Iphone connectivity with car

I just upgraded my Iphone 3Gs with the ios 5 software upgrade. My phone is synced with the bluetooth in my car. Since the upgrade no sound comes through. What's wrong?

I dont have a problem with my bluetooth at all - once paired, it works like a champ.  My issue is the usb connection., . .
I have the 2011 Altima 2.5 SL Coupe with Nav / iPhone 4, iOS 5.0.1
When I leave my iPhone plugged in - say I run into a "stop & rob" for a minute, when I come out, the song will continue to play for 1 second and then stop. The only way I can get it to restart is to unplug the phone and plug it back in.
If I plug in my phone before I start the car, the same thing happens.
If I plug in my phone before it connects via Bluetooth, the same thing happens.
The only way I can get the iPhone to work is if I wait a good 10 - 15 seconds after I start the car. I am usually rolling down the road by then.
I know it is not a Nissan problem because I used my son's old iPod (30gb) and it works great (except it does not pause the music when I turn off the car)

Similar Messages

  • Bluethooth  connects with car bluetooth but no sound. This problem started after up dating to IOS 8.0.2. Any suggestion to fix the problem?

    iPhone: 5s,
    Problem started after IOS 8 up date.
    Problem: Bluetooth connection with car indicated: connected.
                   Incoming call: no sound (caller's voice) from car speaker.
                   Out going call: no ring sound through speaker.
                  At random shows calling but can not hangup & no ring sound.
    Car: Infiniti G 37    2009.

    I uploaded ios 8.0.2 on my iPhone 6 128 GB today 9-29-14 due to problems with Bluetooth talking to my ReSound Linx hearing aids to hopefully fix the problem. It sounds like the Bluetooth looses connection to the hearing aids and turns them off for about 1 1/2 minutes, then they come back on and I can hear again. I understand there are problems with Bluetooth and cars using the phone. I believe this Bluetooth problem is causing my hearing aid problem as my hearing aids connect to the iPhone via Bluetooth and the ReSound Smart App. I tried the reset fix, Settings>General>Reset>Reset All Settings as some have suggested but that did not resolve this issue either. I can't believe Apple is not talking about this ios 8.0.2 Bluetooth problem. This affects my everyday life in that I cannot hear when the Bluetooth drops.Try working with your hearing dropping every few minutes! If Apple wants in the Health field, I suggest they take their QA a little bit more serious than they are at present. Whomever was responsible for testing ios 8, 8.0.1 & 8.0.2 should be fired! This is causing more trouble than anyone can imagine. I understand the car - Bluetooth problem but think about the fact that if every time the Bluetooth drops, you can't hear.My job could be in jeopardy. I posted the problem to Apple Support and they will not even have the decency to respond with even a "we are sorry." How long do I have to go without being able to hear before Apple responds??????

  • I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    RESET YOUR ROUTER
    No. Reset your router.

  • HT204387 Hi I have a iphone4, and I bought harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection just stops.

    Hi, I have a iphone4, and bought a pair of Harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection stops.
    Can you please advise me on the subject
    Regards
    Izak

    This previous discussion discusses the same if not similar problem.
    https://discussions.apple.com/message/6750990#6750990

  • IPhone with iOS 7.1.2 cannot connect with car system

    Hi,
    I am using iPhone 4s with iOS 7.1.2 . I used to connect it with my car (fiat bravo, with blue&me system) and it has worked well, but it was still on iOS 7.1.1. Now it doesn't want to connect with the car, phone sees the car, but cannot connect with it. How can I solve this?

    Hello, Brunon_Wayward. 
    Thank you for visiting Apple Support Communities.
    Sometimes when an iOS update is released there is a compatibility lag with certain features that requires an update to the vehicle.  I would first check with your vehicle manufacture for any firmware updates.  However, here is an article that has some helpful troubleshooting steps regarding car stereo connections and an iOS device.
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    Cheers,
    Jason H.

  • Anyone else lose bluetooth connection with car radio since updating to IOS 6?

    I've lost consistent connection between my iPhone 4S and car radio (Kenwood) ever since I upgraded to IOS 6.  This is apparantly happening to lots of people. I use this bluetooth for hands-free calling on my phone so I'm hoping Apple will come out with IOS 6.1 soon to address this software patch.  Others experiencing this with their phones and car stereo systems?

    I'm having probems as well.  I can make calls and play music but I can only change songs on my iPhone 4S but not with the controls on the car.  I was able to do this before the upgrade.

