IPhone Battery Meter Never Goes Down

My battery meter will only show 100% charge...then all of a sudden the "please charge" will come on the screen. When I plug it in, the battery meter again shows 100% charge. When I charge it all night it holds a good charge, but I have no indication of when my battery is going to die.

I have experienced the same problem. I actually didn't even get a warning, power just ran out I the phone was dead until I charged for 20 min.
Message was edited by: ripley9090

Similar Messages

  • Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Apple can replace the battery for $79 US.
    http://support.apple.com/kb/index?page=servicefaq&product=iphone

  • HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

    I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

    Hi melvin victor,
    Welcome to the Support Communities!
    The information below may help you troubleshoot your iPhone battery issue:
    iPhone Battery and Power - Apple Support
    http://www.apple.com/support/iphone/repair/battery-power/
    Battery & power
    Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
    I hope this information helps ....
    - Judy

  • My battery on my iPad mini isn't charging, the charging sign is on, but the battery just keeps going down.

    My battery on my iPad mini isn't charging, the charging sign is on, but the battery just keeps going down.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Since you did not say how long the battery lasts I am nut sure the battery is the problem.

  • Hard Drive connected - Space Available never goes down when deleting files?

    I have tried 2 different USB drives connected to the new airport N router.
    Both drives work fine, an 80 GB maxtor, then replaced it with a 500GB usb seagate drive. Both drives have the same problem.
    I only hook one drive up and copy over files to the drive. The space available shows up fine, but when I delete any files, the space available never goes down.
    Any ideas how to fix this or is this just a nice big glitch?

    Anyone with a hard drive connected to the N router.
    Just copy some files the drive, then delete them while watching space available. The space available never goes down. What gives? Anyone else seeing this problem?

  • Cisco 3925 router with an ATM E3 card that never goes down!

    Hi all,
    We a Cisco 3925 router with an ATM E3 card (NM-1A-T3/E3) configured as below with 1 PVC. we see that the ATM subinterface we created for the PVC never goes down! not even when the WAN link is down! The problem with this is we are tracking the line protocol of the ATM sub interface to have VRRP failover to standby router. But because of this issue only BGP goes down whenever the WAN is down & line-protocol of the Subinterface remains up, the failover never happens & site is down. We can configure VRRP to track reachability of a BGP route as workaround but I would like an explanation or troubleshooting steps to check whats the trouble with current setup?
    Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.1(2)T4.1, MAINTENANCE INTERIM SOFTWARE
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Tue 30-Aug-11 08:44 by prod_rel_team
    card type e3 1
    interface ATM1/0
     description Link to PE
     mtu 1500
     bandwidth 34010
     no ip address
     no ip proxy-arp
     logging event subif-link-status
     no atm ilmi-keepalive
     no atm enable-ilmi-trap
    end
    interface ATM1/0.101 point-to-point
     description PVC to MPLS PE
     mtu 1500
     bandwidth 2500
     ip address a.b.c.d 255.255.255.252
     no ip proxy-arp
     ip flow monitor FMforIP4in sampler ata1to100 input
     ip flow monitor FMforIP4out sampler ata1to100 output
     ip nat outside
     ip virtual-reassembly in
     no atm enable-ilmi-trap
     snmp trap link-status
     pvc 1/101
      vbr-nrt 8192 8192 1
      vc-hold-queue 2048
      oam-pvc manage
      oam retry 3 5 1
      oam ais-rdi 15 3
      encapsulation aal5snap
      protocol ip inarp
      queue-depth 5 3
      service-policy out Edge_Queueing
    end
    Thanks a lot in advance!

