IPhone configuration utility fails during install

Hi, I'm trying to use the iPhone configuration to setup the APN settings on an iphone 4, but every time I try to install, it says the configuration profile cannot be installed on device. When I look at the console, there doesn't really appear to be any type of error that stands out. Why would this keep failing to install for. It's the 3.6 version on a 6.0 IOS This apple stuff is such a pain?
Here is the log after trying to install the profile.
Oct 11 07:42:14 iPhone mc_mobile_tunnel[851] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Oct 11 07:42:14 iPhone mc_mobile_tunnel[851] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Oct 11 07:42:21 iphone backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Oct 11 07:42:21 iPhone kernel[0] <Debug>: set_crc_notification_state 0
Oct 11 07:42:21 iPhone backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Oct 11 07:42:21 iPhone backboardd[52] <Notice>: MultitouchHID: device bootloaded
Oct 11 07:42:21 iPhone backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Oct 11 07:42:22 iPhone kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Oct 11 07:42:22 iPhone kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x624)
Oct 11 07:42:25 iPhone UserEventAgent[13] <Error>: LockStateNotifier aksNotificationCallback posting notification: com.apple.mobile.keybagd.lock_status
Oct 11 07:42:25 iPhone kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Oct 11 07:42:25 iPhone kernel[0] <Debug>: AppleKeyStore:Sending lock change
Oct 11 07:42:26 iPhone profiled[853] <Notice>: (Note ) profiled: Service starting...
Oct 11 07:42:26 iPhone com.apple.misd[854] <Notice>: allowing special port forwarding for test fixtures
Oct 11 07:42:30 iPhone com.apple.misd[854] <Notice>: gave up asking CommCenter, entitlement returned is unknown
Oct 11 07:42:38 iPhone lockdownd[29] <Notice>: 2fe93000 _receive_message: walk away - non-SSL 1
Thanks for you help.

What app?
On what device (model and iOS)?

Similar Messages

Agent Configuration Assistant Failed during install

At the end of Oracle 9i installation, the Agent Configuration Assistant failed with
Parameter"orahome"=/opt/oracle/product/9.2.0
Parameter"nodeinfo"=NO_VALUE
I'm installing Oracle 9i on a Sun sparc ultra 10 with 1 gig of RAM running Solaris 9.
Any help is much appreciated,
Lucas

Thanks for the prompt reply, Joel. I did follow the install instruction. My /etc/system consists of:
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmni=100
set noexec_user_stack = 1
set noexec_user_stack_log = 1
set sys:coredumpsize = 0
My .profile consists of:
ORACLE_BASE=/opt/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/9.2.0; export ORACLE_HOME
ORACLE_SID=solaris; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
TNS_ADMIN=/export/home/oracle/config/9.2.0; export TNS_ADMIN
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1; export NLS_LANG
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data; export ORA_NLS33
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/openwin/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/dt/lib:/usr/ucblib:/usr/local/lib
export LD_LIBRARY_PATH
# Set up the search paths:
PATH=$PATH:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/local/bin::/opt/NSCPnav/bin:$ORACLE_HOME/bin:/usr/ccs/bin:/opt/local/GNU/bin:/usr/local/samba/bin:/usr/ucb:.
export PATH
# CLASSPATH must include the following JRE location(s):
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib

OMS configuration assistant failed during install OEM 10gR2

I'm installing OEM Grid control 10g R2 using new database. Everything ran smoothly till OMS configuration assistant was kicked off. All other configuration tools ran before this one were succeeded.
When OMS configuration tool started, it hung there for a long time, so I "stop" and "retry" it, got message in detail box" /usr/oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same."
In "configToolFailedCommands" file, showing "oracle.sysman.emcp.agent.AgentPlugIn".
I tried to "stop" and "retry", machine was frozen. What can I do now?
Please help. I'm stuck here.
Thanks in advance!

The configuration failed again.
I stopped 9i listener (we have 9i dbs on same server) then ran OMS configuration tool from command line like this:
cd /usr/oracle/OracleHomes/oms10g/oui/bin
./runConfig.sh ORACLE_HOME=/usr/oracle/OracleHomes/oms10g ACTION=Configure MODE=PerformPerform - mode is starting for action: Configure
Perform - mode finished for action: Configure
You can see the log file: /usr/oracle/OracleHomes/oms10g/cfgtoollogs/oui/configActions2007-05-15_01-50-02-PM.log
The content of above log is: ###################################################
The action configuration is performing
The plug-in OMS Configuration is running
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Unlocking Passwords and Out of Box setup is in progress.
The plug-in OMS Configuration has failed its perform method
The action configuration has failed its perform method
Since it failed, I checked <OMS_HOME>/cfgtoollogs/cfgfw/oracle.sysman.top.oms_<Timestamp>.log, saw the following:
WARNING: oracle.sysman.top.oms:getConnection::Connection refused://astham:1521/oemtest:Exception=Io exception: The Network Adapter could not establish the connection
INFO: oracle.sysman.top.oms:Failed to connect to Database for:SYS, sysPwd=******, connectString=//astham:1521/oemtest. ConnectException=Io exception: The Network Adapter could not establish the connection
WARNING: oracle.sysman.top.oms:Failed to initialize JDBC Connection
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on
an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
IN THIS CASE, WHAT CAUSED THE FAILURE? HOW TO FIX? PLEASE ADVISE! THANKS!!!

