Iphone connect to logitech mm50 speakers

anybody knows how i can connect my iphone to the logitech mm50 speakers?
any particular cables to use?
thanks.

i took off the base and just stuck the iphone right into it. it does pop up and say that it doesn't recognize. But audio goes in and also charges. I would email logitech and ask for a base connector so it can sit perfectly

Similar Messages

  • Ipod video reboots after every song with Logitech mm50 speakers

    Any idea why my ipod reboots after playing one song. It happens if I choose an album, a playlist or all songs. It doesn't matter if the speakers are fully charged and disconnected from the adaptor or plugged in to the AC. I've tried resetting the iPod many times, ordered a different set of speakers thinking they might have been defective. It doesn't happen when I'm using the headphones. I'm really stumped.

    Logitech replied to my question with a solution that worked, just in case anyone else is having this problem. There's a tiny reset button on the bottom of the mm50s. Take the iPod out with the speakers powered off. Turn the speakers on and hit the reset with a paper clip. They will reset then put the iPod back in and hit the power only once and it should work fine. This also took care of a problem with a staticy, lispy sound they were making.

  • Connecting Ipod nano to Logitech mm50 ipod speakers

    I just bought the Logitech mm50 Ipod Speakers and can't hear the sound from my Ipod Nano over the speakers. I have fully charged the battery with the included charger and now want to listen to the music using the included adaptor (which plugs into the wall) to no avail. The Ipod shows the songs are playing, but we can't hear them. Has anyone else had this problem, and if so, can you help me solve this one, short of returning it to the store?

    Hi Sabir,
    Welcome to Apple Discussions
    The Creative speakers should work with the iPod as long as they have a standard headphone jack. I saw some connections from Creative to the iPod, but they were not rated.
    Jon

  • HT204387 Hi I have a iphone4, and I bought harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection just stops.

    Hi, I have a iphone4, and bought a pair of Harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection stops.
    Can you please advise me on the subject
    Regards
    Izak

    This previous discussion discusses the same if not similar problem.
    https://discussions.apple.com/message/6750990#6750990

  • I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    Ask the Verizon store to exchange your iPhone for a different iPhone 4.
    UPDATE - Sure, try ckuan's solution first.  Then use mine if that fails.
    Message was edited by: sberman

  • HT1338 My macbook air doesn't recognise logitech v20 speakers

    I am so sorry i was convinced by others to buy a macbook air - i had an Asus and i am having endless problems with hardware compatibility that no one seems to be able to help me with my new macbook air.  firstly, i now cant connect wirelessly to my networked printer at work - a Dell Color Laser 3110cn and i also cant connect at all to my HP Laserjet 1018 printer (with usb or wireless).  I can also not connect to my Broadband Telstra toggle or to the Logitech V20 speakers.  NO ONE warned me about this when i bought an apple.  I'm so sorry i did!!!

    Okay, I have successfully printed a test page frm the printer itself. It did work correctly with my PC and connected to the PC network that I had previously set up, so I'm pretty sure that ther printer itself is good in terms of being able to print and also it's network capabilities. I also double checked the network password that I entered when I connected the printer to the time capsule network and it said that it did set up a connection point correctly. After I did this I tried to print something from the mac again and it simply isn't bringing up the printer details as already there, or when I try to add a new printer.
    So now I'm at a brick wall and have no idea how to get through / over / round it. Please help anyone.

  • How do i let my iphone connect to my computer wifi with usb ?

    As the title stated,
    How do i let my iphone connect to my computer wifi with USB ?
    The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
    If i don't do this i would have to keep on running out & in to my room & my living room.
    My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
    I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
    Regards,

    I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

  • I installed 10, iTunes no longer connects to airport Remote Speakers

    Boy, this is real irritating. I just use iTunes to stream internet radio to my stereo. It was all working fine, then I updated to v10 and nothing works anymore.
    BIG PROBLEM...the option to choose computer speakers or remote speakers DISAPPEARED. Well, it was there for a second after I ran iTunes 10 for the first time, then the option DISAPPEARED.
    Heck, I even unistalled everything and went back to v9.2.1....But the same problem...ITS GONE!
    Now even I can't get iTunes to even connect to my Airport Express at all to even play music on the computer speakers.
    Grrrrrr. I was all bloody working till v10 came along!!!
    BTW, I'm using Comodo firewall. It was all working before, like I said.

