Iphone battery with new version 3.1.3
I notice a battery change with this new version once it is charged at 100 percent once i disconnect it it start to lose power and this iphone is not nearly a year old, my wife and I have 1 month differences, and her iphone last much longer than mine.
it also drains on your Brightness if its set too high.
check out http://www.apple.com/batteries/iphone.html for more info on saving battery life. Go down to *Optimize Your Settings*
Similar Messages
-
Replacement price of iphone 5s with new one
replacement price of iphone 5s with new one
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
Out-of-warranty pricing varies for Apple accessories such as adapters and Apple iPhone cases. Contact your carrier, Apple, or an Apple Authorized Service Provider for more information.
Warranty after service
Apple covers defects if they arise from authorized service for 90 days or the remaining term of your iPhone warranty, whichever is longer. -
HT4623 how can i get an older version of facebook for iphone 3g the new version isnt compatible
how can i get an older version of facebook for iphone 3g the new version isnt compatible with the current 3g IOS
If you didn't save an older version on your computer from a previous download, then there is no way to get one.
You can access the mobile web page through Safari. -
Can't able to syn own videos iPhone using the new version of iTunes 12.0.1
Can't able to syn own videos to iPhone using the new version of iTunes 12.0.1
Hi Hamedkhan,
Happy New Year! The resources below will show you how to sync your home videos to your iPhone using iTunes 12 for Windows:
iTunes 12 for Windows: Syncing overview
http://support.apple.com/kb/PH20342?viewlocale=en_US
Do I have to sync?
If you have iPod classic, iPod nano, or iPod shuffle: You have to sync your device with iTunes. There’s no other way to add content to it.
If you have an iOS device (iPod touch, iPhone, or iPad): You only need to sync your device with iTunes if you want to:
Add your iTunes playlists to your device (unless you subscribe to iTunes Match)
Add your own videos to your device
Add photos, contacts, and calendars to your device (if you don’t use iCloud)
Remove previously synced items from your device
If you prefer not to sync, you don’t have to: you can download items from the iTunes Store directly to your device, and—if you have a free iCloud account—use iCloud to make sure items like your photos, contact, and calendars are on both your computer and device.
iTunes 12 for Windows: Sync iPod, iPhone, or iPad
http://support.apple.com/kb/PH20343?viewlocale=en_US
iTunes 12 for Windows: Sync iPod, iPhone, or iPad
To add items on your computer to your iPod, iPhone, or iPad, you sync them using iTunes. You can have iTunes sync items automatically (which is the quickest option), or drag items to your device manually (which gives you more control)—or you can do both. You can also remove items from your device automatically or manually.
For more information about syncing, see Syncing overview.
Select items to sync automatically
Connect your device to your computer and click the device button near the top left of the iTunes window.
Select the type of content you want to sync (for example, Music or Apps) in the sidebar on the left.
Select the Sync checkbox, then select the items you want to sync automatically each time you connect your device.
Repeat steps 2 and 3 for each type of content you want to include on your device.
The bar at the bottom of the window shows how much space will remain on your device after you sync.
By default, iTunes syncs your device whenever you connect it to your computer. If you want to have iTunes ask you before syncing, do one of the following:
Require a prompt before syncing this device: Click Summary, then deselect “Open iTunes when this [device] is connected.”
Require a prompt before syncing all devices: Choose Edit > Preferences, click Devices, and select “Prevent iPods, iPhones, and iPads from syncing automatically.”
When you’re ready to sync, click Apply.
Tip: To automatically sync a connected device at any time, choose File > Devices > Sync [device name].
WARNING: If you delete an automatically synced item from your iTunes library, the deleted item is removed from your device the next time you sync.
Add items to your device manually
You can manually add music, movies, TV shows, apps, podcasts, and iTunes U lessons to your device. You can’t manually add photos, books, contacts, or other info.
Make sure your device is connected.
From anywhere in your iTunes library, begin dragging the items you want to add.
A pane with a list of connected devices appears on the left.
Drag the items to your device in the list until a blue border appears.
The items are added to your device.
Keep items from being automatically synced
If there are some items you never want synced (for example, if they’re too big to fit on your device), you can keep them from being synced.
