Iphone can't connect to wifi

Hi, i'm using an iPhone4 (4.3.1) and it was everything fine till yesterday.
This morning I woke up and i saw that the iPhone was working only in 3G so I tried to connect to the wifi network (I've got an airport extreme) manually but it said "unable to connect to wifi network XXX" altough I can see the networks in the wifi menu pannel.
So I turn off the iPhone in order to restart it, or smth else, but it was all the same... Then I have removed the wpa/wpa2 password from the network but the problem already exist.
I tried to create a new wifi network from my macbook pro, but the iPhone can't connect to it... I hope that it's not an hardware problem, and it'll be strange since i can see the networks around me but i can't connect to them: i think that if it would be an hardware problem, i couldn't see them.
Could you help me, please?!? I don't know what could I do now... The last chance is to contact the applecare..............
Thank you
Gian

Two things.
1. unplug power to router. Unplug power to modem. Let sit for 10 seconds. Plug in power to modem. Wait for modem to finish it's boot process and wait for all the lights to stop flashing. Plug in power to router and wait for it to connect. Shutdown iPhone and turn back on and try to reconnect to the internet.
2. On the iPhone go to "Settings > General > Reset > Reset Network Settings" and then restart the phone and then try connecting to the Wi-Fi hotspot again.

Similar Messages

  • IPhone can't connect to wifi at home

    periodically my wife's and my iphone can't connect to wifi at our house.  We do have many devices connected - about 7-9 - but it seems like the iphone is at the bottom of the pecking order. No other devices have this problem.   Sometimes when I unplug and replug the router it will connect to the phones.  Do I have a bad router?  

    From personal experience, I have learned that all Apple devices are good for detecting netowrking/wifi issues. My home wifi works great most of the time. When I start having problems with my iPhones, it will progress to the iPads, then the MacBooks, then eventually to the ThinkPads. If I resstart my router when I start having problems with my iPhones, everything else is always happy. I have even gotten tot hte point that I restart my router once a month (usually at 8:00pm on the 1st) and then I don't have any problems with any of my devices cconnecting, even the iPhones.

  • IPhone can not connect to wifi

    Since I downloaded IOS 7 to my iphone 4S, my battery life is greatly diminished and I can not connect to wifi. I reset my systems, but still the wifi button is grayed out. Suggestions ?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • IPhone can't connect to wifi - one solution

    I have an original iPhone that has been having trouble finding and connecting to my home wifi network. Sometimes it saw the network, other times it didn't. Sometimes it required re-entering my network name & password, sometimes it didn't. I tried all of the usual resets & restores (both of the phone and of the wifi network) with no improvement. My wife's original iPhone finds and connects to the network just fine, so it seems to be something within my phone in particular.
    After surfing the discussion groups and finding nothing that solved this issue, I stumbled on this seemingly easy fix. It works great for me - though as usual with stuff like this - your mileage may vary. It does no harm, so if your phone has issues it's worth a try...
    This workaround presumes that you can connect to your network "sometimes". When you do manage a connection - here's what you're going to want to do:
    Go into your Settings>Wifi and click on the blue arrow next to your network name. The page with the IP address should be visible, and the DCHP tab highlighted. If you've managed to connect to your network, the lines under this tab should be full of information - IP Address, Subnet Mask, etc...
    Copy all of this info down.
    Go to the Static tab and copy all of the info into the appropriate fields. Leave the Static tab highlighted and exit back to your homescreen.
    That's it.
    For me, immediately prior to discovering this workaround I rarely could get it to find my network, let alone connect, and when it did connect it'd drop frequently. Now my phone now finds my home network within 5 seconds of unlocking the phone and stays connected with a strong signal.
    It didn't "fix" whatever caused the initial problem but as a workaround it's a solid solution - at least for my issue.
    If you have poor/intermittent home wifi reception with your iPhone, give this a shot.

