Iphone connect with xbox 360

is there an app or a way to sync my iphone 3g with my 360 so I can stream music to my xbox to use in-game?

thought id ask ive looked all over for a solution on this. thanks

Similar Messages

  • Connecting with Xbox 360

    is there a reason iPhones won't connect with Xbox 360's like iPods did?

    Because even though it plays mp3 and has ipod capabilites...it's a phone! Were you able to connect your previous cell phone to your Xbox?
    Message was edited by: iphonechik

  • WRT54G wont connect with xbox 360

    i had my main computer hooked up to the wrt54g with a cable and had a laptop on the wireless and the xbox hooked up on a cable also. im selling the main computer and using just the laptop and now the xbox wont connect with anything. its driving me insane. at one point i had it but the xbox lost it again and has not worked at all.
    do i have to have the laptop hooked up to the wrt54g for the xbox to work? when the laptop is hooked to the cable it works and when i disconnect it stops working yet i could run my old pc and this laptop wireless and xbox still worked.
    i uninstalled the linksys advisor program and reinstalled and finally said screw it and deleted it and now the laptop connects finally but still no xbox.

    Do the following settings on your Router for X-Box to connect...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3) Click on set-up and change the MTU Size to 1452 and click Save Settings...Click on the Status tab and take note of DNS1 and DNS2 Addresses...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
    IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    5) Also assign the DNS Addresses on the Xbox
    Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

  • Airport extreme connecting with xbox 360 wireless adapter problems...help!!

    Has anyone linked their xbox 360 wireless adapter to an Airport Extreme? I need help! Neither Apple nor Microsoft knew how to link the two devices. If anyone has successfully been able to make this work, your help will be much appreciated. Thanks guys

    Yes - Mine works no problem. I have found that I have to unplug the Xbox360 wireless adaptor and plug it back in occasionally (if the green light is on everything is fine). Are you using the correct WPA Key?

  • Sharing Connection with XBOX 360.

    Here's what I want to do: Get xbox live working without buying a wireless adapter.
    Here's how I'm connected: My laptop is connected wirelessly through Airport. I have my xBox plugged into my laptop. After I plugged in the cable to my laptop, here's what I did:
    Went to system pref. > sharing. Share my connection from: Airport to computer using Built in Ethernet. Then I 'started' this sharing. When I went to check my xbox network settings, the IP address failed.
    What am I doing wrong, here? I searched the forums for the answer, and I figured that was all I had to do, but apparently not? What else should I do to get my xbox to receive internet / an IP address?
    Macbook   Mac OS X (10.4.8)  

    Hi
    It requires manual setup, for some reason OS X can't provide the XBOX an IP automatically.
    Setup Mac OS X Ethernet to a manual address i.e. 10.0.0.1. Set the Subnet Mask to 255.255.255.0. Leave the Gateway / Router, DNS, ... empty
    Setup the XBOX manually. Go to the Dashboard and move the the System tab-->Network Settings-->Edit Settings. Make the IP manual i.e. 10.0.0.2, Subnet 255.255.255.0, and the Gateway / Router 10.0.0.1. For DNS settings, most use the router's IP address, i.e. 192.168.2.1, but you can also use your ISP's DNS if you can find out what it is.
    Now, make sure Internet Sharing is started and setup to share your Airport connection to Ethernet.
    NOTE: You can find your router's IP by going to the TCP/IP tab of the Airport network settings.

  • Can I use the mini displayport to vga adaptor with the xbox vga cable to connect my xbox 360 to my macbook pro?

    I'm trying to find a way to connect my xbox 360 to my mackbook pro. I've searched the internet and found that I can use a eagle eye device but, its to expensive. So after looking at the xbox website, I found a vga adaptor for my xbox and an vga to mini displayport and I was wondering if this would work.

    The minidisplay port is output only. It's not going to show anything from your xbox.

  • How do I connect my Xbox 360 to my iMac

    I want to use my imac as a TV so i want to know how to connect the xbox 360 to my imac.
    Thank you for your support

    What iMac model do you have ?
    The 2011 ThunderBolt iMacs only work with other ThunderBolt Macs Thunderbolt 10.6 Help: Using another Mac as an external display
    For the 2009 and 2010 27" iMacs with Mini DisplayPort you would need something like the Kanex XD http://www.kanexlive.com/xd
    The Kanex XD is not compatible with ThunderBolt iMacs.
    Stefan

  • I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

    I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Is there a way to connect an Xbox 360 to an HP TouchSmart 520-1030?

