Iphone connects to router, won't connect to internet

Searching back through the forums, there seem to be some kinda similar problems, and individually anecdotal solutions to them, but I wanted to see if anyone is experiencing something similar to my problem and/or has a definitive solution.
I can connect to my wifi router (d-link dir-625) no problem. iphone shows a strong connection and I can even access the router's configuration and settings site in safari.
I cannot, however, access anything that requires an internet connection (web pages, weather, etc.) when connected to the router. Safari just hangs while trying to access any web page and eventually gives an "sfari could not open the page because the server stopped responding" message.
This has happened with 2.0 and 2.0.1 and 2.0.2. Didn't have this problem with the 1.whatevers. I've repeatedly tried to renew the lease, forget the network, and tried multiple DNS options that people have mentioned. In fact, the closest answer anyone seems to have had was setting the DNS the same as the router's http address. My phone connects to the router with the dns already identical to the http address (192.168.0.1). And like I said, I can access the router's settings page, change whatever I want on the router with my iphone. But can't ever seem to get the internet to work.
Any network gurus have any suggestions?

I have both an iPhone 3G and an iPod Touch. Both have had this problem with 2.0.0, 2.0.1, and 2.0.2. I didn't have the 3G prior to 2.0, but I had the iPod Touch, and the touch connected to my wifi setup fine then.
I experience the problem regardless of whether my router is set to WPA, WEP, or no security. (Router is a Linksys WRT54G.)
Here's a very specific reproduction case. I go to settings, Wi-Fi, and choose my network. After entering the password successfully, I click the blue arrow and see that DHCP has correctly found an IP address for the device. I can even ping to the device from my other computers on the network. Interestingly, the ping times are erratic and tend to be long--up to half a second but as low as 80ms (as opposed to ~1 or 2ms pinging the router itself from a computer). Now I go to Safari on the device and visit any URL--say www.apple.com. I see the blue wifi waves on the status bar. The spinner is spinning. The address bar shows about 5% blue as if the page was beginning to load. But then for about 1 minute the bar doesn't move, and finally I get an error: "Safari could not open the page because the server stopped responding." All applications that use the net behave the same way. I am able to access my router's setup page directly. Interestingly, if I try to access an external site numerically--like http://17.149.160.10 for Apple, the blue bar creeps to about the 10% mark before freezing and progressing no farther.
There's definitely something funny going on with the new software's wireless access. It may have to do with the router, but it doesn't sound specific to the router.

Similar Messages

  • Connect to internet, not via 3G, but via bluetooth network connection

    I am considering buying this iphone,
    and there are many options I can use to connect internet.
    so can an iphone connect to internet, neither via 3G nor via wi-fi, but via bluetooth network connection?

    The iPhone does not support tethering - at the present time anyway, which means using the iPhone as a modem for internet access with a computer, and the same in reverse - using a computer's internet connection to connect to the internet with the iPhone.

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • Wi-fi bridge between two routers TP-LINK WR841ND (WDS).  HP 1536 dnf MFP connect to one of this routers (copper).  My Ipad or Iphone can't find HP 1536 dnf MFP (using Eprint). Ipad and iphone connect   to router across WiFi.

    Hello.
    I have wi-fi bridge between two routers TP-LINK WR841ND.
    The name of this technology - WDS.
    HP Laser JET 1536 dnf MFP connect to one of this routers (copper).
    Second device (my NETBOOK) connect to second router (WiFi).
    I have good communication between NETBOOK and HP Laser JET 1536 dnf MFP via WiFI-bridge.
    In usual case NETBOOK can find (and can Ping) network printer and make a print some files.
    But my Ipad or Iphone can't find HP Laser JET 1536 dnf MFP (using Eprint). Ipad and iphone connect
    to router across WiFi.
    Please, help!

    Are you using the ePrint Mobile App, the ePrint Printer Control App, or just trying to send an email to the printer's ePrint email address?
    Does AirPrint work?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    RESET YOUR ROUTER
    No. Reset your router.

  • IPhone 5s can connect to wireless WIFI router but can not access internet.

    iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
    TIA
    Rich

    You IT person should be able to sort this out.  But, they seems to be too busy or disinterested to do this.  Suggest you provide the it person with an iPhone to get interested.
    Any could be lots of things.
    The best you can do is to get access to the admin setup for networking on a pc?  The internet settings are all the same.  Only what names the manufactures change from OS to OS. Check and compare parameters.
    Phone works to internet at home, I assume?

  • I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to wifi at all

    I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to the wifi at all I'm tapping the wifi and nothing is happening?

    See this. http://support.apple.com/kb/ts1559

  • Why won't my iPhone connect to the Internet? It will goes days with no connection, then suddenly have a connection for a while. I am on the Sprint network.

    Why won't my iPhone connect to the Internet? It will goes days with no connection, then suddenly have a connection for a while. I am on the Sprint network.

    Have you contacted Sprint?  See if they can resolve your issue, if you can't get 3G.

  • I've lost my iPod and I'm trying to find it on the Find iPhone app, my router says its connected to my iPod but iCloud says 'No Internet'. What should I do?

