Iphone completely unresponsive after 2.0.1 update

I tried updating my phone, and now all that shows is the connect to itunes logo on the home screen. Now my phone won't even show up in itunes. So if my phone won't show up in itunes, how do i do a restore. I can't even get the phone in recovery mode. If i unplug the phone, it just keeps flashing on and off. I am at my wits end and do not know what step to take next. And yes I am running the latest version of itunes.

do a permissions check using disk utility and also check for software updates before you run it. Try again. You can also hold down the option key and select and previous versions if you know where they are on your mac book. Here also is a site:http://iphonefreakz.com/iphone-firmwares/
Michael

Similar Messages

OS keyboard and mouse completely unresponsive after 10.6.1 update.

Hello,
Snow Leopard was running fine. I updated to 10.6.1 and now the computer boots up normally (background programs seem to be running fine) but the keyboard and mouse are completely unresponsive. I am even unable to dim the screen, change the volume etc etc. I was able to go into safe mode but then keyboard and mouse again are unresponsive.
Please help!
Thanks.

I had something very similar happen. I shut the lid on my MacBook. When I opened it up, I tried to type in my password (I have it password protected when it sleeps) and none of the keystrokes did anything. I had to hit the power-off button to cold boot the computer.

I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.

I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.
My MacBook Air is connected and my roommates phones are also connected, but my iphone that always was connected to the same network is no longer connecting to the wifi.
The network is shown on the device but I can't join it.
Whats going on? Does someone know how to solve this issue?
Thank you!

Problem persisted after fixes were done so wife called apple today. Their fix is to turn cellular off when in the house and turn it back on when she leaves- the 4 doesn't keep the password so she has to enter the password too... This wasn't a fix ...it's just resolving the connection problem... They also said that they made ios6 have security features so nobody can hack into the wifi without having the password and it has to be entered to use the wifi. My 5 and the iPads stay on with no problems. It's just the 4. So far so good...she's had wifi all day when home. It's inconvenient but it's either completely reboot it with iTunes (which doesn't work for her) or buy a new phone and she won't do that either.
So...Apple is saying that she didn't have to do the updates either and could've stayed with the previous iOS but !!!too late now!!! We've updated because we think our phones will run better but the ios6 just made it a pita for users
I wonder if the hackers of the world are having as many issues as the peeps who are just trying to use their wifi??

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

HT201412 iPhone 3GS unresponsive after updating to iOS 6.1.3

My unlocked iPhone 3GS's touch screen and volume buttons has become unresponsive after allowing iTunes 11.0.2 to update the iPhone to iOS 6.1.3. I have tried restarting, resetting and restoring the iPhone several times. It will no longer function at all without a SIM so I purchased an "Amaysim" prepaid SIM so I could use the phone however this has not acheived anytihng.
My phone is now a brick - any help would be greatly appreciated.

Hello !
Just try to restore your iPhone, if it don't work, bring it to the Apple Store, they will help you with your product
Hope I Helped !
Raphaël Touchette

IPhone acting wierd after 1.1.3 update.

After the new software update, my iPhone screen stops responding randomly. It only happens while I'm on safari and the iPod. It only happens rarely on the iPod, but when on safari, it happens enough to be a nuisance. Is this a problem other people are having or is it my iPhone itself?

Have you tried the troubleshooting steps in the order I provided with my first post in this thread with the last being calling AppleCare or making an appointment at an Apple Store?
This is not normal except for getting slow to think from time to time with powering the iPhone off and on - which should be done with a GSM phone every few days or so regardless or a Reset which should take care of this aspect.
I power my iPhone off and on each morning before beginning the day and I usually do a Reset once a week or so just to keep things running smooth.

Iphone 4 problems after 7.0.2 update--Especially with keyboard entries

I am having serious iphone 4 problems after installing the 7.0.2 update. Mostly it is with use of the keyboard. Each key stroke takes about 8 seconds to show. It is truly disabling. Apparently many others have had various problems. The one thing the Apple Tech would tell me was that 7.0.2 cannot be uninstalled. I have restarted & reset. Settings shows I have more that 20 free GB of space, though I don't know if that's important.
Sure would appreciate help! Thank you!

settings - general - reset - reset network settings.
also turn off automatic app updated...