    Your router has some configuration on it already and it would help us give you better advice if we knew what is already in the configuration. So would you post the output of show running-config (if there is sensitive information like addresses and passwords you can mask them out.
    Changing the configuration register was a good start. I have a couple questions/observations that may help you get started. I notice what appears to be the same public IP address on Gig0/0 and on multilink. Did you get that address from your ISP? If so what kind of connection do you have to the ISP?
    In your description you tell us that Gig0/0 is connected to a small switch, which I assume is for the LAN of your network. But that also is the interface where the public address is configured. So I am confused whether this interface is for LAN or for connecting to the ISP. Can you clarify this?
    HTH
    Rick

  • Oracle OHS HTTP Resquest increase and never goes down until I restart OHS

    Hi I have several problems on IAS 10.1.3.3.0 with the OHS (Oracle Http Server).
    In the graphics I see that the HTTP Request increase very fast and never goes down until I restart the OHS
    I monitoring that with DMSTool as the example:
    dmstool /baslije15/OHS:28077:6100/OHS/connection.active /baslije15/OHS:28077:6100/OHS/handle.active /baslije15/OHS:28077:6100/OHS/request.active /baslije15/OHS:28077:6100/OHS/handle.maxTime /baslije15/OHS:28077:6100/OHS/handle.minTime /baslije15/OHS:28077:6100/OHS/handle.avg /baslije15/OHS:28077:6100/OHS/request.completed /baslije15/OHS:28077:6100/OHS/busyChildren.value /baslije15/OHS:28077:6100/OHS/readyChildren.value /baslije15/OHS:28077:6100/OHS/numChildren.value
    The result is:
    Fri Jan 16 15:20:15 ARST 2009
    /baslije15/OHS:28077:6100/OHS/busyChildren.value 18 processes
    /baslije15/OHS:28077:6100/OHS/connection.active 126 threads
    /baslije15/OHS:28077:6100/OHS/handle.active 21442 threads
    /baslije15/OHS:28077:6100/OHS/handle.avg 632138 usecs
    /baslije15/OHS:28077:6100/OHS/handle.maxTime 602716011 usecs
    /baslije15/OHS:28077:6100/OHS/handle.minTime 0 usecs
    /baslije15/OHS:28077:6100/OHS/numChildren.value 56 processes
    /baslije15/OHS:28077:6100/OHS/readyChildren.value 38 processes
    /baslije15/OHS:28077:6100/OHS/request.active 21549 threads
    /baslije15/OHS:28077:6100/OHS/request.completed 664971 ops
    Fri Jan 16 15:20:20 ARST 2009
    /baslije15/OHS:28077:6100/OHS/busyChildren.value 13 processes
    /baslije15/OHS:28077:6100/OHS/connection.active 126 threads
    /baslije15/OHS:28077:6100/OHS/handle.active 21437 threads
    /baslije15/OHS:28077:6100/OHS/handle.avg 632154 usecs
    /baslije15/OHS:28077:6100/OHS/handle.maxTime 602716011 usecs
    /baslije15/OHS:28077:6100/OHS/handle.minTime 0 usecs
    /baslije15/OHS:28077:6100/OHS/numChildren.value 56 processes
    /baslije15/OHS:28077:6100/OHS/readyChildren.value 43 processes
    /baslije15/OHS:28077:6100/OHS/request.active 21544 threads
    /baslije15/OHS:28077:6100/OHS/request.completed 665090 ops
    Fri Jan 16 15:20:26 ARST 2009
    /baslije15/OHS:28077:6100/OHS/busyChildren.value 4 processes
    /baslije15/OHS:28077:6100/OHS/connection.active 124 threads
    /baslije15/OHS:28077:6100/OHS/handle.active 21446 threads
    /baslije15/OHS:28077:6100/OHS/handle.avg 632191 usecs
    /baslije15/OHS:28077:6100/OHS/handle.maxTime 602716011 usecs
    /baslije15/OHS:28077:6100/OHS/handle.minTime 0 usecs
    /baslije15/OHS:28077:6100/OHS/numChildren.value 56 processes
    /baslije15/OHS:28077:6100/OHS/readyChildren.value 52 processes
    /baslije15/OHS:28077:6100/OHS/request.active 21553 threads
    /baslije15/OHS:28077:6100/OHS/request.completed 665259 ops
    As you see request.active value is very high for 124 active connection and this value never decrease during the day.
    After 8pm when the mayor of the user stop working it stay high stable but its never decrease.
    Any idea?? I spent 2 weeks checking all parameters of http.conf but I haven't results.
    TIA
    Marcelo

