IPhone Configuration Utility and Iphone 3G
Hi,
I'm a small developper working for a small company.
My problem is, a lots of people on the company have allready buy the new iPhone 3G and I can't send them the software using the "iPhone Configuration Utility" because I get this error when I try to install the software.
Error:
An error occurred while installing the application on the device. Error code : -402653183
An Image: http://img186.imageshack.us/img186/5039/imagem1uw3.png
Sorry by my bad english :P
Thank you!
and... When my clients try to intall this app on iTunes they get a error with the code: 0xE8000001...
What's the problem?
Similar Messages
-
What happened to Thinkpad Configuration Utility and UltraNav Wizard?
I ran System Update and installed the latest Thinkvantage software -- and two existing utility programs disappeared: Thinkpad Configuration Utility and UltraNav Wizard. I'm surprised because there was no indication this would happen. And I'm concerned about losing function. In particular, I found the Configuration Utility an easy way to configure my laptop.
I have a W500 running Windows XP.mlinehan wrote:
I ran System Update and installed the latest Thinkvantage software -- and two existing utility programs disappeared....
I have a W500 running Windows XP.
AFAIK, the ThinkPad Configuration Utility isn't supported for any Thinkpad later than the T60 models..... it may partially work on a W500 but there are almost certainly some things that wont work.
If you are happy running unsupported utilities, its available here.....
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4ZFRG3
Cheers,
Bill
I don't work for Lenovo -
Cannot Install Thinkpad Configuration Utility and Cannot Find it on Downloads Site
I uninstalled the Thinkpad Configuration Utility and when I try to reinstall the installation fails. It no longer seems to be a download option on the Lenovo support site. Has this utility been withdrawn and if so what replaces it? This link
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67988
with the latest BIOS update talks about using the utility to determine which version is installed which would seem an odd thing to do if the utility is no longer supported!
Message Edited by BMGRAHAM on 05-16-2008 12:00 AMHi,
Pls check the site
http://java.sun.com/xml/jaxb
The JAXB Beta Implementation is now available.
Thanks,
Bhakti
I am looking for JAXB and cannot find a download link.
The only thing at the download link is the jaxb arch
spec, but no s/w.
Where is this stuff? Has it been taken off?
-Mark Sabatini -
So as the title says, after I got my iPhone 5s from apple, factory unlocked, my brother used his sim card in it for a moment to allow it to be registered and usable on WIFI until I made it to Japan. Now that I have a data SIM card, I have to input specific APN settings, which are located in settings>cellular>cellular data network, however, cellular data network is not available as an option. I have reset the phone multiple times with and without backups and with and without the new sim in the phone. I have also used the configuration utility to try to put the APN settings in the phone. I contacted Apple and they didn't really have an answer as to what i should do. My brother checked his Verizon account and my phone does not show up as one of his devices, so right now I'm stuck with and incredibly expensive iPod. Does anyone have any idea what I can do to remedy this? I am unable to contact Verizon via telephone myself as I have no phone service. Any help would be greatly, greatly appreciated.
You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada -
Purpose of Configuration utility and shared services????
What is the configuration utility ? what is the purpose of this.
what is the shared services and purpose.
Plese do not say " interview questions, please refer docs" .
Please i need a brief just for some idea.
Regards
EshwarConfig Utility within Shared Services is to configure the Essbase Applications which are designed to work with Shared Services.
With the Configuration Utility, you can configure individual applications once they are registered with Shared Services. You can:
1) Deploy to Application Servers
2) Configure Repositories
3) Choose Application specific option
Depending upon which application you are configuring, you will see different options.
Shared services, as the name suggests, is to manage all the shared components within all the Hyperion applications which can work with Shared Services. Apart from config utility, another big use of its is to manage the users.
Hope this helps.
Nitin Malhotra -
802.1x WEP & iPhone Configuration Utility
Hi All!!
I have just arrived back from our Easter vacation to find the school I work for has changed wireless from WPA-PSK to 802.1x WEP. It didn't take long for me to change my MacBook Pro over to the new settings, but we (our IT Guys and myself) are having great difficulties with the iPhone Configuration Utility and the resulting Profile file. A continuous error message of "Unable to join the network "School_Name"".
We have been using the same configurations for the iPhone in the Configuration Utility as we did for the MacBook Pro, but I keep having the feeling that we are missing something. I am a complete novice when it comes to this side of computing, but any help would be greatly appreciated.
