IPhone black screen

my iPhone 4s is on and has a black screen, i have reset it, restored it, and it is fully charged but the screen is still black. When it is plugged into itunes it beeps every 6 seconds.

LCD is not working properly.. Looks like the pads on the logic board are missing.. You may need to get a new logic board or may even get a replacement device.

Similar Messages

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

IPhone- black screen, reboots on own, will not start

Hi! HELP! I updated my software yesterday or today (cannot remember) to iOS 7.1.2, and now my phone keeps rebooting itself after it automatically locks. (I dpn't know if the software update is related to my phone not working) The screen turns black and nothing is on the display, however the phone is still on. I can occasionally hear incoming texts, also when called, phone does not go straight to voicemail. My iPhone will occasionally let me restart it by holding down the home and power button. If I get the phone to work and come on, I cannot lock it, otherwise this problem starts all over. WELL, I accidentally made the mistake of locking it, and now it won't do anything! Also, phone is not recognized by iTunes! Pleeeeeeeeeease help

Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.

IPhone Black Screen - Restore Doesn't Help

I've just bought an iPhone 3GS from a friend and I have no sim card for it. It will connect to iTunes after a hard restore and the silent/loud toggle makes it vibrate, but the screen will not come on. I've factory restored it as well using iTunes but still no response. Help!

Take it to the Apple Store and ask them to check it out

IPhone 5 frozen on black screen but "hard restart does not work

My iPhone 5 is frozen on a black screen and buzzes when i plug it in but when i connect it to my computer to attempt to reset it on iTunes, it does not appear on my computer. I tried a "hard restart" but my sleep/wake button is broken can anyone help

Hello there, vsanfilippo2.
If you're iOS device isn't recognized at all on your computer, then the following Knowledge Base articles provide some great troubleshooting steps to follow, depending on the Operating System running on your computer:
iOS: Device not recognized in iTunes for OS X - Apple Support
or
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

HT201263 MY IPHONE 5 WILL NOT CHARGE AT ALL AFTER THE BATTERY RAN OUT. ITUNES IS NOT PICKING UP THE IPHONE AND TRIED SEVERAL GENUINE CHARGERS AND STILL IS NOT CHARGING JUST A BLACK SCREEN. THE PHONE HASN`T BEEN DROPPED OR GOT WATER IN IT. IT ONLY 12 MONTH

I have the Iphone 5, it is just over 12 months old, and it was low on charge, by the time I could get to a charger it had cut out. So i plugged it in the charger like no other time, went back after 10mins and noticed the screen was still black. So i tried to turn it on but nothing still black screen, i changed the charger for my other apple charger and the same thing happened. i decided to plug it in using the usb in the computer and still the same thing has happened. Took it to the apple genuis team to be told they can`t do anything, and now its out of its 12 months warranty makes it even more difficult. Has anyone else had this issue, this is my 4th iphone since they released them and am very dissappointed to say the least that the iphone 5 for me seems to have a life span on just over 12 months and no one is prepared to take any responsiblity as i have not damaged it. One extremely dissappointed Iphone user. Any ideas on how to get it working again?

Hey jojo-10!
Here is an article for you that can help you troubleshoot this issue with your iPhone:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Thanks for coming to the Apple Support Communities!
Regards,
Braden

My iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black

my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??

christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702

I am using an iphone 3Gs and Itunes won't allow me to restore it?!?! help me fix my black screen of death!

