IPhone continuity - silent switch no effect on iPad when receiving calls

Hi Apple,
I love continuity, especially for calls.
would be great to transfer the status of the silent switch on iphone to ipad/mac -> when iphone is on silent it also mutes ipad/mac, so when receiving calls the ipad/mac doesn't ring!
Or at least give the user to have an option in settings.
thanks for looking into this.
Oli

http://www.apple.com/feedback/

Similar Messages

  • Iphone 3gs silent switch problem  and volume rocker

    Hi so basicly my iphone 3gs silent switch is loose when switched on silent it moves a tiny bit and goes on ring etc and also the volume rocker the one to turn up is kinda pushed in but still works to make it work you have to push hard. Does anyone know how to fix? thanks! 

    Check  the tiny silver button on the left side of cell near the  top & switch it so u can't c  red dot

  • IPhone 3GS silent switch, help?!

    My iPhone 3GS silent switch seems to work fine. But when the iPhone is locked and you turn the switch from loud to silent, or the other way round, the screen doesn't wake up to tell you this has happened, whereas all the other iPhones that I've seen seem to wake up to tell you the setting has changed… don't know if there's something wrong with the phone internally or if this is a software problem. Thanks!

    If I were you I would bring it into an Apple store and have them take a look at it.
    Make sure you make a Genius appointment before you go in.

  • Iphone 3gs silent switch on/off

    my iphone 3gs silent switch goes between vibrate and loud when pressed on the front by the speaker? any way to fix this? thanks

    Check  the tiny silver button on the left side of cell near the  top & switch it so u can't c  red dot

  • IPHONE 3GS SILENT SWITCH TOTALLY DEAD, NO SILENT FUNCTION???

    My iPhone 3GS silent switch has been very tempermental recently, but as of last week, when I switch it onto silent, it does not do anything. No icon on the screen comes up, its just completely useless. Does anyone know what i could do to maybe bring it back? I dont want to take it apart as it could cause further problems... coule it be caused by dirt in the sliding area? I dont have any ideas. Any replies are very much appreciated!

    If I were you I would bring it into an Apple store and have them take a look at it.
    Make sure you make a Genius appointment before you go in.

  • Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?

    Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?
    During a two weeks process, little by little I notice my phoe doesn't ring when I get a phone call.  So Far I have missed 22 calls that I am aware of.  Moreover, the phone does not alert me when I get a text message.  Sometimes I receive notice the next day that I received a call or a text message. 

    Follow the basic troubleshooting steps outlined in the user guide... reset, restore from backup, restore as new.

  • My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • I can only send messages to other iPhones and I am not allowed to make or receive calls

    I can only send messages to other iPhones and I am not allowed to make or receive calls at all not even iphones.

    You must have a SIM card installed ( if applicable ) and have your iPhone activated to make calls or text mobile phones.

  • Why does my iPhone shows "restricted" on other people's phone when I call them?

    Why does my iPhone shows "restricted" on other people's phone when I call them?

    Lena the only previous e-mail message was on Tuesday Dec 30 which stated…..
    Lets get your Caller ID to work as it should! I will send you a private message so that we can better assist.
    This e-mail states  that another ‘private message’ presumably via e-mail would be sent/received but I haven’t received anything else from an e-mail perspective. Presumably it is just a matter of navigating through a low number of settings to get to the caller-id option.
    Thank you,
    Steve.
    Sent from Windows Mail

  • I need an application that will enable my ipad to receive calls, make calls , send sms and receive sms. line2 is not available in south africa

    i need an application that will enable my ipad to receive calls, make calls send sms and receive sms. line2 is not available in south africa

    Skype would be a possibility for phone calls, though I don't know if it's available in SA. Search the iTunes Store for "SMS" and you'll quickly see if there are any SMS apps you can try.
    Regards.

  • IPhone ring/silent switch doesn't work.

    Weird problem. My colleague has an iPhone 3G which worked fine for over a year. But recently it developed a problem, its ring/silent switch doesn't really do anything. Earlier it showed an image on the screen notifying the change of mode. But now nothing happens.
    The phone was not dropped and was not exposed to any shock as it is permanently kept on his desk, he never takes it anywhere (yes, even I find that weird ).
    What could be the problem? He's very worried. Can someone help please?

    hi there,
    hope your problem is sorted but if not you could  try the following tip i posted to a similar question:
    for anyone who's iphone buttons (hardware) are not working, there is something you could try w/out taking your phone apart.
    go to settings --> general--> accessibility-->turn on assistive touch
    this results in a small on screen touch activated version of your home button popping up on your screen - press it to see options such as : home. if you press it then select device, you will see further options such as mute. hope this helps.. would love to know how you go...
    good luck!

  • IPhone 3GS silent switch very tight! What to do?

