IPhone battery dying after few hours from 100% charge

Since I upgraded to the iOS 5.1 my battery life on the iPhone 4S has been ridiculous.
For example, I left my house at 740am with my phone on 100%, I have browsed a little (safari and facebook) for no more than 20-30 mins in total.  No apps are not running in the background as I ensure to close apps once i have finished with them. And now at 1400 I am left with 28% battery. i am not due to be at home until 1900.
Have I been unlucky with getting a dodgy iPhone from Orange?? the model is MD242B if that helps.
Also, notifications and banners are all turned off except for phone, messages, whatsapp, remainders, calendar.
I am careful not to over charge my phone, I do use an app called BatteryDoc to monitor my charging.
I always let my battery go flat before charging to 100% (with no trickle change), i believe this is a normal charge and what BatteryDoc advises i perform a full charge..
I am slowly regretting this phone after 6 months now.......
any input is welcome.
Thanks,
Cookie

This was driving me insane too. I love my iphone but this is the one flaw. I tried all the "maximizing battery life" suggestions, and it helped slightly.
I have one suggestions: buy an iphone battery case. I bought one off ebay for $29.99 and it is amazing. Nearly doubles the battery and is way nicer than the one at Apple (not to mention 1/4 of the price). The item number is 200795419418 on eBay in case you are interested.
Hope That Helped!!

Similar Messages

  • Update my 4 to iOS 7 this afternoon,  battery died in 4 hrs from full charge

    after updating the ios, updating all the apps, all while plugged in i made sure all my apps were closed and went to dinner, the battery was at 100% .  at dinner  and while waiting for the table i did a couple facebook posts replies, looked up one search on safari and checked my email once and once only.  i noticed the battery was draining realy fast so i put it away until i got home at which point it was down to 17%.  by the time i got the dogs out to walk and came back 15 mins tops it was at 11% and i didnt even have it in hand.
    before the update this battery lasted ALL DAY with more activity including phone calls!!!!!
    WHAT's up with this Apple?  this has got to get fixed, its unacceptable that this iOS was put out there with such deplorable battery consumption (no, this is not the omly place you will see concerns about battery life with iOS 7)
    i say fix it or give your customers a rollback option.

    i'll try this.  Thanks. 
    do you recommend those battery Dr. Apps? do they even work?
    - this is the thing, i dont do anything crazy; standard stuff like checking emails, responding to txt's; phone calls that last no more than 5-6mins tops. But i've noticed that i used to be able to run all day without issues, and recently (i'd say about a month) i'll use it for 20mins and and i'll see it go from 100% to 65% in a flash... it messes me up for the rest of the day.
    even today for example... i saw this reply on my phone and i was at 36%.  by the time i read the post, did all the recommended things in the article; the phone died.  and that took no more than 10mins to do all that.  so i'm stumpped.
    never had this problem before, then poof.... and i have 4 iphones; (iphone 5, iphone 4s and 2 iphone 4's) iphone 5 and 4s are on ios7 and have this same problem; the 4's are still on ios 6 and are running like well oiled machines.  i hope this works.
    any other suggestions, send them my way. and i'll keep you posted on my end.
    thanks for the help.

  • Iphone 4 dying & shutting off at 70-100% charged?

    i have the iphone 4, since march. i never had ANY issues. it lasted me a day and a half, 2 days, without charge. or i would just charge over night while i slept. after i upgraded to iOs 5, my battery started dying so quick. i upgraded to 5.0.1., still doing this!!!  Also, my phone will be at 70-100% charged, and it will just shut off (die).. it says I need to charge it, but as soon as i do plug it back in, the battery % is still the 70-100% , whichever % the phone shut off on me. (even with upgrade to 5.0.1) Anybody else ever have this issue along with this battery life?

    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. DONT CONNECT YOUR DEVICE TO A COMPUTER.
    If that doesnt work perform a back up and restore
    Go to settings>icloud>storage and back up>back up
    or back it up to a computer
    after that preform a restore by going to
    general>reset>erase all content and settings

  • Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me.

    Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me what to do.

    I final piece for me in the jigsaw following on from this
    http://www.care4pcs.co.uk/2012/10/how-to-be-happy-gmail-user-on-iphone-or.html 
    is to turn off wifi when you do not need it. When I leave the house I turn off wifi, because the majority of the times when my iPhone has got very hot and crashed is when I am away from home. I suspect that if the iPhone is in the vicinity of public wifi (wheather secure or not secure) it will try and connect, even if you have 'automatically join known networks' set to off. This is easy of course if you have an unlimited data contract for your iPhone. I may be wrong, but it is working for me. It makes sense for me because it is another way of reducing the work the processor (and battery) has to do and therefore reduces the chance of overheating.
    Having said that, I never had this problem with my iPhone 4. I now have a 4S.
    Try it. Hope it works for you.