Here are the preferences we have been using:
*_Network Prefs_* (Taken from MacBook Pro)
Network Name: School's SSID
Security: 802.1x WEP
User Name: Domain Login Name
Password: Domain Password
*_802.1x Prefs_* (Taken from MacBook Pro)
User Name: Domain Login Name
Password: Domain Password
Wireless Network: School's SSID
Authentication: TLS
TLS Certificate: VALID
*_iPhone Configuration Utility_*
We are little stuck as what to use for the Identifier under the General Tab in the iPhone Configuration Utility.
We have set the Security Type to WEP Enterprise with the EAP Type as TLS.
Under the Credentials Tab, we have generated a "School" certificate and a "User" certificate to be uploaded. These are the same type of certificates I have installed in my KeyChain on the MAcBook Pro.
The subsequent Profile which is generated is uploaded to the iPhone via email and is installed successfully. The profile shows that it is verified. But, no connection is made. The iPhone is not even showing up on the AIS Server log.
I hope that I have supplied enough information. If not, please ask for more.
Thanks in advance.
RodgerUpdate your iPhone Configuration Utility.
There is a new option under "Security Type" Called "WEP Enterprise" This is 802.1X WEP.
Have Fun -
Iphone configuration utility free app question
If I use the iphone configuration utility to add a free app to our devices, will end users be able to update the app without my credentials?
Thank you for your concern.
Unfortunately, I tried various fixes, like changing the USB cable, choosing another USB port, trying it on the Boot Camp partition, trying it on other Machines and PCs, I even restored my iOS, but nothing got the Configuration Utility to like my iPhone...
What I did then was mailing the certificates to myself and by simply opening the attachements within the Mail App on the iPhone it allowed me to install it from there.
Long story short: it turned out I could do it without the Configuration Utility and that the iPhone is capable of configuring/installing the profiles directly when you send it over. -
Where can I find the iPhone Web Configuration util for Windows?
Hi,
Struggling at the moment with the iPhone Config Util v2 on Windows - I can't get our Exchange account settings to stick. I have previously used the web configuration and that worked everytime, but now I've lost my installation somewhere. Saying that, that was on v1/v2 iPhones.
Where can I download this older utility?
Is there an issue with the new configuration util and v3 phones? Does the new configuration work with self-signed certificates? Ours just seems to report authentication errors when trying to set the profile up.
Any ideas?
NeilI just contacted Fedex and they advised that a MSDS is not required with shipments of iPhones to/from the US.
-
Is the iPhone configuration utility borked?
I've downloaded the iPhone configuration utility and am trying to setup a generic configuration file so that ANY user on our network can download it and then be prompted to enter their username & password to set them up.
Seems it doesn't work that way, regardless of the admin guide PDF.
Under the Exchange tab, i've configured the Account Name, Exchange ActiveSync Host but when i leave the User and email address fields blank, then export the configuration file, when it's imported the first thing that it prompts for is a password. What good is a password if you have no username????
I created a new configuration file with my username/email address and imported that, it prompted me then for my password and it worked fine.
How can I create a generic configuration file that will prompt a user for their username and password (and have the server address and other options hard coded into the profile so they can't be changed)?
The admin guide seems at odds with the configuration utility, and contradicts it.
All advice appreciated
Cheers
Shane.Hi,
You are using the Config Utility on a Windows PC, right? I've had the same phenomenon: Apparently, there's a bug in this version that doesn't create a proper config profile when you leave the Exchange Account name blank. (The Mac OS version does it properly.)
As a workaround, after exporting your profile from the Config Utility, open it with an XML editor (even Word will do), look for the Exchange Account Name key and string ("PayloadAccountName" I think it is), and delete them from the profile. When users install this modified profile, it should ask for the username as well.
HCD -
IPhone Configuration Utility showing question mark as device picture
My iPhone Configuration Utility doesn't work properly and I don't know how to solve it. As you can see in the picture, the Configuration Utility shows a question mark insted of the device picture of my iPhone 5 (iOS Version 6.1.3).
I can't find out what the reason is, but I guess it is the cause why I can't install my Configuration Profile (Message: "Profile Installation Failed", "The profile could not be added to the device."). I tried enabling encryption of backups of my device, but the configuration profile still fails to install.
Any advice?
Thanks in advance!Thank you for your concern.
Unfortunately, I tried various fixes, like changing the USB cable, choosing another USB port, trying it on the Boot Camp partition, trying it on other Machines and PCs, I even restored my iOS, but nothing got the Configuration Utility to like my iPhone...