    This is great! It's working for me @ home now...which was NEVER connecting before, unless I shook my phone, went back & forth into my settings to get our WiFi network & selected it.
    Did you have issues connecting outside of your home? I used to have the "E" when not on my WiFi, but now cannot access e-mail or internet anywhere outside of my house, unless there is an AT&T WiFi hotspot somewhere...which NEVER happens. I'm VERY frustrated, because I got lost last week & couldn't even access the "Maps" section because it couldn't locate me! Couldn't access the internet to search the address I was looking for, because I was in the car & didn't have an AT&T hotspot. My GPS in the car wasn't working properly...very frustrating...can you offer any solutions?
    Thanks! Tamara

  • I have 3 questions,Audio/Video Remote Control HID driver windows 8 fails to install code 32, trying to use usb tether connection rather then using WiFi to connect Laptop and iPhone. can only connect using wifi. Last quest. about the hotspot bar.

    In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
    biut I am not sure how to properly do this.
    Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not  trainsmit my ssid for others to see even though I do use a password.
    Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

    In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
    biut I am not sure how to properly do this.
    Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not  trainsmit my ssid for others to see even though I do use a password.
    Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

  • IPhone 4s and can't connect to wifi,wifi is grayed out and says "No wifi".FREEZER TRICK WORKS!

    I have iPhone 4s wchick cannot connect on wifi,wifi is grayes out and says"No wifi",i restart my phone,i reboot it and finally i restore it the problem remains,i put it on a freezer for more than 5 minutes and works for 1-2 minutes,but when outside temperature returns on the phone still can't connect on Wifi!what to do?
    Anyone having the same problem?My iPhone 4s its not 6 months old!

    Try restoring your phone usng DFU mode. Here are steps to get DFU Mode: Open iTunes on computer. Connect iPhone to computer. (some turn off iPhone here, I do not) Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iPhone recognizes iPhone in Recovery Mode. Usually takes 10-20 seconds of holding the home button. If the iPhone screen is black (blank) the iPhone is in DFU Mode.

  • Can't connect to wifi in hotels in Ireland with iPhone 5

    Can't connect to wifi in hotels in Ireland with my iPhone 5. My iPad 3 works fine. When I enter the wifi password for the network I always get the error message "Incorrect password for XYZ". No problem with iPad 3.

    Returned home only to find the same situation with my home network. Much time on chat support with Apple. Short story long: Must have been corrupted software. Had to restore original original software then add back apps and music. Couldn't back up before doing the restore so I lost a bunch of pics, but at least the phone is working once again.

  • Help, just had my iphone 3 but can't connect to wifi put in the correct password but won't accept it, any ideas??

    Help, just had my iphone 3 but can't connect to wifi, i get as far as the password put in the correct password but it won't accept it, any ideas?? Thanks

    What type of encryption are you using with your wireless network -WEP or WPA?
    If your wireless router supports both which it should unless it is quite old and you are using WEP, try switching to WPA which is much more secure than WEP which is important if you have a Windows PC or any Windows based device connected to your network.
    In addition, when was the last time you checked Netgear's website to see if there is a firmware update available for your wireless router model that you haven't installed?

  • I can't connect to wifi at home on business hub ? So cannot update my iPhone 5  Help!

    I can't connect to wifi at home on business hub ? So cannot update my iPhone 5  Help!

    wifi is wifi, and business hub means very little.. this is area for time capsule discussion.. but the standard measures apply.
    1. Set wireless name (SSID) to a name that is short, no spaces and pure alphanumeric. Eg your Business Hub call wireless BH. There is no need for names longer than that.
    2. Set wireless channel for 2.4ghz to 11 or 6 or 1. Please test in that order. In Eurozone you can add 13 or use it instead of 11. They are the only 3 non-overlapping channels.
    3. Use no security to test.. of course this is unsafe long term.. so this is to test for a few minutes only.
    The only security that should be used with N wireless is WPA2 TKIP-AES .. it can be named several different things ie in Apple routers it is WPA2 personal. Use a passkey of 10-20 characters.. more if you are paranoid, mix of upper and lower case + numerics.. so pure alphanumeric.
    4. If it fails set the mode to G wireless. It is more consistent standard.
    If it still fails buy an Apple router and use that as WAP.