Playlists gone on iPhone 6 plus after 8.1.1 update

Just installed 8.1.1 on my iPhone 6 plus and all my playlists have disappeared of my iPhone not to mention it is now re-syncing all my music files to my iPhone again. Some 5500 songs so this will take forever. Is there anyone else who has also suffered from this problem after the update? I am sure i will run into more issues after this latest pump update.

I Did the reset and it does not work. It will revert back to the original ringtone when I enter or leave a new wifi. Whenever I re purchase, I notice after it loads it will pop back up with the purchase price. Ugh!
But I've spoken with numerous people with the 6's and spoken with the Apple techs and it just looks like a bug that needs to be waited out. im sure with the next upgrade (which is hopefully sooner then later) the problem will be solved. So until then we get crappy ringtone options

Iphone completly unresponsive.

Okay so my iphone 4 ios 6.0 is completely unresponsive , wont respond when plugged into wall (with several different chargers - for hours at a time) wont enter dfu (home & power button does nothing.) itunes or computer wont recognize it. no apple logo & or "connect to itunes" no battery symbol nothing. help ? ive tried everything -

It sounds like you know how to do all of the possible resets and have had no success - so unfortunately as you have probably realized, it does appear that your iPhone needs to be replaced.

Iphone wont charge after iso7.0.3 update

I updated my iphone 4s to the current ISO 7.0.3 yesterday morning after my phone had been charging overnight.I had a full battery after the update but when i came to put on charge again last night it wouldnt charge. I have tried 3 different charging stations but nothing is charging it. Can anyone help?

I have the same problem. I have an iPhone 4 and after upgrading to iOS 7.03 (my first upgrade to iOS 7), my phone volume is almost inaudible. I have the same problem with the headphones for phone calls. Listening to music on my headphones works fine. I have also done a restore and set up as new phone and it doesn't fix the problem though it wasted 4 hours.

Iphone 5s bricked after ios 8.02 update

Yesterday I attempted to update my iphone 5s to ios8.02. The update didn't appear that big and my wifi is currently out so I decided it should be ok doing it with 3g. The update appeared to download fine and I proceded to install. The loading bar was on for about 5 minutes at which point I left it to do stuff around the house, when I came back the phone was stuck on the black screen with the apple, I left it longer and noticed every minute or so the screen would flash blue then go back to the apple. I can't turn off the phone or restart it, I simply wait until the battery finishes. I've tried since the battery emptied but still the same situation.
Are there any fixes I can try myself as I am in Sardinia and as far as I can see there are no authorised dealers nearby.
Btw nothing unusal installed on my phone just ios 8.01

Hi Si7,
Welcome to the Apple Support Community!
I understand that you attempted to update your iPhone to iOS 8.0.2 but the update never finished. In this situation I would recommend working through the troubleshooting steps outlined in the attached article.
iOS: Not responding or does not turn on
Cheers,
Joe

Home button unresponsive after iOS 7.1 update (iPhone 5)

Hi,
I just updated my iPhone 5 to iOS 7.1 on Monday. But today (Thursday) my home button suddenly unresponsive. The phone had been working normally until now when I was on FaceTime and tried to view my home screen but couldn't.
Turning the phone off/on doesn't fix it. Once I turn off the phone and turn it back on, I can see the homepage and enter any app but I can't escape that app without shutting down the phone again.
Also, there is no damage to the phone/home button in any way (physical, water, etc.) I can't reset the phone because, you know, the home button won't respond.
How can I remedy this? Is anyone else having this problem?

I had the same problem and kept playing around with the phone and doing internet searches. This seems to have fixed the problem. I went to Settings, General, Accessibility and then Home-Click Speed. I changed from Default to Slow.

