[iPhone] CPU utilization

Hi all , do you know how to get the CPU utilization of the iphone through the code? Thanks very much.

I called Apple Support today and they instructed me to follow the same article.  Follow it closely (use the detailed steps).  It did work for me.
I did have a lot of trouble unistalling the bonjour service.  It did unistall without error, but the service and the directory and app and DLL where still left.  I could not delete the DLL, even after the restart.  I manually removed the service and rebooted again, still no luck.  I even ran a windows systool to look for open file handles to the DLL and found none...  So, I can't explain why I couldn't delete it.
Other than that, the instructions went smooth.  I simply ignored the bonjour issue, reinstalled, and my problems were solved.
Before unistalling, I would export my library (just in case).  Do this from File --> Library --> Export.  This may help you preserve you playlists if something goes south.
Also, I would backup all of my library in the MyDocument --> MyMusic --> iTunes Folder.
I didn't need either of the above, iTunes was able to read all of the original files and preferences when reinstalled.  But it's better safe than sorry.

Similar Messages

  • Swiping causes spikes in CPU utilization.

    Using app to monitor CPU on iPhone 5 and iPad mini. Swiping causes spikes in CPU utilization from 5% to 65% for every swipe. Heavy swiping causes processor to run near 100%. Seems abnormal.
    Reduce Motion turned on.
    IOS 7.1
    Anything to make this not run so high? Battery drain seems much faster with just general usage.

    Hey Apple. This is likely a major issue with battery drain. Constant CPU spikes will cause the CPU to heat which increases battery drain. Swiping should not peg the CPU. I suspect it has to do with how The screen is rendered to the user.somebody needs to look into this from Apple. This is been an issue for at least the last few iOS versions.

  • 3G High CPU utilization when waking

    Recently gave my iPhone 3G to my wife, restored it to a new phone, then synced it with her information, music, applications, etc. She previously had used an iPod touch, and basically was trying to upgrade her to an iPhone.
    The phone worked fine when I had it. I only had a short time with this specific phone as it was replaced under Apple Care about a week and a half before turning it over.
    Now it pretty consistently is unresponsive when trying to wake it. By bringing up the System Activity Monitor App as soon as possible after powering it up, and leaving that app active when putting it to sleep I can see that the CPU gets slammed for a while during initial startup and has a significant period of very high CPU when waking. At this point I believe the cause of the unresponsive behavior is that the CPU is maxed out doing something.
    I've compared the running processes to an iPhone 3Gs and they were identical except the 3G was missing the MobileMusicPlaye until I brought up the iPod on that phone.
    There are 2 things about the initial setup of this phone for my wife that are causing me some concern;
    1) When first connected to iTunes after the Factory Reset I was prompted to restore an older backup than the iPod Touch one I took right before the swap. I didn't realize it at the time and accepted that restore.
    2) I was prompted to upgrade and followed through with an upgrade to 3.1.2 after the Factory Reset even though the phone was at 3.1.2 before the swap.
    At this point I'm thinking about doing another Factory reset and set it up by sync only (no restore) but not looking forward to the time investment that will take.
    Any ideas on where the high CPU utilization is coming from on wake? Is that a reasonable theory that the high CPU is causing it to be unresponsive when first woken up.
    Any other insight from others that have been through this?

    I ended up restoring the 3G phone to Factory settings and then sync'ing the desired information / applications onto it (did not restore the previous backup). The behavior is improved but this phone does seem to get bogged down when waking (observing high CPU utilization when monitoring with System Activity Monitor and experiencing sluggish / jerky response to user actions with no applications or just Mail running). The periods of non-responsiveness are not as long or as severe at this point, but still noticeable.
    I'm at a loss since under the conditions I'm observing this there is nothing but Apple software running on the device (behavior is present with or without SAM showing me the CPU utilization). I'm a little suspicious that it might have something to do with re-establishing the WiFi connection, but it seems to continue for a bit after the WiFi icon appears in the status bar.
    I'm probably going to make a genius appointment to see if they have any other ideas.