  • My iphone was powered off due to low battery charged it after few hours it took 30 min to show apple logo but i noticed that my phone was charging slow and draining fast, after this updated it to 8.1.2

    my iphone was powered off due to low battery charged it after few hours it took 30 min to show apple logo but i noticed that my phone was charging slow and draining fast, after this updated it to 8.1.2 same problem & rest to factory still same problem (plz help)

    Hello abdullahfromvenus,
    Welcome to the Apple Support Communities! I see that you are experiencing issues charging your iPhone 5. I can understand how frustrating that may be. The following resource provides a few troubleshooting steps that may help to isolate and troubleshoot this issue:
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT203030
    Cheers,
    Matt M.

  • My IPhone 4S keeps entering recovery mode after few hours

    Hi,
    I bought a new IPhone 4S from 12/2011. The first month of usage is fine but after I plug it into Itunes in my PC, problems start to appear. The phone keeps entering recovery mode (screen with itunes logo and USB cable) after a few days. Not long later, it automatically goes into recovery mode after 4-5 hours or randomly. I tried to hold the power with home button to kick it out but it goes back to recovery mode again after few hours. The following issues are also detected:
    - Sometimes there is a blue horizontal line appear when device is rebooting with Apple logo.
    - Any apps other than Apple's default apps cannot be accessed (tap the icon and it gets kick out to the home screen).
    - A yellow screen is often seen and then device goes back to recovery mode by itself.
    - 2 to 3 out of 10 attempts holding home and power buttons can get it out of recovery mode while 7-8 times this does not help.
    I even use Itunes on PC to recover the phone as new Iphone. I went through all the settings as a new phone but the problem still persists.
    I thought this is minor software issue but after seeing all these behaviors, I suspect this may a hardware-related problem.
    Did anyone experience this problem before?
    Cheers.

    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • How do i fix my issue: Apple Logo flashes on and off after iphone battery died during IOS update?

    I've tried the methods I've seen on youtube and other iphone tech help sites but I am still having the same problem. Today while updating to IOS 7 my iphone 4 battery died and I didnt have a charger, now that I am home an I put in on the charger I notice the apple logo just flashes on and off. I've tried to restores using the DFU mode with the home and power button but that only seem to stop the logo from flashing and even then the iphone still isnt recognised by the pc to restore, Is there any other way i can go about fixing this problem!!!!

    You can try the steps recommended in the User Guide.  If they don't work bring your phone into Apple for evaluation.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I'm facing a problem only for this account that whenever I purchase  a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also  when i visit the store from the same account to downlo

    I'm facing a problem only for this account that whenever I purchase  a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also  when i visit the store from the same account to download the ringtones again i have to buy them again and again . Please try to fix this problem for me and refund my money back.

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    There are lots of other posts on this forum about ringtones. If you want to contact iTunes Support then you can either use the 'report a problem' page : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT1495 how to restore iphon-without backup, after it synchronization from ipod

    how to restore iphon-without backup, after it synchronization from ipod

    Thanks Eric,
    After inserting the original DVD I installed OSX and after reboot I had a working computer.
    There was no opportunity to restore the TM backup. however when I rebooted from the
    DVD again I saw that possibility from a menu of the install utility.
    I ran through the restore over night (8 hours) and when I woke up, I had my computer back!
    Thanks for helping me out.
    Cheers, Rob

