IPhone charging on Win 2000 PC

I have a spare iPod cable that I want to use to charge my iPhone up at work through the PC I have with Windows 2000 through USB.
When I plug it in I doesnt find the driver for the iPhone obviously and wont go further and isnt supplying power down the USB cable.
I can't install iTunes at work as Im not allowed plus only have Win 2000.
Surely there must be a way to just make it give power, I know you can as works with my Blackberry.
Any help?

adeleander,
Windows 2000 may charge it without the drivers to access the data on the iPhone. However, it requires a high powered (500mA) USB port. Many Windows 2000 machines have USB 1.1 ports which may or may not be high powered.
Hope this helps,
Nathan C.

Similar Messages

9i installation problem on a Win 2000 P4 PC

Hi,
Although I am new to Oracle, with the help of documentation I successfully managed to install it on a Window 2000 PC without any major problems except for the one described below.
The problem is this:
When the PC was part of a campus domain (e.g., claflin.edu) I got "end-of-file on communication channel" and "internal error. hostdef extension doesn't exist" errors repeatedly many times during installation but I didn't get any when the PC was taken off the network and added to a workgroup.
Is there something I need to do to make it work on a network? Has anyone seen this same behavior on Win 2000 or is it something unique in my case?
By the way, I am also running the personal web server (PWS) in the same PC.
Any help will be greatly appreciated.
Thanks
Kuha M.

Hi Eric,
Ther should not be any problem in stalling NWDS SP9. Your case the problem may be
1)Insufficient Disk Space
2)Outdated vesrion of JDK
3) you might not have been downloded full fledged NWDS SP9 installer.
4)May be while installing NWDS it is not able to locate JDK in Directory.
if you check all these, i hope it will work!!!.
Regards,
RK

Related to creating pdf file through form6i in Win 2000

I have created a form which will generate pdf file by calling a report. I am able to generate pdf files in platforms like Win 2000,Win NT,Win 98. But expect in Win 2000, I am able to read the pdf file in acrobat.
The error displayed while opening pdf in acrobat is: There was a error processing this page,There was a problem to read this page (122).
Form6i and Reports6i is installed in Win 2000 and acrobat reader version is 5.0
Please answer my question immediately

Sorry Im totally new to acrobat so this may seem like a daft question> I have scanned a document through a document feed scanner into a pdf format but some of the pages are orientated the wrong way within the pdf, is there a way to change the direction of pages and then save the whole pdf again so that everything is the right way round. I know that you can change the orintation while reading the pdf but as this is being put into web ct for students I would prefer for them not to have to do this.

Get Windows Folder Paths on Win 2000

I downloaded the windows_folder_path.vi from NI site, where I can see that "This VI is supported on Windows 2000, XP, and Vista."
If I use it in an executable that searches for Application Data folder, it works under XP, but it doesn't under a fresh Win 2000 SP4 installation.
A pop-up with the message:
Entry poin Not found
The procedure entry point SaferGetPolicyInformation could not be located in the dynamic link library ADVAPI32.dll
is shown.
When I press the OK button, another popup
LabVIEW: Resource not found.
An error occurred loading VI 'windows_folder_path.vi'.
LabVIEW load error code 3: Could not load front panel.
I'm confused because here (MSDN, Microsoft Developer Network) I can see that the SaferGetPolicyInformationfunction requires WinXP or Vista
Isn't this vi expected working properly under Win 2000?
In the next days I'll do the same test on a Vista machine, and I hope....
How can I get the Application Data path on WinXP, 2000 and Vista? With different languages OS this folder has a different name (Application Data, Dati Applicazioni, ...) so I can't build the path by myself.
I don't know if this helps, but I'm developing with LabVIEW 8.2.1and WinXP Pro
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded
Solved!
Go to Solution.

Use the registry functions of LV to get direct access.
The folders for the current logged in user is under:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders, the value is AppData
The Fodlers for all users is under:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders, the value is Common AppData
Message Edited by waldemar.hersacher on 10-22-2008 10:10 AM
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Why does my 3rd gen ipad only charge with an iPhone charger and not the 10w charger it came with?

Im only asking this because it's annoying me , but my 3rd gem ipad will not charge with its 10w charger ? It will happily charge with my iPhone charger, and my iPhone will happily charge with the 10w charger but why won't the ipad charge with the charger it came with ? Any ideas ?

The cable for your 10W charger may be defective.