    I need some advise!
    I bought the 16gb black 3GS at full price (Factory 86 week 30)
    and the screen had a ghosting effect (the kind you see on an older LCD screen with slow response times).
    I swapped that out with a new one, which seems fine... So I applied the invisible shield! After letting it dry for two days I turn it on, all is well.... BUT the silent switch is really tight! I have to use a lot of force to switch it to silent and back!
    What should I do? Exchange it again & lose the invisible shield? Or keep it and accept that nothing is perfect (it's better than being loose).
    I would really appreciate some feedback here!

    I had the same exact problem after installing the invisible shield and I think it's because some of the liquid from the invisible shield got in there. I just kept using it and to this day (3 weeks later) it's back to normal. just use it daily so it gets loose over time. Nothing to worry about

  • IPhone 3GS silent switch doesn't silence the device

    I recently dropped my iPhone 3GS from the desk in my bedroom. I checked to see if it worked fine, and it did. No scratches or nicks.
    After that, I found that the Silent switch does not work. I flip it down and receive no notification that the phone is on silent, no on-screen & vibrate notification. So, I tested it by calling my phone from the home phone - and my iPhone 3GS rang and vibrated.
    I checked the settings and I even did a reset. Should I do a full reset (Erase All Content and Settings option)?
    Thanks much.

    If the switch was damaged with the drop, doubtful that restoring your iPhone with iTunes will resolve the problem,
    No need to to erase all content and settings with the iPhone since doing so will require syncing your iPhone with iTunes afterwards, and is a secure erase which will take an hour or two.
    You can try restoring your iPhone with iTunes from your iPhone's backup - sync your iPhone with iTunes immediately before to update your iPhone's backup and any data that is kept synchronized. If no change after that, the next option is restoring your iPhone as a new iPhone or not from your iPhone's backup.

  • IPhone 4 silent switch crooked ( when partially moved ) and pretty easy to trigger

    Hi. I just bought my new iPhone 4 black .. Right out of the box... My iPhone 4 had the silent switch a little bit "loose" I think..  When I partially "touch" with my nail.. The silent switch looks "crooked" .. And it goes back to its initial position .. When I do the same thing.  And I don't know if it's OCD.. But my silent switch it's PRETTY easy to trigger.. Not to easy.. But I saw some iPhone 4's which has a very sturdy silent switch.. And they needs a lot of pressure to change between "silent and loud" .  What's your oppinion? . I don't want it to break in the future... what do you think? . I'm to OCD or it's a major problem?
    Sorry for my bad english.. btw

    stevenkps wrote:
    thx for replying... but it doesnt work... i turned the app on and made sure all vibrating stuff are on... then i tap ( or even smack ) the right hand corner ... its still not even vibrate once...
    You may have to try this several times. If it fails to work after several attempts then I'd return it for one that works properly. There's been several threads regarding this procedure that has been successful including me. However it may not work in your case and a return is the only option. In fact I did return mine for other reasons though and then repurchased again for my wife and I in late July with absolutely no problems.
    Good Luck!

  • IPhone 3GS Silent Switch

    I dropped my iPhone 3GS yesterday and the silent switch no longer works. I have had the iPhone for about 14 months now, so my warranty has expired. I don’t want to go paying ‘big money’ just for a silent switch.
    Are there any apps out there which allow the mute on/off to be controlled?
    Has anyone else had this issue? And fixed without apple support?
    Really missing this function. Can anyone help???

    No apps can do that. Google for iPhone repair in your area... there's likely one that can fix it.

Maybe you are looking for

  • I keep trying to put appson my phone they wont install from itunes. i have enough room they just wont go on my phone

    i have restored my phone and everything i have over 7gbs left and it wont let me put certain apps on my phone. i can download them thru itunes and they are on my account but they will not go to my phone. and when i try to download them directly to my

  • Query help required to link two fields

    Hi all, I have made an query as under : SELECT T2.Period, T0.dept, T0.empID, T0.firstName, T0.lastName, T1.U_ebasic, T1.U_ehra, T1.U_etrspt, T1.U_ecola, T1.U_emeins, T1.U_education, T1.U_grosssal,T1.U_totduc, T1.U_oadd, T1.U_netsal, T1.U_bank, T1.U_b

  • Amplitude is not changing on the receiver side

    I am trying to transmit square wave using USRP 2920. If I change the amplitude of square wave in Tx file from 1 to lets say 100. The Tx waveform shows that it is changed but on the receiver side there is no change in the amplitude. Can any body look

  • Syndicator:Restricting Number of records in a output file

    Is there any mechanism by which i could restrict the number of records syndicated to a single output file ?. Currently the only option seems to be output all records(matching certain criteria) or a single record to XML file/s.

  • PDF Transparency issue

    I'm using a filled area with transperancy set at 50% to give a go/no-go box in Didem Report.  When copying to the clipboard, this works as expected. However, when exporting to PDF, the filled area is opaque, and I cannot see my data. I have attached