You can also turn off automatic syncing for music, movies, and TV shows. You must do this if you want to sync iPod classic, iPod nano, or iPod shuffle with more than one iTunes library, or automatically fill your device with songs using Autofill (see the next task, below).
Connect your device to your computer.
Click the device button, then click Summary.
Do any of the following:
Keep individual items from being synced: Select “Sync only checked [items].” Then, deselect the checkbox next to any items in your iTunes library that you don’t want synced.
Turn off automatic syncing for music, movies, and TV shows: Select “Manually manage music and videos.”
Click Apply.
Fill your device with a random selection of songs using Autofill
If you don’t want to always hear the same music on your device, you can have iTunes fill it with a random selection of songs by using Autofill.
To use Autofill, you must turn off automatic syncing for music and videos (see instructions above).
Connect your device to your computer and click the device button near the top left of the iTunes window.
Click On My Device.
Select Music in the sidebar on the left.
Choose which songs you want to sync from the Autofill pop-up menu at the bottom of the Music pane.
To adjust Autofill settings, click Settings.
When you’re done, click OK.
Click Autofill, then click Sync.
Each time you use Autofill, iTunes adds different songs to your device.
Remove items from your device
Make sure your device is connected, then do one of the following:
Remove an item that was synced automatically: Do any of the following, then sync your device:
Deselect the checkbox for the item in your iTunes library, and select “Sync only checked [items]” in the Summary pane.
If the item was added because it’s part of a synced playlist, remove the item from the playlist.
Change your sync settings to keep the item from being synced.
Remove an item that was added manually or using Autofill: Click On My Device, select an item (or items), press the Delete key, and click Delete.
The types of content you can sync depends on your device. For more information, see the documentation for your device.
You can sync multiple devices with your iTunes library, and use different settings for each device.
Important: Before disconnecting iPod classic, iPod nano, or iPod shuffle from your computer, click the Eject button .
Sync and organize iOS apps
Add photos to iPod, iPhone, or iPad
Sync contacts, calendars, and other info with iPod, iPhone, or iPad
Last Modified: Dec 23, 2014
I hope this information helps ....
- Judy -
HT201263 How Can I Update My Iphone To The New Version Of IOS
How Can I Update My Iphone To The New Version Of IOS
Allan Eckert wrote:
Connect to a Mac
Or a Windows PC with iTunes installed. -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
Problem with new version 4.3.2 apps not working " after update to the new version "
Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards -
just replaced my iphone 4 with new 4. restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app
Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.
-
I need help syncing my iphone 5 with new Itunes software. It wont recognize my phone under the files tab and selecting devices they are greyed out as if it doesnt recognize the device
this worked for me.
PLUG your iPhone to PC and go here on your PC...Control Panel\Hardware and Sound\Devices and Printers. under unspecified you will see apple iPhone......right click on it and remove device. unplug your iPhone and replug it to your pc and iTunes should open and will see your phone. -
Xfdf and pdf works in Adobe Reader 6, but not with new versions 7, 8, X
I have a xfdf file which is created by querying a SQL data base and contains data for a pdf form; it works with Adobe Reader 6, but does not work with new versions of Adobe Readers (7, 8, 9 and X).
It is an intranet site running IIS 6.0 in Windows Server 2003 Web Edition SP2 with Adobe 6 installed and client systems include XPSP2, XPSP3, Vista, Windows 7 with different versions of IE, Firefox.
With new versions of Adobe Reader, click on the hyperlink launched the pdf form in a browser window without data; below is the link:
// create shipping slip hyperlink
string strLtrSlipUrl = "~/Archive/LtrShipSlip.pdf#FDF=" + lblWO.Text + "LtrShipSlip" + ".xfdf";
HyperLink hlLtrShipPdf = new HyperLink();
hlLtrShipPdf.Text = "Ltr Shipping Slip";
hlLtrShipPdf.NavigateUrl = strLtrSlipUrl;
hlLtrShipPdf.Target = "_blank";
pnlLtrShipSlip.Controls.Add(hlLtrShipPdf);
I have installed new versions of Adobe Reader in the Web server (to match what the clients are using), but results are the same – blank pdf.
I uninstalled the new versions and installed version 6 and the pdf and xfdf worked happily together, but we need new versions of Adobe Reader in the client computers.