Database Configuration Assistant fails during instalation of Oracle EE 8.1.7

My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andre

some good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny

IPhone Configuration Utility Not Working

Hi Guys,
I am getting the dreaded error:
"iPhone Configuration Utility failed to locate 'Apple Mobile Device Support'. Please re-install iPhone Configuration Utility."
Actions I have tried (in various combinations):
- Reinstall iTunes (11)
- Reinstall iPCU (3.6.1)
- Copy various .dll files to iPCU directory (as per other suggestions, even though Im not getting a .dll error)
This is on a x86 machine running Windows Vista.
The devices I use get detected in iTunes just fine.
The error message I state above shows as soon as I launch iPCU. No prior error / No error after / No GUI loads - just the above error.
My guess, as per seeing past issues regarding iPCU is that iPCU is incompatible with my version of iTunes/AMDS.
Any trick on getting this working other than waiting for Apple to fix up iPCU? Im tired of reading hundereds of threads of 'solutions' that get me nowhere.
Thanks in advance...

Hi.
I found that most problems with IPCU startup is a some issue with DLLs and programs in the PATH environment variable. And I thinks it's Apple to blame how they load their DLLs. For me the two things prevented IPCU from working:
Some Intel software in "C:\Program Files (x86)\Intel\iCLS Client". I don't know what is it, probably part of drivers or other Intel software on my PC (I have Intel chipset motherboard and Intel SSD). Affected DLL was msvcr90.dll located here.
Zend Server in "C:\Program Files (x86)\Zend\ZendServer\bin". Affected DLLs were: libxml2.dll, iconv.dll .
I also see that it loads zlib1.dll from my "LUA for Windows" folder instead of its own but it seems that IPCU working with it.
So, basically problem occurs because either IPCU or Apple Mobile Device Support load wrong DLLs from some of PATH folders instead of their own folders and those DLLs are incompatible. I have located and narrowed it down by looking into list of loaded DLLs in Process Explorer while IPCU is running (showing its error message box), then checking DLLS that wasn't loaded from one of Windows or Apple folders, and after this I cut folders from PATH variable one by one until it worked, then I returned most of them back except those that affected IPCU startup.

Iphone configuration utility for Windows XP doesn't work.

Getting message when I try to launch Iphone Configuration utility on WIndows XP Sp3 machine - IPCU.exe Procedure entry point not found.
The procedure entry point sqllite23_clear_bindings could not be located in the dll library sqlite3.dll.
Say ok to that and get also a message that Iphone configuration utility failed to locate Apple Mobile device support . Please reinstall, you can download Iphone configuration utility from http://blah blah blah.
I already tried 3.4 and that didn't work. Back rev'd to 3.3 and same error. Running Itunes 10.5 and IOS 5.0 on phone. Any ideas?
Getting ready to deploy about 25 of these and using MS Exchange 2007 as email and active sync. I was hoping to use the utility to help roll out security settings and such.

we noticed the exact same thing. We used IPCU 3.4 and the new feature of setting WiFi proxy which we are very interested in. From Windows, after installing the profile, there was no proxy info on the device UI. From the Mac, the proxy info is there and can be seen from the device UI but it does not work. These proxy settings, even though we can see them through the device UI, do not "stick". They have no effect. HTTP traffic still does not go through the proxy.
Using the Mac is fine as long as we can make the proxy settings "stick", otherwise we have to ask our users again to do them manually. Has anybody found a workaround or something?

IPhone Configuration Utility startup error

I've just updated iTunes and the iPhone Configuration Utility to the latest versions, and I'm now receiving the error 'The ordinal 2760 could not be located in the dynamic link library LIBEAY32.dll.' After I click on 'OK' another notice pops open 'iPhone Configuration Utility failed to locate Apple Mobile Device Support. Please reinstall iPhone Configuration Utilty. You can download it from....'
I've tried removing and reinstalling both application, and rebooting between, before, and after. Nothing helps.
Anyone run into anything similar? I'm using this to configure a ton of new iPhones for our company, and can't continue the roll out.
Any assistance is appreicated.