IPhone not charging after 1.1.3 update

This may or may not be related to the 1.1.3 update. My update went fine yesterday. Took my iPhone home with a full charge. This morning, the phone had turned itself off, as the battery had drained. I did not have either Wi-Fi or Bluetooth connected, and had no open applications (e.g. Show Traffic was not on). Now it seems that the iPhone will not receive any charge either from the dock-computer, or directly from the wall power socket, using the power adapter supplied.
The phone is legal, and has no 3rd party apps on it, or ever has had.
Anyone else experience this and can provide more information, or a fix?
Cheers.

I also had this problem after the 1.1.3 update. The problem is not that the phone is not recharging, but that it is not indicating that it has been recharged. To fix, simply reboot or do a hard reset:
Press the home button (the big circle below the screen) and the sleep wake button (the button on top of the iPhone) simultaneously.
Hold both buttons simultaneously for a few seconds, Ignore the "Slide to power off" and keep holding
The iPhone should now shutdown automatically - (fade to black)
Turn the iPhone back on by hitting the sleep/wake button.
You should now see the Apple logo, your iPhone is restarting and thus booting up.
You have completed a hard reset successfully.
The Iphone should now correctly indicate its level of charge.

IPhone 4 Dead after i0S 4.3 update went wrong.

So after finally getting round to downloading and installing 4.3 (haven't updated the iOS at all since getting it last July) I find out I can't download more than 80% or so of the update without the connection "timing out". Note, no other problems downloading large files using the same connection.
I then downloaded the iOS from a different source (macworld) and the update seems to run smootly until it gets to the "verifying your update with Apple" point at which I get a "the update could not be completed error 3194 message"
Getting pretty annoyed at this point and decide to go for a hard reset and restore after saving all my purchases to see if that makes a difference (by holding the home and power keys for 10 secs then letting go of the power key) and the iPhone's screen turns black.
It's completely dead now and I can't use it at all.
If I try to restore the phone I am in the same situation as before as iTunes will only allow me to restore if I download and install the latest iOS. I can't download it via iTunes, and I can't install it if I get it elsewhere.
Any ideas?

Disabling firewall software during the update is what the regulars on this forum recommend when having problems accessing Apple's servers. And it does sound like you do.

