Iphone can't play movie in mobileme gallery

I logged onto to my 3G or GPRS and tried playing my uploaded movie in my mobileme gallery but it states "this movie can not be played". However, when I converted to Wifi at home, it was able to access and play the video.
Can anyone explain why this is the case? Is it some configuration necessary to make it accessible via 3G or GPRS?

Bring the movie in question into iTunes first. Select the movie and from the Advanced menu select "create iPod or iPhone version". iTunes will create the proper format movie for the iPhone. Upload that one to the Gallery and you are done. The file then works from Windows, Macs and the iPhone.
Howard

Similar Messages

  • AppleTV can't play movies from MobileMe, wrong format ?

    The first time I accessed MobileMe Gallery on ATV it all worked fine, for photos and a medium sized movie. I decided to change the movie size to large, I took the medium off the gallery and shared the large movie from iMovie. I tried to view the movie on ATV, but got a message that it could not show the movie because it's the wrong format. So I changed it back to medium, but still got the no show message. How did the movie format change, I used iMovie every time.

    Your video needs to conform to the sizes/frame/bit rates described here:
    http://www.apple.com/appletv/specs.html

  • Can't play movie from gallery on mac

    I can not play movies from my gallery on my macbook. These movies are imported from Canon A630 to iPhoto. In iPhoto I can play them well. All of them are published to my mobileme gallery using iPhoto. Then I open this gallery in Safari on my macbook to check if everything was published. And when I try to play a movie QuickTime tells me that it needs some additional software and directs me to http://www.apple.com/quicktime/resources/components.htmlos=OSX&ctype=696d6463&cs ubtype=4d4a5047
    I visited this page earlier and installed divx, xvid, recode raw and ensharpen codecs. Also I have Perian and Flip4mac installed codecs. So my main question is: why can't I play movies from gallery using safari if in the same time I can view them well from iPhoto?
    Playing of movies published with iMovie works well. But this does not matter to me since I want videos to be published in events with photos. If iPhoto has functionality to publish videos so it must work! Also I must mention that videos published with iPhoto can be played without problems from my PC with safari+quick time for windows. But under my Mac none of Safari, Firefox and Camino can view videos from my gallery. So I think problem is in QuickTime.

    Anybody?????? Im using web premium CS5.5 it seems ludicrous that by default it lets every website play content on my computer but regards my own content as a security risk and wont let me rectify the problem!

  • When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

    When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

    Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
    You may have some problems because Apple has not certified that everything works with Windows 8 yet.

  • Movies at MobileMe Gallery No Longer Viewable

    After installing Lion on my iMac my movies at MobileMe Gallery won't play. I get a message reading "failure to find plug-in." Anyone else have this experience and/or have any idea what to do. It works fine on my non-Lion Macs.

    Sorry I took so long to acknowledge your post, only had my iPhone with me
    Gagsy, I'm wondering if we could just simply download the latest version of Safari (5.1, I think) and the installation will correct the plug-in problem. I'm a bit timid about it, since I've never isolated one of the programs that comes with the OS and downloaded it alone. Maybe someone else here could give some advice. I've tried moving the Quicktime Plug-In from the Root Directory to my Home Directory (in the Library folder in both cases) but it didn't work for me.
    If anyone else could help us out here, it would be much appreciated. Basically, what can be anticipated by downloading Safari and doing an installation of Safari alone - even though Safari is already loaded.
    Thanks in advance.

  • AppleTV not showing Movies in MobileMe Gallery

    I created a movie in the latest iMovie and used its "share" to send the movie to MobileMe.  I see the Movie in my Gallery (online/web) and I can see/play it in the Gallery app on my iPad.  But the Movie does not show up on my ATV (2nd gen.).
    I saw earlier discussions on this question that suggested that logging in without the @me.com (or mac.com) suffix on the ATV device was the fix.  Well, I'm logged in without any suffix -- always have been, but logged out and back in just to confirm. 
    Also, when I play the movie on my iPad in the Gallery app I am offered the option to use AirPlay to stream to the ATV, for viewing on my TV.  This option works with other videos (e.g., ones from the Elgato app), but when I click on the AirPlay choice while the Gallery app is playing the movie, it does not appear on my TV/ATV.
    Any ideas?  The generation of the movie out of iMovie did not give any errors.