On Windows, I replaced the libeay32.dll v 0.9.9.1 (intalled with IPCU v3) with libeay32.dll v 0.9.8.8. This file is located in the C:\Program Files\Common Files\Apple\Mobile Device Support directory. I downloaded the binaries from http://gnuwin32.sourceforge.net/packages/openssl.htm.
Regards

IPhone configuration utility wont run anymore

hiya all!
my iPhone configuration utility wont run anymore. in the log i found this:
[2015-02-03 16:59:56.4529 iPCU] Error: Could not get InstallDir key from 'HKEY_LOCAL_MACHINE\SOFTWARE\Apple Inc.\Apple Mobile Device Support'
[2015-02-03 16:59:57.8758 iPCU] Error: Exception from OnStartupInitial: Das angegebene Modul wurde nicht gefunden. (Ausnahme von HRESULT: 0x8007007E)
[2015-02-03 17:01:01.8904 iPCU] Error: Could not get InstallDir key from 'HKEY_LOCAL_MACHINE\SOFTWARE\Apple Inc.\Apple Mobile Device Support'
[2015-02-03 17:01:03.1672 iPCU] Error: Exception from OnStartupInitial: Das angegebene Modul wurde nicht gefunden. (Ausnahme von HRESULT: 0x8007007E)
i disinstalled and reinstalled every software of apple and deleted all folders in the user folder.
anyone can help me?

I get the same error(s) in my log:
[2015-02-10 12:43:46.1048 iPCU] Error: Could not get InstallDir key from 'HKEY_LOCAL_MACHINE\SOFTWARE\Apple Inc.\Apple Mobile Device Support'
[2015-02-10 12:43:49.9609 iPCU] Error: Exception from OnStartupInitial: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
While attempting to start IPCU, I see the very common dialog error "iPhone Configuration Utility failed to locate 'Apple Mobile Device Support," but trying some of the .dll copying/replacing techniques seen in other threads doesn't fix it.
I believe there is something about the Log statements that will lead to the root cause, as it seems completely different than the other threads with similar errors. I'll report back if I figure it out. Good luck.

Iphone configuration utility problems on XP Pro?

Anyone have a similar problem to mine in using the iPhone configuration utility? I installed it on a Windows XP Pro system with .NET 3.5 sp1 and Office 2007 Sp1. The utilitu launches fine, but the actual window is invisible. Even if I maximize it the window never appears.

If you never created a password the default should be just hitting enter - nothing else.