  • BTServer causing high CPU utilization

    Just got a new MacBook Pro with OS X Lion and updated to 10.7.1. I've seen the BTServer process cause high CPU utilization twice now. One morning I also noticed that the fan was running loudly while the lid was closed and the computer was locked up; I had to force power it off. Anyone seeing similar issues? Doing a search for BTServer on Google or even here in the Apple Support Communities does not bring up anything related to Lion at all, only iPhone-related articles.

    yup, i had this problem too.  i have a new 2.2ghz macbook pro and while at a coffee shop, i noticed my battery draining very quickly, and a look at activity monitor showed that BTServer was running away with high-cpu utilization.    i killed off the process and didn't notice any loss of functionality. 
    not sure what it was supposed to do with so much freaking cpu cycles!!!
    is this for bluetooth? i dont even have bluetooth on.  im not happy about this having to be something i'd need to keep a eye on when i'm trying to maximize my battery life. 

  • High CPU utilization with JDesktopPane.OUTLINE_DRAG_MODE

    Hello there,
    since I updated from Java SDK 1.4.0 to 1.4.1_01 I recognized a problem with MDI Java applications using a JDesktopPane with JInternalFrames. When the drag mode of the internal frames is set to OUTLINE_DRAG_MODE, which should have a better performance than the LIVE_DRAG_MODE the cpu utilization goes nearly up to 100% an the drag of the frame is quite slow.
    Does anybody else experience this problem?
    (The problem exists in the application I develop and also in the IDE Netbeans, I use for development)
    I am not sure if this is the right place for my problem, so if there is a better one to post it to, please tell me.
    Thanks
    R�diger

    Hi,
    I've also noticed this. It happens on Windows 2000 with 1.4.1, but not with version 1.4.0. Have you found a solution yet?
    Martin

  • CUCM 8.6(2) - High CPU utilization - CCM process

    Hello,
    Process name ccm is peacking 91% of CPU utilization in one of Subscribers.
    On cluster there are 1 Pub, 2 Subs, and 2 TFTP.
    CCM service was already restart, and Subs reload, but problem remain.
    We have checked and removed association with phones not registered, but problem remain.
    Proc,PID,CPU,Status,SharedMem,Nice(Level)VmRSS,VMSize,VMData,ThreadCount,DataStackSize,PageFault
    ccm,32687,90,SLEEPING,87380,0,426792,605276,468544,47,418345,744
    VMware Installation:
            1 vCPU: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
            Disk 1: 80GB
            4096 Mbytes RAM
    admin:show process name ccm
      PID  PPID   TID %CPU S COMMAND
    32687     1 32687  0.0 S ccm
    32687     1 19549  0.0 S ccm
    32687     1 19570  0.0 S ccm
    32687     1 19639  0.0 S ccm
    32687     1 20057  0.0 S ccm
    32687     1 20331  0.0 S ccm
    32687     1 20332  0.0 S ccm
    32687     1 20333  0.0 S ccm
    32687     1 20354  0.0 S ccm
    32687     1 20360  0.0 S ccm
    32687     1 20361  0.0 S ccm
    32687     1 23336  0.0 S ccm
    32687     1 23337  0.0 S ccm
    32687     1 23338  0.0 S ccm
    32687     1 23339  1.0 S ccm
    32687     1 23340  0.1 S ccm
    32687     1 23341  0.2 S ccm
    32687     1 23342  0.0 S ccm
    32687     1 23349  0.0 S ccm
    32687     1 23988  0.0 S ccm
    32687     1 23989 21.6 S ccm
    32687     1 23990  0.7 S ccm
    32687     1 24013  0.0 S ccm
    32687     1 24043  0.0 R ccm
    32687     1 24044  0.0 S ccm
    32687     1 24045  0.0 S ccm
    32687     1 24046  0.0 S ccm
    32687     1 24047  0.0 S ccm
    32687     1 24048  0.7 R ccm
    32687     1 24049  0.2 S ccm
    32687     1 24050  0.1 R ccm
    32687     1 24051  0.0 S ccm
    32687     1 24052  0.0 S ccm
    32687     1 24053  0.0 S ccm
    32687     1 24054  0.0 S ccm
    32687     1 24091  0.0 S ccm
    32687     1 24092  0.0 S ccm
    32687     1 24093  0.0 S ccm
    32687     1 24181  0.0 S ccm
    32687     1 24182  0.0 S ccm
    32687     1 24192  0.0 S ccm
    32687     1 24277  0.1 S ccm
    32687     1 24278  0.0 S ccm
    32687     1 24279  0.0 S ccm
    32687     1 24280  0.0 S ccm
    32687     1 24281  0.0 S ccm
    32687     1 24282  0.0 S ccm
    admin:
    Are there any specific tests, or logs prior to isolate this issue?