    Well I uninstalled Comodo and turned on Windows firewall. I re-installed iTunes.
    I went into firewall settings and iTunes was checked off (allowed) for both home & public networks. Didn't work. I saw Bonjour on there and just 'home' was checked off, so I checked off 'public' to see if it mattered.
    It did work. iTunes connected to the remote speakers....but for some reason, only for a very short period, then I get a network error.
    This is freaking unbelievable. It was all working fine till I stupidly updtated to 10. Grrrrrrrrr

  • HT201628 so now i've followed this help now i can't re download itunes. i'm on 10.5.8. Still runs great but now i have no itunes. please can a suggestion be made that doesn't involve spending hundreds of pounds? i was only trying to get an iphone connecte

    i'm on MAC OS X 10.5.8. Still runs great but now i have no itunes as i've followed this post that covers my first issue. i've followed it correctly to the part of re install the latest version of itunes and i cant.
    i've been running logic pro on this mac and i have no issues so i've not upgraded software etc.
    i need a way around this problem without having to upgrade the OS if there is one.
    does anyone please have a suggestion that doesn't involve spending hundreds of pounds?
    i was only trying to get an iphone connected and this article says 10.6.8 or earlier?? it is definately earlier
    macbook - MAC OS X v 10.5.8...... trying to connect an iphone 4s os 6
    problem now..........need to re install itunes but can't probably due to my current OS.
    please help. i'm pretty gutted about this. i should of researched a little further me thinks. cheers guys

    said article below....
    HT1747: iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier
    Learn about iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • New IPhone behavior in Logitech PureFi Dock with IOS 6

    I use my Iphone in a Logitech PureFi speaker system as a clock radio. Using a sleep timer at night and a radio or itunes alarm in the morning. I upgraded to IOS 6 and it is no longer possible to use it that way. Previously when the sleep time shut off the Logitech system would go into standby mode after a few minutes and the Iphone screen would balnk out. If you woke up in the middle of the night and wanted to knwo what time it was all you did was touch the screen. When the alarm went off it would also turn the screen on and play the music.
    With IOS 6, when the Logitech goes into sleep mode the Iphone shuts down completely so not clock at night and no alarm. The change definitely relates to IOS 6 since it still works the old way with an unupgraded Ipod touch. I also tried several different clock applications and all behaved the same.
    Has anyone else experinced a problem and found a way to make it work as it did before?
    spec0079

    Hi again, let me share you this portion of itunes(please see image below).  On the advance tab, I previously checked the Contacts portion, do you think this is the cost of losing the mobile label in my IPhone?

  • Itunes no longer opening automatically when iphone connected

    iTunes sees the iphone if I launch iTunesbut it no longer opens automatically.
    could it be a preferences file problem?

    Hmm if click the Apple >> system preferences >> users and groups >> login items, do you have itunes helper listed?
    You can also try this:
    Open in Image Capture in /Applications with your iphone connected.  In the lower left, you'll see "connecting this iphone opens with" (if you don't see it, click the triangle/box icon to show it).  Click the menu >> select "Other" and navigate to itunes and choose that.  Quit Image Capture.
    Test.

  • One wifi spot my iPhone connects to wifi but not internet. All other devices connect to internet.

    My iPhone connects to wifi just fine. When it does it connects to the internet just fine except in one location. My house. My MacBook Pro, my wife's iPhone and her iPad get on the internet there just fine. My Iphone's IP address it begins with a 10. At my house it occasionally will connect to the internet through wifi but I leave wifi off there because it is so intermitent.
    Any suggestions?
    I have not seen this problem addressed.

    Can you ping a website using either Network Utility or Terminal?