IPad2 w/iPhone Configuration Utility wont install profile

I'm trying to use the iPhone Configuration Utility 3.6.2 from a windows 7 SP1 on an iPad2 running iOS 7.0.3 (11B511) but when I try to install a profile nothing seems to respond. I don't get any feed back on the iPad or from iPhone Configuration Utility. I know the name is iPhone Configuration Utility but from what iv read it it compatible with iPads aswell. I need this or something like this to keep the iPad from auto-connecting to open Wi-Fi in a businesses environment. Its not as easy and putting a password on the open Wi-Fi signals because we do not control the other businesses around the one we support. Forgetting the connection also wont work once the iPad looses connection with the correct Wi-Fi and is looking to reconnect.
This is what's in the console after trying to install the profile.
==== Attached at 6/6/2014 1:56:47 PM ====
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController isVisible]: _visible(1), _formSheetVisibile(0)
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: currentTrackedNetworkSSID(HH), currentNetworkSSID(HH)
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: Current == Tracked, nothing to do but reload the specifier
Jun 6 13:44:21 Preferences[111] <Warning>: void unloadAPTableCellImages(): unloading images
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:36 Preferences[111] <Warning>: Scan error: Error Domain=com.apple.softwareupdateservices.errors Code=40 "The operation couldnt be completed. (com.apple.softwareupdateservices.errors error 40.)" UserInfo=0x165cb010 {NSUnderlyingError=0x179e5000 "The operation couldnt be completed. (ASError error 22 - Unable to copy asset information)"}
Jun 6 13:44:36 kernel[0] <Debug>: 085768.801757 wlan.A[615] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -67
Jun 6 13:44:40 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:44:40 itunescloudd[88] <Warning>: Updating media purchase history for periodic poll...
Jun 6 13:44:40 itunescloudd[88] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:44:40 syncdefaultsd[288] <Notice>: (Note ) SYDAccount: no account
Jun 6 13:45:10 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:45:10 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:45:10 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:45:10 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:45:11 syncdefaultsd[288] <Notice>: (Warn ) Initial test for reachability failed. Let's mark service as unreachable for now
Jun 6 13:45:12 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:45:17 imagent[56] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Jun 6 13:45:17 imagent[56] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
Jun 6 13:45:17 identityservicesd[54] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
Jun 6 13:45:40 itunescloudd[88] <Warning>: Jalisco periodic update failed with error Error Domain=JaliscoImporterErrorDomain Code=-1 "The operation couldnt be completed. (JaliscoImporterErrorDomain error -1.)", trying again tomorrow.
Jun 6 13:45:40 itunescloudd[88] <Warning>: Jalisco periodic update failed with error Error Domain=JaliscoImporterErrorDomain Code=-1 "The operation couldnt be completed. (JaliscoImporterErrorDomain error -1.)", trying again tomorrow.
Jun 6 13:45:42 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:45:42 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:45:42 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:45:42 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:45:44 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:46:14 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:46:14 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:46:14 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:46:14 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:46:17 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:46:47 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:46:47 timed[18] <Notice>: (Error) CoreTime: Failed to fetch NTP time.
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Received source unavailable from "NTP"
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:46:47 from NTP because time is unchanged
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.77hrs.
Jun 6 13:48:19 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.575822 wlan.N[616] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 6, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587416 wlan.N[617] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587541 wlan.N[618] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=244 ssid[ 2]='HH'
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587681 wlan.A[619] Active Ports:
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587797 wlan.A[620] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:48:19 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:48:19 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:48:19 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:19 kernel[0] <Debug>: 085992.588593 wlan.A[621] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:48:19 Preferences[111] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jun 6 13:48:19 Preferences[111] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x166cdb10:<VPNBundleController: 0x166cdb10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.635542 wlan.A[622] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.819125 wlan.N[623] AppleBCMWLANCore::setASSOCIATE(): [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Jun 6 13:48:19 kernel[0] <Debug>: 085992.861776 wlan.N[624] AppleBCMWLANCore::resetAutoCountry(): EnhancedLocaleEnabled: 0, HostCountry:0, fDefaultCountryCode:XZ, fCurrentCountryCode:XZ
Jun 6 13:48:19 kernel[0] <Debug>: 085992.990914 wlan.N[625] AppleBCMWLANJoinManager::join Beacon Info: @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:48:19 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224374 wlan.A[626] Active Ports:
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224496 wlan.A[627] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224603 wlan.A[628] AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224716 wlan.N[629] [bringUpLink] AppleBCMWLAN Joined BSS:     @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224833 wlan.A[630] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 50, fAverageRSSI -85