  • After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

    After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
    switching off wifi and on again or going into airplane mode did't help!
    This problem happens only with ad-hoc wifi networks not with normal ones.
    (Ad-Hoc network was created on XP Computer)

    Welcome to Apple Discussions
    Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
    You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
    In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

  • IPhone 6 can't connect to WIFI anymore

    Ok, since my iPhone 5 has been updated to 6.1, it can't connect to WIFI networks anymore and from time to time restarts for no reason.
    I tried to restore from iTunes, and now I wan't to back it up from iCloud, which can't happen without WIFI.
    Can anyone help me with this issue?
    Thanks in advance!

    I have the exact same problem. There are countless other threads on this and I have tried all the tricks in the book to get it to work again. With no success. I cannot connect to any wifi router (home, work, public...). I also restored the phone various times and now can't backup from iCloud because of missing Wifi. This is extremely frustrating. I really hope Apple puts out an iOS update very soon as this issue as all but new.

  • Iphone 4s can not connect to wifi

    I have an iphone 4s can not connected to wifi even it was working the day before problem.

    Power off your phone, unplug the router and modem for 2-3 minutes, then plug them back in, power your phone on, and try to reconnect.

  • I can not connect to wifi using iphone 4s

    I can not connect to wifi using iphone 4s

    If this is you home wifi try resetting the router.  Turn if off at the wall wait a minute and turn it back on.  Are you sure you have the right password?

  • Still can't connect to WiFi since iO6 upgrade on my iphone 4s

    Still can't connect to WiFi since yesterday's iO6 upgrade on my iPhone 4s.  Plus battery life is horrible!!

    If you are having the issue where it takes you to a login page, goto Settings > WiFi and tap on the blue button to the right of your network name. There'll probably be an option to auto-join and you'll want to toggle that. If it's off, turn it on then back off. If it's on, toggle it off. If prompted to login again, just hit Cancel in the upper-right. Now goto Safari app and you should be prompted to connect to your network at which time it should work. It did for me at least and a friend of mine.

  • I can't connect to wifi network and bluetooth on iPhone 4S.  Need help.  Have already rebooted everything and reset network setting

    I can't connect to wifi network and bluetooth on iPhone 4S.  Need help.  Have already rebooted everything and reset network setting

    I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
    I think there's quite a few iphone 4s users with the same problem!
    I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
    I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
    An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
    If anyone else has any ideas these would be appreciated?

Maybe you are looking for

  • Problem with Nokia 1208

    Hi I've had my Nokia 1208 for about a year, but an icon has appeared on the screen, out of the blue, which i dont recognise. It is a bent arrow pointing upwards. SInce this has appeared no-one is receiving my texts. I can receive them & it looks like

  • Screen Dump to printer

    For a 1280x1024 screen, I build (it takes up to 5 minutes each to build) a 1272x876 one-bit-per-pixel set of graphs on each BufferedImage and would like to print selected BufferedImages to my laser printer (which I believe prints at 600 dots per inch

  • TabNavigator gets confused?

    Using SDK 3.4.1 I'm running into an issue where I have x number of tabs and lose the ability to switch between tabs without selecting the same tab twice.  For example, if I have 6 tabs: (tab1)..tab2..tab3..tab4..tab5..tab6 (tab1) is my currently acti

  • Optimization for conversion

    Hi, I have the following VI It runs fast enough on a fast PC (duo core 2) but it doesn't run fast enough on my laptop. Is there a way to optimize this? Best regards, Thijs Solved! Go to Solution.

  • The Best one will get 5 point

    Hi, It s a simple Question: I wanna do a Master-Thesis about MPLS (TE-Voice over MPLS) using OPNET as a Network simulation-Tool. But i need some Idea/Suggestion about the Topic. Thank you all.