Ok, I am trying to restore my iPhone 3Gs to 5.0.1 and when I do, it looks like it is going well until it says that is it preparing to restore, it keeps me stuck at that spinning bar and then after a while it gives me the error 1601 unknown error has occurred. I have tried looking on Google for over 3 hours now trying to find the answer to my problem and sadly I cant find one, I am trying to restore my IPhone because earlier I was playing with it and it ran out of battery and I let it change and walked away form it, I came back 1 hour later and it was still at the boot logo of apple, I waited 2 hours and it did nothing, just stayed with the boot logo. I then put it into DFU mode and it appears in iTunes as in DFU mode and can be restored but like I said above that it just gives me an error. I have looked into Google and tried every way possible and found out that I may have the black screen of death. If you have this problem and found a way other than getting a new iPhone, please contact me on this page because I am not in the mood to buy a new iPhone because this one has an expired warranty.
Also i have tryed all the things in the error support page and nothing works, uninstalled itunes completely and did all that other stuff but still the same problem and i have not found a way to fix this.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Is there a way to set the iPhone to have a black screen with white text?

I found the "Invert Colors" option under Settings > General > Accessibility, and like it a lot. It provides enhanced readability.
The problem is that it inverts all colors, even for apps. So when I view a web page in Safari, all the colors are inverted for the images.
And when I view my photos in Photos, these are also inverted as well.
Is there a way to set up the iPhone to default to a black screen and white letters for the OS, but allow the apps and photos, etc. to
be viewed in their regular colors. For example, can I run Photos to view my photos on a black background but view the photos in their
normal coloring?

I'm afraid that is not possible, maybe this could bee a step in that direction if you use the mentioned Zoom function:
Invert Colors and Grayscale
Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read.
Invert the screen colors. Go to Settings > General > Accessibility, then turn on Invert Colors.
See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom window—see Zoom on page 150.
copied from page 151 of the user guide iOS8

My iphone 5 has a black screen and is unresponsive and it also has a broken lock button can anyone help?

I have an iphone 5 that ive had for two years. i plugged it in for the night to charge, and when i woke up it had a black screen. i tried to wake it up using the home button since my lock button does not work. ive tried to hold the lock and home button down for a certain amount of time, but it doesnt work, and im not sure if its the lock button or if my phone is just burnt out. please help.

Hey there mafro37,
Welcome to Apple Support Communities.
The articles linked below will help you troubleshoot the issues that you’ve described, where both the Sleep/Wake button isn’t responding and the iPhone 5 only displays a blank black screen.
Get help with buttons and switches on your iPhone, iPad, or iPod touch - Apple Support
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
Take care,
-Jason

How do I get my iPhone 5c out of black screen recovery mode?