Jun 6 13:48:20 kernel[0] <Debug>: AirPort: Link Up on en0
Jun 6 13:48:20 kernel[0] <Debug>: en0::startOutputQueues (0)
Jun 6 13:48:20 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:48:20 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:20 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:48:20 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:20 kernel[0] <Debug>: 085993.277251 wlan.A[631] AppleBCMWLANCore::setProperties(): Active during sleep supported (true)
Jun 6 13:48:20 kernel[0] <Debug>: 085993.288500 wlan.N[632] AppleBCMWLANCore::startRoamScan(): 3596 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Jun 6 13:48:20 kernel[0] <Debug>: 085993.540234 wlan.N[633] AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6 WLC_SUP_KEYED, reason = 0 Other reason, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:27
Jun 6 13:49:44 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:49:44 kernel[0] <Debug>: 086003.225683 wlan.N[634] AppleBCMWLANCore::checkIPv4AddressValidity(): Local IPv4 address 192.168.30.201
Jun 6 13:49:44 kernel[0] <Debug>: 086003.234526 wlan.A[635] AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.30.201, entering powersave mode 2
Jun 6 13:49:44 kernel[0] <Debug>: 086003.256205 wlan.N[636] AppleBCMWLANCore::startRoamScan(): 3610 starting RoamScan; MultiAPEnv:0 isdualBand:1 isOn5G:0
Jun 6 13:49:44 kernel[0] <Debug>: 086008.291336 wlan.A[637] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -70
Jun 6 13:49:44 kernel[0] <Debug>: 086077.572850 wlan.N[638] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 6, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584361 wlan.N[639] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584486 wlan.N[640] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584625 wlan.A[641] Active Ports:
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584739 wlan.A[642] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:49:44 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:49:44 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:49:44 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:44 kernel[0] <Debug>: 086077.585529 wlan.A[643] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:49:44 Preferences[111] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jun 6 13:49:44 Preferences[111] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x166cdb10:<VPNBundleController: 0x166cdb10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jun 6 13:49:44 kernel[0] <Debug>: 086077.631113 wlan.A[644] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:49:44 kernel[0] <Debug>: 086077.822276 wlan.N[645] AppleBCMWLANCore::setASSOCIATE(): [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Jun 6 13:49:44 kernel[0] <Debug>: 086077.879917 wlan.N[646] AppleBCMWLANCore::resetAutoCountry(): EnhancedLocaleEnabled: 0, HostCountry:0, fDefaultCountryCode:XZ, fCurrentCountryCode:XZ
Jun 6 13:49:44 kernel[0] <Debug>: 086078.014398 wlan.N[647] AppleBCMWLANJoinManager::join Beacon Info: @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:49:44 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249466 wlan.A[648] Active Ports:
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249590 wlan.A[649] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249673 wlan.A[650] AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249784 wlan.N[651] [bringUpLink] AppleBCMWLAN Joined BSS:     @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249902 wlan.A[652] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 50, fAverageRSSI -85
Jun 6 13:49:45 kernel[0] <Debug>: AirPort: Link Up on en0
Jun 6 13:49:45 kernel[0] <Debug>: en0::startOutputQueues (0)
Jun 6 13:49:45 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:49:45 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:45 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:49:45 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:45 kernel[0] <Debug>: 086078.283974 wlan.N[653] AppleBCMWLANCore::startRoamScan(): 3596 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Jun 6 13:49:45 kernel[0] <Debug>: 086078.304788 wlan.A[654] AppleBCMWLANCore::setProperties(): Active during sleep supported (true)
Jun 6 13:49:45 kernel[0] <Debug>: 086078.559194 wlan.N[655] AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6 WLC_SUP_KEYED, reason = 0 Other reason, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:49
Jun 6 13:50:19 SCHelper[289] <Notice>: active (but IDLE) sessions
Jun 6 13:50:19 kernel[0] <Debug>: 086088.250755 wlan.N[656] AppleBCMWLANCore::checkIPv4AddressValidity(): Local IPv4 address 192.168.30.201
Jun 6 13:50:19 kernel[0] <Debug>: 086088.259534 wlan.A[657] AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.30.201, entering powersave mode 2
Jun 6 13:50:19 kernel[0] <Debug>: 086088.268403 wlan.N[658] AppleBCMWLANCore::startRoamScan(): 3610 starting RoamScan; MultiAPEnv:0 isdualBand:1 isOn5G:0
Jun 6 13:50:19 kernel[0] <Debug>: 086098.326623 wlan.A[659] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -66
Jun 6 13:50:19 SCHelper[289] <Notice>:   0x16e4c220 {port = 0x1803, caller = Preferences(111):MobileVPN, path = /Library/Preferences/SystemConfiguration/preferences.plist}
Jun 6 13:51:09 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:51:09 kernel[0] <Debug>: 086162.568087 wlan.N[660] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 3, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:51:09 kernel[0] <Debug>: 086162.571402 wlan.N[661] Removing any beacons matching:    @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.571530 wlan.N[662] Also removing matching beacon:    @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580290 wlan.N[663] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580409 wlan.N[664] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580547 wlan.A[665] Active Ports:
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580662 wlan.A[666] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:51:09 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:51:09 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:51:09 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:51:09 kernel[0] <Debug>: 086162.581438 wlan.A[667] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:51:09 kernel[0] <Debug>: 086162.646751 wlan.A[668] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:51:10 kernel[0] <Debug>: 086163.643552 wlan.N[669] AppleBCMWLANCore::handleIPv4AddressNotificationGated(): Local IPv4 address 0.0.0.0
Jun 6 13:51:10 configd[55] <Notice>: Captive: CNPluginHandler en0: Inactive
Jun 6 13:51:10 configd[55] <Notice>: network changed: v4(en0-:192.168.30.201) DNS- Proxy-
Jun 6 13:52:50 Preferences[111] <Warning>: void loadAPTableCellImages(): loading images
Jun 6 13:52:50 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: currentTrackedNetworkSSID((null)), currentNetworkSSID((null))
Jun 6 13:52:51 profiled[290] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:53:02 profiled[290] <Notice>: (Note ) profiled: Service stopping.
Jun 6 13:53:28 Preferences[111] <Warning>: void unloadAPTableCellImages(): unloading images
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:54:49 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 15 usbHostConnected true pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:54:49 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 16 usbHostConnected true pairableHostConnected true unpairedPtpAllowed false
Jun 6 13:54:49 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 1
Jun 6 13:54:49 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType USBHost
Jun 6 13:54:49 ptpd[291] <Error>: ptpd: startResponder
Jun 6 13:54:49 ptpd[291] <Notice>: Photo library available
Jun 6 13:54:49 ptpd[291] <Notice>: PTP interface has been activated at high speed.
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 mc_mobile_tunnel[293] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 mc_mobile_tunnel[294] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Received time 06/06/2014 20:55:2160.00 from "MobileLockdown"
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:54:55 from NTP because time is unchanged
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.64hrs.
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Received timezone "America/Los_Angeles" from "MobileLockdown"
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Current mcc: '0' simulated:'0'.
Jun 6 13:54:55 SpringBoard[33] <Notice>: 2014-06-06 13:54:55.113|33|0x17d09ca0: Region monitoring not available or enabled. Trigger ignored!
Jun 6 13:54:55 lockdownd[51] <Notice>: 01ac9000 __copy_itunes_value_block_invoke: com.apple.mobile.iTunes.store/downloaded-apps -> (null)
Jun 6 13:54:56 accountsd[79] <Notice>: 2014-06-06 13:54:56.199 accountsd[79:3947]: Cannot check access to a private account type: (null)
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 atc[296] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:54:56 atc[296] <Notice>: PLMigrationLog <t:0x1659bbc0> loadFileSystemDataIntoDatabase called from +[PLPhotoLibrary _doFilesystemImportIfNeeded]
Jun 6 13:54:56 assetsd[103] <Notice>: PLMigrationLog <t:0x145a6670> loadFileSystemDataIntoDatabase called from -[PersistentURLTranslatorGatekeeper importFileSytemAssetsNoWaitHandler:connection:]
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 geod[262] <Warning>: Can't get bundle identifier for process 261
Jun 6 13:54:56 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] ending transaction <__NSConcreteUUID 0x16d52500> 7FC7AC47-B9A4-4F1D-A704-2014CC662B4A. shouldCommit=0.
Jun 6 13:54:56 medialibraryd[89] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 deleted[261] <Error>: 0x387000 __DeleteLibrarian_block_invoke: unable to determine evictable space: The operation couldnt be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
Jun 6 13:55:00 mc_mobile_tunnel[293] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:00 mc_mobile_tunnel[294] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:12 lockdownd[51] <Notice>: 00201000 _select_socket: receive secure message timeout!
Jun 6 13:55:16 com.apple.launchd[1] <Notice>: (com.apple.iCloudKeychainStats) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
Jun 6 13:55:16 com.apple.launchd[1] <Notice>: (com.apple.iCloudKeychainStats) Job failed to exec(3) for weird reason: 2
Jun 6 13:55:16 geocorrectiond[300] <Warning>: /SourceCache/Maps/Maps-1398.27.4/iOS/geocorrectiond/MCAddressCorrector.m:119 0x17555570 startProcessing - failed. Not authorized (0)
Jun 6 13:55:16 syncdefaultsd[301] <Notice>: (Note ) SYDAccount: no account
Jun 6 13:55:21 daily[302] <Notice>: (0x3d6e318c) carrousel: Could not rmdir /private/var/tmp/MediaCache: Directory not empty
Jun 6 13:55:21 daily[302] <Notice>: (0x3d6e318c) carrousel: Could not rmdir /private/var/tmp/launchd: Directory not empty
Jun 6 13:55:22 mobile_assertion_agent[257] <Notice>: service_one_connection: Connection closed for client (null).
Jun 6 13:55:32 lockdownd[51] <Notice>: 019c5000 _select_socket: receive secure message timeout!
Jun 6 13:55:32 lockdownd[51] <Notice>: 019c5000 _receive_message: walk away - non-SSL 1
Jun 6 13:55:37 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:37 mc_mobile_tunnel[303] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:42 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:42 mc_mobile_tunnel[304] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:42 profiled[305] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Profile MCConfigurationProfile 0x16d6f8b0 has no friendly name.
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: 0x16d6f8b0 Can't parse profile: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Profile cannot be queued for installation. Error: NSError:
Desc   : Invalid Profile
Sugg   : The profile Profile is invalid.
US Desc: Invalid Profile
US Sugg: The profile Profile is invalid.
Domain : MCInstallationErrorDomain
Code   : 4000
Type   : MCFatalError
...Underlying error:
NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:47 mc_mobile_tunnel[303] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:52 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:52 mc_mobile_tunnel[306] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:52 mc_mobile_tunnel[304] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:53 profiled[305] <Notice>: (Note ) profiled: Service stopping.
