Iphone burned via charger. It is working but not charging.
I connected my iphone to mac for sycronization. In one minute I got a massage on my desktop that one of the USB ports is overheating. I felt a burning smell and disconnected my iphone immidiatly. Niether charger nor iphone itself have been burned but it is not charging anymore. I think a charging part inside the phone was burned. Iphone worked till the battary was exausted. Did anyone had the same problem? Why did it happen? Is it possible to fix the phone?
I think the sequence is backwards. Something in your phone short-circuited, which caused the overcurrent protection in the Mac USB subsystem to shut down. Your phone broke first, it wasn't the computer that broke the phone. You need to get it repaired or exchanged, hopefully under warranty.
Similar Messages
-
My macbook doesn't connect to the Wi-Fi at home while my iPad connects to the same Wi-Fi. When I try connecting my macbook to my iPhone's personal hotspot, the internet works but the issue is connecting my macbook to the Wi-Fi. Please help!!
I don't understand how to fix this and I don't seem to understand where the problem is coming from.Let's try the simple approach first. Restart your router. Any change?
-
Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging
Troubleshooting MagSafe adapters http://support.apple.com/kb/ts1713
If you need to pursue further you can do it on-line, start here
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
ThanksLiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well... -
Why can I charge me iphone with my car's usb port but not my ipad?
Why can I charge my Iphone in my car using USB connection but not my Ipad?
Because the iPad requires a lot more power to charge than your iPhone, and typically car and computer USB ports simply don't proivide that much.
Its the same reason your iPhone comes with a 5Watt charger (and even then the iPhone only uses part of that) while the iPads come with the 10 or 12 watt charger.
They just need more power. -
can't sync ical on my iphone and imac. email and note work but not ical. can anyone help.
thanks
bmoreimacSo how can i make it work that way, i asked one of my friends, and she says it works like that...when she delete the email on her iphone it is deleted on the mac too, what do i do to change this?....my mail it's hotmail, i don't know if its relevant
-
TS1702 facetime on my iphone works but not on my ipad
Facetime on my iPhone 4S works but not on my iPad (3rd or 4th Gen)
From the iPad User Guide:
To use FaceTime, you need an Apple ID and a Wi-Fi connection to the Internet. When you open
FaceTime, you may be prompted to sign in using your Apple ID, or to create a new account.
Make a FaceTime call: Tap Contacts, choose a name, then tap the phone number or email address the person uses for FaceTime.
You can also make a FaceTime call from the Contacts app.
Rotate iPad to use FaceTime in either landscape or portrait orientation. To avoid unwanted orientation changes, lock iPad in portrait orientation. See Portrait and landscape orientation on page 20. -
I have apple iphone 5, today morning mobile is working but there is no light at all, i cannot see anting. how can i restart my phone
Hold the power button and the home button at the same time.
UNTIL the Apple logo appears then release, can be up to 30 secs -
Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change. -
Just bought an iPhone 5C.. Safari is non-functional! A blank frozen screen... What gives? Safari is Apple's browser for gods sakes! Google Chrom works but not Safari? This is nuts. This is an "upgrade"?? Anyone else experiencing this? Or should I just give up and return this
Are you always like this?
First try a Reset: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons. -
I dropped my iphone 4s in water and everything works but the backlight. I have heard rumors that I can take my damaged iPhone into an apple store and trade it in for a new phone and pay the difference. Is this true?
Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price.
-
or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
iphone 4
SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using
hope will never return. ThanksWe checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
My volume down button doesn't work on my iPhone. The UP buttown works, but not the down button. I have tried a hard reset and that didn't fix it.
Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt -
Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.
Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.
Maybe you are looking for
-
I am having a problem updating my iTunes. I get a message that says "the feature you are trying to use is on a network resource that is unavailable. Can anyone tell me how to uninstall iTunes? I get this message either when I download a new iTunes or
-
Should I dispute or let it go.
I have been given several different pieces of advice from various friends on this subject so I thought I would ask some advice from persons in the know. My chapt 7BK was D/C in Nov 2012. I have no collections. No late pays since 2012. I have 3-4 acct
-
HI Guru's I am sending PO through EDI.I am entering the order unit as FT3 (Cubic Feet) but in the idoc it is displaying as FTQ for the Segment E1EDP01 for the field MENEE.Can somebody explain me how this unit is getting converted. Thanks in advance
-
How to trace AAE mappings (UDF)
Hi, i have a PI 7.1 and some scenarios use the advanced adapter engine (AAE). However, i have some UDF in my mappings which seem to work different when in test mode (test tab in Integration Builder) and during runtime. So i need to write information
-
Add validation in login using :p1-1_user_name
Hi, Is it possible to add validations in login ? I can't uses the :p101_user_name value to validate, the value is still unknown. Is there a way ? Regards, Raanan.