What I did then was mailing the certificates to myself and by simply opening the attachements within the Mail App on the iPhone it allowed me to install it from there.
Long story short: it turned out I could do it without the Configuration Utility and that the iPhone is capable of configuring/installing the profiles directly when you send it over. -
How to download Apple iPhone configuration utility
I Have a unlock iphone 4S, This phone origin carrier from sprint, I bought it when travel to Netherlands in year 2013.
after return to singapore found this phone need to unlock, I bough unlock SIM card to unlock it. When I upgrade my SIM card found that APN setting missing.
I download iphone configuration utility and solve my problem the previous time. But now I can't find this software any more. Will Apple have latest software or other s for me to solve APN setting.Replaced by Apple Configurator:
https://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Your iPhone was not unlocked, but hacked. Any iOS upgrade or restore
will relock it. Contact Sprint to see if you qualify for an unlock. -
Create folder in Configuration Utility
Is it possible to create folders on the Homescreen in the iPhone Configuration Utility.
I created some WebClips in the Configuration Utility and want to group them in one folder on the Iphone.
Thanks for help!its as
Dim oFolderItem As SAPbouiCOM.Folder
Dim oNewItem As SAPbouiCOM.Item
Dim oItem As SAPbouiCOM.Item
oNewItem = oOrderForm.Items.Add("UserFolder", SAPbouiCOM.BoFormItemTypes.it_FOLDER)
oItem = oOrderForm.Items.Item("9")
oNewItem.Top = oItem.Top
oNewItem.Left = oItem.Left
oNewItem.AffectsFormMode = False
oFolderItem = oNewItem.Specific
oFolderItem.Caption = "xxx"
oFolderItem.GroupWith("9") -
hi all
sorry if this is on the wrong catagory
iphone 3gs
winxp pro sp3
itunes 9.1
iphone configuration utility
i have installed itunes and quick time both work with no problems.
iphone configuration utility errors on start up with. failed to locate apple application support.
i have tried removing all of itunes and reinstalling, removed iphone configuration utility and renistalled.
removed all apple software. Then cleaned the registry and C drive restarted and reinstalled.
Extracted apple application support.msi and installed it that way.
All installs done with all security turned off.
Still with no luck does anybody have any other ideas
thanks in advancedIts for use at home.
having had to factory reset it a few times already. And had problems restoring it from backup.
Getting contacts and diary back on was no problem but for email accounts and wifi settings this seemed easier. It worked like a charm the first few times now i get this error message. -
Hi,
I am trying to configure the System 9.3.1, the EAS database confuguration failed, the error log showing the below messafes:
(Nov 11, 2008, 01:25:42 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:252)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Can any one help by providing fix to error.
Advanced thanks for your help and support.
Thanks,
bhavani.Have you created DB-hypdb on DB server and add hypdb as user and set its password as hypdb?
Can you please re-configure EAS by using following steps:-
1- Start Configuration utility and Select only EAS from product option list.
2- Then select only option 'Configure Database'.
3- Then select option 'Oracle' as database.
4- Then give Server Name on which Oracle is installed and give correct port and give user name as 'hypdb' and Password 'hypdb'.
Hope it should work. -
Not able to delete un wanted data source in configuration utility
Hi,
I am on 9.3 version,
I had some Un wanted data sources in my configuration utility and i deleted them but still i can see them, why is this happening?
ThanksDoes it say that the datasource has been deleted in the config utility, have you tried restarting the service.
If all fails then they may have to be manually remove from the planning system database.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
How to convert .iso to .img
i am being driven absolutely madd by my computer. all i want to do is a simple task, yet hours of my life have now been drained. so to save the rest of my time as well as others in the future, how does one convert a .iso file to .img on a mac? (yes,
-
Please, I need help getting into the itunes store. I've tried everything. Even had a computer forensics expert take a look and he could not figure out the problem.
-
Visibility formula for checking on two fields for deciding on visibility of row
I have a row that has groups in it where I need to check for Risks and Issues availability and if both are not there, make the row invisible. If either of them or both are there, go ahead and display. I have the following expression for one of them
-
I'm trying to make a transparency gradient on a image in AI. Does anyone know how to do this?
-
0FI_GL_14 or 0FI_GL_4 General Ledger Accounting Line Items
Hello experts, we should extract the Line Items from General Ledger Accounting. There is a new datasource from SAP 0FI_GL_14 (General Ledger Accounting (New): Line Items of the Leading Ledger) I cant find it in our source system because I think we do