I have been trying for countless hours and days to get my iPhone 5c out of recovery mode (black screen no apple logo or anything else) the only reason I know it turns on is because the backlight LCD changes color. When I press down on it it leaves a little finger pressure thing. I have tried all of the ways to get it out of DFU mode, Out of Recovery Mode, I have tried restoring it, in which case i get the error 4005,40013 etc. So now I have come here for my last hoorah on trying to get this pile out of recovery mode and the IOS installed and working.
I don't know if this matters or not but, I have recently purchased a screen from ebay, it was an original iPhone screen etc. I have replaced it and as i said the screen works fine. that shouldn't have any problem with the actual software malfunctioning to update, but here is the log! Enjoy!
All help is greatly appreciated and I will do my best to give credit where it is deserved in the future! God Bless!
2014-07-08 23:05:05.000 iTunes[796:707]: restore library built Jan 31 2014 at 16:40:15
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: iTunes 11.2.2
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: Software payload version: 11D257 (option key)
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: Using MobileRestore state machine
[23:05:52.8450] Successfully applied power assertion
[23:05:52.8454] Changing state from 'Idle' to 'Restoring'
[23:05:52.8692] amai: AMAuthInstallSsoInitialize: can't find SSOClient.framework
[23:05:52.8695] requested restore behavior: Erase
[23:05:52.8698] requested variant: Erase
[23:05:52.8822] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.4330] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[23:05:53.4334] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0x6000002b7ac0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4339] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0x6000002b7460 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4344] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0x6000000bf680 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4349] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0x6000002a13e0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4354] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0x6080000b40a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4359] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0x6000002a88e0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4364] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0x6000002af720 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4369] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0x6000002b6380 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4374] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0x6000000bcaa0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4379] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0x6000002b1760 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4384] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 0x6000002ac240 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4388] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0x6000002b0bc0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4392] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 0x6000002b5cc0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4396] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0x6000002b0740 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4400] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0x6000002aa980 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4405] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 0x6000002b1340 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4408] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0x6000002b13a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4412] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0x6100000b5600 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4416] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0x6000008531a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[23:05:53.4419] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[23:05:53.4422] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedBundle_E7EE0982-00C0-4513-B599-39C008B08D9C/am ai/debug/tss-request.plist
[23:05:53.4425] amai: AMAuthInstallHttpMessageSendSync: httpRequest=<CFHTTPMessageRef 0x61000016fc00(0x61000016fc10)> { POST request, priority -1, url http://gs.apple.com:80/TSS/controller?action=2 }
[23:05:53.9574] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[23:05:53.9640] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedBundle_E7EE0982-00C0-4513-B599-39C008B08D9C/am ai/debug/tss-response.plist
[23:05:53.9676] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[23:05:53.9709] iBoot build-version = iBoot-1940.10.58
[23:05:53.9716] iBoot build-style = RELEASE
[23:05:53.9720] requested restore behavior: Erase
[23:05:53.9731] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9735] requested restore behavior: Erase
[23:05:53.9747] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9751] unable to open device_map.txt: No such file or directory
[23:05:53.9937] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:53.9941] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:53.9945] DeviceRequest failed: 0xe000404f
[23:05:53.9949] command device request for 'getenv radio-error' failed: 2008
[23:05:53.9952] radio-error not set
[23:05:53.9955] unable to open device_map.txt: No such file or directory
[23:05:53.9958] <Recovery Mode Device 0x60800014bf20>: production fused device
[23:05:53.9961] requested restore behavior: Erase
[23:05:53.9965] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9968] requested restore behavior: Erase
[23:05:53.9977] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:54.0270] <Recovery Mode Device 0x60800014bf20>: operation 4 progress -1
[23:05:54.0553] bootstrapping restore with iBEC
[23:05:54.0557] requested restore behavior: Erase
[23:05:54.0568] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:54.0673] <Recovery Mode Device 0x60800014bf20>: operation 31 progress -1
[23:05:55.0687] <Recovery Mode Device 0x60800014bf20>: Recovery mode succeeded
[23:05:55.0692] Finished Recovery Restore Phase: Successful
[23:05:55.1899] Recovery mode device disconnected
[23:05:55.1903] Device removed when in state Restoring, moving device to transition state
[23:05:55.1906] Changing state from 'Restoring' to 'Transitioning'
[23:05:55.1909] Creating timer to monitor transition
[23:05:57.3207] Recovery mode device connected
[23:05:57.3210] Transitioning device returned, continuing restore.
[23:05:57.3213] Canceling timer
[23:05:57.3217] Changing state from 'Transitioning' to 'Restoring'
[23:05:57.3220] requested restore behavior: Erase
[23:05:57.3223] requested variant: Erase
[23:05:57.3227] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.6937] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[23:05:57.6941] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[23:05:57.6945] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[23:05:57.6950] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[23:05:57.6953] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[23:05:57.6957] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[23:05:57.6961] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[23:05:57.6964] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[23:05:57.6968] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[23:05:57.6971] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[23:05:57.6975] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[23:05:57.6978] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[23:05:57.6981] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[23:05:57.6984] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[23:05:57.6987] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[23:05:57.6991] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[23:05:57.6994] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[23:05:57.6997] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[23:05:57.7000] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[23:05:57.7004] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[23:05:57.7007] iBoot build-version = iBoot-1940.10.58
[23:05:57.7011] iBoot build-style = RELEASE
[23:05:57.7015] requested restore behavior: Erase
[23:05:57.7018] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7022] requested restore behavior: Erase
[23:05:57.7025] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7029] unable to open device_map.txt: No such file or directory
[23:05:57.7033] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:57.7036] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:57.7040] DeviceRequest failed: 0xe000404f
[23:05:57.7043] command device request for 'getenv radio-error' failed: 2008
[23:05:57.7047] radio-error not set
[23:05:57.7050] unable to open device_map.txt: No such file or directory
[23:05:57.7054] <Recovery Mode Device 0x60800014d1b0>: production fused device
[23:05:57.7057] requested restore behavior: Erase
[23:05:57.7061] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7065] requested restore behavior: Erase
[23:05:57.7068] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7325] <Recovery Mode Device 0x60800014d1b0>: operation 4 progress -1
[23:05:57.7714] unable to open device_map.txt: No such file or directory
[23:05:57.7719] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:57.7722] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:57.7726] requested restore behavior: Erase
[23:05:57.7733] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7738] requested restore behavior: Erase
[23:05:57.7750] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7754] <Recovery Mode Device 0x60800014d1b0>: operation 42 progress -1
[23:05:57.7758] requested restore behavior: Erase
[23:05:57.7767] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:58.8029] <Recovery Mode Device 0x60800014d1b0>: operation 5 progress -1
[23:05:59.1074] unable to open device_map.txt: No such file or directory
[23:05:59.1078] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:59.1082] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:59.1086] DeviceRequest failed: 0xe000404f
[23:05:59.1089] command device request for 'getenv ramdisk-delay' failed: 2008
[23:06:00.7244] <Recovery Mode Device 0x60800014d1b0>: operation 6 progress -1
[23:06:01.7350] <Recovery Mode Device 0x60800014d1b0>: operation 7 progress -1
[23:06:02.0286] <Recovery Mode Device 0x60800014d1b0>: operation 8 progress -1
[23:06:02.0290] unable to open device_map.txt: No such file or directory
[23:06:02.0294] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:06:02.0298] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:06:02.0301] <Recovery Mode Device 0x60800014d1b0>: operation 9 progress -1
[23:06:02.0305] <Recovery Mode Device 0x60800014d1b0>: Recovery mode succeeded
[23:06:02.0308] Finished Recovery Restore Phase: Successful
[23:06:03.2217] Recovery mode device disconnected
[23:06:03.2220] Device removed when in state Restoring, moving device to transition state
[23:06:03.2223] Changing state from 'Restoring' to 'Transitioning'
[23:06:03.2226] Creating timer to monitor transition
[23:06:29.9952] Restore completed, status:4013
[23:06:29.9952] Failure Description:
[23:06:29.9952] Depth:0 Error:Unexpected device state 'Recovery' expected 'RestoreOS'