Jun 6 13:55:59 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 17 usbHostConnected false pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:55:59 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 18 usbHostConnected false pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:55:59 ptpd[291] <Notice>: PTP interface has been deactivated.
Jun 6 13:55:59 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 0
Jun 6 13:55:59 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType Detached
Jun 6 13:55:59 kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService *, void *) - kMessageInterfaceWasDeActivated
Jun 6 13:55:59 kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
Jun 6 13:55:59 kernel[0] <Debug>: USB mux: 446 reads / 0 errors, 931 writes / 0 errors
Jun 6 13:55:59 kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
Jun 6 13:55:59 iapd[105] <Warning>: ERROR - /SourceCache/iapd/iapd-1385.3.1/iapd/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 228 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jun 6 13:55:59 medialibraryd[89] <Warning>: {MediaLibrary} [MediaLibraryService] Cancelling any active or suspended import operations in progress for process <unknown process> (process ID = 296)
Jun 6 13:55:59 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] Cleaning up any remaining transactions for ended process <unknown process> (process ID = 296)
Jun 6 13:56:02 mc_mobile_tunnel[306] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:18 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 19 usbHostConnected true pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:56:18 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 20 usbHostConnected true pairableHostConnected true unpairedPtpAllowed false
Jun 6 13:56:18 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 1
Jun 6 13:56:18 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType USBHost
Jun 6 13:56:18 ptpd[307] <Error>: ptpd: startResponder
Jun 6 13:56:18 ptpd[307] <Notice>: Photo library available
Jun 6 13:56:18 ptpd[307] <Notice>: PTP interface has been activated at high speed.
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Received time 06/06/2014 20:56:4560.00 from "MobileLockdown"
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:56:18 from NTP because time is unchanged
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.61hrs.
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Received timezone "America/Los_Angeles" from "MobileLockdown"
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Current mcc: '0' simulated:'0'.
Jun 6 13:56:19 SpringBoard[33] <Notice>: 2014-06-06 13:56:19.016|33|0x199335a0: Region monitoring not available or enabled. Trigger ignored!
Jun 6 13:56:19 lockdownd[51] <Notice>: 01a47000 __copy_itunes_value_block_invoke: com.apple.mobile.iTunes.store/downloaded-apps -> (null)
Jun 6 13:56:20 accountsd[79] <Notice>: 2014-06-06 13:56:20.203 accountsd[79:10843]: Cannot check access to a private account type: (null)
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 atc[309] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:56:20 atc[309] <Notice>: PLMigrationLog <t:0x16e3fdf0> loadFileSystemDataIntoDatabase called from +[PLPhotoLibrary _doFilesystemImportIfNeeded]
Jun 6 13:56:20 assetsd[103] <Notice>: PLMigrationLog <t:0x145a6ad0> loadFileSystemDataIntoDatabase called from -[PersistentURLTranslatorGatekeeper importFileSytemAssetsNoWaitHandler:connection:]
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 geod[262] <Warning>: Can't get bundle identifier for process 261
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] ending transaction <__NSConcreteUUID 0x16d552c0> 0BA65AAC-C5E8-4460-B229-CD5531260D09. shouldCommit=0.
Jun 6 13:56:20 medialibraryd[89] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 deleted[261] <Error>: 0x283000 __DeleteLibrarian_block_invoke: unable to determine evictable space: The operation couldnt be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
Jun 6 13:56:20 mc_mobile_tunnel[312] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 mc_mobile_tunnel[313] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:26 Chas-iPad lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:26 Chas-iPad mc_mobile_tunnel[314] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:30 Chas-iPad mc_mobile_tunnel[312] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:30 Chas-iPad mc_mobile_tunnel[313] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:36 Chas-iPad mc_mobile_tunnel[314] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:40 Chas-iPad lockdownd[51] <Notice>: 01943000 _select_socket: receive secure message timeout!
Jun 6 13:56:40 Chas-iPad lockdownd[51] <Notice>: 01943000 _receive_message: walk away - non-SSL 1
Jun 6 13:56:59 Chas-iPad awdd[318] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
Jun 6 13:58:21 Chas-iPad medialibraryd[89] <Warning>: {MediaLibrary} [MediaLibraryService] Cancelling any active or suspended import operations in progress for process <unknown process> (process ID = 309)
Jun 6 13:58:21 Chas-iPad medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] Cleaning up any remaining transactions for ended process <unknown process> (process ID = 309)
Jun 6 13:59:09 Chas-iPad lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:59:09 Chas-iPad mc_mobile_tunnel[319] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Profile MCConfigurationProfile 0x1453bd60 has no friendly name.
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: 0x1453bd60 Can't parse profile: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Profile cannot be queued for installation. Error: NSError:
Desc   : Invalid Profile
Sugg   : The profile Profile is invalid.
US Desc: Invalid Profile
US Sugg: The profile Profile is invalid.
Domain : MCInstallationErrorDomain
Code   : 4000
Type   : MCFatalError
...Underlying error:
NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:19 Chas-iPad mc_mobile_tunnel[319] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:59:20 Chas-iPad profiled[320] <Notice>: (Note ) profiled: Service stopping.
Jun 6 14:06:17 Chas-iPad mobile_assertion_agent[257] <Notice>: service_one_connection: Connection closed for client (null).

