'iphone cannot be activated as there is no SIM in the phone
Hi All
Itunes upgraded my phone to the IOS5.1 yesterday in the middle of it, it said that there was an rror and that i had to restore the phone
which i did via itunes..it restored no prob to a screen with select language/select region etc then plug it into itunes to activate it and get error below
'iphone cannot be activated as there is no SIM in the phone' well there is as i was using it and txting 10 mins before this happened.
I have been reading up on ths and it seems like a known issue however i must stress that this phone has had no jailbreaking done to it..i dont know what that is or even how to do it...so im left with a phone that wont activate as it says there is no SIM in it..its very frustrating..i hope some of you guys light be able to help me out.
it is a 3gs iphone and it is with 3 network in ireland.
ive upgraded itunes to latest..ive restarted comp and unplugged all other usb devices etc..same result each time!
Can it be saved or is it done for?!! im 2 months out of 12 month Apple warranty too just to make things even better!!
Hopefully you can assist me!!
thanks in advance
Aidan
Not sure what this has to do with Apple TV.
Also this is a user forum, no one here can help with that. I would contact your carrier.
Similar Messages
-
I've updated my Iphone but cannot activate it? When I try through wifi it says the activation server is unavailable try later and I've been doing this for 5 hrs now. When I try to activate it through Itunes it says there's no SIM in the phone when there is. The phone worked perfectly before the updating of the software? Can anyone help?
Hi johnquinn1950,
If you are having activation issues with your iPhone after an update, you may find the following article helpful:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Regards,
- Brenden -
I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls
I did call apple care and they guided me through everything.. they said it was the hardware
I was given this phone last year as a present
i know, it was not new.. so it could have been on an other cell provider i am not sure if it was so at the moment that is all i can do -
i updated my i pad with ease then updated my i phone and now apple does not recognise the i phone and then says there is no sim in the phone when there is one installed, can anyone help
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
Sir, Yesterday night i was syncronized my iphone 3gs with my pc. after that operation my phone will not be activated showing error as cound not be activated because sim was not installed. but already I was inserted my sim in it. The phone is connected to my Pc and with my WiFi also. Plz help me to activate it
Not sure what this has to do with Apple TV.
Also this is a user forum, no one here can help with that. I would contact your carrier. -
It keeps saying my iphone cannot be activated because there is no sim, which there is??
I followed the thread and used the link provided to download iTunes version 10.6.3 (again). The same error message keeps coming up, telling me that I do not have it installed. I tried restarting the computer following the install, but it still won´t acknowledge that 10.6.3 is installed. Any other solutions?
-
when am trying to restore my iphone it says iphone cannot be activated because activation server cannot be reached what i need to do now?
The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
There is a chance activation servers might be down/slow for now. Just keep trying throughout the day. Some other forum users are experieincing similar things.
You can also try the apple document for activation issues, but I'd assume its server issues. http://support.apple.com/kb/ts3424 -
I lost my contacts and calendar, and photos since the iOS update and and it states that my iPhone cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 1 MB required). Also it shows that I am over capacity on my Capacity ruler but how do I unload some of that stuff so that I can increase my capacity and perhaps get this synching to work again.
So frustrating!!On your iPhone go to settings>general>about and next to "Available" if you dont have much space then you will need to delete stuff on the phone to make room to take photos by deleting stuff on the phone.
In terms of syncing change what you are syncing and decide what you would really want and not want on your phone which would make what is syncing to the phone smaller. -
Hi Guys, my iphone 3gs is stuck on activation. '' your iphone could ot be activated because the activation server is temporaly unava.'' and itune will show me ''there is no sim in your phone...'' what do i do, I an here in Dublin Ireland.
See your Other post on this Topic...
https://discussions.apple.com/message/20677737#20677737 -
i m using iphone 3gs & i m updating the OS from 4.1 to 6.1 ,,it is showing the message that ur iphone cannot be activated because the activation server is not temporarily unavailable
Contact your Carrier...
Also see this discussion.
https://discussions.apple.com/message/21189708 -
iPhone” cannot be synced because there is not enough free space to hold all of the items in the iTunes library
What do you do about it? Be more selective about what you're syncing to it. Don't try to sync your entire library, just what you actually want to take with you. If you want to take more with you than what you have room for, buy a phone with more storage capacity.
Alternately, you can have music automatically transcoded to a lower bitrate. Not in front of iTunes, so don't recall the exact wording. It takes much longer to sync the first time, but should consume much less space and you shouldn't take the time hit after the first full sync. -
HT4623 iphone cannot be activated
after updating iOS 6.0 my iphone cannot be activated through itunes. anyone any idea?
Just have to give it some time. The activation and verification servers are all slammed right now 'cause of all the people trying to update at the same time. Give it a couple hours (or overnight if you can wait) and it should sort itself out.
= L.I. -
Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.siri will only use apple maps, this cannot be changed. you could try google voice in the google app.
-
I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.
Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
If your iPhone was hacked/jailbroken the update restore the lock. -
The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?
If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
Then see this tip: https://discussions.apple.com/docs/DOC-3141
Maybe you are looking for
-
"BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2
I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there i
-
Custom Support Agreement updates/patches with SCUP
I'm attempting to use SCUP to deploy Windows XP Service Pack 2 patches / updates that the company I support receives for paying for a CSA (Custom Support Agreement). Don't ask, I can't share the patches. Sorry. Importing the CAB generates and "incom
-
hi i am an abaper.. i am developing a report on customer balances... i cross checked by report with t.codes fd10n and fbl5n.. (for sp.g/l transactions) my report matches fbl5n , but in fd10n for a particular customer it is displaying entries of 2006
-
NullPointerException when deeplinking with extended VO
Hey guys. Im having a problem with deeplinking. I have deeplinking working fine in JHS but when I extend the VO of the detail group that is being deep linked to I get a nullpointer exception. The extended VO doesnt have any extra functionality at thi
-
Problem audit mismatch WCS/WLC for local net user
HI, I have a problem in my WCS the audit status is mismatch for my two controllers. When I see the details of the mismatch, it is said that all my 400 users are "not present in controller". However, I checked directly on my web interface of my contro