    I have had this HP TouchSmart for well over a 2 years. This one question came to mind. Can you hook an Xbox 360 to an HP TouchSmart 520-1030? I have looked and Looked and found nothing helpful on the web.
    Specs are:  HP TouchSmart 520-1030
                          Intel Core i3-2120
                           4 GB's Of ram
                            No HDMI
    This question was solved.
    View Solution.

    Hello ScreenNameHere,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are looking to connect your Xbox 360 to your computer. First if you do not mind what is it that you are trying to do? Are you trying to use the TouchSmart as a monitor to play on or are you trying to use the internet access on the computer? As well, I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Unsure about connecting my Xbox 360 to soundcard

    I have searched this forum and looked at the stickies to determine if this is possible before posting but am a little confused so I decided to ask for clarification...
    I have a Sound Blaster X-Fi XtremeGamer Fatalty Professional Series installed in my PC
    I am considering purchasing the Sound Blaster Digital I/O module
    Is it possible to get 5. surround from my PC speakers if I connect my Xbox 360 to this setup using the Xbox 360 VGA HD AV Cable?
    Are there any downsides to doing so? Sound lag, skips, etc?

    I don't really know.. I got a Auzentech Prelude with SPDIF (supporting optical) input and output and even after Dolby Li've or DTS is activated on my system I get no sound whatsoever if I activate Dolby Digital on my Xbox360?
    Is it supposed to be like that? No sound when running Dolby Digital through a optical cable to my Auzentech Prelude?
    Dolby Stereo works, but then again I guess it wont really utilize my 7. speaker setup at all?
    Or does the sound card upmix to 7. or something, even when running Dolby Stereo on the Xbox360?
    No sound at all if I select Dolby Digital or that Dolby Digital WMA thing.. I thought Auzentech Prelude supported both Dolby Digital and that WMA thing?
    At least the SPDIF / Optical output does?

  • Hi been trying to  connect my xbox 360 online  and i am h...

     Hi been trying to  connect my xbox 360 online  and i am having major problems  my router is a WRT54GS v.6 i have the newest firmware also i also use a  linksys  wireless adapter for my pc  i am connecting my 360 to my pc and doing internet connection sharing  i can get a ip address this way but not a dns  if i have ics off i do not get a ip address i have tried everything  opening ports on my  router for the 360 and still nothen  i am about to  break my router and get a differnt one. me need helps.

    Yes, you have the ports connected backwards.
    The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
    The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
    See Apple's article AirPort Base Station: About the WAN and LAN Ports
    What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart.

  • Trying to connect an XBOX 360 to my airport base station via  ethernet cabl

    Hello,
    I have the older snow airport base station and was trying to connect my xbox 360 to it via an ethernet port. There are only 2 ethernet ports on the snow base station. one is being used by the cable coming from my dsl modem. the other free port i tried plugging into my xbox 360 to no avail. the xbox cant get an ip address. the open ethernet port on the base station is labeled with the circle logo. the one being used by my dsl modem has the two outer pointing arrows. I turned off the airport to my macbook and tried to connect my macbook to that port my xbox was in and it would not connect to the net either. Is it possible, i have the ports backwards. my wireless internet for all 3 mac computers works fine. Any help would be greatly appreciated!!!!
    Thanks!!!
    Vinny

    Yes, you have the ports connected backwards.
    The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
    The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
    See Apple's article AirPort Base Station: About the WAN and LAN Ports
    What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart.

  • No ip with wrt54gl with Xbox 360

    I'm stumpped. Brand new, version 1.1 wrt54gl.. replaced my old dlink one which worked fine for my 360 wrt54gl will not give my 360 a ip address. everything else on the router works fine. this is all wired. tried statically assigning one.. no go dmz.. -- no go. checked wires.. tried different ones... everything else gets an ip. tried turning firewall off.. UPNP off and on.. plug back my dlink.. works fine.. can connect to xbox live and play. i hate to return this, but any ideas? is this just not compatible with xbox 360? please help!. -Bmac6996

    Try this link to configure the X-BOX .....

  • Connecting my xbox 360 (elite) to my macbook pro?

    I recently got a Macbook pro for christmas, and was wondering if there was anyway that I could connect my xbox 360 elite to it. I want to use the my macbook screen as a screen for my 360, at least until I can afford a new TV (roommate knocked my 32" samsung off its stand and broke it christmas day...).
    I heard there is a VGA coord from microsoft that connects from a vga port to the back of the xbox, and i have the DVI to VGA adapter for the mac already. Was just making sure this works before I spend the $50.
    Thanks!

    Broschati,
    No, this won't work. The DVI port on your Macbook Pro is for video out. The Macbook Pro's display is connected directly to the GPU, and there is no way to input video to it.
    Scott

  • I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    RESET YOUR ROUTER
    No. Reset your router.

Maybe you are looking for