    Hi,
    A few points:
    > Use one of the recommended OVA templates
    > Check if the spike is random or occurs at a specific time. If it occurs at a specific time it could be coinciding with something like DRS backup, CDR load, busy hours etc.
    > Minimum set of logs needed for one such high CPU spike instance are:
    Detailed ccm traces from all nodes
    RisDC Perfmon logs
    Proglogs
    Also, capture the output of the following:
    utils diagnose test
    utils core active list
    show process load
    HTH
    Manish

  • Can we control user request w.r.t Memory and CPU utilization in Oracle 10g

    Dear All,
    We are having Production with Oracle 10.2.0.4 (5 Node RAC, 32Gb RAM each) running on RHEL5.2 with 12000 Users. We have some schema say FIN, HRMS, SALES, REPORT and many dedicated users for those schemas. We need to control the user request against these schema with respect to Memory (or CPU utilization)
    Suppose users using FIN schema can use Maximum 40 % of Total Memory, HRMS schema can use Max 20%, SALES can use Max 20% and REPORT can use Max 20%.
    Is it possible to create any Service in Server side to handle this type of scenareo or any existing service which can be customised to fullfil this?
    Please suggest me.......
    Thanks,
    Tusar
    Edited by: gohappy on Jan 27, 2011 5:59 AM
    Edited by: gohappy on Jan 27, 2011 6:00 AM

    JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
    This means the session will continue to exist.
    It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
    'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
    by throwing memory and cpu at the problem.
    When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
    Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
    Paraphrasing William Jefferson Clinton: It's the application, stupid!
    Sybrand Bakker
    Senior Oracle DBA

  • Increase in CPU Utilization after migration from APEX 3.1.2 to APEX 3.2

    Has any noticed any increase in CPU Utilization after migrating from APEX 3.1.2 to APEX 3.2?
    Thanks,
    Mark

    Hi Mark,
    Take a look at some of the usage reports within APEX (sessions, page views etc) to get an overall feel for where the time is being consumed.
    You'll also find it useful if you can run a statspack report (or AWR, ASH etc) during a busy period to be able to drill down into where that CPU is being spent.
    There's no magic answers here unfortunately, you need to track it down to where the time is being spent before working back up to find out where best to tune it.
    John.
    Blog: http://jes.blogs.shellprompt.net
    Work: http://www.apex-evangelists.com
    Author of Pro Application Express: http://tinyurl.com/3gu7cd
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

  • Which metadata table in the BODS repository has data about CPU utilization of every job that gets executed?

    I have to create a performance dashboard where I need to make a graph showing CPU Utilization for individual workloads. If every job corresponds to a particular workload, is there any metadata table that would contain how much CPU Utilization corresponds to a given job?

    If i am not wrong, AL_Statistics and ALVW_History will have details of memory utilization.

  • Custom report for TOP 10 CPU Utilization machines from any group in aggregation last seven days

    I want to create a custom report that contain list of TOP CPU Utilization of machines form any group.This report is create on last 7 days CPU utilization of all machine from a group.
    What  should be query for this report.

    Hi,
    Please refer to the links below:
    SQL Query for TOP 10 Average CPU
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/8d9a2d0d-8761-4d1f-b194-b24aa65172e1/sql-query-for-top-10-average-cpu?forum=operationsmanagerreporting
    How to use Report Builder to create custom reports in SCOM 2007
    http://www.systemcentercentral.com/how-to-use-report-builder-to-create-custom-reports-in-scom-2007/
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • IWS 6.0 100% CPU utilization hanging- very urgent

    Hi,
    We are using Iplanet Web server 6.0 on windows-2000 SP2.The problem we are facing is after 10 concurrent users have logged in the CPU utilization shoots up to 100% and we have to reboot the systesm
    Our billing Application is affected very much due to this.
    Can anybody throw some light on this?
    Thanks in advance.

