Iphone charging block died, now what?

my charging block (the little one) for the iphone 4 just suddently stopped working, ive tried a couple of cables and outlets and its simply done. now what im wondering is if i can just go to the apple store and get a replacement? would i have to make an appointment to simply exchange the charger or would a walk in be fine?
thanks

I would suggest making an appointment with the Genius Bar.  If you don't need one it wouldn't hurt.  If an appointment is required, they will usually set you up with an appointment if you just walk in, but you may have to wait a while for the appointment.

Similar Messages

  • While taking photos my iphone's battery died, now my photos app won't open and I can't save any pictures taken or downloaded. Please help.

    While taking photos my iphone's battery died, now my photos app won't open and I can't save any pictures taken or downloaded. Please help.
    Also, I can't import my photos to my Windows 7 PC.

    Try rebooting your iPhone (holding the home button and sleep/wake button together until the apple logo appear)

  • My battery wouldnt charge and died now wont start up!?

    Last night i had 4%  of battery so i plugged my charger in, and it said not charging i just continued dooing whatever on my laptop, then i had to leave sp i brought my laptop, in that time it died. Now it will not start up and there is no green led on my charger. What can i do to fix this and what caused it?!

    Have you tried the troubleshooting steps listed in Intel-Based Apple Portables: Troubleshooting a computer that will not power on? If you do, make sure to fallow the link to the troubleshooting Apple Portables: Troubleshooting MagSafe adapters. Also do you have a 2nd power adapter to test with?
    Good Luck!

  • I tried to reset my husband iPhone and its frozen now what should i do ??

    I tried to reset my husband iPhone i went to settings>general>reset>erase and its frozen right now its not letting me to turn it on what should i do??!!  

    Try recovery mode.
    Instructions >  iOS: Not responding or does not turn on

  • Windows 7 partition has died. now what?

    so ive been running windows 7 in bootcamp with no real issues for a month or so. great.
    today i try to boot into windows and i get an error report screen saying that some new software or hardware may be causing startup to fail (of course, not specifying which software or hardware that might be). it then lists the different startup options i have: safe mode, safe mode with networking, safemode with command propt, as it last worked, or start windows normally. ive tried just about all of the options listed and what happens is, if using a safe mode option, a bunch of file names scroll up the screen making it seem as though windows is about to startup and then it immediately restarts my computer again. repeating the whole process. when i select the "start windows normally" option it does the same thing without the files scrolling up.
    on that note, i have set my startup disc to default boot into windows because i figured it would help solve my issue. hasnt made a difference at all.
    another suggestion on this error screen is to use the windows cd and boot from that, select "repair computeR" and i should be good to go.
    when i boot from the CD and select the "repair computer" option windows is telling me that im running vista, not 7, and that my windows 7 recovery disc wont work...find another one.
    so thats about it. im stuck on this screen and cant figure out how to solve this problem.
    my theory is windows updated a driver or something and has no idea whats going on and wants me to fix it. but without being able to get into windows at all i dont see how i am meant to do that.
    as a last resort i guess my only real solution is to just wipe the partition and start over again...loosing everything i have on it right now. not something i really want to be doing.
    can you guys help me out? im stuck on this one.
    thanks

    You may want SL 10.6.3+ for the drivers.
    The Assistant use to/should/could have created an NTFS for Vista; given minimum recommendations. That is all. Offering NTFS was removed.
    And while MS says 16GB for 32-bit Windows 7 Home Premium, that is small and may not work. Same for x64 and its 20GB (32-40 should be minimum).
    Boot Camp 2.x was clobbered together back in Sept 2007, and Apple jumped the gun on trying to support Windows 7 in Aug 2009 before it was released.
    So, might want to show what OS you are running.

  • IPhone 4s battery died, now won't turn on

    Battery ran out, it's been plugged into the wall for an hour now, was plugged into my computer for an hour and wasn't recognized by iTunes, home+power button did nothing. I didn't drop it, get it wet, or anything else. It's not the outlet, the charger, or the cables. Any ideas?

    Ouch… that's a tough question! Maybe you should charge it... Smart one -_-

  • Installed CS4, Computer died, Now what?

    I just installed CS4 Extended on my computer and this morning the hard drive died.  I need to buy a new computer (6 yrs. old ... I know, I should have retired it way sooner), but now am wondering about being able to put the CS4 software on it, since I already installed it one computer.  Can I install it a second time?

    Now that you know that hard drives die, you need to buy and USE software to make a full backup of your hard drive to DVD or USB hard drive... so you may restore everything to a new drive
    I use http://www.terabyteunlimited.com/image-for-linux.htm which has a reasonable cost, creates a boot CD to run, and copies everything to the backup image for easy restore

  • My computer Died now what

    My desktop died and I want to transfer my Itunes to my labtop. Im more worried about the songs I bought from Itunes then the CDs I have convertedI transfer teh data from my Ipod to wy laptop?

    The transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    iRepo Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

  • If i update my iphone 3g with ituns now what firmware do i "get"?, if i update my iphone 3g with ituns now what firmware do i "get"?, if i update my iphone 3g with ituns now what firmware do i "get"?

