Iphone been hang for hours until battery flat! any solution to off it ???

when i surf the net half ways, the iphone 3G jsut hang on that page with the lights on. Just cant press any button to off it or do anything on it include put a charger on it. The phone become so warm and finally automatice off it after 2 hours as battery flat.
Is there any ways to off it if happen again?

Reboot phone. Hold down home and sleep button together until the apple logo appears (ignore the red slider which appears before this) release and the phone will reboot. This solves most problems.

Similar Messages

  • TS3217 This song skipping bug on iPods has been around for years!  Is there any solution yet?

    I've tried resetting my iPods.  (I've got 3 Classics, 2-80gb, 1-160gb)  I've tried 256kbps, 190kbps, and 128kbps compression rates.  All using AAC, all synced with a Mac Mini with Mountain Lion and the latest software for iTunes and the iPods.  It doesn't seem to matter what I try, all three of the iPods have the issue- they'll be playing fine, then they randomly stop prior to the end of a song, and skip to the next one.  The original songs are fine on the computer.  I've tried syncing with a different computer that has a different backup drive storing the song.  It still happens.  I've deleted songs, downloaded them from iCloud, and it still happens.  Is it just the iPod Classics, or does this happen on solid state iPods as well?  Is there any sign of a fix?  I've got over 12000 songs, and I'm kind of committed to this format, since Apple has pretty much killed all the portable music player competition.

    I've been told by Verizon business team that Sumsung and Verizon are working on a fix. Of course, that could be one month or 12 months.
    My wife and I have a Samsung S3 and Note II and both, on Jelly Bean have the same flaw. It's very frustrating. I carry with me an unlocked HTC and also Verizon Incredible 2. Since SIM Data plans are cheap enough in most countries, I just get additional SIM cards with a data plan and turn on the hotspot feature of these devices with I access from the S3 and NOTE II. Not ideal, but close enough for now.
    In the UK, I am hoping the LTE capabilities will work (VodaFone UK is imminent).

  • TS3681 the device displays the Apple logo with no  progress bar for 8 hours until battery run flat.

    My Iphone4 displays the Apple logo with no progress bar for 8 hours until battery went flat this was after i try to make an up date know the  i tunes dosent reconise my phone.
    Can you please help me
    Thank you.

    http://support.apple.com/kb/ht1808

  • My Iphone still hanging for 9 hours while doing security backup for actualization...

    My Iphone still hanging for 9 hours while doing security backup for actualization... Can anyone help?? And also cannot find backup file..

    Now it's Wednesday (2 days since I originally posted) & my iPhone appears to have finally restored all my apps, but it still says it's restoring from iCloud backup.  If all my apps are restored, what else could it be restoring?  IS it actually restoring anything at this point, or is it still in 'glitch' mode???  I've tried turning it off & back on & it continues to say that it's restoring.

  • When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves

    When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?

    You may have lost your connection to the apple server or connection with your itunes library.
    1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
    2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
    3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
    4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
    Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
    If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
    this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
    in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
    Give it a shot!
    if this helps you and works ...why not rep/like my response up!

  • HT201210 I upgraded to the io6. I'm stuck in the apple sign-in screen. It keeps timing out. I've been stuck for hours. Help

    I upgraded to the io6. I'm stuck in the apple sign-in screen. It keeps timing out. I've been stuck for hours. Help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    or maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have two iPads and giving one to my grandson. Using my Apple id for both, can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

    I have two iPads and giving 1st gen. to my grandson. Using my Apple idI for both... can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

    Look at this link.
    Giving your former iPad to a spouse or family member: the quick guide
    http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • Analyze table hangs for hours

    Hi,
    Analyze table hangs for hours (more than 6 hrs) using DBMS_STATS.GATHER_TABLE_STATS.At last we killed the session and then rerun it.it runs succesfully completed.
    Why DBMS_STATS.GATHER_TABLE_STATS hangs for hours for some time?
    is this issue arise due to the GATHER_STATS_JOB schedule or any other issue?
    please help me.
    Thanks,
    Michael Holding

    holding wrote:
    Analyze table hangs for hours (more than 6 hrs) using DBMS_STATS.GATHER_TABLE_STATS.At last we killed the session and then rerun it.it runs succesfully completed.It could have been waiting on a locked table when killed. And then when restarted, it could have found the table unlocked.
    Why DBMS_STATS.GATHER_TABLE_STATS hangs for hours for some time?As Boneist said.. the wait states and events of the session would have shed light on that.
    is this issue arise due to the GATHER_STATS_JOB schedule or any other issue?Dunno... insufficient data to accurately compute. (except for making guesses like above with table being locked and then unlocked)
    please help me.Don't kill a "+stuck/hung+" session before looking at what it is busy with (events) and what it is waiting on (wait state)?

  • From apps. store I downloaded Instagram and its been installing for hours.  I can't delete

    from apps. store on iPad I downloaded Instagram.  It's been installing for hours.  I can't install it or delete it.  Does anyone know what I can do?

    Look at this link.
    Giving your former iPad to a spouse or family member: the quick guide
    http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • My Ipod have been loading for hours and it never change how can i fix it?

    At first i was playing games for 1 hours then my ipod died and it been loading for a long time and still not turn off. How can i fix it?

    Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • My ipad will not turn on/charge, itunes will not recognize ipad, has been charging for hours power and sleep button did not work

    My ipad will not turn on/charge. has been charging for hours. Itunes will not recognize it and i have tried the power/sleep button as well. PLEASE HELP!

    Please tell me that it has NEVER been jailbroke.  If it hasn't been, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

    I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good.  Once I disconnect the Express, everything is good again.
    I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension.  Most of the time I get an error trying to update the Express.  But when it seems to be set up perfect, the entire house can't get to the internet.  Just when it looks right, it is so wrong.
    If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it.  I'm left to the conclusion that the Express is faulty.  I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

    I finally got it working.  I was trying to set it up ethernet.  My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode.  So everything I initially tried always resulted in 'wireless'.  Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it.  So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
    So here's the weird part.  When I finally tried 'continue' (vice manual), I would get 4 options.  One would be 'ethernet' extended.  So I would select it, it gave me green lights, all looked good, and still the same problem.  This is when I got frustrated.  I thought I had exhausted all possible combinations.
    But somehow when trying continue again after another restore, I only got 3 options.  One was the same ethernet extended option (can't remember what the missing 4th one was).  And this time it worked - it gave me the big green circle with the checkmark saying it was successful.  I don't know what I did different, but I know now that it won't work if 4 options come up to choose from.  It will work if only 3 options come up.  And success if only verified by the big checkmark.  Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
    As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it.  Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with.  It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
    Thanks for the response.  I really do appreciate it.
    Aiport Extreme Gen5 - internet access and router
    Airport Express Gen2 - connected via ethernet, extending my wireless
    - configured while connect directly to the Extreme, but now on a switch (16-port hub)
    Using Airport 5.6.1
    1) Restore Defaults from Base Station menu
    2) Following restart, Select Continue
    3) Of the 3 option presented, select 'ethernet.... extend network...'
      - if 4 options are present, may not work
    4) Wait for the green circle with the big white checkmark.
    5) Connected Express to the switch where a cable went to other end of house - works.
    Dead-zone went from 2mbps to 24mbps.
    I probably spent 4 hours chasing my tail in anger.  The correct way took about 5 minutes total.
    Thanks again.

  • I was creating an iWeb page, had been working for hours, I suddenly got a blank screen and it was gone. Can I recover my page?e

    I was creating an iWeb page, had been working for hours, I suddenly got a blank screen and it was gone. Can I recover my page?

    hmmm. it might be worth checking through the following document:
    Fifth Generation iPod has a blank backlit display and beeps 3 times

  • 'iphoto will open as soon as the iphoto library is available. Time machine might be backing it up" - message been cycling for hours now. Can't access anything in photos

    Up till yesterday, our iphoto was working correctly. At one point, I noticed the slideshow wasn't displaying, so I opened iphoto and the message said there was a newer version, so I selected upgrade. The next message said the library needs rebuilding. Selected rebuild. Next,
    I got the message in the header, and it's been cycling for hours now with no result. I'm not computer friendly, so I could use some help.

    Thanks for the reply.
    I was wrong - the OS is 10.6.8. Is that old, too? I don't know where to find the version of iphoto I had and which one is trying to upgrade. Where would I find that. I restarted and still the same message.
    "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." selected upgrade:
    "iphoto is unable to open this library. The library has issues that require rebuilding. The iphoto library is missing required database files and must be rebuilt before it can be opened" selected rebuild:
    Next message is: "waiting for iphoto library...will open as soon as library is available. Time machine might be backing it up" and cycling.....
    During this time, the iphoto file is unavailable, all options greyed out.
    I have an external hard drive connected and time machine is on.
    Like I said, not literate with computers, so I hope I'm giving the right information

  • I went to turn on my device but it says i need to activate it even though i already did like 2 years ago and when i go to put in my apple id to reactivate it it says the activation servers are down but ive been trying for hours I 3 runon sentences.

    i went to turn on my device but it says i need to activate it even though i already did like 2 years ago and when i go to put in my apple id to reactivate it it says the activation servers are down but ive been trying for hours I <3 runon sentences.

    Wow!

Maybe you are looking for

  • Can no longer edit info on multiple items

    It is so frustrating when an update makes some new change that takes away major functionality.  I have a folder of movies in itunes, a genre really, called "home movies".  I want to select them all and change something on them.  In this case, change

  • OS Mountain Lion won't install on disk (Linux partitioned)

    I just downloaded Mountain Snow and apparently It doesn't recognize the hard drive in which to install it because it doesn't look at the partition table but just at the hard drives. I have got a mac with a triple boot (Mac OS on sda1, grub on sda 2,

  • Are the height and width (h and v) values switched?

    I have been exporting .avi video through the Export>>Movie dialogue box. My intended settings are for the width (v) to be 640 pixels and the height (h) to be 480 pixels with a square aspect ratio. I have found that after exporting there is a large bl

  • Dock is missing and unable to command+tab thru programs

    Hey there, i'm running a powerPC G5 - and one day my dock just disappeared. Not only that but i found that i am now no longer able to "command+tab" thru the active programs. Is there a problem w/ my finder? My current system is 10.4.11 Thanks

  • On board programming

    Hi, I made an application using c for a PCI 7350 which was not on-board. Now I want to modify it so that the application can run on-board. I am calling all the load parametrs and flex_start functions in subroutines like doMove1(u8& boardID) etc. void