    Update...I can now see the videos if they are published through iMovie instead of through iPhoto...Don't really understand why that works, but at least it's something...

  • Latest version of itunes does not support Quicktime can not play movie from library

    Latest version of Itunes does not support Quicktime.  I can not play movies out of my itunes.  Please fix

    I don't usually download video from the iTunes store. I had a couple of long plane rides coming up and thought I might have time to watch the Stanford IOS7 programming class. On the plane I discovered this issue which has gone unaddressed since 2011 and has been worsened in Mavericks. in 2011 the advice was to open iTunes' get info pane and click run in 32 bit. That worked at least for some people. In Mavericks, iTunes will not launch in 32 bit.
    For the files you can locate in the finder ( mine are at
    /Users/raine001/Music/iTunes/iTunes\ Media/iTunes\ U/Developing\ iOS\ 7\ Apps\ for\ iPhone\ and\ iPad/1.\ Class\ Logistics\,\ Overview\ of\ iOS\,\ MVC\,\ Objective-C.mp4
    ) you can click on the file in the finder and it will launch in QuickTime. For some reason on the plane I could see the first lecture in the iTunes view but, although I could see all the other lectures in the finder, I could not see the first one.
    Ah well, maybe some other year I'll think about getting up to speed on ios7. Heck, maybe by then they will design a decent user experience.

  • Randomly Apple TV can't play Movies/Tv shows and music.

    I've seen other people having problems with this issue but with all my searching, have not found an answer and thought I'd share my experience in case someone has a solution or suggestion.
    Our cable modem service comes into an access pannel in the bedroom closet. It goes to the Linksys WRT54G router, then to a hub which sends out to all the rooms in our house. Our house is new and pre-wired for ethernet in each room. It comes in the office, goes into another hub and then to the Mac Mini I have and to a NAS Lacie storage drive where all my movies, music and photos are at. We stream everything and only synk photos on the Apple TV.
    Over the last couple of days, the Apple TV can't play movies or music for some reason. The errors I get with Movies/TV is "The selected video cannot be played." The format was not recognized. With music the message is "Apple TV cannot play the current song." I know all the movies and music work because a day before I just played I AM LEGEND and it worked perfectly.
    I've got a couple of theories and wanted to float them by everyone. I use a Harmony 880 remote and when I select Apple TV, it turns on the ATV and then sets the inputs on the other items. When I'm done and select watch TV, it turns ATV off. Should the ATV stay on all the time? Could this be causing the problem?
    I've restarted the ATV, the Mac Mini, the hubs, the cable modem, the router. Nothing brings it back. But if it sits for a while, a couple hours or so, then it's back. However, it just stops playing for no reason and the next day it might not work again.
    I'm running iTunes 7.6.2 and I checked the ATV and iTunes and both say they are up to date on their software.
    I could really use some help here. The frustrating part is the kids want to watch one of their movies for the 700th time and it won't play many time.
    Thanks everyone.
    John
    I use a Harmony 880 (I believe) remote.

    Oops----thinking of the light on the Airport!!! =-)
    The status light is gray, so it is not setting off any "alarms", everything else is working, but when I go to watch a movie, rented or owned, it times out and resets itself. I ran a diagnostic and it said everything was working properly, I reset to factory settings and still had the same problem, and even reset the Airport to make sure it was not just the connection.
    At a complete loss as to any other ideas to try to get her up and running again. No way am I going anywhere near an Apple Store with all the iPad hype that is out right now!!!!!!