  • IMac won't allow me to login after few hours

    Hi everyone...
    My iMac won't allow me to login after few hours. Actually I had a limited broadband connection which is free from 2AM to 8AM. So I have scheduled some downloads to start at 2AM and end at 8AM. Before going to bed, I just put on the screen saver. When I wake early in the morning and move my mouse.. blank screen turns on and colorful spinning wheel appears, but log-in window doesn't appear. This has happened thrice till now. Day before yesterday it was fine. But yesterday and today I got the same problem. Previously also it was working fine. I can't figure out why it is behaving like this...
    Initially, in Power save options, I scheduled iMac to wake up at 2AM and sleep at 8AM and then used to put iMac to sleep before going to bed. It was working fine and did the same thing for more than a month. Now I have removed wakeup & sleep scheduled options from Power save options.
    Following are the settings/options selected:
    1. In energy save options, I have selected the option not to put iMac to sleep when it is inactive for certain time.
    2. Put hard-disks to sleep whenever possible is checked.
    3. I have scheduled the downloads in Azureus, Transmission and Speed download 5.
    Following are the temps and rpms:
    Temps:
    HD: iMac, Vista: 124 F
    CPU A: 117
    Airport Card: 151 F
    Ambient: 83 F
    GPU: 133 F
    GPU Diode: 137 F
    GPU Heatsink: 137 F
    HD Bay1: 124 F
    Mem Controller: 121 F
    Optical Drive: 110 F
    Power supply1: 162 F
    Fans:
    CPU Fan: 1198 rpm
    Hard Drive: 1199rpm
    Optical Drive: 998rpm
    One more thing, recently I have reset the SMU because it is taking too long to boot up. To my surprise, after restarting, fan (not sure which one) started to make bigger sounds. I then had to reset SMU two times and only then fan started to spin normally without any noise. I'm scared & worried...
    Someone please help me where I went wrong.... what can I do to solve this problem..
    You know I purchased this iMac for Rs.86000/- INR ($2097 approx.) ... after two months they slashed the prices by Rs.20000/- INR($487 approx.)... so this is how my luck seems to be

    Hello and sorry. First, if you reset the SMU. make sure you do not hold the power button down while reconnecting the cable or it will reset the SMC incorrectly.
    When you say you are logging in, are you logging onto the internet, or onto the computer/user account?
    If it is intermittent than it sounds like your internet and that would be best handled by your internet provider first.
    The following article is good for troubleshooting issues and you may wish to bookmark it.
    http://support.apple.com/kb/TS1388
    Do you have the install dvd's for the computer with you?
    http://support.apple.com/kb/HT1782
    (another article for running disk utility)
    If it is your internet you are referring to than try going to the Apple in the top left corner and clicking on it.
    Than click on the System Preferences
    Then click on Network
    Then click on Assist Me.
    Then Assistant
    Maybe call it Test Location
    go through the steps involved and see the outcome.
    Sorry for the delay and if this does not help at all. But I will check back if you return with more information I will do what I can to help you. Also may wanna check out applecare protection plan from apple and also the article below:
    http://www.apple.com/support/quickassist
    http://support.apple.com/kb/TS1388
    If ya can reply back with more information

  • VSS snapshot of 1.1TB is ending after few hours with timeout. No errors in event log

    Hello,
    does someone have experienced issue where starting making snapshot (forum GUI or command line) is taking a lot of time and then it just ends with timeout?
    I have scenario on virtualised Windows Web Server 2008 R2 where backup is being made by Idera Backup Software but since it relies on VSS Snapshots then we can just skip this point because making snapshots from directly Windows command line or drive preferences/GUI
    is ending with timeout for this single drive after few hours. Affected system has 3 drives: C - 95GB, D-1.06TB and E-120GB. C and E can be backuped correctly and only drive D has problems. System is updated with latest drivers vssadmin for writers returns
    list without any errors and snapshot for drive D which ends with timeout is not generating any error in event log. I wanted to configure VSS trace like it is being instructed on this site:
    http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp?topic=%2Fcom.ibm.itsm.tshoot.doc%2Ft_pdg_traceprfrm.html
    but I don't see any trace.txt file on given location. If I remove drive D from backup process it ends without errors. System was restarted many times. Only thing which is visible in windows Event log (application part) is that "The VSS service is shutting
    down due to idle timeout." about 4 hours after snapshot making proces is starting.
    I've contacted Idera backup about this but they can't help too much if Windows snapshot process is failing. They suggested that something can be wrong with this drive but since this is virtualised machine and all of my VM are being stored on RAID10 disk
    array connected to my server using fiber connections then I don't think that this is hardware issue (especially when other two drives are located on the same LUN on disk array).
    Any suggestions?
    Regards

    Hi,
    Do you create VMs on Hyper-V or VMWare? Based on research, possible causes could be:
    1. Files changes in the volume is very huge. So the shadow size may be big and the current shadow storage my not able to hold it. And that’s cause the shadow copy creation failure. 
    2. The I/O in D drive is heavy and make the shadow copy I/O failed. 
    3. Server is too busy to handle the request.
    4. The disk is heavily defragment.
    Please refer to the articles to troubleshoot the issue:
    Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and during times when there are high levels of input/output
    http://support.microsoft.com/kb/826936/en-us
    VSS timeouts during backup? What could contribute to that?
    https://blogs.technet.com/b/askpfeplat/archive/2012/09/12/vss-timeouts-during-backup-check-fragmentation.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • IPhone 6 dies after 4 hours, Wi-Fi is slow, phone signal is week