  • IPhone connects to secured WiFi network, but can't access Internet

    Problem: iPhone connects to my secured home WiFi network, shows WiFi strength bars at top of screen, displays checkmark, lock, power, and blue arrow on WiFi Networks screen; however, cannot access Internet, iTunes store, stocks, Weather or anything else.
    Tests I've run:
    1. iPhone itself:
    ---DCHP:
    IP Address = 192.168.2.102 (within range automatically allocated by LinkSys router--see below)
    Subnet Mask = 255.255.255.0 (as per LinkSys router)
    Router = 192.168.2.1 (as per LinkSys router)
    DNS = 192.168.2.1 (confirmed by Apple as a valid DNS address given the above information)
    Tests:
    *Forget Network and rejoin--Failed to connect to Internet
    *Forget Network, reboot iPhone, and rejoin--Failed to connect to Internet
    *Reset Netowrk Settings and rejoin--Failed to connect to Internet
    *Reset All Settings and rejoin--Failed to connect to Internet
    *Deleted DNS entry--Failed to connect to Internet
    *Connect to Apple Store unsecured network--Success
    *Complete reset of iPhone at Apple Store:
    **Brought home, made no calls, did not sync with iTunes, did not reenter any info deleted by complete reset, joined network--Failed to connect to Internet
    **Synced data previously saved to iTunes, rejoined network--Failed to connect to Internet
    2. LinkSys router WRT310N:
    Tests:
    *Updated Router firmware--iPhone failed to connect to Internet
    *Entered a Static IP address on both router and iPhone--iPhone failed to connect to Internet
    *Reserved an IP within range automatically allocated by LinkSys router--iPhone failed to connect to Internet
    *Reserved an IP outside range automatically allocated by LinkSys router--iPhone failed to connect to Internet
    *Forced MAC filtering to use iPhone WiFi Address--iPhone failed to connect to Internet
    *Disabled all MAC filtering--iPhone failed to connect to Internet
    *Changed security settings:
    **No Security--Success
    **WAP Personal (AES)--iPhone failed to connect to Internet
    **WAP Personal 2 (auto selection AES or TKIP)--iPhone failed to connect to Internet
    **WAP Personal 2 (forced AES)--iPhone failed to connect to Internet
    **WAP Personal 2 (forced TKIP)--iPhone failed to connect to Internet
    *Changed security WAP Password/Passphrase:
    **10 characters (alpha numeric)--iPhone failed to connect to Internet
    **12 characters (alpha numeric)--iPhone failed to connect to Internet
    **10 characters (alpha numeric/ Uppercase alpha)--iPhone failed to connect to Internet
    **10 characters (alpha numeric/ Lowercase alpha)--iPhone failed to connect to Internet
    **10 characters (all numeric)--iPhone failed to connect to Internet
    *Set router to Mixed Wireless N/G/B Network Mode--iPhone failed to connect to Internet
    *Changed network radio band from Auto to Wide to Standard--iPhone failed to connect to Internet each time
    *Set router to Wireless G Only Network Mode--iPhone failed to connect to Internet
    *Changed Router IP address from 198.168.2.1 to 198.168.1.1 (LinkSys default)--iPhone failed to connect to Internet
    3. Microsoft router MN-500:
    Tried this old router (the one I used before purchasing the LinkSys). It is an old (circa 2002) Wireless B base station with WEP Security. The iPhone was never able to connect to the Internet using various settings, many of which were duplicates of the LinkSys tests above.
    On both routers my wife's Dell laptop and my HP printer connect without incident, using the same network/security settings.
    I have always been able to connect to various unsecured WiFi networks; I have never been able to connect to a secure WiFi network (although the only one I've really tried has been my own).
    I am at a loss as to what to do next. Any suggestions?

    SUCCESS!!!!!
    I visited my brother-in-law yesterday and attempted to connect with his secure network. By sheer luck, he is using the exact same model LinkSys router. My iPhone connected first time--so the iPhone was eliminated as a source of the problem.
    I didn't do a lot of troubleshooting at his house, but I did notice that his network was set for both dynamic DHCP and dynamic DNS. I know that either or both of Windstream (my ISP) and my broadband modem requires a pair of static DNS addresses.
    Sure enough, delving real deep into Windstream's support site, I discovered a LinkSys router DNS help page, specifying how to set static DNS addresses in LinkSys routers. I then accessed my router, enterd the known static addresses, saved the router settings, then rebooted the iPhone and connected to the network.
    SUCCESS!!!
    Thanks to Jane, who suggested it was an ISP issue, Jason, and all at Apple support. dumonj, I'll email you directly. Try this suggestion and see if it helps.

  • I upgraded my iphone os to 4.01 and i have not been able to synce to my computer. The erros message I get says the Iphone connected is not recognised what can i do to solve this problem.

    i upgraded my iphone os to 4.01 and i have not been able to sync to my computer. The error message I get says the Iphone connected is not recognised what can i do to solve this problem.

    Did you try to connect in recovery mode? iOS: Unable to update or restore
    Also check here: iOS: Device not recognized in iTunes for Windows
    And make sure your security software is set up right: iTunes for Windows: Troubleshooting security software issues

Maybe you are looking for

  • Running a Batch File using Auto Scheduler in HFM?

    Hi, Can we execute a batch file or run a macro or execute a VB script using the auto scheduler in Task Automation in HFM?? Abhishek Edited by: user10378700 on Sep 30, 2008 7:18 AM

  • Applescript apps in mavericks:  tell application  not working

    Since upgrading to Mavericks applescript apps can not do a "tell  application xxx"  if "xxx" is not manually started. Once they are started manually ie NOT during login the communication works again.  Is this a new security issue in 10.9?

  • QM Module

    Hi, Can any one tell me the step by step process used in QM for GR for Production Inspection type (04) and about QE51n t-code Like how to create Inspection lots,Material charecteristics , Inspection plan etc. Please help me in understanding the proce

  • Missing OS

    Upgrading computer to use Radeon X800 xl graphics card which causes raid 0 boot to fail and reports Missing OS.  Machine works great when card is removed.  Tried disabling onboard graphics in bios etc (with no improvement).   Suspect it is probably a

  • Saldos

    Hello I have a infocube with movements of 0TRCM_C01 liquidity position, and I have an ODS to upload opening balances once, the idea is that you can have in the report beginning balance, inflows and outflows of liquidity positions and balance end, but