  • Can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!

    can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!. SHould i by a registration code for QT 7 Pro? I can't play mov files at all.. they were okay in my final cut time line. Now i can't see them!!! I can't import movies from my camera!!!
    Help from Brazil!!!
    Tks

    David,
    tks for your help !!!
    Hi people, first, tks for Birdman308 for his link
    https://www.hightail.com/dl?phi_action=app/orchestrateDownload&rurl=https%3A%2F% 2Fwww.hightail.com%2Ftransfer.php%3Faction%3Dbatch_download%26batch_id%3DOGhkZ28 xeWFiV3dYRHRVag
    and makbookpro as well for his link
    http://blog.lib.umn.edu/mcfa0086/discretecosine/164630.html
    Now i can back to work!!!

  • How can I play mov file on ipad2?

    How can I play mov file on ipd2? Anyone? Thanks.

    I imported (using Photos app) a .mov file from my Nikon camera. Tap the icon and it played.
     Cheers, Tom

  • Can i play movies and music on pc

    can i play movies and music on pc

    This is an Apple support site - not one for Windows based computers.
    Barry

  • Can you play movies from my iPad on a tv

    Can you play movies from my iPad on a tv

    Yes ... with the right hardware.
    This article describes AirPlay Mirroring, which will do what you want.
    http://support.apple.com/kb/HT5209
    There may also be cable solutions.  Check the Apple Store.

  • I updated my computer and now I can't play mov files from anywhere

    I updated my computer and now I can't play mov files from anywhere - won't play in FCP 7, Quicktime. Not sure what updates they were specifically since i hit the "update All" button without going over each one. Please help!! operating on 10.6.8 with FCP7

    Just take a look at the last few days posts here and you'll see many people with the same problem and some possible solutions.
    But you should never do any software updates unless you have a bootable backup of your startup drive.  FCP7 is no longer being supported by apple and updating anything is fraught with dangers. 

  • Can't play .mov files in Xine

    Hi
    I am pretty new to Arch but it is great so far.  I am running vanilla KDE4 with Xine as the Phonon backend.  One problem I'm having is that I can't play .mov files.  Other stuff like .wmv and .avi play ok.  I also have the codecs package installed.
    For example, no luck with this file
    http://media.crossfit.com/cf-video/Cros … llUps1.mov
    Thanks!

    Welcome to the forums DeKay.
    This isn't going to help, but I can confirm this using Xine 1.2 (dev) and almost a pure FFmpeg backend. ffplay and Mplayer can both play this file properly, so it's without a doubt a Xine problem. I ran a gdb trace on it and didn't really get anything to report upstream either.
    Last edited by skottish (2008-11-15 23:11:08)

  • IOS7 (iPad or iPhone) can't play music over airport

    iOS7 (iPad or iPhone) can't play music over airport?  I don't see the little arro that let's me pick the airport for music to the audio system.

    New way of doing this is to sweep your finger up from the bottom of the iPhone screen; you see a sort of control panel with things like airplane mode, bluetooth etc across the top. And 3/4 of the way down the little arrow thing you used to see beside in "music" to choose the AirPlay or Base Station.
    Not exactly intuitive.

Maybe you are looking for

  • Illustrator CC, 2014, default art board name

    In Illustrator CC, 2014, How do you remove a custom art board name, and reset the default to start back at one? It used to be you would just remove the name, but that no longer works. When I create a new art board in a document that has been used as

  • Binary characters in server.log

    Hi Everybody, I am working on a j2ee app on linux box. I am seeing binary characters at the beginning of server.log Binary characters are like @ and ~. If I do page down, it's fine. All the information is getting printed. Does anybody has idea why it

  • Inclusion of the characteristic 0FISCPER in the data basis

    Dear experts, Is it possible to include the characteristic 0FISCPER in the data basis? Thanks.

  • BO Mobile server steps

    Hi all, I have a BO system on SAP BI BO 4 SP6 running on Solaris 10 with Tomcat default webserver & Oracle 11g for the CMS and Auditing Databases. I have a requirement to install the BO Mobile server now. I want to know how to proceed and what do I n

  • How to find out the query hits an aggregate or not

    Hi Experts, Can anyone please tell me how to find out whether a Query is hitting the aggregates or not. Thank you KR