Bump.
So i read that Apple hasnt updated the iPhone config utility for iOS7 (or at all for a while). Does anyone know of any other config utilities that would allow me to control wheather a Wi-Fi is auto connected to or not? We use iPads in a buinessness envornment and need to be able to connect to one Wi-Fi with other open Wi-Fi connections avalable (but not connected). forgetting an open network doesnt work because it will auto-connect if the iPad looses connection with the main Wi-Fi. Auto-connect should be an option on apple devices but isnt. we cannont be asked if we want to connect to an open Wi-Fi all the time.

Cannot install configuration profiles using iphone configuration utility, why?

I have several working configuration profiles, which I can distribute both via email and a website.
I'd like to install the profiles through the iPhone Configuration Utility, but I am not able to do so. The devices show up just fine in the list. When I choose the Configuration Profile tab and clicking the install-button on a profile (which will install fine via Email or website) in the list, nothing happens. Regardless of the device beeing out of the box, or activated via iTunes. What am I missing?
I have tried this on several iPad and iPad 2 devices with the latest (4.3.3) firmware installed.

Hi,
I have the same problem. After creating profile with only General tab being set up it is failing to install on my iPad.
Profile installation failed
The profile could not be added to device
Any suggestions?
I even erase all content and setting but that didn't help either.
The only alarming thing is that in my Certificate section I have red message:
"This certificate was signed by and untrusted issuer"
Can that effect installation?
If that is the case how to fixed it?
P.S. iPad was purchased from Apple Store.
Regards,

After installing iTunes 10.7 the iPhone Configuration Utility will not open?

I installed iTunes 10.7 yesterday when prompted but can no longer open the iPhone Configuration Utility - nothing happens and there are no errors. Have re-installed the IPCU but it still won't open. Are others having this issue? Any suggestions? Thanks in advance . . . .

I tried,
1) Uninstall Apple Mobile Device Support
2) Uninstall iPCU
3) Reinstall iPCU
But still iPCU does not open. I think it is due to Itunes 10.7.
Also I could not get Itunes 10.6.3 from apple site.
I tried to uninstall complete apple softwares from my system.
Then installed itunes 10.3 and iPCU 3.5.
iPCU worked, but itunes did not recognize connected Iphone 4S.

IPhone Configuration Utility: Email with alias(es)

Hello everybody!
I have to add an email account to two iPhones and two iPads. The account includes many email aliases.
In the iPhone settings there is the possibility to add aliases to an account, but it is long-winded by adding so many aliases.
On my Mac I can add aliases by annexing the aliases after the main address in the address field in the preferences. (e.g. "[email protected], [email protected], [email protected])
So I tried to create a configuration Profile with all account informations in the iPhone Configuration Utility (iPCU). This app is very comfortable for that tasks, but it seems there is no easy way to add an account with aliases! I didn't found a field for aliases in the email tab and the line of action like Mac's mail.app (main address and alias addresses in one text field separated by comma) doesn't work In addition I tried to write all addresses in the email address field separated by semicolon: failed
Note: If I added an Email account to my iDevice via iPCU I'm not able to adjust the email address field in the iOS ettings, so I can't add aliases. If I leave the Email address field in the iPCU in blank, my iDevice request me to enter the address, but I can't add aliases, too (However adding aliases on iDevice that isn't my intention, but maybe it is an good hint for you)
Thanks for you support!

I have exactly the same problem, I bought temple run oz but it says not compatiable with my ipad 1G, I used iphone configuration utility to install it and it works fine, but now I cannot go back to itunes to sync, it says sync completes but never really sync anything
Anyway to help?

IPhone Configuration Utility showing question mark as device picture

My iPhone Configuration Utility doesn't work properly and I don't know how to solve it. As you can see in the picture, the Configuration Utility shows a question mark insted of the device picture of my iPhone 5 (iOS Version 6.1.3).
I can't find out what the reason is, but I guess it is the cause why I can't install my Configuration Profile (Message: "Profile Installation Failed", "The profile could not be added to the device."). I tried enabling encryption of backups of my device, but the configuration profile still fails to install.
Any advice?
Thanks in advance!

Thank you for your concern.
Unfortunately, I tried various fixes, like changing the USB cable, choosing another USB port, trying it on the Boot Camp partition, trying it on other Machines and PCs, I even restored my iOS, but nothing got the Configuration Utility to like my iPhone...
What I did then was mailing the certificates to myself and by simply opening the attachements within the Mail App on the iPhone it allowed me to install it from there.
Long story short: it turned out I could do it without the Configuration Utility and that the iPhone is capable of configuring/installing the profiles directly when you send it over.

Iphone configuration utility database backup

Hello,
We are using at work the iPhone configuration utility to provide configuration to the enterprise iPhone.
Currently, we need to move the utility to another computer.
How do we export the whole database ? I know I can export config one by one, but we need to export the whole content
(hundreds of them, so no way to go on exporting one by one)
regards

I'm not really seeing how to export it. Exporting the .mobileconfig file and then opening it in the iCU on another PC fails if the file is signed, all you can do is remove the signature which doesn't achieve the goal. I won't be able to sign updates to the profile with the same signature so I won't be able to update the profile.
When I run Window > Certificates, I don't see a cert that I can export and then import to an instance of iCU installed on another machine.
Mind elaborating on "Just export it"?
M

IPhone configuration utility fails during install

Similar Messages

Maybe you are looking for