Iphone camera issue when using flash

camera takes photo when flash is off. when we use flash, no matter what we do, the photo is all white

Is there a case on the iPhone? Is it designed for that verison of the iPhone? What color is the case and what color is the back of the phone? It is possible this "wash" is being caused by a reflection of the flash on the case. This can reflect back on the camera lens and wash out the picture.

Similar Messages

IPhone 6 and 6 plus camera extremely slow when using flash

I have noticed that the iPhone 6 and 6 plus camera is extremely slow when using flash, it is definitely slower than iPhones 5 and 5s.
Any explanation/solution for this?

I Have done some more testing and it seems turning off HDR resolves the issue

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

When using flash player for games, the mac runs real slow

When using flash player for games, the mac runs real slow. It's also not the fastest at anything. Can I do anything to speed stuff up ?????

Have no clue. You provided no details and your system profile is blank.
Which os are you using?
How are you connected to the internet?
Have you contacted your isp to make sure the slowness is not coming from their end?
Max out your ram.
How large is your hard drive and how much hard drive space do you have left?
You you using the latest version of Adobe Flash?
Please describe in detail all you have attempted to do in order to resolve the issue.

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

The settings box is always in the middle of my screen when using Flash Player , Won't close?

The settings box is always in the middle of my screen when using Flash Player , Won't close ?

See:How do I do a clean install of Flash Player?
It should work ok after that.

Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?

The documentation for Flash Builder 4 beta says that after opening flash from flash builder, I should click a "done" button in flash and flash should close and what I created in flash should be included as a component or container in Flash Builder. Using the Flash Builder 4 beta on Windows, when I click on the "create in flash" button on the properties panel for either the new flash component or container, Flash CS4 opens, I create something in Flash and no "done" button is present. Nor is anything present in the menus resembling a "done" option. Where is it?

Hi Jeffrey:
Still no done button. Now under commands in Flash I can convert symbols to flex components and containers and these show up in the Flash library.
Thanks:
Jim
Date: Wed, 30 Sep 2009 09:58:10 -0600
From: [email protected]
To: [email protected]
Subject: Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
Hi,
You may need to install FlexComponentKit.mxp to your Flash CS4 beforehand.
Jeffrey
Date: Tue, 29 Sep 2009 17:04:36 -0600
From: mailto:[email protected]
To: mailto:[email protected]
Subject: Flex Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
I apparently didn't get one. I've looked under various workspace configurations. Another thing that seems odd is that when Flash opens I get the opening panel that allows me to select the type of file and version of AS I want to use. I select new file with AS3. Any ideas on why the "done" button wouldn't be present and if the opening panel is what I should expect on opening Flash after clicking the "create in Flash" button?
>
>

TS1398 my iphone turned off when using wifi

my iphone turned off when using wifi

That sounds like you have internal damage in the SIM card slot. Try taking the phone to an Apple store for evaluation. Make a genius bar appointment first at http://apple.com/retail.

Support for safety camera locations when using off...

I've seen people manually post the file (as text) that you can put in the relevant folder on your phone's data card - but is there any ongoing support for safety camera updates when using your phone's mapping / sat nav offline (ie no data usage)?

Jaff0 wrote:
Doesn't seem like there's any option through the PC map loader program, so the only option seems to be if anybody has posted the file - which may not always happen?
Safetyspots are not updated that often and I am sure someone on the forum would try to help you out if you asked.
Happy to have helped forum with a Support Ratio = 42.5

Firefox being slow when using Flash

When using Flash in Firefox its becoming very slow or unresponsive. Could this because of to many addons ? if not is there any other reason ?
== URL of affected sites ==
http://

it's about flash plugin , the adobe shit technology ... i playing some games in flash , online games, then my firefox is freezing , and when i close firefox i checked in start/run this commands.. 1.) cmd then i write 2.) netstat -ano i find all that ports open from firefox .
flash causes errors and is freezing firefox

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

I encountered a problem when using Flash Player V9.0.115, can somebody help me?

Hello all, can somebody help me?
I have encountered a problem when using Flash Player
V9.0.115. Your help would be greatly appreciated.
The problem described as follows:
1. The flash file with sound works well before uploaded to
website. The audio lost when uploaded to the website(There is no
problem with the flash file size). I have uploaded the flash file
to website for you to test. Please go to
http://www.sameshow.com/democreator/create
a new site.swf and kindly check with it.
2. When we open the flash movie in IE with Flash player
V9.0.47 and previous versions (Flash9d.ocx), the flash movie with
sound works well.
3. When we upgrade the flash player to the latest version
V9.0.115 (Flash9e.ocx), the video works well, but the sound just
can play several seconds and then stop.
4. On Flash Player ocx V9.0.115. If we publish the flash
movie on web with 24fps, the sound just can work several seconds
and then stop, the problem is the same if we use the
TShockWaveFlash control to play the flash movie.
5. On Flash Player ocx V9.0.115. If we publish the flash
movie with 12fps, the sound works well but the quality is really
very poor. It seems that the sound plays shorter with more frames
per second. But the flash file works well with the Flash Player
V9.0.47 and previous versions (Flash9d.ocx).
Can somebody help me to figure it out? Thanks in advance!
Regards,
Sabrina
[email protected]

Hello Darren, I really appreciate your response. My mail is
[email protected] I have uploaded the flash file to our
ftp,
http://www.sameshow.com/democreator/create
a new site.swf. And also I compressed the original file to a
zip file and uploaded to our ftp at
http://download.sameshow.com/aff/create.zip,
please kindly check! When we playing this flash file on FlashPlayer
V9.0.47 and previous, the audio works well. But the audio just can
play several seconds and then stop when I playing it on FlashPlayer
V9.0.115. The garbled audio makes us very upset. Your help would be
great appreciated!
Sabrina Fu

When using Flash plugin in Fullscreen the video starts pausing occasionally for a second. OK when not in Fullscreen and works fine in Fullscreen with other Browsers.

I have recently upgraded to 10.0 and whenn using Flash Player in Fullscreen it behaves badly. Starts pausing frequently for aroun a second. It's annoying. When I escape fullscreen and run it within the Browser panel it's fine.. Other Browsers work fine in Full Screen Mode. Tried it with IE and Google Chrome. Firefox is my default Browser so my preferred option.

goneja2 wrote:
I have narrowed it down to my Motherboard, GPU, CPU or Power Supply that is emitting the noise.
I have never heard of such a thing, but the first thing I would try is to disabled Hardware Acceleration (Flash Player Settings).

Safari may unexpectedly quit when using flash type games that require farmville

Safari may unexpectedly quit when using flash type games that require farmville

Safari may unexpectedly quit when using flash type games that require farmville

Iphone camera issue when using flash

Similar Messages

Maybe you are looking for