    Hi Roberto, this are some of the parameters on httpd.conf
    Timeout 300
    KeepAlive On
    MaxKeepAliveRequests 100
    KeepAliveTimeout 15
    MinSpareServers 5
    MaxSpareServers 20
    StartServers 5
    MaxClients 2500
    MaxRequestsPerChild 0
    Putting KeepAlive to "off" what consequence my be have?
    Can you suggest me some tuning?
    We have a large amount of users (600) and a lot of webservice invocation with large transactions (1 to 10 sec)
    TIA
    Marcelo

  • My battery shows it is charging but the percent of battery life is going down

    When I plug my iphone up to the computer it shows it is charging but the percent of battery life goes down.  It won't charge on any of my other chargers either.  This is a pretty new phone, not a year old.  Have already reset by holding both buttons for 15 seconds and that didn't help.

    I think it needs a repair.
    Same as you cherge it setted on air (whith all connections disconnected ?)

  • The battery life is going down fast

    I bought a Macbook Pro about four days ago and I used it for about two cycles (In the 'system information' panel it is saying two cycles) and the battery life is at 96% in iStat Pro so I though that the percentage is going down rapidly... 
    And I saw on the apple website that the batteries are made to get some great performance up to 1000 cycles without going under 80% of battery life...
    Does the battery life will stop decreasing or is it will keep the same decreasing speed ? Othewise if it keeps the same stats it will be at 80% after 10 cycles...
    Thanks

    Have you tried calibrating the battery (as in the readings accuracy)? It appears that the battery life %age fluctuates up and down from what I am seeing on mine. At times it would go down to 96% on Health, both on istats and coconut, as of now my battery health reading says 99%, earlier today it said 96%. I come to think that this is normal and I would not worry about it. Keep using your MBP for a while and see what happens. My cycle says 13 btw.

  • I recently performed a upgrade from 7.0.5 to 7.0.6 and I found that my phone battery drain up very fast and the battery unable charge to 100. Besides, the battery live is going down when I charging with  3G on.Any solution for my issue? Please help.

    Hi, I had my iPhone 4S and I'm recently upgraded it from 7.0.5 to 7.0.6 and I found the battery drain up very fast if compare to iOS 7.0.5. Besides, I also unable to fully charger my phone to 100% now - max is 85% with phone either in airplane mode or switch off totally
    May seek help from your advise on above case.
    Thank you
    Best regards,
    Adrian

    Try killing the battery (Let it drain---turning on all the settings, playing a video, and having the brightness up kills it faster), then let it fully charge from there. Let me know if that works.

  • Since the new software up date my battery life is going down very fast. How can i fix this?

    Ever since i updated my iphone 4 with the new software. My cell battery life is gone so fast. I dont know how to fix this and wondering if there is any one that can....

    There are numerous posts in this forum on how to maximize battery life.  Either look in the "More Like This" box to your right or do a forum search.

  • Ever since i updated my ipod to ios7, my battery has been going down quicky.

    My brightness is down to a inch & i have the bluetooth off, i only have 5-7 apps for the notification center. HELP!!!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • HT4528 my iphone is not charging, it is indicating that it is on the charge but the percent is going down.

    my iphone is on the charger, but while it is suppose to be charging the battery percentage is going down not up.