I ran into the problem you have after trying to update to 7.1.2 the phone updated, but got stuck in recovery mode, and none of the reset methods worked. I did some searching and came up with a simple method, and it got me out of the loop.
Once i used this app, My phone booted and The update was in place.
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/

I have an iphone 4s why does it have a black screen instead of my background picture when I get a text message?

I have an iphone 4S why does it have a black screen instead of my background picture when I get a text message?

When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.

My iPhone has a black screen!

Hello apple community. My dad just sent me a used iPhone 4s for my birthday about 1 week ago. Today I was using my iPhone and I went to eat and left my phone on my bed. Then when I came back , I tried turn it on and it didnt turn on. It has a black screen but it functions properly. It might be a display screen error or something. I tried the famous method of pressing the home button and the power button at the same time for like 10 seconds but it still wont work. I also plugged it in on my computer and it shows everything on there but my iPhone screen is still black. I hadthe same problem earlier when I got the phone but it turned on after a little while of charging it. What is going on? I live in a small town in Mexico and there are no Apple stores nearby! What should I do? Please I really need your help on this issue. Thank you very much for your attention and hopefully you guys can help me.

Hello there, Kevin Barreto.
To make sure if it is a hardware issue or not, the following Knowledge Base article should help guide you further:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Specifically the section on:
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

IPhone black screen

Similar Messages

Maybe you are looking for