Ipod nano possible with win 2000???

my wife just got an ipod nano \(3rr gen) for her bday, and we have a computer with win 2000. now the only itunes we can find for win 2000 is ver. 7.3. when i downloaded this it tells me that i need ver. 7.4 or better. anyone got any info or tips for me... PLEASE

NO. That is NOT what the website says. When you go to the 732 for Windows 2000 d/l page, it clearly states you can use Win2k. The website says "iTunes is the best way to enjoy your digital music and video with your PC, iPod and Apple TV. iTunes 7.3.2 for Windows 2000 is designed to work with Windows 2000 Service Pack 4 or later. To use iTunes with Windows XP or Windows Vista, visit http://www.apple.com/itunes/download/ to download the latest version. Use iTunes to import CDs or download songs and videos from the iTunes Store. Make playlists perfect for any occasion. Burn playlists to CDs and play them on your home stereo. Sync your media with iPod to enjoy it on the go, or play your collection on your TV with Apple TV."
Why have so many missed this??? Apple is clearly stating they support Win2k - including sync to ipod. I so got one. I d/l the iTunes 732 for Win2k and it works fine - to play music (using it right now). But once I connect my new nano, I get the error message "The iPod 'IPOD' cannot be used because it requires iTunes version 7.4 or later. Go to www.blah blah to d/l v7.4..." So.... what now??? I'm stumped. And never-mind the "win2k is old and nobody supports it..." stuff... Microsoft still offers SP4 for d/l.
Why would Apple put a utility in a backward compat. program that is not backward compatible?????
In addition (and this may be over my head), but why does the website show the file @ 47.7MB, put once on my hd it shows 37.9MB?? I've d/l the file twice to be sure but have the same result.
Please forgive me - I am not shooting the messenger, I'm terribly confused. I am clearly missing something. Would someone PLEASE set me straight??? I'm a big boy - I can take it.

Enterprise Manager Console does not start on Win 2000 Pro

I have installed Oracle 9i Release 2 Enterprise Manager on Win 2000 Professional. But the Enterprise Manager console does not start. Also the EM Configuration Assistant does not start.
I have installed many times, but it is never successfull.
I was installing Enterprise Edition -> General Purpose database.
Tried the following from command prompt:
oemapp.bat I get this message : "Usage: oemapp <application_name>"
oemapp consoleI get : "bad command or file name"
oemapp console oem.loginmode=standaloneI get : "bad command or file name"
Is there any post installation configurations that need to be done?
When I read thru the oemapp.bat, "Usage: oemapp <application_name>" was under the jreSetup module.
Under C:\Program Files\Oracle\jre I have the folders with following Names(versions) 1.1.8 and 1.3.1.
In the environment variable also I have C:\Program Files\Oracle\jre\1.1.8\bin and C:\Program Files\Oracle\jre\1.3.1\bin
Could some one help me with this.
Thanks,
Aruna

Marcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim

Understanding iPhone Charging and Power Adapters

I've been in a protracted discussion (now locked) regarding iPhone battery charging and whether it is harmful/helpful to use the iPad power adapter rather than the iPhone power adapter.
There are a lot of misconceptions related to iPhone charging and current ratings on the iPhone and iPad power adapters. As an electrical engineer, I'd like to clear up some misconceptions.
Apple supplies a power adapter, not a "battery charger," with the iPhone and iPad.
The iPhone power adapter supplies a constant 5V at up to 1A (rated–independent tests have shown that it can supply almost 1.8A).
The iPad power adapter supplies a constant 5V at up to 2 or 2.1A (rated).
The iPhone's battery charging voltage and current are regulated within the phone.
The iPhone's battery is rated at 3.7V. Charged with the raw 5V from the power adapter, it would be destroyed. Fortunately, the internal regulation in the iPhone prevents that.
The maximum current that an iPhone will draw from a 5V power adapter is right around 1 amp. It does not matter if the charger is capable of supplying more, that's the most that the iPhone will use.
Because of the internal charge regulation, the iPhone battery will not charge any faster on an iPad power adapter than on an iPhone power adapter.
Apple approves the use of the iPad power adapter with the iPhone. It is completely safe for that purpose and does not harm the phone or battery in any way.
A water analogy might make this much easier for people without electrical engineering background to understand.
Water pressure (psi) is analogous to voltage.
Water flow (gallons per minute) is equivalent to current flow (amps).
A faucet valve is analogous to the iPhones battery charging regulation circuitry.
A bucket's capacity (gallons) is analogous to a battery's capacity (amp-hours or AH).
Let's say you adjust the faucet to flow 1/10 of a gallon per hour. The five gallon bucket will take 50 minutes to fill up. Easy enough. But then...
You need a lot more water flow for a new sprinkler system.
You need a lot more current for your new iPad.
Since the water pressure is constant at 80psi, the only way to get more flow use a bigger supply line.
Since the voltage is constant at 5V, the only way to get more current is to use a higher current power adapter.
After installing the new higher capacity water supply line, you go out to your faucet and adjust it to 1/10 of a gallon per hour.
After plugging in the higher capacity iPad adapter, you plug in your iPhone and its charging regulation circuitry adjusts the current flow to about an amp.
The bucket still takes just as long to fill up.
The battery still takes just as long to charge.
The faucet is not under additional strain since the pressure is still 80psi.
The iPhone's battery charging circuitry is not under additional strain since the supply voltage is still 5V.
I hope that I've clarified this for those who want to better understand the subject.