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • MacBook Pro 2011 15" Battery going down while playing WoW

    One week ago, I' ve buyed the new MacBook Pro 15" with dual i7 2,3 GHz, 1GB Graphic Card, etc...
    The first one i got, had a trouble with the graphic card and I got it replaced with a new one, but on the "old" and the "new" one i noticed a problem. While i play a well known video game (World Of Warcraft) the battery keeps on going down until it completely discharges... I don' t think it is working as intended, and i noticed that the battery goes down when there are a lot of items etc on the screen and it needs more power to work. Am i the only one experiencing this? Is it "normal" or do I have to replace this MacBook once again?

    I just wanted to follow up with an update about the problem I was experiencing. It turns out I bought a wonderful macbook pro with a defective logic board I'm not sure how that gets by quality control, this is my first Mac and needless to say I'm not impressed the computer has been with an authorized Mac reseller and repair place thats still waiting on parts from Apple after 5 days another area I'm not impressed with as they said Apple did not ship parts to Canada this is a brand new computer about two weeks old now. I would recommend to anyone that is having the same problems to take your computer to an authorized apple store or repair depot and get it checked out. Now the question I have is with a problem like that would it have damaged other parts of the computer?
    As a refresher the symptoms I had with the computer out of the box was the charge indicator would alternate between amber and green on the mag safe and the tooltip on the display would alternate between saying charging then to not charging while the battery discharged with the computer plugged in. Some programs made this behavior more rapid those programs that seemed to trigger a more rapid display of the symptoms was playing World of warcraft,iTunes,Safari,Berkeley Open Infrastructure for Network Computing (BOINC)though if these programs were not running the problem would happen it was just a bit slower in developing. I Have the mac book pro spring 2011 17 2.2Ghz i7 model.
    Message was edited by: RayCanada

  • 2.1 firmware update displays incorrect battery meter

    After installing firmware 2.1 on my iphone I started noticing my battery meter displaying the incorrect charge level. I charged it in full yesterday, and this morning I still had more than half the battery meter. I checked 10 minutes later and the meter was now showing 10% left with the red battery meter.
    I went ahead and charged it again , used it for a while and now noticed that the battery meter is not only showing the incorrect amount left (still) but shows a different battery status on different menu screens. Shows battery meter to be full in the home screen and half the meter on an app, email ,etc.
    Firmware 2.1 has definitely messed up the meter!
    inaccurate reading on the battery meter , someone else has to be experiencing this same problem.
    let me know if someone else has this same problem !

    try draining out the battery first and then recharge it, see if that shows an accurate. I had that happen to me on the 2.02 update. The battery meter was inaccurate. Like when i reached 20% it was actually at 50% when i plug it in to charge. So i did sent them a feedback about it. So I'm hoping that the 2.1 fixes this issue. So far my battery is showing at 100%.
    Usually for me at the end of the day after a full charge in the morning, the battery meter would go down 1 bar. So i'll have to wait and see.

Maybe you are looking for

  • Is it possible to create an "interactive table" within acrobat?

    I am trying to create and shorten an existing large document, and one option that would be very helpful is to have a drop down table selection.  To elaborate: have a selection button that would allow user to select a specific option, then this option

  • Default Aggregation Rule

    Can someone explain me as to how BI interprets the default aggregation rule. Say when we say the defualt aggregation rule on the sales fact table column revenue is SUM. what does it actually imply. Similarly when we use the Aggregation Content tab in

  • What does this error message mean? "Blank Tab Multivariate Test Addon could not be installed because Firefox cannot modify the needed file."

    I am running Firefox 6 Beta and have now recieved 2 popups about the Blank Tab Multivariate Test. I finally found info on how to install it. However, when I went to the page suggested and tried to install I got the above error message. I want to know

  • Horizontal repeating frame

    Hello all, I am using oracle 9i forms and report.I have created one report in oracle report builder,that report alignment is perfect .the output of report like this. 1 2 3 4 5 6...........................................................31. it is comi

  • Stripping-off the leading zeros

    Hi Experts, I have a mapping requirement in which I need to map a  source field with a target field in which I need to strip off the leading say 4 zeros from the target field. Now, can this be done with standard PI functions available or we need an U