    Does anyone here have a the same situation like mine? My iPhone was dead after 4 hours running constantly even though I had set sleep mode to 1 minute. I was working and had my phone in the pant pocket, I didn't notice until it was at 20% and got really hot, but I was too busy to care about it and after 10 more mins its dead. Freak out. lol
    Now is Wifi module issue. My TV connect to the same Wi-fi router as my phone, while I was able to watch movie on Netflix on the TV, I couldn't even load the app from App Store. Well even thought TV consumes more data by watching movie but I have Blast internet plan with Xfinity which gives me up to 40Mb/s speed. So TV definitely is not main cause.
    Third issue, Verizon signal is always 3 bars everywhere I'd been. What the heck, Verizon has a most coverage tho. Same thing happens to my girlfriend iphone 6.
    Any idea?  

    Basics from the manual are restart, reset, restore from backup, restore as new device?  Have you been through ALL these troubleshooting steps yet?

  • Sound gets off after few hours Satellite L745

    Hi,
    I have Satellite L745 model, bought 4 months back. 
    Two days before, I was using internal speakers for watching movie and after 2 or more hours there was no sound from the internal speakers of the laptop. So I tried other sound tracks, youtube etc but there was no sound from the internal speakers nor from headphones. I thought sound card is burnt as I was feeling hot right above the audio jack input. So I switched off the laptop for 30 minutes and switched on again, and found that it was working fine, there was sound from both internal and external headphones.
    Yesterday night same problem happened again, there was sound, working fine but suddenly after few hours there is no sound. I switched off the sound track and waited 5 minutes and again switched on the sound track then there was sound for few seconds but then again no sound. So I did same switched off the computer for 30 minutes and checked again then there was sound from the interanl and external both.
    I dont know what is the problem I did call service centre for technical assistance and he told me to re-install the drivers I did so. To check whether it is working fine now or not I need to switch on my laptop and sound track on for more than 3 hours.
    Any one experiencing such problem or any assistance from Toshiba technicians will be welcome.
    Thank you.
    Dileep  

    I had exactly the same problem during the reproduction of a youtube video or any other sound from a music file or a video played in Windows Media Player, if i don't put the level of the volume at the top, the problem doesn't exist. I updated the drivers of the sound card Conexant Cx20585 @ Intel Cougar Point PCH, as well as the drivers of the BIOS, but nothing improved. Previously I did the system restore, but then I started to update the drivers since the restoration did not solve the problem.
    I can not think what else to do, at least I'm relieved not to be the only one with the same model and the same problem notebook, Toshiba staff stay tuned!
    Thank you!
    PS: sorry for my English, it should not be the best, I'm from Argentina.

  • Ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    Are you restoring the iPod from a previous back or to factory settings? If you haven't restored to factory settings yet, I would do that next.  And if the problem still continues, it's most likely hardware related, in which case you'll want to schedule an appointment at your local Apple Store/Genius Bar to have them take a look at it.
    B-rock

  • My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    OK. If you believe that.
    When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
    I tell you those are the signs of a disk that is about to die.
    Allan

Maybe you are looking for

  • How to show hyperlink in forms

    I have two fields, companyname and webaddress, in a table. I want to execute all rows in the form in the following way: Companyname webaddress Oracle [www.oracle.com|http://www.oracle.com] Microsoft [www.microsoft.com|http://www.microsoft.com] When I

  • I do not see Library or Albums when creating books?

    I want to be able to choose my photos from Library or albums while craeting a book in iPhoto 06, please tell me how I can see me photos while creating a book. Thank you, Sebastian

  • Split/Join, Invoke Service and SOAP Header in osb10.3 wls10.3

    Hi gurus, Are Split/Join able to invoke external services with a custom SOAP header? I have a split join to call 2 external business services in parallel. Those 2 external services requires a custom SOAP Header <soapenv:Header> <v1:ConsumerRequestHea

  • How to go back to version 2.2

    V3 has ****** me off. How do I go back to 2.2?

  • Webstart forgetting network settings

    Hi, at work we're having our users run an app through webstart and due to a proxy we have the users setup to connect via a Direct Connection. Our problem is that every time they reboot their computer, webstart is forgetting this setting (changing bac