Thanks for helps and suggestions – I have read articles about using iTextSharp to create pdf documents from .NET apps, but that would be my last choice.Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.
-
hi. if i replace my exicting iphone id with new id, does it effect my contacts, wil it formate all my contacts or not, please tel me
It is my understanding that if you delete the account per the instructions below, you will be able recreate, but you will NOT have access to the prior BBM contacts.
Read this for full information and suggestions to regain access to your BBID >> http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
You have to remember either the BlackBerryID password, or the secret question answer. Without either, you're stuck.
Your choices are:
--Use another email account to create an entirely new BlackBerryID (with which you will lose access to any purchased apps using the "forgotten" first BlackBerryID, or
--Find the initial email you were sent to confirm the initial BlackBerryID, and in it is a link to click to cancel and delete the account. Click on that, delete the account and then you can use that same email to create an entirely new account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to use track effects with new version of GarageBand
In the version of GarageBand before this one, you could access different effects that you could manage and apply to the different tracks. Each track had an area containing its set of effects that were either activated or deactivated. With this removed, i am not sure how to add those same kind of effects. I am aware of the new nobs that are provided in order to mix and edit trebles, bass, mid, etc., but i want to be able to add different effects such as voice transformer, flanger, chorus, speech enhancer, bit crusher, bass amp, track echo, track reverb, amplifier, etc. I desperately need help finding out how to do this, as this was a major part of my mixing and producing with GarageBand, and without these given effects, i do not feel as comfortable using GarageBand.
zachseiden wrote:
How to use track effects with new version of GarageBand
this may help:
http://www.bulletsandbones.com/GB/GBFAQ.html#replacemissingtrackeffectsgbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen) -
how to view and restore sharepoint 2013 designer workflows and how to redeploy with newer version to environments
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint LeadHi,
In SharePoint Designer 2010, we could not save the workflow as a template directly except the reusable workflow.
However, in SharePoint Designer 2013, we can just save all the types workflow as a template, then you can import the workflow into the new environment.
http://blogs.msdn.com/b/workflows_for_product_catalogs/archive/2012/11/02/deploying-a-workflow-on-a-different-server.aspx
In SharePoint Designer 2013, every time we publish the workflow, we would get a newer version workflow, and the old workflow version would be overwritten.
So, when you deploy the workflow in the environment, the workflow would the newer version.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
I'm trying to update my iphone 3g with software version from 2.2.1 (5H11) to 2.2.1 and an unknown error occurred (-1)
eepereira wrote:
an unknown error occurred (-1)
That Error message is indicative of a Hardware issue. The Device may need Service. Take it in for evaluation. -
Trying to update laptop with new version of I tunes, but it is telling me that I am on a network that is not available. I cant even uninstall I tunes to re-install either? Help
Hey JAK Entertainment,
Thanks for the question. I understand that you are experiencing issues with installing/uninstalling iTunes. The following resource may provide a solution:
"The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows
http://support.apple.com/kb/TS3704
Additional Information:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks,
Matt M.
Maybe you are looking for
-
This problem started a couple of months ago. I only receive about 25% of my inbox when I login remotely to the webmail exchange account. My inbox on my office PC is fine but the emails do not display in my inbox when I login to the webmail exchange a
-
Ex_me_process_req_cust~process_header: How to Get Acct Assignment Data
I've created a custom class to use this BADI interface. Inside this process_header method I get the Purchase Requisition's item data, I now need to read the Purchase Requisition's account data, particularly the GL Account Number, and then change it.
-
In Pivot view i need to arrange graphs horizontally but not vertically
Hi Experts, I have a serious problem of placing graphs horizontal when i place 1 of the colums in section. graphs have been made vertically rahter than horizontally.. does any 1 have a solution regarding this please share.. thanks a lot regards Prana
-
Report to get all the infotype maintained for pernr.
Hi all Experts, i wanted to know whether there is any report which gives all the infotype which are maintained for some pernr. Thx. Raj.
-
I have a Mac OS X 10.6 Snow Leopard. When on Face Time to my brother in Canada I could hear him but he wasn't able to hear me. We've both checked our Audio systems which seem to be in order. Please could someone help? Thanks.