machine, the backup folder is found at:
    C:\Users\(Username)\AppData\Roaming\Apple Computer\MobileSync\Backup

  • HT4859 backup Storage Location

    If I have chosen to store my backup on my computer where is the file stored?

    Hi John,
    Please check run the command below to check if the space required to complete the backup causes the snapshot storage space to become less than 1/8 of the target size.
    vssadmin list shadows /for=x: will list the shadow copies on x: and creation time.
    WSB will not shrink the diff area to less than 1/8 of Target volume size as we do not want to lose all past backups just to accommodate this one.
    For more detailed information, please refer to the article below:
    Windows Server Backup automatic disk usage management
    http://blogs.technet.com/b/filecab/archive/2011/03/14/windows-server-backup-automatic-disk-usage-management.aspx
    V. Backup, Restore and Disaster Recovery
    http://social.technet.microsoft.com/wiki/contents/articles/1846.v-backup-restore-and-disaster-recovery.aspx?Sort=MostUseful&PageIndex=1
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for