    Hi,
    Are you using any plugin with iWS. Please let me know your config file. Mean while please check tunning parameters of solaris for Performance bench mark.
    http://docs.iplanet.com/docs/manuals/enterprise/50/tuning/perf6.htm#17580
    Regards,
    Dakshin.

  • Increased CPU utilization on Sup1A after upgrade

    Hello,
    I recently upgraded a 6009 with Supervisor 1A from CatOS 7.6(5) to 8.4(4). Baseline total CPU utilization before the upgrade was about 12%, post upgrade it sits at about 30%.
    We have several similar switches throughout our network that we intend to upgrade as well, so are treating this one box as a testbed. We will soon deploy IP telephones to every desk in our network, and want to determine if this higher baseline utilization will be problematic for us.
    Considering voice, should we be concerned about this? Will any changes due to voice deployment such as many trunks, QoS, etc. cause a significant jump in CPU that might put our baseline even higher?
    Will the higher baseline CPU utilization affect switch performance? I know most forwarding functions do not depend upon the CPU, and are switched via ASIC.
    thanks for the help,
    Brad

    The IDLE_Tasks process on which you are seeing a slightly higher CPU is actually an enhancement that collects information more effectively on crashinfo files (files generated when there is a crash on the box). This enhancement went into 8.3(x) and 8.4(x)
    In the past "IDLE_tasks" processing was not counted and therefore belong to the "kernel and IDLE" process (which as you can see in the show proc cpu) accounts the amount of cpu not being used.
    If you are upgrading other 6500's with Sup1a's make sure they all have 128MB DRAM just like this one has.

  • JVM 1.4.x  IE 6 CPU utilization 100% when issue window.print

    I am using JVM 1.4.2_04, IE 6 and WinXP Pro.
    When visiting internet application having applet initialized, and click the PRINT link (window.print()), suppose the print dialog box will be shown, however, the CPU utilization draw up to 100% and the dialog cannot be shown over 10 minutes.
    I had tried with 1.4.1_x, the same result found.
    If using 1.3.1_x on the same application, no problem found, can anyone help.

    case solved, which is due to the bug_id 4942346

  • Does the iphone cpu frequency change when the cpu load is different?

    Does the iphone cpu frequency change when the cpu load is different, or it does not change, stay a fixed frequency? if it changes, how can i get the realtime cpu frequency?if anyone knows,please tell me, thank you so much!!!

    As a general, historical statement Tonefox is correct.  For certain particular cpus woodmeister is correct.  Cpus have historically been single frequency units, though over-clocking has been done for several years.  Doing so pushes the cpu beyond its guaranteed speed, but has tended to work since most cpus from quality vendors will actually operate at higher speeds.  The manufacturer just does not guarantee the results...remember the Pentium fiasco in the early years of that chip?  Today manufacturers are ceertifying particular product lines for over-clocking on a periodic basis.  And that is what dynamic clocking really is, over-clocking but not at a constant clock speed as has been done in the past.
    Much of the silicon on the market will function at higher clock rates, the only question is does the maker guarantee the accuracy and performance at those clock rates.

  • CPU utilization problem with JSF

    Hi,
    I am using MyFaces 1.1.4 and tomahawk 1.1.3.
    I am using EJB 2.0 and weblogic server 9.2
    I have a problem with the performance of my application. The response time for 500 concurrent users is arnd 10sec. However, the CPU utilization normally hits *95-97%.*
    I have disabled all the logging to reduce the file IO. Also, all the code has been optimised. Still the problem exists. Now, I cannot think of any way to overcome this. My project is getting delayed because of this.
    Request you all to pls help.
    Regards,
    Milan.

    What type of server or servers are you using. I am assuming which I hate to do is that your EJB's are for CRUD and you a connection pool. Have tried to optimize the DB connection pool's ?.

Maybe you are looking for