Iphone cant recognize router, HELP!!!

I have a Wireless G Broadband router, the model number is wrt54g2. I also have iPhone 3G. I never had problems with my iPhone and I was always able to connect to wifi until today. For some reason my iphone wont recognize my router, it tells me “CANT CONNECT”. Please help! I’m certain that the configuration on my iPhone is correct, it works on other routers as long as I know the passwords.
However, the wifi can connect to my laptop. Does anyone have a clue as to what I should do to fix this problem?
Message Edited by mike_ny on 11-25-2009 06:24 PM

If you don't know the Encryption key, then you can login to the Router setup page of your Router and Find out the Security Key.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on the Wireless tab
Click on the Sub tab under Wireless > Wireless Security...
In these window you will find your security key and Security Mode. Using that security mode you can try to connect to your Wireless Network on your IPhone. 

Similar Messages

  • I get an error from iTunes saying it cant recognize the "iPhone"

    I just upgraded to itunes 7.6.0.29, after that got a pop up with a message from iTunes saying it cant recognize the "iPhone" and to detach it and try again.
    Just for verification uninstalled 7.6 and reinstalled 7.5. The problem went away. Then upgraded the iPod Touch software to version 1.1.3
    Thinking that with the new SW version in the iPod maybe the problem went away upgraded again iTunes to 7.6 just to get the same error again.
    Any way to "fix" this? or should I re-install 7.5 and wait for 7.7?
    Any help will be appreciated.

    Hi there,
    follow the following steps below and it shud sort ur problem.
    "THE FIRST AND FOREMOST BLUNDER THAT WE HAVE DONE IS OUR ITUNES VERSION SHOULD BE 7.6 IN ORDER TO UPDATE THE IPOD SOFTWARE/FIRMWARE TO 1.1.3 FROM WHAT EVER OLDER VERSION WE HAVE."
    *MAKE SURE THE ACTUAL EXISTING VERSION OF THE ITUNES ON YOUR
    COMPUTER/LAPTOP
    STEP 1:Friends what I have done is I disconnected my IPOD from my laptop and
    firstly downloaded the ACTUAL (EXISTING OLDER) ITUNES version (7.5) that I
    initially had while i was DOING THE BLUNDER OF UPDATING THE FIRMWARE TO
    1.1.3.
    YOU CAN DOWNLOAD THE OLDER VERSIONS FROM THIS SITE:
    http://www.filehippo.com/download_itunes/?3694
    STEP 2: Once the ITUNES (older version) dump is available on your computer
    uninstall the ITUNES and all the IPOD related stuff from your computer
    from Start>Control panel>ADD/Remove programs.
    Step 3: Restart ur computer and reinstall that older version ITUNES software
    again.
    Open the ITUNES software.
    Step 4: Now connect your IPOD and the ITUNES will prompt you that an IPOD in
    recovery mode is detected. It will ask you if u want to recover it to the
    factory settings by clicking on "restore" under the "summary" tab on
    ITUNES. Before doing this the very important step we need to do is to
    UPDATE THE ITUNES VERSION FROM THE EXISTING OLDER VERSION TO 7.6 WHICH IS
    VERY IMPORTANT.
    STEP 5: To do this click on the HELP menu on the top and click on CHECK FOR
    UPDATES. Thats it the ITUNES will be updated to latest version which will
    allow us to update the IPOD'S FIRMWARE to 1.1.3 as well.
    STEP 6: Now go to the summary tab of the IPOD and click on restore> wait for the
    restoration process to carry on and the IPOD should be running back to
    normal.
    WELL FRIENDS THIS WHAT I HAVE DONE ON MY IPOD AND THE PROBLEM IS SORTED.
    I HOPE THIS SHOULD SORT YOUR PROBLEMS AS WELL.

  • TS1410 I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated

    I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
    Thanks

    Thank you so much. Guess i just have to upgrade now.

  • HT1386 itunes isnt showing my iphone and so i cant sync anything help???

    itunes isnt showing my iphone and so i cant sync anything help???

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!!!

    hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!
    does anybody know how to solve this problem? thx!

    If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0

  • My iphone 6 has been missing for about 2 days now and I cant track it becasue evrytime I try to it says that my iphone is offline please help me

    I cant track it becasue everytime I try to it says that my iphone is offline please help me

    Help with what?  As you've discovered, a phone cannot be tracked if it's offline.
    Put it into Lost Mode and hope for the best.

  • The nsu cant recognize my n95, i need help

    hi the nsu cant recognize my phone although i reisntall it and the nokia pc suite again and again, and followed the help instructions.
    i need another version of the nsu- older version to try to use it and it may help with the problem.
    does someone has an older version of nsu or can tell me where can i find it?
    thank you in advance
    yuval

    Hi subress
    Unfortunately if you're looking to update N95 to v21.0.016 you have to use latest version v1.4.23en of NSU. As previous poster mentioned any empty or corrupted registry keys from previous installations can prevent NSU from installing correctly.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Im running version 5.0.1 on a iphone 4 and so is my wife we used to be able to sync and share a reminders but now we cant, any one help please

    im running version 5.0.1 on iphone 4 and so is my wife we used to be able to sync reminders but now we cant can anyone help please

    In your Icloud settings there are options on what is shared and what is not they might have got switched you can check those first.