Late 2013 Keyboard / Trackpad still unresponsive AFTER EFI 1.3 update

I thought I would start a new thread / discussion since the previous thread here seems to be riddled with "install the update" suggestions and off topic assistance such as battery life questions. I have also logged detailed information regarding this issue on my professional blog here.
Anyway, here is a short, condensed version of my story. I have had two brand new late 2013 Retina MacBook Pro's with the 2.4/16GB/256 configuration. Since the config I chose is a CTO, this problem has been going on since the day the first model arrived (December 10th, 2013). The EFI update was preinstalled on both systems and I can verify that because the boot ROM version is MBP111.0138.B03 (the boot rom prior to the update ended in B00 or B01). I am also an AASP and an ACMT meaning that I am certified and employed with a company that allows me to fix all Apple hardware under warranty. I am well-versed in technology and Apple hardware and I have never seen anything quite like this.
Here is the quick summary of things I have attempted and I have been able to re-recreate the issue:
The system will not mount the root device when I boot via a known good external hard drive running 10.9.1. Verbose mode and Single user mode reports a still waiting for root device error.
The system (rMBP) will not boot from another system (late 2011 MacBook Pro 13") when said system (late 2011 MacBook Pro) pushed into target disk mode via thunderbolt.
My system, rMBP, will boot up with the internal SSD but will not allow the keyboard and track pad to function. The caps lock key will not illuminate. The keyboard and track pad will work OUTSIDE of 10.9.1, however. I have installed a clean internet recovery version of Mavericks over 4 times.
If I put my system, rMBP, into target disk mode and connect to any other computer via thunderbolt and boot it on the other Apple systems, the operating system running on the internal SSD of the rMBP will work just fine -- keyboard and mouse included (again, as a target disk mode thunderbolt connection to another host).
If I use a remote agent to connect to my rMBP such as LogMeIn or vnc, the keyboard and mouse will work just fine from the remote system which leaves me to beleive that this is not a software issue nor is it fully a hardware issue since the keyboard and mouse work outside of mavericks.
I believe we are still dealing with a firmware issue here. It took several tries to create a bootable device for the late 2013 rMBP since NONE of my other up-to-date and verified working external drives will boot but I finally created a bootable USB stick. When I run the system from the USB stick, the keyboard and trackpad will work but if I touch the keyboard and / or trackpad in 5 second intervals, I will receive the following error:
1/4/14 4:44:41.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:45:00.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:45:43.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:49:03.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:50:20.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:51:24.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:52:49.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:53:00.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:53:10.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:55:25.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:56:07.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:57:06.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:58:40.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
1/4/14 4:59:45.000 PM
kernel[0]
The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
I had actually created a system log query to search for the above. The search string includes "the USB " and any entry after 1/1/2014. The above error should only present itself when waking an Apple system from sleep and instead it happens on every touch after, at least, a 5 second period of non-use.
When I remote into the system using LogMeIn, VNC or even use an application called ShareMouse which shares the keyboard and mouse of my Windows system with any other computer on the network presuming they have ShareMouse also installed, I can use the system as I would expect, without continuous error in the console log. When I check the system information, Bluetooth is completely disabled and the USB hub does not report address information. Since the keyboard, track pad, Bluetooth peripheral and USB ports all sit on the same USB stack / hub this leads me to think there is a firmware / driver failure occurring after Mavericks loads. The only two errors I see when I am using a remote keyboard and mouse via a remote service is as follows:
1/5/14 6:58:16.000 PM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfa000000) may have caused a wake by issuing a remote wakeup (2)
1/5/14 6:58:16.000 PM kernel[0]: The USB device Apple Internal Keyboard / Track pad (Port 2 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
Bottom line: Even for those of you who have installed the EFI 1.3 update and have verified that your freezing issues have ceased, for the most part, could you check your console log for the above error. My guess is, you will still see the error repeated there in 5 second intervals if you touch the keyboard, put your hands up for 5 seconds, touch the keyboard and / or track pad again. My concerns is that this is a product line issue since it has occurred on two brand new systems and the log errors appeared on another model on display in an Apple store. (The display model was logged into an Admin account so I took the liberty of checking the console log.)

I'm tired of this message. Bought a Mac 13" retina from bestbuy that was shipped to me on December 24th. The finder took a long time to load 'All My Files' with three to five second delay. My older macbook unibody (late 2009)was instantaneous. My wife's macbook aluminum (2011) also loaded the files instantaneously. Sorry I digressed but while I was trying to research that issue, I was caught up in the console and multiple of these,'The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)' kept showing up whenever I touched the trackpad in intervals of 6-7 seconds.
Called up apple, used screen sharing and after spending an hour was transferred to the second tier tech. The second tier rep troubleshooted and told me it WAS an issue and asked me to go to apple store to run diagnostics and that most likely I'll receive another notebook in exchange since it fell within 14 day period. I told him the internet was filled with this discussion and asked if it was prevalent. He said it was the first time he has come across this issue and most forums on the internet may not be addressing my specific issue. I wasn't convinced and simply returned it at best buy.
The unfortunate thing is I sold my macbook unibody and having owned 2 macbooks for last eight years I caved and ordered another 13". After a week and a half I received it today and guess what, I see the same message filling up my console.
I noted the following,
* Use guest account and you'll never see the message,'The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)'. All admin accounts created will throw that error.
Though off topic I'd like to state what happened with the Finder's 'All my files' issue:
1. Once I upgraded my older macbook unibody to mavericks, the 'All my files' took longer to load as the new macbook pro.
2. I was able to replicate the same slow load times with macbook aluminium(2011) when I upgraded it to mavericks.
Oh, I also showed the slowness to the representatives and all they tried doing was reindex spotlight which did no good.
So much for 1799$ notebook and the "free" OS. Very disappointed.

Iphone completely unresponsive after 2.0.1 update

Similar Messages

Maybe you are looking for