    I haven't updated my iPhone 3G for a long time because i had an iPhone 4, which i actually lost, so i wanted to update my 3G device with the latest software but my question is which firmware i will "get" because actually the latest update isn't compatible with 3G devices or am i wrong?

    The latest firmware [4.3.3] will not install, so the "Restore" function will write 4.2.1 and nothing later. The restore is related to the iPhone that is currently attached to iTunes not the missing iPhone4; your backup files for iPhone4 will not be used. It will be as if you are setting up the iPhone 3G from the beginning.

  • My iphone isnt turning on or charging i dont know whats wrong with it, can anyone help me?!?!

    i dont know whats wrong with my iphone it wont turn on or charge i dont now what i did wrong please help

    Charge for 15 minutes with the wall or mains adapter. Then hold the HOME and SLEEP buttons until an Apple logo appears. If something other than an Apple logo appears follow the instructions on the screen. If nothing happens after holding for 30 seconds you have a hardware problem.

  • My iphone have lost, now what should i do

    I'm raymond ck, my iphone 4 have lost.
    now what should i do it?

    raymond ck wrote:
    I'm raymond ck, my iphone 4 have lost.
    now what should i do it?
    If FindMyPhone was not activated, then you will either have to look for it or report it to Police and hope someone is nice enough to hand it in.
    Pete

  • I updated my iphone  to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!1

    i updated my iphone  to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!

    I upgraded my iPhone 4 last evening to iOS 6, the upgrade completed and the device was usable. Then in the morning I went to the device to check E-mail, Voice Messages, Test Messages, etc... and the phone was dead. I tried plugging the device into a charger (for a couple of hours) - still dead. Plugged into computer with iTunes, device not recognized or discovered, and iPhone was still dead... Took the iPhone into an Apple Store and the Technician looked it over for any visible signs of defect/malfunction, then performed various tasks to breathe life into the phone - nothing... His suggestion, at this point, was to replace the phone. He speculated that the iOS upgrade possibly corrupted the iPhone's charging firmware, and that this device was now a BRICK. Keep in mind that the phone and it's charging abilities were perfectly fine prior to the iOS Upgrade. I hate to go through the replacement hassle and the cost ($159.00) when the iOS upgrade caused the problem. Any suggestions? Thanks!

  • So last night before i went to bed my iphone 4 was charging and it was at 6%.the next morning i woke up the phone said it had still been charging but was still at 6%. so i took it off and it died.now it wont come on.it keeps saying the charging sign

    So last night before i went to bed my iphone 4 was charging and it was at 6%.the next morning i woke up the phone said it had still been charging but was still at 6%. so i took it off and it died.now it wont come on.it keeps saying the charging sign. i tried rebooting and the charging sign just shows up. how can i fix it?

    sounds like a hardware issue with the battery
    1. you can try different chargers if you have any
    2. while plugged in, Hold the Home+Power at the same time for about 20 secs, if the apple comes up then release both buttons
    3.if that doesn't work you may have to go into Apple store

  • My iphone 5 completely died 27 hours ago, ive had it on charge for 15 of those 27 hours, what can i do?, my iphone 5 completely died 27 hours ago, ive had it on charge for 15 of those 27 hours, what can i do?

    mouy iphone 5 completely died 27 hors ago, its been charging for 15 of those 27 hours and its not doing anything, ive tried resetting it but it hasnt worked
    could someone help me as to what i can do?

    try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • I pod touch 5th generation was working fine died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue if it on and the apple logo is about to appear but it never does nor does anyother picture. If i hold the

    I pod touch 5th generation was working fine (Not sure what the last ios i downloaded was it should be ios 8 or higher). The battery died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue as if it's powering on and the apple logo is about to appear but it never does nor do any other type of images on the screen. If i hold the home button Siri will say "Siri is not available please connect to internet" but there is still no image on the screen. I've tried holding down the home and power button it restart it but doing this just gave me the same results. How do i fix this problem? What's wrong with my i pod?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • ISE 1.3 and NAC

    I have a customer running 5508 WLCs across the estate, and I'm retrofitting IEEE802.1x authentication for the corporate WLAN, and WebAuth for the Guest WLAN...they have PSK at the moment :( They have AD and are showing great interest in ISE and NAC,

  • New Questions not displaying on a page Survey App Part SharePoint 2013

    I wanted to insert a survey app part on a page in my site so i followed steps mentioned in the below link http://sharepoint.stackexchange.com/questions/86903/showing-only-survey-questions-in-page it successfully created but now when insert another qu

  • How to declare class variable with generic parameters?

    I've got a class that declares a type parameter T. I know how to declare a static method, but this doesn't work for a static variable: public class Test< T >     * Map of String to instances of T.     * error: '(' expected (pointing to =)     * <iden

  • Cannot place Skype calls

    I installed the iPhone app and signed in, no problem. All my contacts show. I am online, reading emails, surfing Safari. I try to make a Skype call, and get this error message: "You must go online to make this call." But I AM online! I try again. Sam

  • ABAP Program to close BPC CUBE Request

    Hi I urgnetly need abap program to close BPC Open request. I tried program RSAPO_SWITCH_TRANS_TO_BATCH and function module : RSAPO_CLOSE_TRANS_REQUEST It never worked on BPC infocube at all. Please help me close yellow request to green ON BPC CUBES.