  • N95 Bluetooth connection with car

    I drive an AUDI A6. Before I got my N95 I had a Sony/Ericsson i800. When I connected this phone with my car (Bluetooth), everything can be done from the car environment such as lookin for phonebook entries, selection of entries, dialing etc.
    With my N95 I can connect with my car and I can use the hands-free speeking system ... but only this! I can't read any phonebook entry, calling list etc.
    Is there any trick to open the phone directory for use in bluetooth mode?
    Best regards and thanks in advance.
    Sunni

    Having just bought a new Audi A6 Le mans 3.0tdi quattro Avant - I was keen to find a solution to this bluetoth/phonebook problem. I too have the Nokia N95 and can confirm that the above link works 100%. Firstly you need to have Nokia PC Suite installed on you PC & phone .. then download the application and save to your pc. With your phone now connected to your pc.. download the saved application to the phone... [ make sure bluetooth is off and not paired to your car ]
    Once installed on your phone - go to your car & connect/pair via bluetooth.... go to applications and run the application. It took a couple of minutes "processing " .... then switches to " transferring " ... again a minute or so.... Job Done.. My phone book is now integrated with the car and the MMI.
    Thanks for the above link. http://europe.nokia.com/A4143881
    It's the 2nd one down.....ie
    Nokia 810 Contact Download Application for Nokia S60 3rd edition devices Download now
    Nokia_810_Contacts_Download_S60_3rd.sis
    103.80 KB | English
    This contact download application enables you to download the contacts from the following Nokia phones to your Nokia 810 Car Phone via Bluetooth technology: Nokia E50, E60, E61, E61i, E62, E70, E90 Communicator, N71, N73, N77, N75, N76, N80, N91, N91 8GB, N92, N93, N95, 3250, 5500 Sport, 5700 XpressMusic, and 6290.Message Edited by audinut on 16-Oct-200703:19 PM

  • Iphoto starts when iphone connected with usb to Macbook

    After I upgraded to Yoesmite, I have a problem with Iphoto and Iphone. Iphoto starts whenever my Iphone is connected with USB to my MacbookPro.
    I often use USB connection so that my Iphone is charged while working outside my home. So it is quite annoying that Iphoto starts up everey time I connect mye Iphone with USB. I want to work and is not interested in Iphoto to clutter up my work and memory usage.
    What can I do to prevent Iphoto from loading.

    Yes all you have to do is open iPhoto on Macbook & select iPhoto Menu Preferences>Connecting Camera opens: "select" NO Application.
    Now if you want to send photos from your iPhone & you have iCloud-photos sync turned off, you'll have to open iPhotos & re-select iPhotos
    in Preferences again. 

  • IPOD Touch/iPHONE Connection with Linksys WRT160N V2

    Been trying to connect to my wireless modem with the new iPOD touch and iPhone at home but will not recognize my pwd.  Went to apple website for setup and did everything per instruction to join network with failed result.  However, my iPhone works fine with my 3G network cell phone provider.   I have a WRT160N V2 router connected off an ARIS comcast cable modem. 
    Anyone had this issue?  How did you resolve this?
    Please help....
    Thanks.
    ailao

    I'm using the same router as yours and my iPhone connects perfectly fine.
    All I did was:
    1. Change the SSID of the router from "linksys" to a different name.
    2. Changed the channel.
    3. Configured WPA2 wireless security.
    4. On the iPhone I just typed in the password (which is the WPA2 key) and it's connected.
    If you need more detailed steps on how to configure your wireless network, click here

  • IPhone connection with B1i Server through internet

    Dear All,
    iPhone is successfully connected with my B1i server through intranet (wifi connection).
    But When i am trying to connect my B1i server through internet, I am getting the following issue.
    I am getting an error as follows when i try to browse the tomcat homepage in IE
    XCL198 HTTP-access currently not allowed from remote clients, as B1iP runs in local-mode or safe-mode.
    I followed the solution given in B1iC troubleshooting Guide.
    I am using SAP 8.81 patch level 6.
    Maintenance->CFG Runtime parameters as
    B1i Http port :8080
    B1i Https port : 8443
    B1i Server : My server ip
    Please help me to resolve this problem.