  • Hi...icant restore my iphone 3G,ihave use redsnow,ireb,rec fix etc still cant  restore pls help me...

    hi...icant restore my iphone 3G,ihave use redsnow,ireb,rec fix etc still cant  restore pls help me...

    You CANNOT get help here as you've jailbroken your phone.
    Go elsewhere for assistance.

  • My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, even after seeing the low battery image, i tried to charge the iphone. Then I tried to connect to itunes. But itunes cant recognize the device. What should I do?

    My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • My iphone is not working HELP !!

    My iphone is not working HELP !!!!!!!!!!!?
    my iPhone is black and it's so hot !! and i cant open it am trying with the Home and lock button and still not working and it's very hot and it's out of the charger right now ... and still hot i tried everything not working ? ?can someone tell me what to do please
    now it's not cold at all !! it was so hot !! i plugged back to the charger and it's not working ! and i tried the BUTTON HOME and LOCK not working ?? ?any ideas ??

    Let it cool of for a while , While not charging it,  then try after while plugging it into the computer you normally use itunes with and see if itunes will recognize the phone.

  • Iphone cant find hp 210a airprint

    iphone cant find any printer airprint., have a hp aio wifi b210a, it is on the same network and i have no problems printing from my imac on wifi,??????
    what to do.???

    Hi Andrew.
    Thank u for u´r help.
    i can say yes to 1-4, and i´ve decided to by af timecapsule, then i think my problems will be solved.?? :-)
    Can u help me with this:
    I want to upgrade my osx, but i don´t know if i can upgrade to LION from my OSX.
    i´ve got 10.5.8 - Imac, 2,4GHz Intel Core 2 Duo - 2 GB 667 MHz DDR2 SDRAM..
    If i cant´t upgrade to LION, then what do i do first.??
    Hope to hear from u soon.

  • Wi-fi bridge between two routers TP-LINK WR841ND (WDS).  HP 1536 dnf MFP connect to one of this routers (copper).  My Ipad or Iphone can't find HP 1536 dnf MFP (using Eprint). Ipad and iphone connect   to router across WiFi.

    Hello.
    I have wi-fi bridge between two routers TP-LINK WR841ND.
    The name of this technology - WDS.
    HP Laser JET 1536 dnf MFP connect to one of this routers (copper).
    Second device (my NETBOOK) connect to second router (WiFi).
    I have good communication between NETBOOK and HP Laser JET 1536 dnf MFP via WiFI-bridge.
    In usual case NETBOOK can find (and can Ping) network printer and make a print some files.
    But my Ipad or Iphone can't find HP Laser JET 1536 dnf MFP (using Eprint). Ipad and iphone connect
    to router across WiFi.
    Please, help!

    Are you using the ePrint Mobile App, the ePrint Printer Control App, or just trying to send an email to the printer's ePrint email address?
    Does AirPrint work?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • My iphone cant restore or update and currently in recovery mood. The story is when i update my iphone from ios 7.0.3 to latest update via itunes and it said my download was corrupt. Then, my iphone being in recovery mood and cant be update.How to..??

    I had tried and restore again and again via itunes and it said the same answers. My donwload was corrupt. I try with manual restore (shift + restore) in itunes and it failed already and the popup window said "my iphone cant restore iphone. Unknown error (14)." For now, my iphone still in recovery mood and the logo connect to i tunes appear when i switch on. I tried use another usb, another computer and another port to restore this but all method was failed. What the problem? Help me.

    Hi there besiburuk,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    -Griff W. 

  • My ipod touch 2g cant open and itunes cant recognize it too

    my ipod touch suddenly blackout after un plugging it to my pc after that it heated up i mean literally it heated up then i try plugging it again but it wont open and the itunes cant recognize it please help me

    Try the remaiing suggestions of the following. If not successful then it is time for an appointment at the Genius Bar of an Apple store.

Maybe you are looking for

  • Screen sharing and ARD windows to other computers are invisible!

    Hi I have been using screen sharing and or ARD with no problem, for some odd reason today when i went to control a iMac in my network, the window opens but is not there, like i hit command W and i noticed it closed windows on the iMac i can not see t

  • Downloading Records in Btaches

    Hi Guys,              Can anyody tell how to download the data fronm SAP database in  Batches ?I mean like downloading 1st 300,000 rows then  again next 300,000 rows like that all the data from database.For Example BSEG table. Plzz Give me an Example

  • Adobe Acrobat 9 Announced today!

    lots of fun and serious features! http://www.adobe.com/products/acrobat/ Jon

  • Photos not appearing on iMovie

    Hey there, I'm making a movie/slideshow of pictures for my friend's 18th birthday, been working on it for months and when I go to add some final photos tonight the new ones that I add imovie seems to skip! They appear in the thumbnail line up when I

  • Missing return statement error

    public class Member          public int Member(String memberid, String memberpw)      String cs = "jdbc:oracle:thin:@255.255.255.255:1000:a123stud";          String user = "123456";          String pass = "123456";           String member = "member_i