    I've lost my iPod and I'm trying to find it on the Find iPhone app, my router says its connected to my iPod but iCloud says 'No Internet'. What should I do? I've tried searching for it everywhere but I can't see it.

    You can't track it if:
    1. It' not turned on and connected to internet
    2. It's wiped

  • Why won't my Iphone connect to my Macbook Pro?!

    The thing is, I have transfered music for many time over the past year. My Iphone connected to my Macbook and everything, it loaded up iPhoto, iTunes etc. But now when I tried to connect my Iphone to transfer some new music it wouldn't even connect?!?! First I thought that it was the cable, but it wasn't because I can load my phone normally otherwise. Then I checked my USB-ports, but they worked just fine! After that I started to search everywhere for the same problem but all I could find was ''My iphone won't connect to iTunes'' and that was not the problem I had... I restarted both my devices and updated my iTunes on the computer, still nothing works... And now I'm sitting here looking for an solution I probably won't find... So please help me with this problem, I am getting really close to just throw the computer in the wall or something!

    It is not uncommon.. !!
    Go back in and setup wireless again.. let me strongly recommend you use a real utility.. not that toy in ML. See below.
    Change the wireless name/s to SMB standard .. short, no spaces. pure alphanumeric. I recommend fixing the 5ghz to a different name at least whilst you have issues.
    Now lock the wireless channels for 2.4ghz.. try 1, 6, 11 in turn. Keep whichever gives the best speed and range in your environment.
    On the screen shots above I still haven't finished the setup.. wireless security should be set to WPA2 Personal.. and use a pure alphanumeric key.. mix of upper and lower case and numerals.. 8-12 characters is plenty for most.. if you are paranoid add a few more.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • New iPhone 4s won't connect to internet

    New iPhone 4s won't connect to internet beyond my home wi fi. How can I correct this? I need internet where I go.

    I've got exactly the same problem.
    Upgraded to iOS7 all was fine. 
    It then prompted me to upgrade to 7.0.2 and now my iPhone 4s won't connect to Internet anymore.
    There was also a carrier settings update that I accepted which could have broken things.
    I've tried different APN settings but it still won't connect for me :-(
    Tried a Reset Network Setting, and the problem is the same.

  • I upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet

    i upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet 

    I can use my iPhone only with wifi .
    I don't get any signal and I can not connect to
    The Internet without wifi.
    When I don't use my wifi from home I have lost all connection to the net
    My iPhone is on and working it does not shut down

  • Router won't connect to internet, computer shows 'limited or no connectivity' message

    Hi everyone, I could use some help. I have a Linksys WRT150N router that I bought a few years ago. It was working fine till about two days ago. I can't connect to the internet at all through the computer it's connected to or wirelessly on my laptop. The message 'limited or no connectivity' shows up on both computers. I tried resetting and unplugging the router several times, and I can't even access the router's settings using the IP address cause I need internet to do that. I know it's not my modem because when I connect it directly to the computer without the router, I can access the internet. So do I need a new router or is there something else I can do? Could my internet service provider have done something recenly so that it doesn't work with my router anymore? Please help, I seriously don't want to spend money on another router.

    Who is your Internet Service Provider ?
    If you are using cable connection then follow this link and if you are using DSL connection then follow this link.

  • How do i let my iphone connect to my computer wifi with usb ?

    As the title stated,
    How do i let my iphone connect to my computer wifi with USB ?
    The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
    If i don't do this i would have to keep on running out & in to my room & my living room.
    My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
    I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
    Regards,

    I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

Maybe you are looking for

  • 1x80070001

    I got error (1x80070001) during the installation Windows Vista or Windows 7. I format "C" drive and try to install Windows Vista but on 4%, I got said error and cancel copy. What I do? Is this partition problem (FAT / NTFS) or other problem. Please e

  • G5 HD output to a Toshiba Projector

    Hi I wonder if you could help me. I have a dual 1.8 G5, 2Gb Ram, running OS 10.4.6, with a Radeon 9800 Pro with 128MB of Vram. It has both VGA and DVI connections. I recently bought a Toshiba TLP-ET1 LCD Projector, which has VGA and Component video c

  • Synchronous Storage Replication Process

    Hi, I have a question regarding storage replication for synchronous mode. If I describe the process in detail having twin Data Centers called DC-A and DC-B we have: 1- The server in DC-A writes to the DC-A disk. 2-  Before the server in DC-A receives

  • Parallel insert blocked on business table

    Hi guru, i've got this problem: parallel insert blocked on the same table. This event is periodic and the name table change of time in time. Version SAP is R/3 Enterprise 4.7 witn DB ORACLE 9.2.0.8 on SO AIX 5.3 ( ML 10) Thank You for yuor support MC

  • 3D Plot Color Ramp - Colors to Values

    Hi all, The Color Ramp for 3D plots only displays 3 values; not all values for every displayed color is shown (see below). The actual values associated with each color is available via the 3D Plot Properties dialog (during edit). How can I access the