As far as the battery status, the tiny little icon in
the upper right corner of the screen is somewhat
helpful, but while it is connected it does not
actually indicate the level of the charge or that the
Iphone is charging. I was hoping to find a more
informative screen that would give better battery
details. When you first connect the iPhone sometimes
I get a large battery icon that shows the level
visually Is there a way to navigate to this screen?
1. Press the top button to turn the display off if it's not off already.
2. Connect to a power source.
3. The screen should display a large battery meter in the middle of the screen that actually shows the state of charge, even if charging.
If you don't see this plugged into your Mac try the AC adapter that came with the phone. If you still don't see it take it to an Apple store.
best,
Larry
Lenovo T-60 Windows XP Pro

IWS Install Failed on Win 2000

Hello - we are still trying to recover our install of iWS on Win 2000. The
uninstall.exe hangs. Attemtps to reinstall hang. When we try to start the
iWS services in service manager they also hang.
We are installing from the Forte for Java partnership CD. This is iWS 6.0
Enterprise.
Please advise of the sequence of steps to erase all trace of the previous
installs (file directories, registry entries and anything else related) so
that we may reinstall iWS with a clean slate.
David Murphy
NetDirect

Hi,
Please ensure the following before you install.
- Have a fully qualified domainname which is mandatory. But for testing
purpose you can have DHCP running usually not recomended for production
environment.
- Installation platform for iWS 6.0 is Windows 2000 Server or Advanced
server recomended.
- If uninstallation hangs remove the entries from the services and remove
the associated folders and then go for reninstalling iWS 6.0
- If the problem still persists, the only way to get rid is to clean the
registry of Windows and make a reinstallation.
Regards
Raj
David Murphy wrote:
Hello - we are still trying to recover our install of iWS on Win 2000. The
uninstall.exe hangs. Attemtps to reinstall hang. When we try to start the
iWS services in service manager they also hang.
We are installing from the Forte for Java partnership CD. This is iWS 6.0
Enterprise.
Please advise of the sequence of steps to erase all trace of the previous
installs (file directories, registry entries and anything else related) so
that we may reinstall iWS with a clean slate.
David Murphy
NetDirect

Oracle 8.1.6 On Win'2000 Server 5.00.2195 SP1

I tryed to Installed Oracle 8.1.6 On Win'2000 Server 5.00.2195 (Stardard Edition) SP1....The Moment I clicked on Oracle Universal Installers mail page "Install" the page closes down and the next page never comes...
Please Help !!!!!

Hi,
I don't have a suggestion, but I can say that I am running fine with the exact same configuration. Win2k server, sp2 and Oracle 8.1.6.

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.

Hello!
IS THERE ANYONE WHO CAN HELP ME?????????
Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
I am not having password for sap community market place.
So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
1) SAP 4.7 GUI
2) JAVA
3) SAP KERNEL
4) ORACLE 9.2.1- 3 CD'S
5) SAP EXPORT- 7 CD'S
Plz. Help me in this.plz.mail me on my ID- [email protected]
Thanks & regards,
Sandeep Chaudhary
m-09312406060
0129-3260483,4120483

how come you have the cds and no access to sapnet? strange....
basically these are the steps:
-> install win 2k server
-> check for all hardware and software requirements (needed for sap installation)
-> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
-> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> apply post-installation steps
but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
GreetZ, AH

HT1476 Is my iPhone charger covered under the warranty if it no longer works?

My iPhone charger recently stopped working & I don't want to pay for another one. Is there any way I can get one for
Free?

Welcome to the Apple Support Communities
If you are using the charger included with the iPhone, it's covered by AppleCare and the warranty

Flash-9 Beta and Win 2000

Hi
Flash-9 beta version is for Win-XP and above.
Is there any way to install Flash-9 Beta in Win 2000.
Regards

The Flash 9 BETA? Where/how did you obtain this? If you are
truly a BETA tester then you would be
asking on the BETA listserv - not the public forum. You must
have obtained this BETA illegally and
have now announced it publicly on Adobe's forum - I would not
have done such a thing to be honest -
it is illegal for you to have this copy of the flash tool if
you were not legally supposed to be
testing it.
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
ANDR_ew wrote:
> I've installed Flash 9 beta and see no help files at all
in Flash Help (F1)
> section.
>
> Is it OK, or that's a bug?
>
> Is it possible to insert into F1 window a standart Flash
8 Help "books" ("How
> to use help", "Getting started with Flash", "Using
components" ans so on) and
> also a new AS 3.0 help section?
>
> Thanks!
>

HT1476 iPhone charges on dock connected to laptop but not dock connected to wall charger

I used to charge my iPhone at night connected to a wall charger. Sometimes I would get an inverted yellow triangle with the message that the device di not support charging, but it would still charge. Now for some reason it gives the message and really won't charge. I have bought a dock to see if it was the wall charger but although the dock works fine when connected by usb to the laptop, I still can't charge when connected to the wall charger. It is an intermittent problem so I don't think it has anything to do with a dirty connector.

Just to let everyone know, I bought an apple plug and that has solved the problem. Not only does it charge without query but it's twice as fast.
http://www.play.com/Electronics/Electronics/4-/12516928/Apple-USB-Power-Adapter- iPod-iPhone-Charger/Product.html

IPhone charging on Win 2000 PC

Similar Messages

Maybe you are looking for