    Ken, George, Dear all,
    in given context of problems running the mobile solution, please do NOT change B1i server Xcellerator properties at all.
    Quite frequently there are ideas to change the default settings of WebDAV and remote settings of B1i server. This is simply a waste of time and definitely not required for troubleshooting or making the mobile
    solution working.
    Simply check the documentation 'Administrator's Guide for the Integration Component' for the purpose, the default settings, and further info about these properties you instruct to change:
    a) About xcl.http.localOnly
    Administrative Web access is limited to the local machine only. After installation, it is possible to manually allow access by remote machines by changing the particular setting in the operating system configuration file
    (Xcellerator.cfg).
    For additional documentation, choose Start → All Programs → Integration solution for SAP Business One → Integration framework, and then choose Help → Ref 04 – Operations, chapter 6.2.
    b) About WebDAV-based access
    WebDAV-based access to BizStore content is disabled. SAP does not recommend enabling this kind of access for productive systems, as this is typically needed for development systems only.
    For additional documentation, choose Start → All Programs → Integration solution for SAP Business One → Integration framework, then go to Help → Ref 01 – Dev Environment, chapter 3.
    For checking the connectivity from mobile to server / excluding network issues, B1iP can definitely run in local mode. When calling the server from mobile, B1iP would give you a fully sufficient, proper
    response:
    SAP B1iP detected an error: Emitted HTTP-Code 403 - Forbidden
    Internal Reason XCL198 HTTP-access currently not allowed from remote clients, as B1iP runs in local-mode or safe-mode.
    - This is exactely the alleged 'error', Tamizharasi mentioned at the beginning. Behind the internet connection issue from iPhone to his B1i server (which was unfortunately not described at all) must have been a quite different root cause - changing xcellerator properties is unfortunately a wrong recommendation here in order to clear such general iPhone issue.
    I am concerned here from security side, such settings may not be amended lightly, and lead the problem-solving in the wrong direction - beside your additional efforts.
    We do recommend to keep the default values and undo such configuration changes again, if not needed.
    For troubleshooting the mobile solution please check SAP note 1602674.
    Best regards, peter

  • Iphone connect with xbox 360

    is there an app or a way to sync my iphone 3g with my 360 so I can stream music to my xbox to use in-game?

    thought id ask ive looked all over for a solution on this. thanks

  • IPhone connectivity with a system

    Please, how do I share my Apple iPhone4 internet connection with a computer........Thank you

    http://support.apple.com/kb/HT4517

  • Iphone 4 bluetooth connection with car

    My iphone4 (iOS 4.2.8) pairs with my 2008 toyota Sienna bluetooth; however, it continues to fail and drops connection after a day. It shows it is paired, but I  have to continue to re-pair it to actually get it to work. My ev3 LG phone worked great, so it's not an issue with my car. Any fixes? Is this an iOS problem. I've hear that from the Toyota dealer. They seem hear the issue frequently with iphone users.

    It's not just the bluetooth car radio. Lots of problems with bluetooth stereo overall.. My s305 motorola headphones worked fine until I upgraded recently to 4.3.1 now and it's pretty much unuseable. Practically impossible to get to connect, pair, unpair, reset etc.. Sometimes it will connect but then it pretty much disconnects again after a minute or so. Used to work for me most of the time but it's never been great; now it's abismal.
    Check this thread out for lots of others with the same problem...
    http://reviews.cnet.com/8301-195127-20008764-233.html?refresh=1301768822360&tag=rbcontent;overviewHeadProfile
    Message was edited by: unclej2k

  • Iphone 3gs with ios5 update. bluetooth connection with car problem.

    I updated my iphone 3GS to IOS5. After the update, the bluetooth (handsfree) connection to my car (Lexus RX350) does not work anymore. I can connect  any other cell phone bluetooth to my car. Only iphone after the IOS5 update is failing. Any suggestions (I reset many times)?

    Some people havent had one problem when updating to iOS4, others have been over run with problems. I myself have lost virtually all sound from my loud speaker so calls, txt messages and ipod are virtually unheard now..
    Went to my local Genius bar in Liverpool today, complete waste of time, the guy restored it like I hadnt already done that a 100 times, then said oh yeah it is qeit not heard of that one before, to get a new one will cost you £139!!
    Yeah right mate, not payin that as its not my fault! did ask him if he ever looks on the Apple forum about faults people are having, and I got a blank look. Told him a thread with tens of thousands people all having the same problem with low sound from the speakers and calls being ended in mid conversation since updating to OS4 seems a bit strange then... another blank look!
    Ive lost all faith with apple as a company now and will not be upgrading to a iPhone 4 anytime soon or any apple product, no one seems interested in helping but quick enough to take your money, thats my opinion anyway..
    Gaz

  • Does it look like iOS 7 upgrade caused original iPhone cords to lose connectivity with car USB port?  Mine broke.

    Really frustrating experience given how much we rely on our phones.

    If I plug it into a wall outlet, the phone complaints about "Incompatible accessory", but begins charging.  The problem is clearly at the software level, as the charge rate is noticeably slower. 

Maybe you are looking for